Return Result Based On Multiple Criteria
Sep 19, 2009
I have been trying this for hours but to no avail.
I have a table with 4 columns headers
Name, Amount, Loc and Code
The name may look like ABC 1, ABC 2....
The Loc may be in US, GB...
and the Code may be AA, BB
I need to return a result "Y" if the sum of the amount is > 100
and "N" if the sum of the amount < 100 based on the conditions
of the following :if
1) Name is the same entity, such as ABC 1 and ABC 2 and
2) Loc is the same, US..and
3) Code is the same
I have attached a sample to illustrates the result
View 10 Replies
ADVERTISEMENT
Oct 27, 2006
if Cell F42 contains 50%, then my fomula returns "wrong"
=IF(AND(0%<F42,F42<50%),"F",IF(AND(50%<F42,F42<60%),"D",IF(AND(60%<F42,F42<70%),"C",IF(AND(70%<F42,F42<80%),"B",IF(AND(80%<F42,F42<100%),"A","wrong")))))
how do I get the formula calculate correctly?
View 7 Replies
View Related
Jun 5, 2008
I am trying to lookup two distinct values in two columns (turquoise and green) in 'Cust data' tab and correlate them to the same values in two columns on 'Driver activity' tab, then return a result from column in yellow on 'Driver Activity' tab to populate the driver name in yellow column on 'Cust data' tab.
File is attached.
View 9 Replies
View Related
Mar 18, 2014
I've got a matrix combining actions on the left hand side (Col A) and owners on Cols B to F. I have drop down list for each action/owner combo: N/A, OK, KO, TBD.
Owner #1
Owner #2
Owner #3
Owner #4
Owner #5
Results
Action #1
OK
TBD
N/A
N/A
N/A
OK
[code]....
I would like to create a formula in Col G that does the following:If any of the values in columns B to F equals OK, then OKIf any of the values in columns B to F equals KO, then KO I've been tinkering with multiple IFs and quite rightly got bogged down as too many criteria to take into account...
View 4 Replies
View Related
May 21, 2008
I am trying to write a formula to figure out Body Mass Indexes for certain age groups and whether or not they fall into a High or Low risk category. So, I am trying to write a formula that does the following. I have 3 columns, Gender, Age and BMI. I need the formula to do the following.
IF Gender = M AND Age >18, <39 AND BMI >7%, <19%, Then return an "L" into 4th column
IF Gender = M AND Age >18, <39 AND BMI >19%, Then return an "H" into 4th column
IF Gender = M AND Age >40, <59 AND BMI >14%, <23%, Then return an "L" into 4th column..............................
View 2 Replies
View Related
Aug 5, 2014
How to formulate results of students in excel sheet.
From the attached picture (capture1.jpg) of the excel sheet - The rules of exams are:
1. if candidate scores 50% in all 4 papers, PASS and proceed to next year
2. if candidate scores 50% in 2 or 3 papers + borderline fail in 1 or 2 papers, VIVA VOCE exam for the borderline failed paper (Definition of borderline fail is candidate scoring 45 to 50 marks)
3. if candidate scores 50% in upto 2 papers + borderline fail in more than 2 papers, RE-EXAM
4. if candidate scores 45% in 2 or more papers, FAIL and repeat the year
The rules are in the attached picture flowchart.jpg
I am unsuccessful in writing a formula for such multiple criteria...
View 12 Replies
View Related
Feb 1, 2012
Worksheet 1: In column A I have a people's initials. In coumn B I have text boxes with miscellaneous text. (The same person could have multiple rows within this sheet.)
e.g.
AAA blue
BBB orange
AAA round
CCC smelly
AAA elongated
Worksheet 2 I want to show:
A2 = initials, B2 = first text box associated with that person, C2 = second text box (different row) associated with that person (if applicable), D2 = third text box (different row) associated with that person (if applicable), etc.
e.g.
AAA blue round elongated
BBB orange
CCC smelly
View 3 Replies
View Related
Mar 13, 2014
I have a spreadsheet with several hundred line items that I basically want a summary of.
STRINGS CRITERIA OTHER
string1 criteria1 other2 <---disregard because of other2
string1 criteria2 other1
string1 criteria2 other1 <---disregard because it is a duplicate
string2 criteria3 other1
string2 criteria3 other1 <---disregard because it is a duplicate
string2 criteria2 other2 <---disregard because of other2
string3 criteria1 other1
string3 criteria1 other1 <---disregard because it is a duplicate
I need the formula to return the value in STRINGS & CRITERIA, but I do not want it listing duplicates.
-I need the summary list on a separate sheet
-STRINGS, CRITERIA, and OTHER are all strings
-STRINGS are in alphabetic order
-CRITERIA are listed in groups with regard to their STRING, but not necessarily alpha-order
-OTHER are not in any particular order, but there are only two choices for OTHER
-OTHER: if OTHER=other2, it should not be listed in the results
RESULT
STRINGS CRITERIA
string1 criteria2
string2 criteria3
string3 criteria1
View 1 Replies
View Related
Dec 1, 2006
Please see the attached sheets.
Here's the issue:
On sheet "master" I have a list of goals in column A.
Each has been assigned to at least one person. Each person will have their own sheet that will capture the goals assigned to them. As an example, see Al's sheet.
I am trying to get Excel to look for all of the goals assigned to AL on the Master sheet and list them nicely onto AL's sheet without out blank rows. (and for each, respectively on their own sheet). I could do this with Pivot Tables if the data were displayed differently, but I have been told that I have to display the goal assignments as shown.
I could use "x"s instead of their names to mark the assignment and I could combine the "goal-achieved expectations" and "goal #s" columns if it helps. I am not supposed to use filters either.
Note: Of course, a goal or an assignment could change on the master sheet, but the assignment is more likely to change.
how this done for AL, I can go ahead and create the other sheets.
View 9 Replies
View Related
Dec 19, 2013
I can manage an array formula that returns a value based on a criteria. Simple. But I want to add in an additional couple of criteria. Now I'm stuck....
My sheet looks at a manually entered postcode, finds out what region this is in, and returns a list of postcode I have defined as being in that region. (So the postcode WF1 3JY would return a region of Yorkshire, and list postcodes of WF, BD, L, etc)
I also have a list of engineers, with a column for their home postcode.I want to be able to list all the engineers from my list whose home postcode matches any of the values on the already created list from the postcode and region entered. So far I have this, which finds me all the engineers for just one postcode area.
View 4 Replies
View Related
Apr 8, 2013
Here is an example of the data I get each day Letter order granting Sabine Pass Liquefaction, LLC's et al 4/16/12 request to add an alternate water source etc under CP11-72.Letter order granting Cameron LNG, LLC?s 4/5/13 filing of a request to introduce natural gas or process fluids into the BOG Liquefaction Project under CP12-15.Letter order accepting NorthWestern Corporation's 8/7/12 submittal of revisions to its transmission planning process to comply with the Commission's June 8, 2012 Order under ER11-2932.Letter order approving Public Service Company of New Mexico's 12/7/12 filing of a joint Offer of Settlement with Navopache Electric Cooperative, Inc under ER11-4534 et al. How can I set up my spreadsheet and what formulas can I use to search and return a value for each text string based on the attached table (column B)?
E3a7qta.png
View 1 Replies
View Related
Jun 20, 2008
I have a table with column headings of product ID Numbers (eg.1111) and row headings of Store number (Eg.1) with data showing the time each product was last sold at that store, I need something to consolidate for each store which Product ID's were sold prior to 5pm and what time they were sold.
EG
Store 1 1111 16:40
2222 13:00
Store 2 1111 15:05
3333 16:50
View 9 Replies
View Related
Aug 25, 2006
I would like to be able to use the Vlookup function to return more then one value as a result of the criteria. I have a cloumn of dates that populates the X axis of a gantt chart with data whilst the Y axis will be populated by a site reference resulting in a program of work, the Y axis data is the result of a vlookup function. My difficulty arises however with multiple sites, for instance where two or three sites will be visited on the same day. The vlookup function will only return the first value it finds in a range to the formulated cell. The result being a missing site(s) from the gantt chart / work program. is it possible to return all values to a cell i.e. site1, site2, site3. using a vlookup or do i need to use another method of doing this?
View 2 Replies
View Related
Jul 11, 2012
I have encountered a situation where I need to essentially accomplish a reverse Vlookup (using index match) and return multiple values.
View 1 Replies
View Related
Apr 21, 2006
I would like a lookup that takes multiple criteria and that is not an array formula! Unfortunately I decided to use array formulae and my spreadsheet went to over 45mb!! Not good. I've searched the forum for an answer to my questions but couldn't find any! I've attached a spreadsheet as an example. The examples I am using have {Sum(IF)} formulae in it (array) and I would like to change those to others that will not increase the file size so much and will not take too long to calculate.
Basically, I would like a lookup that will return me the Amount Paid and Full Cost based on the person's name and the date. the data and the results table are both on separate sheets. It would be nice to bring that file's size back down to less than 4mb!!
View 7 Replies
View Related
Nov 7, 2013
I use the following formula in excel 2007 (and it's working perfectly in 2007) but this formula does not work if I work with the same file in excel 2003 ...w why and what I have to adjust?
=IF(SUMPRODUCT(--(C5='sheet 2'!B:B);--(C13='sheet 2'!C:C);ROW(B:B))=0;"not found";INDEX('sheet 2'!D:D;SUMPRODUCT(--(C5='sheet 2'!B:B);--(C13='sheet 2'!C:C);ROW(B:B));1))
(I'm working with the dutch excel version so it might be that ";" must be ",")
View 6 Replies
View Related
Oct 21, 2006
I am trying to solve a problem. I am currently using this formula
= SUMPRODUCT(--(Sheet2!B2:Sheet2!B300="MARKETING"),--(Sheet2!D2:Sheet2!D300="200612"),Sheet2!E2:Sheet2!E300)
This formula works for me as it is but I would like to add more months to 200612. I want this to also be 200701 and 200702. In another cell there will be up to 10 months. Is there a way to do a Vlookup or something that will look up these months in another table, rather than keep typing them out in the formula?? Otherwise my formula will be very long.
So the info looks like this in excel
MARKETING 200612 -10
MARKETING 200701 -25
MARKETING 200708 -50
ECONOMICS 200709 -30
The info goes on and on. The two variables are the MARKETING column and the month column. My problem is that I would like a seperate table that can be the months. So 200612 and 200701 is one table, and 200708 and 200709 is another table. The table changes often so I dont want to mess with the formulas, rather a table.
View 5 Replies
View Related
Aug 17, 2007
I have an excel worksheet that consists of 4 tabs. Each tabs has approximately 60,000 lines of data. The data consists of user id's and menus that correspond to the user id. There are 131 user id's in total. I would like to be able to return all the menus for one of the user id's. If we need to start with one tab and work from there, that's fine.
View 9 Replies
View Related
Mar 3, 2007
Any other day but today (I've been starring at numbers too long) I could do this.
I need a simple formula that will return:
a. 3 if resut is >= $2.5M
b. 2 if over >= $0.5M
c. 1 if
View 9 Replies
View Related
Aug 11, 2014
I am attempting to get an INDEX function with multiple "IF" statements to return more than one result. Building multiple IF statements. That portion of the below formula works. However, I can only get the INDEX formula to return the first, single result.
Formula:
=IFERROR(INDEX(Func_Area,SMALL(IF(Const_Start<=DATE(YEAR($B$2),MONTH($B$2),DAY($B$2)), IF(Cost_End>=DATE(YEAR($C$2),MONTH($C$2),DAY($C$2)),ROW(Func_Area)-MIN(ROW(Func_Area))+1,"")),ROWS($A$4:A4)))," ")
Func_Area,Const_Start,Cost_End are all Named Ranges on Sheet "Proposed". My intention is to return a list of projects on Sheet Test1 for all projects starting construction after a certain date and completing construction before a certain date. I suspect something in my ROWS fuction or ROW-MIN+1 is wrong.
This formula returns the first result in the first row, but every subsequent row is blank...see attached spreadsheet.
View 3 Replies
View Related
Sep 28, 2009
I am preparing an "automated" order form. I have a list of products (ten) in a pull down list, a list of options (3) in a pull down list and a list of the pricing.
So, If PRODUCT_A with OPTION_A, then PRICE = $X.
If PRODUCT_A with OPTION_B, then PRICE = $Y.
If PRODUCT_B with OPTION_C, then PRICE = $Z.
etc.
I want the user to select the product, then the option, and have the correct price "pre-fill" the cell.
View 3 Replies
View Related
Oct 17, 2006
I have four columns, A through D
Column C is returning a simple vlookup of A
I need Column D to return a value where C is TDMA return TDMA or when C is GSM lookup column B compare to tab2 (columns A through L) returning column 12.
View 5 Replies
View Related
Oct 2, 2007
I have a table of repair jobs done over a period of time. I just need to determine during which shift was the repair job done. The time during which the job was initiated is called Notification Time.
If the job was done at, say, 0100 hrs, then it was done during Shift 1 (0000hrs to 0800 hrs)
If done at 0830 hrs, Shift 2 (0801 to 1600hrs)
If done at 2030 hrs, Shift 3 (1601 to 2359 hrs)
I need a formula to allow me to determine the Shift no. by just checking against the Notification Time column.
View 9 Replies
View Related
Oct 26, 2007
I have a spreadsheet where in cell E2 there is a drop down box with the following options to select: Warranty Replacement, Insurance Claim, Billing Issues, Retention Opportunities.
In cell F2 is where wait time minutes are generated depending on what is selected from the drop down box in E2. I am trying to create a nested IF formula for the following scenario:
Warranty Replacement = 20
Insurance Claim = 20
Billing Issues = 15
Retention Opportunities = 20
View 5 Replies
View Related
Dec 18, 2007
I need an excel function for this...
Say,
Cell A2= 8
Cell A3= 1
If A2 < (9*A3), then Cell A4 will say "Plastic", otherwise it will look to the next function, which is If A2 < (10*A3), then A4 will say "Compact", otherwise, it will look to the next one which is If A2 < (15*A3), then A4 will say "Semi-Compact" otherwise If A2> (15*A2), it'll say "Slender". so at the end, Cell A4 can only be one of these: 'Plastic' or 'Compact' or 'Semi-compact' or 'Slender'. How can i combine all the functions together?
View 2 Replies
View Related
Jan 17, 2008
I'm attempting to do the following:
A1 contains names of projects.
B1 contains variances from budgets, being positive or negative numbers.
C1 will contain results.
I need to know which of the B1 cells contain a number equal to or greater than 20%/-20% and output the names in A1 that match the criteria to C3.
View 8 Replies
View Related
Feb 4, 2008
I am currently looking at the workings of a spreadsheet designed by someone else.
First of all i need to know,how these combo boxes are created in the attached sheet,because it cant be edited.in addition to tht in the coloured cell (F17)i'm trying to dereive a formula which is,if (C17 = doll "1"),but its not working.Please someone give me a solution.
View 9 Replies
View Related
May 28, 2008
See the attached file. I think index and match may help me having done a search several times in these forums, but having been trying to do this for several hours I am just struggling to understand each part of the formula unfortunately. I have a list of data (cellsA1 to C33) which I need to use as my source for the information that is displayed in cell I2 based on the two selections made in cells F2 and G2.
I can't use filter and data sort in this situation - I am creating a spreadsheet for someone who truly knows nothing about excel, so I need this to be as simple as pointing and clicking at cells F2 and G2 and the formula doing all other work. Is it possible to do what I am asking for (hopefully the fact that peoples' names are repeated and months are repeated won't cause a problem?
View 4 Replies
View Related
Mar 17, 2009
I have a spreadsheet with three years worth of data for a property I manage. Each column has cost data for the year and the specific department/cost for that year as the row value.
I have a column between the years that calculates the percent of gross revenue for the specific department/cost.
I would like to find (or create) a formula that will compare the percentage (or specific cost) for the three years within the specific row and if the increase year over year over year exceeds a trigger value it returns something (check me out/true/false) whatever.
The cost items for the property are in the hundreds so I'm trying to come up with a way to quickly see what specific cost items are going up (or down) more rapidly then what would be considered normal.
View 7 Replies
View Related
Sep 27, 2006
I have a spreadsheet that give me the percentage difference of two cell say a1 and a2 (=a2/a1)[format as % two decimal places]. The result is on say b5 as a %[format as % two decimal places]. Now on B6 I want to do this:
if B5 is >3.01% then b6 =" Market Test Required"
if B5 is +3% then b6 =110
if B5 is +2% then b6 =106
if B5 is +1% then b6 =103
if B5 is 0% then b6 =100
if B5 is -1% then b6 =96
if B5 is -2% then b6 =93
if B5 is -3% then b6 =90
if B5 is >-3.01% then b6 ="Market Test Required"
So on and so on.... I would really appreciate your help on this issue.
I have used excel for some time now but not with complex formulas or any vb.
View 9 Replies
View Related