i have a user form in my spreadsheet that uses option buttons and text boxes for user entry. i need to take the values and true false entries from the option buttons and place them in cells. i am alittle lost with this.
View 6 RepliesI'm trying to use option buttons to create a text entry in an adjacent cell.
Selecting Option Button 1 puts "GPM" in cell F23. Selecting Option Button 1 puts "lbm/hr" in cell F23 (The option buttons are from the control toolbox)
I receive ""Run-time error '424': Object Required"" and first line is highlighted- here is copy of
Sub FlowUnits()
If OptionButton1.Value = True Then
Sheets("Main Screen").Range("F23") = "GPM"
End If
If OptionButton2.Value = True Then
Sheets("Main Screen").Range("F23") = "lbm/hr"
End If
End Sub
Is there a way to set up a "watch" on a cell so that if you type in a different number on a cell, OptionButton1_Click() gets activated? Example:
A9 = 12.0104
OptionButton2 is active.
In Cell A9 you type "25.0508". OPtionButton2 becomes inactive and OptionButton1 becomes active. I already have the buttons linked, i just do not know how to make the button get triggered if A9 changes.
see the attached below.
A few things to sort if I may
How do I get the listboxes to pre-populate based on the Userid and Option Button selection? Furthermore, write back to the correct cell once the selection has been made?
How can I get the combobox to remove blanks in the Userid? (if each cell in row2 has to be populated then so be it)
ToolMatrix3.xlsm
I would like to set up some option buttons so that the will be become visible and enabled when a check box is checked, and the opposite when the same checkbox is not check. This is my problem
Private Sub cbpDiscAlum_Click()
Dim myOption As Control
Dim myValue As Boolean
myValue = cbpDiscAlum.Value = True
If myValue = True Then
For Each myOption In pDiscounts.Controls
myOption.Visble = True
myOption.Enabled = True
Next myOption
Else
For Each myOption In pDiscounts.Controls
myOption.Visible = False
myOption.Enabled = False
Next myOption
End If
End Sub
It is the 5th command where it gets hung up: For Each myOption In pDiscounts.Controls. I am sure I am spelling both of the names correctly: the checkbox, and the group name.
I have a frame (Frame1) on a userform added using Microsoft Forms 2.0 Frame. I have added option buttons to the frame named OptionButton1 thru OptionButton4. I am trying to add code where certain cells are copied and pasted depending on which optbutton is selected. I tried the following code but because the option button is a frame object it doesn't seem to trigger the event.
Private Sub OptionButton1_Click()
'copy level 1
If Me.OptionButton1 = True Then
Worksheets("Sheet1").Range("G10:G32").Copy
Worksheets("Sheet1").Select
Worksheets("Sheet1").Range("C10:C32").Select
Selection.PasteSpecial Paste:=xlPasteValuesAndNumberFormats, Operation:= _
xlNone, SkipBlanks:=False, Transpose:=False
End If
End Sub
I am trying to make an option button visible only when a cell has a value, I understand that this will have to be done in VBA. So I have a value in C10 on page "Edit" and I only want my option buttons to appear when this cell has a value.
What I am trying to accomplish is the ability to insert a value into a cell if an option button is selected. If the option button is not selected I want there to be a different value in the cell. This is what I have so far:
Sub OptionButton2_Click() Range("F8").Value = "$299" End Sub
What I am having issues with is the "else" clause. I want the value to show $0 if the option button is not selected. I attached a screen shot for reference.
I have a series of 12 option buttons on my spreadsheet named Opt_1 thro' opt_12. Whenever one is pressed, I want to invoke code to action the following:
change forecolor of non-selected option buttons to yellow
change forecolor of the selected option button to red
Enter in Cell A1 the number of the option button slected
So, for example, if Opt_4 was pressed, then
Opt_1 - Opt_3 & Opt_5 - Opt_12 forecolor = yellow
Opt_4 forecolor = red
Cell A1 gets the value of 4 entered into it.
I know how to do this on a user form, by putting the option buttons in a frame and then picking up the array value of the option button, but I have these directly on my spreadsheet next to 12 cells as this is more relevant to my application.
I thought of a Select - Case statement, but this will be rather lengthy. Have you any suggestions on how to tighten this code down.
I received this code from an example I found once upon a time that was originally submitted by someone else. Right now the code enters the current date in a cell of the same row as the checkbox when it's checked. I need to revise it, or come up with something similar, that will reference the value of a cell when it is in the same row as the button (from the Forms toolbar) that is clicked to activate the macro. First of all, I don't know how to reference a Forms button in VBA.
Sub Process_CheckBox()
Dim cBox As CheckBox
Dim LRow As Integer
Dim LRange As String
LName = Application.Caller
Set cBox = ActiveSheet.CheckBoxes(LName)
' Find row that checkbox resides in
LRow = cBox.TopLeftCell.Row
LRange = "B" & CStr(LRow)
'Change date in column B, if checkbox is checked
If cBox.Value > 0 Then
ActiveSheet.Range(LRange).Value = Date
'Clear date in column B, if checkbox is unchecked
Else
ActiveSheet.Range(LRange).Value = Null
End If
End Sub
Here is some other code I already created. Unfortunately, because I don't know how to do the row reference, I had to create 25 different macros, which just bulks up the size of my file and slows it down. But here is what I'm trying to accomplish in my macro:.............
In Excel 2003 VBA, what is the syntax for controling an Option Button or Checkbox by name or caption
I have tried the following but has an error, I am sure this is a simple one.
I'm trying to replace a bunch of checkboxes on a sheet with a bunch of Form Control Option Buttons. The problem I'm having is every option button I add seems to be grouped with all of the rest of my option buttons. If I add buttons 1 & 2, I need those 2 grouped together, and when I add 3 & 4, I need those grouped together. Currently it's grouping all 4 buttons together so 1 - 4 are linked, but I need 1 & 2 linked together, and 3 & 4 linked together. I've tried grouping, but it still doesn't function how it ought to.
View 13 Replies View RelatedNot sure how too do this, here is a simple example of what I want too do. Just using different buttons to post a number.
View 6 Replies View RelatedI have a worksheet where the user selects between two option controls, which are mutually exclusive. when they toggle an option, a user form pops up, depending on which option they selected, and askes them for a number, which is used in a calculation elsewhere in the page. The user form has a cancel button, in case they decide to back out. If they cancel, I want the option buttons to reset back to their original state.
The problem I'm having is that when I code it, if you select cancel on the user form, it causes the option to revert back to it's previous state, but that triggers the selection of the option again, which pops up the form, making a neverending loop! Is there a better way to do this? I tried it with a toggle button, with the same results.
I have user form with 5 OptionButtons in one group called Group1 and another 5 in Group2.
I need that those 5 OB in each group had value from 1 to 5 and then user selects one OB it will inset that value (not TRUE or FALSE) into cell and same with Group2.
Private Sub CommandButton1_Click()
Cells(ActiveCell.Row, "E").Value = Need value of Group1
Cells(ActiveCell.Row, "D").Value = Need value of Group2
End Sub
I am looking for Multiple IF formula that linked with options button.
If D10=True 16+(C12*2.10)
If D11=True 14+(C12*1.6)
If D12=True 12+(C12*1.3)
If D13=True 10+(C12*1.15)
If D14=True 16+(C12*2.10)
From D10 to D14, there is always one True and others are false.
Working on a project for a client, and I have two option buttons set up on the spreadsheet, grouped together with a frame and linked to the same cell. Working on the sheet on my computer, the button on the left gives me a value of "1" and the button on the right is "2". When I email the spreadsheet to my client, the buttons reorder themselves, so that the button on the left gives him a value of "2" and the button on the right is "1". Is there a way to prevent this?
View 1 Replies View RelatedIn ThisWorkbook Userform2 is triggered upon a double click
Private Sub Workbook_SheetBeforeDoubleClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean)
UserForm2.Show
End Sub
Userform2 has Frame1 (Option Buttons 1-6) and Frame2 (Option Buttons 7-12)
Private Sub OptionButton1_Click()
Call ProjectBuildings
Range("A1").Select
End Sub
Private Sub OptionButton10_Click()
Call BondIndustrial
Range("A1").Select
End Sub
The user can click away and things work great. The macros that are triggered search a number of Workbooks and individual Worksheets looking to select either of two (hence the two Frames) specific items.
If the user clicks any Option Button in Frame 1 (works) then any Option Button in Frame 2 (works) then goes back to the same Option Button in Frame 1 (nothing) I have a problem.
How do I clear the first Option Button in Frame 1 after the user selects another Option Button in Frame 2?
When I press a command button I want to:
Uncheck a checkbox made with Control Toolbox
Check a particular Option Button within a group box made with the Forms Toolbar.
EDIT: Clarification, I want both things to happen when I click one button.
