What is the correct function (vlookup, hlookup, index, match, etc.) to use to find the intersect cell.
For example, I need a formula that will find the corresponding intersect cell for 35.0 in the red header and 31.5 in the blue column, equals 37.3 (which would be L5 on the worksheet).
°F
30.0
30.5
31.0
31.5
32.0
32.5
33.0
33.5
34.0
34.5
35.0
[Code] ......
The formula should take the info from validation lists in R13 & S13, and match them up in F3:O3 (T1Q2) & C6:C15 (T2Q2) and return the data in the intersecting cell into R9 (Where the formula is kept). In this instance, it should find 1 at I3 and the 4 at C15 and return NN to box R9.
Here is a sample of what I'm working with: ...
View 9 Replies View RelatedFormula will go in cell H3 of Sheet 1.
I need to lookup cell H2 in column C on Sheet 2 and cell A3 in row 1 on sheet 2 and return the value at that intersection.
Is this doable?
My code below works. My question is when to use code below?
Code:
If Not Intersect(Target, Range("StartDate")) Is Nothing Then Exit Sub
My original code that works. If I use code above then I get into continous loop.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
'Ranges Do Not Intersect! then Exit vba
If Intersect(Target, Range("StartDate")) Is Nothing Then Exit Sub
[Code].....
I have a sheet(A) that I input items into cells B19:B49. Sometimes cells are left blank because there's no data to input. In cells A19:A49 I use to input remarks regarding what was put into it's adjacent cell.(B19:B49)
On a seperate sheet(B) I've labeled colums with items that I input into the cells B19:B49 on sheet(A)
let's say I title a column "Toys" and a row "Aisle 1". Where these intersect I want to display the information from sheet(A)'s remarks section cells A19:A49.
I have a spreadsheet named: PartNumVsJobNum
The rows, from row 3 down in column A contain part numbers.
The Columns, in row1, from B to (last column with data) contains job numbers.
On another sheet, named: Non_Completed. I have the part numbers in column A (as in the PartNumVsJobNum worksheet). In column E down are
Job Numbers (IE: 4PZ). In column G are quantity values.
So for instance if Cell (A3) = 360010 (first part number listed)
and Cell (B1) = 4PZ I need a macro the will find the rows with 360010
in Column A on sheets( Non_Completed) and try to find the job number (4PZ)
in (columnE) for one of the rows. If the job number is found, then the value
in G of the (Non_Completed) sheets should be copied to the corresponding XY
cell in the PartNumVsJobNum spreadsheet.
I will need to do this for each job number on PartNumVsJobNum Sheet.
I'm attaching a sample worksheet below.
I am trying to do some data validation on certain cells in an OWCSpreadsheet object embedded in a userform. To check if the activecell is in the range to be validated, if tried to use
With ssSubjects.activesheet
If Not intersect(ssSubjects.activecell, .Range("$C$2, $D$2:$D$151")) Then
msg "error message..."
endif
in the SheetChange event handler for ssSubjects. It gives Runtime Error 5: Invalid Procedure Call or argument. So I tried to do it with a range with a single area, i.e.
With ssSubjects.activesheet
If Not intersect(ssSubjects.activecell, .Range("$D$2:$D$151")) Then
msg "error message..."
endif
but that gives a type mismatch. Is it possible to user intersect on a OWCSpreadsheet? How could I add data validation to a cell on a OWC spreadsheet? Is it possible? If not, what is the best way to handle data validation.
I have a list of items in a tab of a workbook that has attributes across the top, with an X in the intersection if the item has that attribute. For example:
Items:
Apple
Table
Paperclip
Attributes:
Red
Wood
Small
The Apple might have an "X" in the intersection of Red and Small, and the Table might only have an "X" in the intsersection with Wood.
I have another tab with five drop downs that can either be blank, or one of the attributes. I want to create a formula that will return the number of items in the list that have an "X" for all the attributes selected in the drop down. Therefore if I selected only "Small" and left the other four blank, the formula might return 2, and if I then select the next drop down and select "Red" the formula would now return 1.
Any thoughts of how I could accomplish this? I am thinking of using a SUMPRODUCT and some sort of Index Match to find the value in the cells selected by the drop down. It seems like Index only returns a row though, and not a column.
I would like to find the intersection points of all of the linesshown on the included chart. If that could be output into a table, by the day, that would be ultimately what I am after. http://bladeseri.50megs.com/Intersects.png. Guess 50megs.com doesn't allow this type of reference. Here is Geocities link http://www.geocities.com/bladex2007/Intersects.png
View 5 Replies View RelatedIn my table I want to create a user form where the individual would enter a number which would correspond for the Header Row.
and
The user would also enter a Number that would correspond for the first main column (Column B).
