Return Intersecting Value?

Sep 21, 2012

Formula will go in cell H3 of Sheet 1.

I need to lookup cell H2 in column C on Sheet 2 and cell A3 in row 1 on sheet 2 and return the value at that intersection.

Is this doable?

View 3 Replies


ADVERTISEMENT

Return Range From Intersecting Cell

Aug 15, 2009

Here is a sample of what I'm working with: ...

View 9 Replies View Related

Excel VBA Not Intersecting?

Jun 7, 2013

My code below works. My question is when to use code below?

Code:
If Not Intersect(Target, Range("StartDate")) Is Nothing Then Exit Sub

My original code that works. If I use code above then I get into continous loop.

Code:
Private Sub Worksheet_Change(ByVal Target As Range)
'Ranges Do Not Intersect! then Exit vba
If Intersect(Target, Range("StartDate")) Is Nothing Then Exit Sub

[Code].....

View 4 Replies View Related

Formula For Intersecting Cell

Oct 29, 2013

What is the correct function (vlookup, hlookup, index, match, etc.) to use to find the intersect cell.

For example, I need a formula that will find the corresponding intersect cell for 35.0 in the red header and 31.5 in the blue column, equals 37.3 (which would be L5 on the worksheet).

°F
30.0
30.5
31.0
31.5
32.0
32.5
33.0
33.5
34.0
34.5
35.0

[Code] ......

View 8 Replies View Related

Lookup Intersecting Data

May 9, 2007

I have a sheet(A) that I input items into cells B19:B49. Sometimes cells are left blank because there's no data to input. In cells A19:A49 I use to input remarks regarding what was put into it's adjacent cell.(B19:B49)

On a seperate sheet(B) I've labeled colums with items that I input into the cells B19:B49 on sheet(A)

let's say I title a column "Toys" and a row "Aisle 1". Where these intersect I want to display the information from sheet(A)'s remarks section cells A19:A49.

View 9 Replies View Related

Find And Insert Intersecting Values

Oct 6, 2009

I have a spreadsheet named: PartNumVsJobNum

The rows, from row 3 down in column A contain part numbers.

The Columns, in row1, from B to (last column with data) contains job numbers.

On another sheet, named: Non_Completed. I have the part numbers in column A (as in the PartNumVsJobNum worksheet). In column E down are
Job Numbers (IE: 4PZ). In column G are quantity values.

So for instance if Cell (A3) = 360010 (first part number listed)
and Cell (B1) = 4PZ I need a macro the will find the rows with 360010
in Column A on sheets( Non_Completed) and try to find the job number (4PZ)
in (columnE) for one of the rows. If the job number is found, then the value
in G of the (Non_Completed) sheets should be copied to the corresponding XY
cell in the PartNumVsJobNum spreadsheet.

I will need to do this for each job number on PartNumVsJobNum Sheet.

I'm attaching a sample worksheet below.

View 14 Replies View Related

Intersecting Ranges In Owcspreadsheet Object

Jun 6, 2007

I am trying to do some data validation on certain cells in an OWCSpreadsheet object embedded in a userform. To check if the activecell is in the range to be validated, if tried to use

With ssSubjects.activesheet
If Not intersect(ssSubjects.activecell, .Range("$C$2, $D$2:$D$151")) Then
msg "error message..."
endif

in the SheetChange event handler for ssSubjects. It gives Runtime Error 5: Invalid Procedure Call or argument. So I tried to do it with a range with a single area, i.e.

With ssSubjects.activesheet
If Not intersect(ssSubjects.activecell, .Range("$D$2:$D$151")) Then
msg "error message..."
endif

but that gives a type mismatch. Is it possible to user intersect on a OWCSpreadsheet? How could I add data validation to a cell on a OWC spreadsheet? Is it possible? If not, what is the best way to handle data validation.

View 2 Replies View Related

Count Based On Intersecting Attributes

Jan 23, 2008

I have a list of items in a tab of a workbook that has attributes across the top, with an X in the intersection if the item has that attribute. For example:

Items:
Apple
Table
Paperclip

Attributes:
Red
Wood
Small

The Apple might have an "X" in the intersection of Red and Small, and the Table might only have an "X" in the intsersection with Wood.