I am working on a grading sheet for our company. I would like users to choose from an option button choice (A, B, C, D, F) for each grading category and I would like to write that to a sheet that corresponds with the graded person. The form will have next and previous buttons to move through the grading process - when previous is chosen I would like the option buttons to populate what was stored in the data sheet. I think I can mottle thru the code individually but with 60 option buttons it may take quite some time.
Can I call an option button choice by "Group"? I started coding individually, but it will take a lot of code - surely there is a more efficient answer. A picture of my form is attached at the bottom of this post.
VB:
Private Sub OptionButton1_Click()Dim Grade As String
If Me.OptionButton1 = "A" Then
Grade = "A"
Else
Grade = ""
End If
untitled.jpg
How to retrieve the option button value from outside the userform (not inside the userform).
I mean from the main module i want to retrieve the value selected.
E.g.: Optionbutton1 Optionbutton2 Optionbutton3
If i select Optionbutton1 then i want to retrieve this value from outside the userform.
For reference i have attached the excel file wherein I have created the three userforms that is:
1. password (to mask the password
2. ChaseRecons (to use the option buttons)
3. Userform (to display the logo and selet folder option).
In userform Named ChaseRecons i have created three option buttons & want to retrieve the value of these from outside the userform not from the inside.
If i use (If ChaseRecons.optionbutton1.value=true then) its working fine inside the userform but not outside the userform.
I cant get this to work, it comes back with run-time error '424': object required
I am using form controls option button not activeX controls.
HTML Code:
Sub OptionButton12_Click()
If OptionButton12.Value = True Then Range("D14").Value = "Alamo"
End Sub
Sub OptionButton13_Click()
If OptionButton13.Value = True Then Range("D14").Value = "ERAC"
End Sub
Sub OptionButton14_Click()
If OptionButton14.Value = True Then Range("D14").Value = "National"
End Sub
I have two option buttons on a user form, one for a temperature of <250 & one for a temperature >250. I want the option button >250 to be greyed out or have it so that you cannot choose it & option button <250 selected if a certain criteria in a list box is selected. The list box is called Valve_Model & the criteria i want it to work on is if the valve model HPBV Soft is selected & HPBV Soft AC.
View 14 Replies View RelatedAll I want to do is create a group of 3 option buttons in an excel worksheet for a user to select one of two farm programs or none. (CIG or MRP or None) When a user makes a selection either CIG or MRP or None appears in a designated cell. I even used code in the VB editor help but it only shows how to operate one button (which is absurd.) I found an example using 2 buttons, but that wouldn't work either. Found a tutorial using 3 buttons and that wouldn't work. Is this a conspiracy? Every time I try to find help to do something simple in excel lately I hit a brick wall.
View 9 Replies View RelatedI have an option button control on a spreadsheet and I can't seem to remove it from the sheet. I can't right click on it, I can't delete the rows it is in.
View 3 Replies View RelatedI need a little help here as I am trying something new, and am not sure how to proceed.
I am trying to change from 2 columns to 3 columns where there are a few variables. This is the original:
I want to add a secondary function to these buttons; this is a necessary function for every order, so I want to make it necessary to click one of the buttons for every order. One way to do this would be to leave the button unchecked.
How could the button be set to leave itself unchecked after being clicked on?
How do I insert list of data from a worksheet into an option button?
View 3 Replies View RelatedOPTION BUTTON
Using the Forms toolbar control, NOT ActiveX, in Excel 2002 (XP Home) to make on option button, how do I obtain more than just one option? I can draw the outline of the button and I can rename the option but I don't know how to get more than one. I'm totally green to VBA/macros/code/etc. so please keep it SUPER SIMPLE.
I'm hoping that by selecting one of 4 options, IF formulas elsewhere in my workbook (spread over multiple sheets) can be fine tuned.
For Instance: if option 1 is chosen (on sheet 1), =sheet2!(randbetween(3,24)). if option 2 is chosen, =sheet2!(randbetween(3,30)), etc.
I'll then record a macro that will take it to a Value using CopyPaste Special. Unless there is slick way of stopping the cells from rerandomizing when the sheet is recalculated.
CHECK BOX
I hope to use check boxes, to help me CONCATENATE stuff elsewhere in my spreadsheet.
For Instance: if checkbox 1 is checked (on sheet 1), =sheet2!(conc($D$11&"
whatever is associated with the check box). if check box 2 is checked, =sheet2!(conc($D$11&" whatever is associated with the check box), etc.
I would like a VBA code that will display a large input box with multiple inputs boxes inside.
I have shown below the variables required (column C) and the default values (Column E). There is a combination of dates, percentage and numeric values....