Based on the numbers entered, I want to find the next highest number.
For example if 61 is entered 66 would be chosen.
-Same would be for the numbers entered to find the column.
Based on the numbers entered I would like to find the intersecting cell.
Basic code I can embed in a user form?
# STUDENTS THAT GOT 100% IN EACH SUBJECT IN EACH SCHOOLKKVRockfortCampionENGLISH232013MATHS382518PHYSICS422515CHEMISTRY483020BIOLOGY503523
Consider the above table. Ca someone help me understand how to report the value of the # of students that got 100% (output) in a given school (input 1), and given subject (input 2).
In other words, if the inputs are the following:
Input Cell 1: Rockfort
Input Cell 2: Pysics
Then, Output Cell should report: 25
I know one option is to use the INDEX function, but with index function, I have to provide Row_Num & Col_Num as inputs. That doesn't fit my example above, as my inputs are specific values from the leading row and the leading column of the array in question.
Version: Excel 2007 WinXP
I'm basically looking for something almost like an inverse function to INDIRECT. This function would first look at a cell's formula as a text string, parse out the first valid cell reference in A1 format, and return that cell as a text string.
Detail: I have a spreadsheet with cells that point to other values. I would like to get only the row number from the first cell reference in the formula residing in a given cell. For example:
Suppose A1 has the formula =AL267. and A2 has the formula =SUM(AL94:AL235)
I would like a formula in B1 that returns the text string, "AL267" so that I would know this is the first reference.
Ideally it could be dragged down to B2 such that it returns the text string "AL94" (and not "AL235") because AL94 is the first cell reference in A2's
Currently I am copying the formulas after hitting ctl+` and pasting that text into a text editor, followed by text operations to manipulate the results into the desired values. Any solution that didn't involve going out to notepad.
Note: I know the syntax below is not how you would enter forumlas into Excel but I am using it to quickly illustrate what I'm trying to do and need help with. A cell not in column D, E, or F contains a formula of the form: F=IF(D>0, D/E, "blank") .
Note: If a cell in column D>0 (eg. D5>0) then the cell to the right of the selected D cell (eg. E5) will also be >0 ; otherwise, both cells will be empty.
This is what I want to do: If cell D?>0 , then F?=D?/E? ; otherwise, F?=empty .
Example 1: If D5>0, then F5=D5/E5 ; otherwise F5=empty .
Example 2: If D7>0, then F7=D7/E7 ; otherwise F7=empty .
Etc. I want this to apply to all rows.
I cannot enter the formula directly into the F? cell because sometimes I will need to enter data into cell F? manually. When I need to enter data manually into F? this results in the formula being overwritten by the new data and this means that if I ever needed to have data calulated based on the formula F=IF(D>0, D/E, "blank") I would have to re-enter the formula from scratch over again; obviously this is a nusance.
I have a situation where I have to curve fit data, this can lead to different formulas being used with varying constants.
Is it possible to pickup a TEXT based formula and related constants from other cells, and then place this into another cell as a functioning formula. For Example
Cell A1 contains the formula as a text string whether it be y=a+bx+cx^2, or y=a+b/x, etc
Cells A2:A6 contain the individual constants, a, b, c, etc
I would then want the VBA to read the text based formula and put it into an output cell as a functioning excel formulae.g
In cell B10: =a+b*A10+c*A10^2
I understand picking the constants up and putting the formula should not be too much of an issue, however trying to insert the variable form of the curve fit is the part that I am struggling with, and am unsure if possible.
Here is the scenario:
A B C D
BananasApplesOrangesTotal113=A1+B1+C1
I need to reference the formula in D1 with the cells headers names.
In a perfect world, it would take
=A1+B1+C1:
and produce:
=Bananas+Apples+Oranges
I'm having some trouble trying to get excel to input a formula into a cell. I'm still a novice at VBA right now, so I don't think my problem will be too much of a brain buster.
I want a formula in Cell A6 (and I already know it correctly works) in this format: =E6&VLOOKUP(I6,'FA-Fund Data'!B$1:C$2000,2,FALSE)&J6
I would like to copy a formula in a cell and then paste only the text of the formula, but I can't figure it out. Basically, I would like to avoid going into the cells and absolute referencing or hitting F2, then copying the text.
When I hit "Ctrl C" to copy the cell, then hit "Alt/E/S/F/Enter" to paste the formula, it is just like a regular copy/paste formula-wise in that the references move.
I am using vlookup to get a cell value from another sheet, but if the cell has "&" or "/" I need to substitue "&" and "/" with "and" so that the cell can be added later to a url.
i am using =VLOOKUP(a1,Sheet2!A1:W17968,6) to get the value of a1 in sheet 2 and return the value of column 6
this will return "Audio Cables & Leads" but i need it to say Audio Cables and Leads
I need the formula to also check and replace "/" with "and" as well so cables/wire will be Cables and wire
I'm wondering if it's possible to write a formala that if a certain condition is met, performs a formula referenced in another cell. For example: Column A contains a list of formulas. In column B is the condition, let's use Work Type as an example. The result (or the formula I need) would be in column C. So if the work type is "Type1", then the formula in the corresponding column C cell would perform the formula in cell A5. If the work type is "Type8", then the formula in the corresponding column C cell would perform the formula in cell A2.
Is this possible to do without VBA?
i need a formula for which calculate all cell (calculating years months and days formula). FIND ATTACHED .xls file i need a answer in cell highlited in yellow color.
View 3 Replies View RelatedI have attached a sample of the spreadsheet. The cell/cells in question are f32:f36 on the first tab.
Question #1 how this formula works or what it does.
Question #2 Is when I enter the required information in cells a32:e32 it enters an N/A in cell f32. When I than click on cell F32 and than click on the formula bar and hit enter the information populates.
I have two questions:
1. Is there a way cells with formulas cannot be tampered even if they are not locked? So when I enter a data on a cell with formula, the formula won't be erased? The sample below shows that C1 and C2 has formulas but let's say I enter a value on C1, the formula should still stay? Is this possible?
A B C
1 5 10 =SUM(A1:B10)
2 2 4 =SUM(A2:B2)
2. Let's say I have a total of 125 (A1) and I need to get the answer (B1) where it has 5 with No. 3 on top (subscript) of 5? How to create a formula for this (I hope I make sense)?
In cell A1 exists data. In cell A2, I would like to test A1 to determine if A1 is a formula or a constant.
Examples:
=A9+3 would result "formula"
="1+3 would result "formula"
3 would result "constant"
'Blahblah would result "constant".
I know this is an easy one but I'm unsure why I can't easily modify a formula. The key event in this formula is "+190". Every time I change the value the formula no longer works. I've copied to another cell and the formula no longer works. My question is when you have a formula like this one if you have to modify how do you do it and keep the formula working.
View 9 Replies View Relatedi'm having trouble formating a cell to accept either user input or a equation i've made. i would like it to accept the user input and when there is no input to use the equation i have.
View 8 Replies View Relateddoes such a formula exist? I regularly Change a formula in cell C1. To Show my working I would like to have The formula from C1 written next to it as an equation.
Example: B1 | C1
=Text"updated from formula in C1 automatically" | =x+y*A2
Summarised, is there a formula to Display the formula written in another cell?
I want to use the values in a range of cells in a sheet for a formula in another sheet. The problem is that these range of cells already has formulas and when I select these cells for use in another formula, the values doesn't get picked up and my formula doesn't work. for example -
cell L4 in sheet 1 has a formula - ='H:VK_2011_onwards1_ACC_BJS_SAA 6
and it has a value - 34.76
cell L5 in sheet 1 has a formula - ='H:VK_2011_onwards1_ACC_BJS_SAA 6
and it has a value - 47.09
Now I want to use this two cell to calculate an average in sheet 2. So if I use the formula =AVERAGE(Sheet1!L4:L5). I get no result.
I am using the Networkdays function to calculate the number of working days between a date entered in A1 and a date in B2 and I have a range of holidays called 'holidays' and then have the result placed in E1.
View 9 Replies View RelatedI paste new data into a sheet of a monthly report I prepare. For this sheet, the # of data rows change (and is unpredictable) every month. I need the value inside a specific cell that dynamcially moves up and down based on the # of rows for that month (because it's below the rows of data).
So I made a formula to identify the exact cell # every month.
Example:
This month the exact cell is F255 in the "Refi" sheet.
So my formula in the "Summary" sheet cell A1 first finds the cell row # only (255) and since it's always column F, in B1 I have
VB:
="F" & (A1)
This outputs "F255" in B1, successfully identifying the target cell.
Now how do I write a formula in C1 to grab the value from whatever cell is named in B1. (For this month, the value in cell F255 from the "Refi" sheet)