I have another tab with five drop downs that can either be blank, or one of the attributes. I want to create a formula that will return the number of items in the list that have an "X" for all the attributes selected in the drop down. Therefore if I selected only "Small" and left the other four blank, the formula might return 2, and if I then select the next drop down and select "Red" the formula would now return 1.

Any thoughts of how I could accomplish this? I am thinking of using a SUMPRODUCT and some sort of Index Match to find the value in the cells selected by the drop down. It seems like Index only returns a row though, and not a column.

View 9 Replies View Related

Formula Not Returning The Data In The Intersecting Cell

Dec 31, 2006

The formula should take the info from validation lists in R13 & S13, and match them up in F3:O3 (T1Q2) & C6:C15 (T2Q2) and return the data in the intersecting cell into R9 (Where the formula is kept). In this instance, it should find 1 at I3 and the 4 at C15 and return NN to box R9.

View 10 Replies View Related

Intersecting Points Of Chart Linear Plots

May 10, 2008

I would like to find the intersection points of all of the linesshown on the included chart. If that could be output into a table, by the day, that would be ultimately what I am after. http://bladeseri.50megs.com/Intersects.png. Guess 50megs.com doesn't allow this type of reference. Here is Geocities link http://www.geocities.com/bladex2007/Intersects.png

View 5 Replies View Related

Finding Intersecting Row And Column On Chart Based On Data Input

Feb 22, 2014

In my table I want to create a user form where the individual would enter a number which would correspond for the Header Row.
and
The user would also enter a Number that would correspond for the first main column (Column B).

Based on the numbers entered, I want to find the next highest number.

For example if 61 is entered 66 would be chosen.

-Same would be for the numbers entered to find the column.

Based on the numbers entered I would like to find the intersecting cell.

Basic code I can embed in a user form?

View 1 Replies View Related

Report The Value Of An Intersecting Row And Column, Without Numbering The Row And Column

Dec 19, 2009

# STUDENTS THAT GOT 100% IN EACH SUBJECT IN EACH SCHOOLKKVRockfortCampionENGLISH232013MATHS382518PHYSICS422515CHEMISTRY483020BIOLOGY503523

Consider the above table. Ca someone help me understand how to report the value of the # of students that got 100% (output) in a given school (input 1), and given subject (input 2).

In other words, if the inputs are the following:
Input Cell 1: Rockfort
Input Cell 2: Pysics

Then, Output Cell should report: 25

I know one option is to use the INDEX function, but with index function, I have to provide Row_Num & Col_Num as inputs. That doesn't fit my example above, as my inputs are specific values from the leading row and the leading column of the array in question.

View 9 Replies View Related

Double Click Row To Return Data To Userform For Edit Then Return Back To Sheet

Jan 30, 2014

I am trying to create a data entry sheet to enter quotes on. When a quote is received, I click on my "Add quote" button and a userform appears. Data is entered into the userform (frmEntryForm) and returned back to the next available row.

I also need to be able to:

Edit a row by double-clicking it. When a row is double-clicked, data from that row is passed back to the userform, edited and returned back to the same row (to prevent duplicates).Validate that all fields are complete within the userform where relevant (i.e. if the work is not complete or in progress then the "Invoice Number" and "Actual Cost" fields are disabled and blanked to prevent entry (I think this is almost sorted judging by my tests)

I have attached my sheet : 2014 Gatwick Quote Log (Macro Enabled).xlsm‎

View 14 Replies View Related

How To Return Address Of Column Or Cell Select Not Just Return Value

Aug 18, 2014

How to return address of the column or cell I selected from Application.Inputbox, not just return the value?

[Code] ....

View 8 Replies View Related

Formula: If Value Return Is = To Value Of Cell Above Then Find Return Next Value

Feb 17, 2010

Is there a way with the following formula to tell it that if value return is = to value of cell above then find return next value?

