The formula should take the info from validation lists in R13 & S13, and match them up in F3:O3 (T1Q2) & C6:C15 (T2Q2) and return the data in the intersecting cell into R9 (Where the formula is kept). In this instance, it should find 1 at I3 and the 4 at C15 and return NN to box R9.
What is the correct function (vlookup, hlookup, index, match, etc.) to use to find the intersect cell.
For example, I need a formula that will find the corresponding intersect cell for 35.0 in the red header and 31.5 in the blue column, equals 37.3 (which would be L5 on the worksheet).
°F
30.0
30.5
31.0
31.5
32.0
32.5
33.0
33.5
34.0
34.5
35.0
[Code] ......
I have a sheet(A) that I input items into cells B19:B49. Sometimes cells are left blank because there's no data to input. In cells A19:A49 I use to input remarks regarding what was put into it's adjacent cell.(B19:B49)
On a seperate sheet(B) I've labeled colums with items that I input into the cells B19:B49 on sheet(A)
let's say I title a column "Toys" and a row "Aisle 1". Where these intersect I want to display the information from sheet(A)'s remarks section cells A19:A49.
Here is a sample of what I'm working with: ...
View 9 Replies View RelatedIn my table I want to create a user form where the individual would enter a number which would correspond for the Header Row.
and
The user would also enter a Number that would correspond for the first main column (Column B).
Based on the numbers entered, I want to find the next highest number.
For example if 61 is entered 66 would be chosen.
-Same would be for the numbers entered to find the column.
Based on the numbers entered I would like to find the intersecting cell.
Basic code I can embed in a user form?
how to extract data like filtering but with a formula.
A
B
C
D
E
1
Cat1
Cat2
Cat3
Cat4 (Cum of Cat3)
Return Cell
[code]....
I want to return data in Column E such that if Column A is Apple and Column B is Red, I want Column E to insert there "9", which is the last row matching this criteria (just once for Apples, Bananas etc.).
Notes: A Apples wont appear again in the coming rows.Reds can appear again in the coming rows.Column C is constant.Column d is the Cumulative.Normally what would you do manually is filter Apples and Reds and record the last value for Column D.
All the answers I can find for this address either the auto-calculation setting or formatting the cell as a number. I am using this same formula in a bunch of cells to calculate totals: =SUM(E12:E17). It works find all over the sheet, except in one box. There is no difference in formatting or data type or anything.
Not working: notworkingexcel.png
Working: workexcel.png
The numbers being summed from the cells above the one in question are referenced from another sheet if that is relevant.
I am wondering if there is a way to return a cell reference by having excel
look at a table with certain parameters. For instance...
If there were a table with repeated dates such as:
Feb 12 1500 1530
Feb 12 1745 1750
Feb 13 1215 1245
Feb 13 1610 1700
Feb 13 1850 1900
Feb 14 1050 1140
Is there a way to return the cell number (ie A6) for the first instance of
Feb 14?
I would like to have the answer to a formula, say in cell G6, to show up in say G5. I notice in my college coarses, doing our homework through excel, the solutions are always in a cell around the entry cell.
View 9 Replies View RelatedIf it can not locate the correct responce I want it the formula cell to be blank. How do I adjust my formula to do this?
This is the forumal I am currently using
=VLOOKUP(A26,Subs!A:F,5,0)
I have also tried this one as well
=IF(ISNA(VLOOKUP(A6,Subs!A:E,5,0))+(VLOOKUP(A6,Subs!A:E,5,0)=""),"",VLOOKUP(A6,Subs!A:E,5,0))
I am trying to trigger a formula if a cell (B2) is populated (with anything) but if it is blank for the destination cell to remain blank.
The formula I am trying to trigger is =IF(G18=0,100,100-(100/(1+H18))).
I am trying to find a formula for a vlookup that will check one cell for any value but if that cell has no entry then it will check a different cell to return the value how do i do this?
TEAMCSS Wetherill ParkCT NAME
above is where i need it to look CSS wetherill Park is cell C1 the cell that has no entry is H1, both of these cells have validation lists in them,
OS windows XP excel 2007
I have a list of airport codes and I need to look up these 2 digit codes and find the relevant airport and country.
For some reason when I use the lookup function it is finding the correct lookup value but returning the column cell in the previous row.
Formula will go in cell H3 of Sheet 1.
I need to lookup cell H2 in column C on Sheet 2 and cell A3 in row 1 on sheet 2 and return the value at that intersection.
Is this doable?
My code below works. My question is when to use code below?
Code:
If Not Intersect(Target, Range("StartDate")) Is Nothing Then Exit Sub
My original code that works. If I use code above then I get into continous loop.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
'Ranges Do Not Intersect! then Exit vba
If Intersect(Target, Range("StartDate")) Is Nothing Then Exit Sub
[Code].....
I have a spreadsheet named: PartNumVsJobNum
The rows, from row 3 down in column A contain part numbers.
The Columns, in row1, from B to (last column with data) contains job numbers.
On another sheet, named: Non_Completed. I have the part numbers in column A (as in the PartNumVsJobNum worksheet). In column E down are
Job Numbers (IE: 4PZ). In column G are quantity values.
So for instance if Cell (A3) = 360010 (first part number listed)
and Cell (B1) = 4PZ I need a macro the will find the rows with 360010
in Column A on sheets( Non_Completed) and try to find the job number (4PZ)
in (columnE) for one of the rows. If the job number is found, then the value
in G of the (Non_Completed) sheets should be copied to the corresponding XY
cell in the PartNumVsJobNum spreadsheet.
I will need to do this for each job number on PartNumVsJobNum Sheet.
I'm attaching a sample worksheet below.
I am trying to do some data validation on certain cells in an OWCSpreadsheet object embedded in a userform. To check if the activecell is in the range to be validated, if tried to use
With ssSubjects.activesheet
If Not intersect(ssSubjects.activecell, .Range("$C$2, $D$2:$D$151")) Then
msg "error message..."
endif
in the SheetChange event handler for ssSubjects. It gives Runtime Error 5: Invalid Procedure Call or argument. So I tried to do it with a range with a single area, i.e.
With ssSubjects.activesheet
If Not intersect(ssSubjects.activecell, .Range("$D$2:$D$151")) Then
msg "error message..."
endif
but that gives a type mismatch. Is it possible to user intersect on a OWCSpreadsheet? How could I add data validation to a cell on a OWC spreadsheet? Is it possible? If not, what is the best way to handle data validation.
I have a list of items in a tab of a workbook that has attributes across the top, with an X in the intersection if the item has that attribute. For example:
Items:
Apple
Table
Paperclip
Attributes:
Red
Wood
Small
The Apple might have an "X" in the intersection of Red and Small, and the Table might only have an "X" in the intsersection with Wood.
I have another tab with five drop downs that can either be blank, or one of the attributes. I want to create a formula that will return the number of items in the list that have an "X" for all the attributes selected in the drop down. Therefore if I selected only "Small" and left the other four blank, the formula might return 2, and if I then select the next drop down and select "Red" the formula would now return 1.
Any thoughts of how I could accomplish this? I am thinking of using a SUMPRODUCT and some sort of Index Match to find the value in the cells selected by the drop down. It seems like Index only returns a row though, and not a column.
I would like to find the intersection points of all of the linesshown on the included chart. If that could be output into a table, by the day, that would be ultimately what I am after. http://bladeseri.50megs.com/Intersects.png. Guess 50megs.com doesn't allow this type of reference. Here is Geocities link http://www.geocities.com/bladex2007/Intersects.png
View 5 Replies View RelatedIt works I1 is blank and it works when F7:K7 has data and I1 is initialed. However, when I1 is initaled and there is no data in F7:K7 the cell reads "N/A". It should read "Approved with insufficient data".
=IF(ISBLANK($I$1),"",IF(ISBLANK(F7&G7&H7&I7&J7&K7),"Approved with insufficient data",LOOKUP(99999999999,F7:K7)))
I am trying to sum a column with values using a report downloaded from Celltracker, however the sum total is returning as zero.
When added using =a1+a2 the value returns correctly.
I need a formula for cell P5 that returns the date for the following Wednesday from a date in cell I3?
For example, if in cell I3 01/05/2014 (through to 06/05/2014) is entered, cell P5 should show 07/05/2014
If the Wednesday date is in cell I3, cell P5 should should that same date (e.g. 07/05/2014 in cell I3 and P5).
I am using this formula. How can I get it to pull 'Sales Materials'!$F17:$F69' and display along with 'Sales Materials'!$B$17:$B$69 when my logical statement is true.
=INDEX('Sales Materials'!$B$17:$F$69,SMALL(IF('Sales Materials'!$E$17:$E$69="YES",ROW('Sales Materials'!$B$17:$B$69)-16),ROW(A1)),1)
I've tried using * but I think something is going on with "-16" which I was told to you use to account for headers.
=AVERAGEIFS($D$106:$D$2825,$D$106:$D$2825,">"&$I117,$D$106:$D$2825,"<"&$J117)
Returns = 0
But on a copy of the same worksheet, the same formula returns the correct value. Is there something wrong with my formula cotext?
the formulas in sheet 2 of the attached file, the formula from rows 27 is returning nothing, and I think I’m not getting the formula right. It may need a little correction.
View 5 Replies View RelatedI am trying to average a data set where some rows at the moment are blank but will update at a later date, I am getting a div/0 error, the formula I am trying to use is
=IF(C23:C30="","",AVERAGE(C23:C30))
I thought this would look at the data and see if its blank leave it blank but if there are numbers there it would give me an average.
I have a Countifs formula that is returning a zero "0",
=COUNTIFS($B$4:$U$4,$A29,$B$10:$U$10,B$18), and it should return a 1.
The manual calculation is turned on and I have tried the F9 and no change in the value returned.
I have the following Vlookup formula:
=VLOOKUP(G3,'Calculation for September 07'!C7:E1975,2,FALSE)
The formula is returning #N/A, but I see the lookup value in the table array.
What do I need to add to the formula to have the lookup value recognized?
1) Not using a macro and combining relevant w/s functions, is there an intelligent way to return the value of:
SUM(n=n1 to n=n2) of (-1)^(n-1)*(n)^(n-2)/(n-1)!*X^n
to a cell containing the formula ??
2)Example:
n1 in cell A5:: 1 (integer variable)
n2 in cell A6:: 32 (integer variable)
X value in cell A7::1.00
Returned sum in cell A8:: 0.567143 ...
I have the following SUMPRODUCT FORMULA, Ive tested all the data in the columns. It's returning a #VALUE. Can someone explain?
=SUMPRODUCT((A1:A10="Ford")*(B1:B10="June")*(C1:C10))
I'm using Excel 2003, if that is a factor.