How can I select specific values either side of a peak value?
In the attached file I have a peak value of 10 and would like to select both values of 5 so that I can then identify the frequency they occur at.
I am looking to select two values from a range based upon their relationship to the maximum value. In this specific case I am trying to calculate the Quality factor based upon the frequency response of a transducer. So I need to identify the Maximum impedance and its corresponding frequency. I also need to identify the 3db points either side of the maximum impedance.
The 3db points are found at 2/3rds of the maximum value of the impedance (Impedance Mag in attached spreadsheet). Calculating the first 3db point isn't overly difficult as I just calculate the value for the 3db point and use the MATCH function to find the closest Impedance value and then work out the corresponding frequency from that. I am stumped as to how to calculate the second 3db point (above the Max impedance value). I have attached a spreadsheet with frequency information in column A, the other columns are used to derive the values found in columns M (Impedance Mag) and N.
Is it possible to compare two columns side by side to highlight/change color of difference between the two cells
I need to compare and show the changes to the record from previous version and generate a report which will highlight the changes (Rather than just saying that record has changed It should tell what has changed)
For example if the
Column 1 (Previous Version) :The structure contains Wire, Bolt, Stmaps etc
Column 2 (Current Version) : The structure contains Wire, Bolt, Stamps etc
Data Changed: YES
In report is should show two columns side by side and in Column 2 it should highlight "Stamps"
Is there a way to have separate Report Filters for each column in a pivot table?
I am trying to create a pivot table with 3 columns - 1: account code 2.current year (2011) 3. prior year (2010)
My Row Label is an account code field - each row is a different account code that sums up dollar amounts for the two financial years. The problem is that I need Columns 2 and 3 to have separate Report Filter criteria. So in Column 2 - I need the filter to weed out anything that is not 'Financial Year 2011'. In Column 3, I need the filter to weed out anything that is not 'Financial Year 2010'. Setting up a filter for one screws up the second, and vice versa.
Alternatively, how can I make two side-side-pivot tables that each have their own Report Filters?
I have two sheets that need to have unique partial matches aligned side by side. My first sheet is my database. The righter most column of this sheet contains a unique combination of letters and numbers.
My second sheet contains a single column which I export each month from our CMS and is a list of URLs. Within each of these URLs appears the unique set of letters and numbers from sheet 1 (and only appears once).
There are about thrice as many URLs in sheet 2 as there are entries in my sheet 1 database.
Ideally, I would like the URL from sheet 2 that contains the unique combination from sheet 1 to be pasted in the cell immediately to the right of the given unique combination.
However, I will settle for a list of trues and falses next to the URLs in sheet two that I can erase the falses, sort and paste next to the sorted list from sheet 1.
i have 2 excel worksheets. One of them contains over 20,000 rows of entries (old side) and the other contains about 900 rows of entries (new side). Both contain the same 9 column headings. I've shortened the list in my workbook example.
What i need to do is excel to delete any row on the old side that is not contained on the new side. I don't need the rows to match fully but the column A's (Doc number) are what i want it to check against. I've included a summarised version of the database and the old and new are separated by a heavy blue line. Need to be left with the same rows on either side of that blue line at the end.
I'm trying to figure out how some conditional formating and I cant get it to work.
What I want is for column H to be highlighted based on the value of column I.
So... If I2<721, then H2 will highlight green. If I2 is between 721&780, then H2 will be highlighted yellow. And if I2>780, then H2 will be red.
I know how to do it one cell at a time, but I need it to apply to the entire column based on the cell next to it.
Also, I dont have access to visual basic.
I need function that swaps text from side to side. Text at the left of "x" should be placed at the right side of the "x" and from right to left side:
6x15 -> 15x6 plaah plaah xsomething -> somethingxplaah plaah How to do this?
I have a sheet with a number of repeating blocks copied down.
I would like a macro that when I select the first block, say range "A1:D30", the macro will cut the blocks below and put them side by side, so that I can compare them across.
i.e cut "A31:D60" and put it in "F1:I30" and so on ...
I have created a spreadsheet that has information about networks, subnets etc..
The top header for both companies in (CSV format) reads:
Network Namenet_addr1net_addr2net_addr3mask_lengthorg_idcidrlast_upd_dt
I basically split the spreadsheet to show both side by side.
I have this information for both networks that I am trying to compare what subnets, names, IP address etc... over-lap.
We are merging two companies into one, and I need to identify or highlight what information on both companies over-lap.
I've been given a spreadsheet that is poorly constructed but I'm not allowed to alter.
The layout is:
Box Name Box Date ID1 ID2 ID3 ....
Where there is not a fixed number of IDs in each box
(There are five different sheets so I'll have some fun concatenating results)
Given a list of IDs I need to return the box name and box date that the ID's file sits in. The spreadsheet has blanks everywhere and the numbers contained in rows are non-consecutive and smaller values can appear later in a column than larger ones.
I think I need some combination of index, offset and maybe sumproduct? TBH, I avoid sumproducts like the plague, preferring to utilise sumifs and dynamic named ranges since this improves clarity so I'm basically a newb at them.
Any skeleton framework that you think would work to return the text values for the LHS where the number could be anywhere? Once I can see a rough example I should be able to get to grips with the logic and wrangle it into the necessary solution.
why a person such as myself cannot have two or more Excel Docs on the screen side by side at the same time? And if it can be done, how do you do it?
View 9 Replies View Relatedon the attached workbook i have date on the left jand side and some info from this data will be produced on the right hand side.
Can i have the worksheet so that if the user scrolls down the data on the left the info on the right is still in view?
i have a matrix
index| a| b| c|
0001 |1| 2| 2.22| ( probably it will be much clear to see the attachment)
I need to lookup for the largest number in B2:D2 (in this case 2.22) and return the corresponding header ("C"). I though it would be simple with hlookup() and max() but i can't make it work.
If I have names in one column and amounts in the next column, how do I determine the maximum of the amounts and return the associated name from the other column?
View 2 Replies View Relatedi have a sheet that contains side-by-side,below two formatted colums which has continuous weeks appearance(named PE sheet). i wanna to rearrange the colums to be a single top-down colums according to continuous weeks(named sheet2.are there any easier and faster techniques?a macro probably or a function? arrange(english).xlsm
View 1 Replies View RelatedFormula to return the max of certain data.
This is data for an electric car. T= Trip and C=charge.
Column F is the parking time between Trips (T).
For each "T" event in column E, I would like to return the MAX parking time available before the last "T" event for that day (date). I've highlight the last "T" events in red.
I have attached an example : forum2.xlsx
Column G is an example of the output that I would like to achieve.
Note: For the last "T" event of the day it can just return the actual parking time (shown in green).
What I'm trying to do is get the MAX function to return a value, but that value needs to come before the values reach zero. It's a cubic equation that basically starts, at the beginning of the data range, under 10 then hits zero and ends up near 30 at the end of the data range. The end data range max doesn't matter to me if the data range hits zero along the way. Is there any way to make the MAX function stop at a certain value, or is there another function that could accomplish what I'm trying to do?
View 5 Replies View RelatedI am currently using an array to return the MAX date value. This formula will enter 1/0/00 if the referenced cells are blank. I'd like the furmula to LEAVE THE CELL BLANK if the referenced cells are blank. {=MAX(IF(Bid_Circuits=$A45,Bid_Trim_Completed,""))}
View 5 Replies View Relatedi have a spreadsheet like the following
A B C
Country Revenue Month
1 UK 10 Jan
2 France 20 Jan
3 US 30 Jan
4 UK 25 Feb
5 US 35 Feb
6 France 5 Jan
and so on...
So where country = UK, France or US I want to retrieve the MAX revenue from all months and which month it was in. Eg UK max revenue was in Feb of 25. I am not sure how to apply the max formula with criteria. Is there any way to do this?
I am writing a VBA function that will search for a value in a column(say column B) in a table. This column can have duplicates. So my search needs to get all the records that match the value (including duplicates) and from these records i need to return only one value among records fetched that has maximum in another column in the same sheet(say column D).
Eg :
sno dept name marks r1 cs sush 55 r2 ece ram 68 r3 cs harish 77 r
So if i give "cs" value to search it must give me 77 as output. I tried to write my own Lookup function but isn't working and getting #value.
Please see attached file which is data for horse races (this is a small example of the data i will be working with). I need to find the largest values from the MIN and MAX column (shaded Grey) range for each race. I want to be able to add a function that will allow me to quickly identify which horse has the largest number in both the MIN & MAX columns example on spreadsheet is highlighted RED. It would be handy if it would inform me if the criteria has been met by highlighting it or by placing some text value in an adjacent cell on my spreadsheet i have used the example "Y".
It would also be beneficial if that race be deleted in its entirity if there are no horses which meet the criteria above or similary if all other selections within that race be deleted if ther is a horse which meets the criteria. If there is a selection within that race i will need to keep the row that includes the heading which is coloured blue on the attachment.
I will be working with 20,000 or more selections at a time so it is important that they can be identified quickly for ease of use.
I have tried the functions i know such as MAX and LARGE but this requires me to do alot of work when you consider the ammount of data i'm required to work with.
I have searched your forums and thought I had found a sufficient answer but could not get the vba to work. So any help is greatly appreciated. I am trying to determine a max value from a list then put that value in a cell. Next I want to determine how many times and on what day that max value occured. From there take the value and concatenate them adding a "," between them I have attached an example. I would like the values placed in cells F1 and H1 (the other is a min value and when it occurred)
View 4 Replies View RelatedIn attached example, I have 3 columns of fractions with a final row of sumtotals (taken from elsewhere). I test to see which column has the maximum value in each row and allocate the result with the column's heading. Sometimes, two or more columns have the same max value. In this scenario, I wish to select the column heading that has the largest sumtotal.
View 4 Replies View Related* I hav two columns B and N having some data. From column N i need to find the Maximum valued cell.
* And now i need the content of a cell in column B in the same row , which matches with maximum value.
I have inventory in 9 cities. Cities names are in B2-J2. Line items are rows 3-100
In column K, I have the max formula for that row. What I need is, in column L, the name of the location city from row 2 where the max qty is located also color the max qty in the row.
I have two columns of numbers in column A & B. In column A I am trying to locate the maximum value and get the cell address of the number next to it in column B. I am currently using this formula to do this ..... =ADDRESS(MATCH(MAX(A1:A4),A1:A4),2,4)
It works ok, but if the maximum number is the first value in the column it is returning the last cell address in column B. I am not sure what I am doing wrong.
i'm looking to return the cell address of the max number in a given range?
View 3 Replies View RelatedI am a novice to VBA in excel, i have a table of more then 5000 rows. I would like to find a maximum value from each row and return the column title as "GL_Weld" or "Bend" or "Header" into another worksheet cell. i.e First Row max value = 0.011510 should return "Bend" into another worksheet
GL_WeldBendHeader
0.0001700.0115100.000500
0.0000000.0007800.000000
0.0002400.0110700.000480
0.0000000.0006600.000000
0.0000000.0037700.000000
0.0000000.0000100.000000
0.0002800.0108700.000480
0.0000000.0007100.000000
0.0002000.0112900.000490
0.0000000.0008400.000000
000.00002
00.000310.00001
000.00004
00.00030.00002
000.00001
00.000270.00003
000.00002
00.000260.00004
What I am try to do is look up the highest (maximum) date in a lookup up that has multiple results.
Please see attachment.
Column in question is 'U' (FinishDate)
Maximum date that I want to recover is in column 'P' (DATE_COM)
LOOKUP VALUE is found in column 'A' (QUOTE_NUM)