View 6 Replies View Related

Return Top N List & Return Corresponding Data For N

Oct 4, 2009

I am trying to find the largest value, second largest, and third largest value for a column of numbers then return a content value for the adjacent column that contains the name for which each. The problem I am running into is when the second highest has the same value as the highest and also when the third value is zero (n=meaning there are only non-zero numbers for the column). I am using these formulas currently whic work when the numbers are not the same and I have atleast 3 non-zero numbers but I need to modify in order to account for the problem stated above...

View 8 Replies View Related

Pivot Table Chaos: Blank Cells Return 0, Empty Cells Return Nothing

Jun 25, 2009

Hi, I desperately need help with a pivot-table and can't find anyone else who's ever had this problem...I have a very large healthcare data table which for simplicity I will describe as follows. In essence the first two columns respectively are (A) location and (B) month. Let's say the third column (C) is the number of cases of the disease kidpox treated in each health centre during that month. The fourth column (D) is the total number of cases of everything treated during that month in each clinic. The fifth column (E) is the proportion of cases of this disease over all consultations for each health centre and month, and the formula in E2 is .....

View 9 Replies View Related

Return Zero When Then Return Is Not True

Jul 3, 2012

I am using the averageIf function and I need the cell to show 0 when then results are not positive. How to resolve my calculation

=AverageIf(a1:a10,">0",a1:a10) displays #DIV/0!

I want it to show 0 only

View 6 Replies View Related

If Row Contains Value Return X

Jun 8, 2014

I'm working with an ancient greek lexicon, and I'm trying to get all the parsing to line up.

I have a table with

A
B
C
D
E

1
ἀκούω
I hear
present
first person
singular

[Code] ........

I want column F to display "present" if the row contains the word "present", "future" if it contains the word "future" etc

My problem is rather similar to [URL] .........., but I'm trying to search the whole row rather than a single cell.

View 5 Replies View Related

Return EFT Instead Of TFR

Apr 16, 2009

{=(--if(isnumber(search("tfr",c:c)),"tfr","")+(--if(isnumber(search("payment",c:c)),"eft","")","")+(--if(isnumber(search("american",c:c)),"amex","")))))}

I am trying to look up column C and if it contains tfr then return tfr or if it contains payment then return EFT etc etc.

I have also tried using this one as I can use more than 7 criterias. Only problem is that return EFT for all ect where does not contain TFR or payment brings back EFT

=IF( SUM(--ISNUMBER(SEARCH({"Tfr","PAYMENT","AnotherTerm","And Another"},C:C ))),"TRF","EFT")

View 12 Replies View Related

No Below 0 Return

Jan 17, 2010

I need to have a cell value not return - ( of any number) as it effects additional cells calculations the current formula used is =G4/50-SUM(I4:V4) I basically only need it to count down to 0 reguardless of the entries in l4:v4

View 2 Replies View Related

Return Value In Same Row

Apr 25, 2008

I have two criteria that need to be met when running a macro to record a timestamp. First - the timestamp needs to be recorded in the first blank cell in the correct column, based on a selection made in a userform. Second - the next timestamp taken needs to be recorded in the same row as the previous timestamp. The times are being recorded in columns D, F, H, and J. So as an example.....

I record the time in column D, but I skip column F and record the next time in column H. That's fine - the timestamps are in the same row (say row 8). Now I record the time again in column D, one row down (row 9).. But this time I don't skip column F.. the time doesn't get recorded in row 9; it records in row 8.

Sub MacroD()
Dim LR As Long
LR = Range("D" & Rows.Count).End(xlUp).Row + 1
ActiveSheet.Unprotect
Range("D18:D" & LR).Value = Now
UserForm1.ListBox1.Text = "Time"
UserForm1.ListBox1.SetFocus
' UserForm1.Show
End Sub

Sub MacroF()
Dim LR As Long
LR = Range("F" & Rows.Count).End(xlUp).Row + 1
ActiveSheet.Unprotect
Range("F18:F" & LR).Value = Now
UserForm1.ListBox1.Text = "Time"
UserForm1.ListBox1.SetFocus
' UserForm1.Show
End Sub

View 17 Replies View Related

Return Last Value In Each Row

Jul 21, 2009

I have a template that aids in forcasting revenues weekly. Dates (each day of the year) runs down Column "A". Accross the top are the dates for each week (52 dates).

