Find And Insert Intersecting Values
Oct 6, 2009
I have a spreadsheet named: PartNumVsJobNum
The rows, from row 3 down in column A contain part numbers.
The Columns, in row1, from B to (last column with data) contains job numbers.
On another sheet, named: Non_Completed. I have the part numbers in column A (as in the PartNumVsJobNum worksheet). In column E down are
Job Numbers (IE: 4PZ). In column G are quantity values.
So for instance if Cell (A3) = 360010 (first part number listed)
and Cell (B1) = 4PZ I need a macro the will find the rows with 360010
in Column A on sheets( Non_Completed) and try to find the job number (4PZ)
in (columnE) for one of the rows. If the job number is found, then the value
in G of the (Non_Completed) sheets should be copied to the corresponding XY
cell in the PartNumVsJobNum spreadsheet.
I will need to do this for each job number on PartNumVsJobNum Sheet.
I'm attaching a sample worksheet below.
View 14 Replies
ADVERTISEMENT
Jul 5, 2012
I have a table refreshed from a MySQL database that I use to create a report. I can use this data quite well using formulas in the cells.But in order for me to add more information to the report I use without making it cluttered I need to add some data as comments.
I have created a loop that picks up some cell values that I want to use as criteria but I cant work out how to use these variables to search through the table and get the info I require to put in the comment. In a cell I would use offset/match or index/match to get the required cell value but how do I do this in VBA?
View 2 Replies
View Related
Jun 4, 2014
I'm trying to create a macro that when run, scans Row 12 (only after column E), Finds the first empty cell, then inserts the cell value from Sheet4 CellE8. Then the hard bit begins. I need it to insert cell info in all the cells below it, from different locations...
For example
A
B
C
D
[Code].....
In the above sheet, I need it to go to cell D2 and insert the values from Sheet4 CellE8, Then proceed to D3 and insert data from Sheet3 D4, then to cell D5 and insert data from Sheet1 A7, etc etc
I dont mind doing each cell individually, but they will always be in the same column (and row 2 "Value" will always be the one that determines the next empty column).
View 1 Replies
View Related
Sep 21, 2012
Formula will go in cell H3 of Sheet 1.
I need to lookup cell H2 in column C on Sheet 2 and cell A3 in row 1 on sheet 2 and return the value at that intersection.
Is this doable?
View 3 Replies
View Related
Jun 7, 2013
My code below works. My question is when to use code below?
Code:
If Not Intersect(Target, Range("StartDate")) Is Nothing Then Exit Sub
My original code that works. If I use code above then I get into continous loop.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
'Ranges Do Not Intersect! then Exit vba
If Intersect(Target, Range("StartDate")) Is Nothing Then Exit Sub
[Code].....
View 4 Replies
View Related
Oct 29, 2013
What is the correct function (vlookup, hlookup, index, match, etc.) to use to find the intersect cell.
For example, I need a formula that will find the corresponding intersect cell for 35.0 in the red header and 31.5 in the blue column, equals 37.3 (which would be L5 on the worksheet).
°F
30.0
30.5
31.0
31.5
32.0
32.5
33.0
33.5
34.0
34.5
35.0
[Code] ......
View 8 Replies
View Related
May 9, 2007
I have a sheet(A) that I input items into cells B19:B49. Sometimes cells are left blank because there's no data to input. In cells A19:A49 I use to input remarks regarding what was put into it's adjacent cell.(B19:B49)
On a seperate sheet(B) I've labeled colums with items that I input into the cells B19:B49 on sheet(A)
let's say I title a column "Toys" and a row "Aisle 1". Where these intersect I want to display the information from sheet(A)'s remarks section cells A19:A49.
View 9 Replies
View Related
Aug 15, 2009
Here is a sample of what I'm working with: ...
View 9 Replies
View Related
Jun 6, 2007
I am trying to do some data validation on certain cells in an OWCSpreadsheet object embedded in a userform. To check if the activecell is in the range to be validated, if tried to use
With ssSubjects.activesheet
If Not intersect(ssSubjects.activecell, .Range("$C$2, $D$2:$D$151")) Then
msg "error message..."
endif
in the SheetChange event handler for ssSubjects. It gives Runtime Error 5: Invalid Procedure Call or argument. So I tried to do it with a range with a single area, i.e.
With ssSubjects.activesheet
If Not intersect(ssSubjects.activecell, .Range("$D$2:$D$151")) Then
msg "error message..."
endif
but that gives a type mismatch. Is it possible to user intersect on a OWCSpreadsheet? How could I add data validation to a cell on a OWC spreadsheet? Is it possible? If not, what is the best way to handle data validation.
View 2 Replies
View Related
Jan 23, 2008
I have a list of items in a tab of a workbook that has attributes across the top, with an X in the intersection if the item has that attribute. For example:
Items:
Apple
Table
Paperclip
Attributes:
Red
Wood
Small
The Apple might have an "X" in the intersection of Red and Small, and the Table might only have an "X" in the intsersection with Wood.
I have another tab with five drop downs that can either be blank, or one of the attributes. I want to create a formula that will return the number of items in the list that have an "X" for all the attributes selected in the drop down. Therefore if I selected only "Small" and left the other four blank, the formula might return 2, and if I then select the next drop down and select "Red" the formula would now return 1.
Any thoughts of how I could accomplish this? I am thinking of using a SUMPRODUCT and some sort of Index Match to find the value in the cells selected by the drop down. It seems like Index only returns a row though, and not a column.
View 9 Replies
View Related
Dec 31, 2006
The formula should take the info from validation lists in R13 & S13, and match them up in F3:O3 (T1Q2) & C6:C15 (T2Q2) and return the data in the intersecting cell into R9 (Where the formula is kept). In this instance, it should find 1 at I3 and the 4 at C15 and return NN to box R9.
View 10 Replies
View Related
May 10, 2008
I would like to find the intersection points of all of the linesshown on the included chart. If that could be output into a table, by the day, that would be ultimately what I am after. http://bladeseri.50megs.com/Intersects.png. Guess 50megs.com doesn't allow this type of reference. Here is Geocities link http://www.geocities.com/bladex2007/Intersects.png
View 5 Replies
View Related
Feb 22, 2014
In my table I want to create a user form where the individual would enter a number which would correspond for the Header Row.
and
The user would also enter a Number that would correspond for the first main column (Column B).
Based on the numbers entered, I want to find the next highest number.
For example if 61 is entered 66 would be chosen.
-Same would be for the numbers entered to find the column.
Based on the numbers entered I would like to find the intersecting cell.
Basic code I can embed in a user form?
View 1 Replies
View Related
Apr 21, 2014
I have different reports, some have fifty transactions, others have thousands. My goal is to: Insert a new row every time the values in the "Account" column meet a certain criteria, AND THEN add the totals for the Debit and Credit Columns.
Let's say I start with a table that looks like this:
A
B
C
D
Dept
E
Account
T
F
F2
G
Debit
Credit
Total
33010
[Code] ....
I want to group the first four rows because Accounts 33010 and 33015 are in the same department. Same with 50050 and 500060. I want to then insert a row below the last row with "33015" as its Account #. And add the values for Debit and Credit. It'd look like this:
A
B
C
D
Dept
E
Account
[Code] .........
Honestly, I have tried everything. Running a Macros with Relative reference does not cut it.
View 8 Replies
View Related
May 24, 2007
I am creating a worksheet of contacts and the date and time that I phone them, along with their current "status" in our company. I have created a form and have got it to do the insert of new data that I input, BUT What I would really like is enter a "client number" (which is unique) and have it search my table for any record(s) with that client number, and then show me the last record that matches the client number, (this can all be done from within my form) then If I click on the "insert" command button, I want it to insert a new row after the current row and move my form data in the form into the new row which will include a date and time. So, To summarize.....I need 2 similar subroutines.
LOOKUP ----- I need to have my form scan down the data for a match in a particular (pre-sorted) column, stopping at the last line that matches, then display the data or display nothing is there is no match. INSERT ----- I need to have the form scan down the data for a match in a particular (pre-sorted) column, stopping at the last line that matches and then insert a blank row here and move my data into it.
View 4 Replies
View Related
Nov 14, 2013
I`m trying to create a macros that find new cell content in a column and add a row before it.
In the attached file is an example : insert_row.xlsx
In column A is the name of the row. And in some rows the name is changed.
I want to add a row before this change.
View 9 Replies
View Related
Jun 30, 2009
I need to enter text in a cell, then click on a command button that will run a macro to find that text in a column and if found, insert a row and copy down the formulas from the row above.
View 6 Replies
View Related
Feb 24, 2010
I would like to find a value w/i a column after sorting and insert a row right above it. After that I would like to sort again from that point downward.
View 2 Replies
View Related
Apr 15, 2013
I am running a macro which basically is a tidy up of a data report that comes from SQL.
I am on the last bit Every time this tidy up runs there will be a different amount of rows but always the same columns. Under the last row of data I want to put the word 'TOTAL' in that row and column J. Then in the same row but column K I want to put a sum of K2 to that last row. How do I do this?
Here's all my code so far - like I said its basic formatiing stuff I've cobbled together!
Sub usagetidyup()
'
' usagetidyup Macro
'
'
Range("1:4,6:7").Select
Range("A6").Activate
Selection.Delete Shift:=xlUp
Columns("H:H").Select
[Code]...
View 9 Replies
View Related
Nov 3, 2006
I'm having problems with trying to find something in the spreadsheet and inserting a row before it. For example I would like write code that basically goes threw my rows and if it finds the "2800" then it inserts a row before that. I have now bought several books but I have yet to come up with an answer.
View 3 Replies
View Related
May 2, 2007
I'm working on a spread sheet tracking conference presenter so I'd like to come up with a formula and find any duplicate names. I'd be grateful to learn how to do this without hand sorting.
If value in cell A1=y
and a lastname that appears in G1, H1 or J1 appears more than once in the range of cells in three columns - G1:g10, I1:I10, J1:J10
insert in cell B1
the list of lastnames (up to 3) seperated by a colon in G1, H1 and J1 that are duplicated elsewhere.
I'm so happy to find this forum and eager to learn more about excel.
View 9 Replies
View Related
Jan 31, 2013
How to get the GetFromClipboard syntax from here working with my code (below), but am having a really frustrating time. Basically, I need to search for whatever value is copied to the clipboard (as you can see below which will be relative to a certain cell).
Here's what I have so far, and I'm trying to replace the contents of the What:="121212121" part of the Find method to look for the clipboard contents (a 9 char number) in another sheet (where a duplicate exists - the value I am searching will be a unique identifier for the incorrectly created duplicate record that needs to be deleted).
So, What:=<insert number/string on clipboard here>
VB:
Sub DeleteDupes()
ActiveCell.Offset(0, 5).Range("A1").Select
Selection.Copy
Sheets("ActvMbrs_MatchCombos").Select
Cells.Find(What:="121212121", After:=ActiveCell, LookIn:=xlFormulas, _
[Code] .....
View 2 Replies
View Related
Oct 13, 2009
Need a VBA macro that is similar to the subtotals function but without the subtotals? Basically I want the macro to look at column A and say, for each change in column A insert a blank row… I don’t need to worry about the sorting, I just would like to know how I can tell a spreadsheet to look at a column find changes in that column and just insert a blank row. On the second page of the attached spreadsheet is an example of the desired output… I will probably use this for many different spreadsheets so the simpler and more versatile the better, ie I can change the column I want the macro to look at.
View 3 Replies
View Related
Dec 13, 2013
Is it possible to insert a cell refenece into the FIND function.
So, replace JAN-2013 with Sheet1 cell A1
Selection.Find(What:="JAN-2013", After:=ActiveCell, LookIn:=xlValues, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False).Activate
View 3 Replies
View Related
Dec 21, 2013
I have a worksheet with several thousand rows. During a month new entries are added at the bottom of the previous entries. One of the columns for each entry is a stock symbol and I've written a macro to enable going quickly to any specific stock symbol's location by searching for the symbol.
Once a month I select rows for some of the new entries for a given symbol, cut the relevant rows, activate the macro to find the location of other entries of the same symbol, and then "Insert Cut Cells" so as to move the new rows to the same area as other similar older entries.
What I was finding was that activating the macro was causing a recalculation of the workbook, which delays the macro from finding the symbol in question. This was getting bothersome, so I avoided the delay by adding an Application.Calculation = xlCalculationManual to the beginning of the macro, and at the end of the macro I reset the Calculation back to Automatic.
This eliminates the delay, in finding the old symbol, but it also clears out whatever memory location was storing the cut cells, so that I don't have the "Insert Cut Cells" option available once I get to the found location.
So, currently I have either: A) a quick find of the symbol, but I can't use the "Insert Cut Cells" feature, or B) I have a delay in the finding, but am able to Insert.
how I can have the quick find of the macro but still retain the ability to Insert the cut cells ?
View 8 Replies
View Related
Feb 16, 2006
I've got a problem that's causing me a headache. i have a document with 1 column and 4000 rows (its an export from active directory).
I need to do a search cell by cell (so A1 - A4000) for any cells that contain the text "changeType". When a cell is found, i need excel to insert a new row above the current cell and insert the text "modify" into the new row (in the first column).
eg.
x
x
x
changeType
x
x
Becomes:
x
x
x
Modify
ChangeType
x
x
View 7 Replies
View Related
Jan 9, 2007
I am trying to find the first "Tour" after cell A138. If "Tour" is not in cell A177, then I want to insert rows until that "Tour" is in cell A177. How can I do this?
Sub InsertRow()
Dim FoundTour As Range
Range("A5").Select
If Range("A30") = "TOUR" Then
Range("A31").Select
Else
Do While Range("A30") <> "TOUR"
Selection.EntireRow.Insert
Loop
End If
Range("A31").Select
If Range("A40") = "TOUR" Then
Range("A41").Select......................
View 6 Replies
View Related
Feb 11, 2008
I have a macro that was working fine until I added a new column to my active sheet. Now it fails with a run time error 1004, insert method of class failed. The code is as follows:
Private Sub UpdatePart_Click()
Dim S As String
Dim r As Excel. Range
Range("A2").Activate
S = InputBox("Enter the part no. you wish to update")
On Error Resume Next
If S = "" Then 'Exit Sub
'If StrPtr(S) = 0 Then
MsgBox "Update Cancelled"
Else
Set r = Columns(1). Find(What:=S, After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
MatchCase:=False, SearchFormat:=False)...............
View 8 Replies
View Related
Dec 11, 2008
I would like to be able to add vb code to my developing macro that searches within 1 column for the last instance of a particular word, then inserts a blank row under that word. All the data is sorted, so the words will be used multiple times, but I need the row to go under the last instance of each word in the column.
View 14 Replies
View Related
May 15, 2013
I have spreadsheet with data all over. I want a macro which identifies the first cell (in Column A) which has the text "BNY" and insert 6 blank rows above the text "BNY" (First text in the Column).
Once, it is done - the macro should also assign names to the last inserted row.
Column A - Should reflect "Bank", Column B should reflect "Field1", Column C should reflect "Field 2" and Column D should reflect "Field 3".
And after the names are assigned - It should also highlight the last inserted row in Yellow.
For Example:
Raw Data (Snap):
Bank
Field 1
Field 2
Field 3
JPM
123
456
789
[Code] .....
Output (After Macro):
Bank
Field 1
Field 2
Field 3
JPM
123
456
789
[Code] .......
View 5 Replies
View Related
