I am trying to do some data validation on certain cells in an OWCSpreadsheet object embedded in a userform. To check if the activecell is in the range to be validated, if tried to use
With ssSubjects.activesheet
If Not intersect(ssSubjects.activecell, .Range("$C$2, $D$2:$D$151")) Then
msg "error message..."
endif
in the SheetChange event handler for ssSubjects. It gives Runtime Error 5: Invalid Procedure Call or argument. So I tried to do it with a range with a single area, i.e.
With ssSubjects.activesheet
If Not intersect(ssSubjects.activecell, .Range("$D$2:$D$151")) Then
msg "error message..."
endif
but that gives a type mismatch. Is it possible to user intersect on a OWCSpreadsheet? How could I add data validation to a cell on a OWC spreadsheet? Is it possible? If not, what is the best way to handle data validation.
My code below works. My question is when to use code below?
Code: If Not Intersect(Target, Range("StartDate")) Is Nothing Then Exit Sub
My original code that works. If I use code above then I get into continous loop.
Code: Private Sub Worksheet_Change(ByVal Target As Range) 'Ranges Do Not Intersect! then Exit vba If Intersect(Target, Range("StartDate")) Is Nothing Then Exit Sub
What is the correct function (vlookup, hlookup, index, match, etc.) to use to find the intersect cell.
For example, I need a formula that will find the corresponding intersect cell for 35.0 in the red header and 31.5 in the blue column, equals 37.3 (which would be L5 on the worksheet).
I have a sheet(A) that I input items into cells B19:B49. Sometimes cells are left blank because there's no data to input. In cells A19:A49 I use to input remarks regarding what was put into it's adjacent cell.(B19:B49)
On a seperate sheet(B) I've labeled colums with items that I input into the cells B19:B49 on sheet(A)
let's say I title a column "Toys" and a row "Aisle 1". Where these intersect I want to display the information from sheet(A)'s remarks section cells A19:A49.
The rows, from row 3 down in column A contain part numbers.
The Columns, in row1, from B to (last column with data) contains job numbers.
On another sheet, named: Non_Completed. I have the part numbers in column A (as in the PartNumVsJobNum worksheet). In column E down are Job Numbers (IE: 4PZ). In column G are quantity values.
So for instance if Cell (A3) = 360010 (first part number listed) and Cell (B1) = 4PZ I need a macro the will find the rows with 360010 in Column A on sheets( Non_Completed) and try to find the job number (4PZ) in (columnE) for one of the rows. If the job number is found, then the value in G of the (Non_Completed) sheets should be copied to the corresponding XY cell in the PartNumVsJobNum spreadsheet.
I will need to do this for each job number on PartNumVsJobNum Sheet.
I have a list of items in a tab of a workbook that has attributes across the top, with an X in the intersection if the item has that attribute. For example:
Items: Apple Table Paperclip
Attributes: Red Wood Small
The Apple might have an "X" in the intersection of Red and Small, and the Table might only have an "X" in the intsersection with Wood.
I have another tab with five drop downs that can either be blank, or one of the attributes. I want to create a formula that will return the number of items in the list that have an "X" for all the attributes selected in the drop down. Therefore if I selected only "Small" and left the other four blank, the formula might return 2, and if I then select the next drop down and select "Red" the formula would now return 1.
Any thoughts of how I could accomplish this? I am thinking of using a SUMPRODUCT and some sort of Index Match to find the value in the cells selected by the drop down. It seems like Index only returns a row though, and not a column.
The formula should take the info from validation lists in R13 & S13, and match them up in F3:O3 (T1Q2) & C6:C15 (T2Q2) and return the data in the intersecting cell into R9 (Where the formula is kept). In this instance, it should find 1 at I3 and the 4 at C15 and return NN to box R9.
I would like to find the intersection points of all of the linesshown on the included chart. If that could be output into a table, by the day, that would be ultimately what I am after. http://bladeseri.50megs.com/Intersects.png. Guess 50megs.com doesn't allow this type of reference. Here is Geocities link http://www.geocities.com/bladex2007/Intersects.png
In my table I want to create a user form where the individual would enter a number which would correspond for the Header Row. and The user would also enter a Number that would correspond for the first main column (Column B).
Based on the numbers entered, I want to find the next highest number.
For example if 61 is entered 66 would be chosen.
-Same would be for the numbers entered to find the column.
Based on the numbers entered I would like to find the intersecting cell.
# STUDENTS THAT GOT 100% IN EACH SUBJECT IN EACH SCHOOLKKVRockfortCampionENGLISH232013MATHS382518PHYSICS422515CHEMISTRY483020BIOLOGY503523
Consider the above table. Ca someone help me understand how to report the value of the # of students that got 100% (output) in a given school (input 1), and given subject (input 2).
In other words, if the inputs are the following: Input Cell 1: Rockfort Input Cell 2: Pysics
Then, Output Cell should report: 25
I know one option is to use the INDEX function, but with index function, I have to provide Row_Num & Col_Num as inputs. That doesn't fit my example above, as my inputs are specific values from the leading row and the leading column of the array in question.
I need help creating a macro that will search through my excel spreadsheet and for every instance where column A isn't empty it should cut a range of columns from that row and paste them in a different range of columns in the row before it. It should then delete the row that it cut the columns from and keep searching until it has done this for the whole worksheet. I can modify which range of columns are needed, but it has been so long since I've worked with excel macros that I haven't been able to do it.
1) i have office 2003 on a laptop. within powerpoint, i can create a 'microsoft excel chart 11' object. to create a link to the excel data source, do i have to go through the odbc sql setup? it works, but i don't want my powerpoint to be dependent on some excel file somewhere. what are the other options to insert/make a functional pivot chart in powerpoint with the data also within powerpoint? the data as sheet option does not result in the chart being a pivot, it's just a plain chart. it has to be a proper object, not an image paste or a chart that updates links with the excel file open.
2) i have office 2007 on my other laptop. i can not find any suitable object to choose from to make a pivot chart in powerpoint. what's the best way to go about in 2007 version?
3) am i going about this the wrong way with the objects? should i be after vba code?
I have two vertical ranges that I need summarized into 2 adjacent vertical ranges.
" A B C D | SUMMARY model qty| modelqty 1 4.12922.0000| 4.12952.2000 2 2.000012.1250| 2.000025.1250 3 4.12929.0000| 318.0000 4 318.0000| 5 4.1291.2000| 6 213.0000| "
A1:A6 is my SKU's model number B1:B6 is my inventory C1:C6 should contain formulas that result in a summary of the models D1:D6 should contain formulas that result in a sum of the inventory count for each model
In the attached file, I have variable range in column A:B, column C:D and in column E:F
I want a macro to do the following:
Start with sheet "A", select the available range in column A then copy and paste in the sheet "B" but with all the cell values added with the value in H1.
Then in sheet A, simply copy the available range in column B and paste it in sheet B
Do the same until column F in sheet A. Pastespecial if it is odd column. simple past it is even column.
I know the macro code for the simple paste. But I am struggling with the paste special code.
I am having difficulty getting a form to work the way that I would like it to work. I have a form that is used to display questions that my students will be answering. The form also is used to put the answers into a worksheet. I have 2 sheets. Sheet2 has the questions, student answers, and correct answers. Sheet1 is used to indicate correct answers and to keep track of percentage correct. I am fairly new to VB. I have 2 pieces of code that I am going to post. The first one works and the second one doesn't.
This is in the "This Workbook" section and it works. Option Explicit Public intNoQ As Integer Public strNoQ As String Public NumberofQuestions As Integer Dim StudentName As String Dim InputBoxAnswer As String Public Sub Workbook_Open() Application.Visible = False 'Hide Excel Load Questions Load NumberCorrect NumberofQuestions = Worksheets("Sheet1").Range("K3").Value For intNoQ = 1 To NumberofQuestions strNoQ = VBA.CStr(intNoQ) If intNoQ = 1 Then Questions.Controls("QuestionNumberBox").Value = "Question#" & strNoQ Questions.Controls("QuestionBox").Value = Worksheets("Sheet2").Range("B1").Value End If Questions.Controls("CorrectBox" & strNoQ).Visible = True Questions.Controls("CorrectLabel" & strNoQ).Visible = True Next intNoQ...............
I have written this macro to convert into a csv file to run for all defined named ranges in the activesheet. It run jst perfect when I hit SAVE button and it creates that many different CSV files for each named range.
However I am trying to use same macro in the another file and the problem I am facing is there a lot more named ranges and I want to run the macro for only selected NAMED RANGE. In this case 2 Named Range / 24 Named range.
What part of code do I need to change and to what to make it work for just 2 named ranges ?
This code is part of a routine that copies and pastes from CASH RECEIPTS sheet to YEARLY TOTALS sheet in the same workbook. rngCash is assigned as a Range variable.
In the various fixes I’ve tried, the code worked to varying degrees.
Code: Dim Recurring_Total as Range With .Range("A" & Rows.Count).End(xlUp).Offset(,2) Set Recurring_Total = .Range("A" & Rows.Count).End(xlUp).Offset(,2) .Font.Bold = True End With
with the line "Sheets("Hidden Data").cells(rngfound.row, 9) = sheets("data").range("l18")" the error messages states Object Required, but i am not sure what this is trying to say.
any idea's or thoughts would be greatly appreciated.
at the top of the coding i have listed "Public rngFound"
I have inserted a workwook in another workbook that the user will have to edit and save changes from time to. I have the excel file inserted as an object. when I double click it the file opens and I can save changes made.
I'm trying to create a macro that can open the object from other tabs. i used the macro recorder and got this
Range("I21:O25").Select Sheets("Formulas").Select ActiveSheet.Shapes("Object 3").Select Windows("Worksheet in SBATrendReport2010").Visible = True Selection.Verb Verb:=xlPrimary ActiveWindow.WindowState = xlMaximized End Sub
The problem I'm having is I get a error message when I run the macro "subscript out of range.
I have a sub which loads a bitmap image onto a sheet, lets say to sheet1 ,cell B2, the reference sheet1!b2 is held on sheet2 in column A.
how to add a hyperlink to the image so that when it is clicked it looks at looks at the value on sheet2 and creates hyperlink to that cell, effectively selecting the cell underneath the image. I've tried this with text - using the following in a cell:
=HYPERLINK("[LoCQ34.xlsm]indirect(Sheet2!A2",Sheet2!B2) - this works for a text link, using the add hyperlink from the right click menu but doesnt do what I want with a bitmap, and I'm not sure how I'd do this in VB.
So, i would like to know it can it be applied to an image, and how can it be done in VB as the value in Sheet2 changes?
How important is it? I've read some books that recommend it and others that don't even mention it. I have a procedure that uses a lot range, worksheet and workbook variables. Should take the time to set each one to "Nothing"?
I'm writing a little program for a co-worker of mine to make their job a little easiar. Here is the code that I have written so far. The first 2 parts of it work perfectly fine, but if it gets to the 3rd part I get an Object Variable or With Not Set. I understand this is horribly written code as I am kind of a beginner and just do things by trial and error.