Jan 1, 09 Jan 8, 09 Jan 15, 09 Jan 22, 09
Jan 1, 09
Jan 2, 09
Jan 3, 09
Jan 4, 09
Jan 5, 09
etc, etc, etc

As each week passes, new revenues are fcsted for the balance the year. These number are copy and pasted to the corresponding date in column "A" under the corresponding Row (week of forecast). As time goes on, the data postings starts to resemble a set of stairs. What I want to accomplish is, using a formula in one column I want to pull the last forecasted revenue for each date in column "A"

View 2 Replies View Related

Sum Functions - Add All And Return A Value

Jun 9, 2014

So I have say 1-4 columns that may have an A to describe a student as absent. In the 5th column I'd like it to add all the A's and return a value of 1-4 or if possible... a result that says 4A etc. The column might have another letter in it so i only need to add it up if it has an A in it.

To visualize, i just want to add up the students that have not attended a class.

View 14 Replies View Related

Return Value In Next Cell

Jul 28, 2014

Sheet 1 column A is comprised of several items. Column B is comprised of their prices. If a value from column A is entered into D1, I want the corresponding price to appear in A1 on Sheet 2.

A B
apples $1.00
pears $1.50
banana $0.60
grapes $1.20

If "grapes" is typed into D1, I want $1.20 to appear on Sheet2!A1.

View 3 Replies View Related

Using Date To Return A Value?

Feb 28, 2014

I have a spreadsheet that is imported from Quickbooks Pro 2012, and it comes over with the following date format:

01/27/2014

I need a formula that will read that and return the value of 25th. To explain, any invoice that is created between the 1st and the 10th of any given month should return the value 1st, any invoice created between the 11th and the 20th should return 15th, and any value returned between the 21st and 31st should return 25th.

Where I'm at:

I'm assuming I'm going to want to use an IF function. Since the digits will always return in the same spot (the 4th/5th spot), I know I want the formula to return the value based on that specific value. I have the following formula that provides similar information/functionality, I'm just not sure how to edit it to return those values.

//=IF(LEFT(D14,1)="I","INV",IF(MID(D14,3,1)="-","CC","ACH"))

I have this formula that does something similar to what I want to accomplish, I'm just not 100% how to edit it to find the value that I want, and then return the value that I want. I guess the biggest issue is that I only understand about 85% of what this formula is trying to accomplish.

View 14 Replies View Related

Why Does Mod Formula (1,4) Return 1

Apr 2, 2014

For mod formula (1,4) it returns 1. Why is that? I thought it's supposed to show the remainder. In this case there would be no remainder.

View 4 Replies View Related

Return Next Working Day

Apr 3, 2014

I think this may be impossible but what I am hoping to do is in B3 Return the date that is 3 working days before the date in B2. Working days being Monday to Friday in this case. so if the date in B2 is the 16/04/2014 3 days before this is the 13/04/2014 which is a Saturday so i would want the formula to return the 12/04/2014 which is the Friday. Is this possible?

View 2 Replies View Related

Return To Last Location

Jul 6, 2007

How do I write a VB Script to take the user back to where they came from.

Example:

User is on Sheet 1 and clicks a macro that takes him to Sheet 10.
I need a macro that is on Sheet 10 that takes the user back to Sheet 1.
BUT if the User is on Sheet 5 and clicks on a macro that take him to Sheet 10
I need that same macro on Sheet 10 to take him back to Sheet 5.

View 14 Replies View Related

Dont Return A Zero Or N/A

Jul 12, 2007

I have a VLOOKUP formula and if it looks and does not find a match it will either put a "0" or a N/A. Is there something I can add to it to leave the cell blank if it does not find a match?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved