My code below works. My question is when to use code below?
Code:
If Not Intersect(Target, Range("StartDate")) Is Nothing Then Exit Sub
My original code that works. If I use code above then I get into continous loop.
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
'Ranges Do Not Intersect! then Exit vba
If Intersect(Target, Range("StartDate")) Is Nothing Then Exit Sub
[Code].....
Formula will go in cell H3 of Sheet 1.
I need to lookup cell H2 in column C on Sheet 2 and cell A3 in row 1 on sheet 2 and return the value at that intersection.
Is this doable?
What is the correct function (vlookup, hlookup, index, match, etc.) to use to find the intersect cell.
For example, I need a formula that will find the corresponding intersect cell for 35.0 in the red header and 31.5 in the blue column, equals 37.3 (which would be L5 on the worksheet).
°F
30.0
30.5
31.0
31.5
32.0
32.5
33.0
33.5
34.0
34.5
35.0
[Code] ......
I have a sheet(A) that I input items into cells B19:B49. Sometimes cells are left blank because there's no data to input. In cells A19:A49 I use to input remarks regarding what was put into it's adjacent cell.(B19:B49)
On a seperate sheet(B) I've labeled colums with items that I input into the cells B19:B49 on sheet(A)
let's say I title a column "Toys" and a row "Aisle 1". Where these intersect I want to display the information from sheet(A)'s remarks section cells A19:A49.
I have a spreadsheet named: PartNumVsJobNum
The rows, from row 3 down in column A contain part numbers.
The Columns, in row1, from B to (last column with data) contains job numbers.
On another sheet, named: Non_Completed. I have the part numbers in column A (as in the PartNumVsJobNum worksheet). In column E down are
Job Numbers (IE: 4PZ). In column G are quantity values.
So for instance if Cell (A3) = 360010 (first part number listed)
and Cell (B1) = 4PZ I need a macro the will find the rows with 360010
in Column A on sheets( Non_Completed) and try to find the job number (4PZ)
in (columnE) for one of the rows. If the job number is found, then the value
in G of the (Non_Completed) sheets should be copied to the corresponding XY
cell in the PartNumVsJobNum spreadsheet.
I will need to do this for each job number on PartNumVsJobNum Sheet.
I'm attaching a sample worksheet below.
Here is a sample of what I'm working with: ...
View 9 Replies View RelatedI am trying to do some data validation on certain cells in an OWCSpreadsheet object embedded in a userform. To check if the activecell is in the range to be validated, if tried to use
With ssSubjects.activesheet
If Not intersect(ssSubjects.activecell, .Range("$C$2, $D$2:$D$151")) Then
msg "error message..."
endif
in the SheetChange event handler for ssSubjects. It gives Runtime Error 5: Invalid Procedure Call or argument. So I tried to do it with a range with a single area, i.e.
With ssSubjects.activesheet
If Not intersect(ssSubjects.activecell, .Range("$D$2:$D$151")) Then
msg "error message..."
endif
but that gives a type mismatch. Is it possible to user intersect on a OWCSpreadsheet? How could I add data validation to a cell on a OWC spreadsheet? Is it possible? If not, what is the best way to handle data validation.
I have a list of items in a tab of a workbook that has attributes across the top, with an X in the intersection if the item has that attribute. For example:
Items:
Apple
Table
Paperclip
Attributes:
Red
Wood
Small
The Apple might have an "X" in the intersection of Red and Small, and the Table might only have an "X" in the intsersection with Wood.
I have another tab with five drop downs that can either be blank, or one of the attributes. I want to create a formula that will return the number of items in the list that have an "X" for all the attributes selected in the drop down. Therefore if I selected only "Small" and left the other four blank, the formula might return 2, and if I then select the next drop down and select "Red" the formula would now return 1.
Any thoughts of how I could accomplish this? I am thinking of using a SUMPRODUCT and some sort of Index Match to find the value in the cells selected by the drop down. It seems like Index only returns a row though, and not a column.
The formula should take the info from validation lists in R13 & S13, and match them up in F3:O3 (T1Q2) & C6:C15 (T2Q2) and return the data in the intersecting cell into R9 (Where the formula is kept). In this instance, it should find 1 at I3 and the 4 at C15 and return NN to box R9.
I would like to find the intersection points of all of the linesshown on the included chart. If that could be output into a table, by the day, that would be ultimately what I am after. http://bladeseri.50megs.com/Intersects.png. Guess 50megs.com doesn't allow this type of reference. Here is Geocities link http://www.geocities.com/bladex2007/Intersects.png
View 5 Replies View RelatedIn my table I want to create a user form where the individual would enter a number which would correspond for the Header Row.
and
The user would also enter a Number that would correspond for the first main column (Column B).
Based on the numbers entered, I want to find the next highest number.
For example if 61 is entered 66 would be chosen.
-Same would be for the numbers entered to find the column.
Based on the numbers entered I would like to find the intersecting cell.
Basic code I can embed in a user form?
# STUDENTS THAT GOT 100% IN EACH SUBJECT IN EACH SCHOOLKKVRockfortCampionENGLISH232013MATHS382518PHYSICS422515CHEMISTRY483020BIOLOGY503523
Consider the above table. Ca someone help me understand how to report the value of the # of students that got 100% (output) in a given school (input 1), and given subject (input 2).
In other words, if the inputs are the following:
Input Cell 1: Rockfort
Input Cell 2: Pysics
Then, Output Cell should report: 25
I know one option is to use the INDEX function, but with index function, I have to provide Row_Num & Col_Num as inputs. That doesn't fit my example above, as my inputs are specific values from the leading row and the leading column of the array in question.
I have created a macro in excel 2010 which enable the file to save (extract) data into separate location and name. The vba code for macro is as follows: Question: How can I save this workbook with reference to the value containing in cell B2? (it is named temporary now - as defined in the code)
Sub aaa()
'
' aaa Macro
'
[Code].....
I have data in the following format-----
Name : XYZ
City : ABC
Place : sdfg
Error :
price : [X]
cost : [ ]
time : [ ]
[code]....
I want only name, place,desc and under error, i want that type which is marked cross in the brackets(In the above example it is price ) .
name, place,desc,error should be pasted to separate columns in second excel sheet.
I have some daily text files in a folder (so about 30 of them each month), which in the end of month, I need to open them up in excel, format them so that I can use the information for my analysis.
I would like to create a macro, to quickly open them all up at once and save them each individually in .xls or .xlsm format.
I am new to VBA and after some research online, I was able to have the files open with the following code. but now I don't know how to proceed further to save them one by one with the same name but in .xls or .xlsm format.
Sub Opentxtfiles()
Dim MyFolder As String
Dim myfile As String
[Code].....
Recorded macro. The hope is to insert a excel formatted table a set number of times. I have found a loop code that references a Cell A1 and repeats that amount of times. So if A1= 10. There should be 10 tables inserted. However on the second time there is a fault with the table name. I need the name to change each time the loop is run. ie Table1, Table2, Table3 etc up until the loop stops (A1 contents).
I am using excel for windows 2010. The macro that i have so far is below.
Sub LoopTest()
Dim n
Dim V
Range("A1").Select
V = ActiveCell.Value
[Code] ........
******** type=text/javascript>*********>******** type=text/javascript src="http://pagead2.googlesyndication.com/pagead/show_ads.js">*********>
I tried locking an excel document and i ticked a box that said protect structure, and then entered my password and now I cannot open the document. It is a white square on my desktop now with no options to do anything, it cannot even be attached to an email or deleted. This was on excel 2008 on a macbook.
Using EXcel 2013, Windows 8
I have an Excel worksheet with one column being e-mail addresses. Other columns are Christian names, etc
Ideally can I create a full Mail merge with Outlook using whatever data I want. But probably just e-mail address and Christian name?
Otherwise be able to send one e-mail to all the e-mail addresses, without a major re-type.
I need to write a code to create visio flow diagram with excel inputs(Excel 2007). Attached is the requirement.
Requirement_Specification.docx
I have an Excel 2003 file that contains hyperlinks to OneNote notebooks on a Sharepoint site. An Excel macro looks for these links and determines the full hyperlink address which is then assigned to a variable. An Outlook message is generated which includes the hyperlinks.
The hyperlinks work in the Excel file. I can also copy them from OneNote and manually paste them into an Outlook message and they work. However, when I obtain their full address and transfer that to the email through code, the links do not work. The hyperlink address from OneNote starts with "onenote:http" which is not recognized as a link.
If I can do this manually, there must be a way to do this with vba. Are there characters I need to include in the OneNote hyperlink address to make this work? Is there another way to transfer the working link from Excel to Outlook?
I am trying to adjust the below macro so that it will work in Excel 2010.
Sub OpenAndProcess()
Dim fs As FileSearch
Dim I As Integer
[Code]....
Is there any macro that can be used to convert data which have been converted from PDF to Excel. Currently I'm using a traditional way by pressing F2 and enter to convert the data to excel format. It's tedious ( since the data range is quite big) and crammed my finger.
View 9 Replies View RelatedI have seen excel zipped but it is visible as excel only. when i double click it it open a folder where same excel document is placed i have to double click it again to open it. how can i save the excel as zip having its same format.
View 1 Replies View RelatedI have defined a name for a data range in an excel file. Now I want to use the same name in different excel file. I tried through various sources but not sure how to do that. Current Soln: I am copying the data from the source file and re-defining the names for the range. But this seems to be duplicate and creates unnecessary space.
View 3 Replies View RelatedI am using ADO to fetch required data from other sheet using sql query. But it is giving me only the headers as a result.
I just want to extract few columns.
This is the code i am using:
Sub example2()
' declare variables
Dim cn As ADODB.Connection
Dim rs As ADODB.Recordset
[Code]....
see attached excel sheet. On Colum G (highlighted in green) there are hours and minutes. Is there a way I can create a function or macro so that it will convert the values to minutes. For example if the value 1:48 it will convert it 108 minutes or 0:36 will be 36 minutes.
I know I can use =Hour() or =MINUTES() formula but this is long way. My sheet has over 10k data.
Attached file: Book1.xls
As you can see in the picture, the box which I am writing in won't get bigger. I want it to cover the whole workscreen, but so far nothing has worked.
View 3 Replies View RelatedI have 8 columns of data that needs to be alternating every third row by subject data, however there is no option under "paste special." I have been googling and I think I might need a "macro" but I am not sure. The values for each cell are unique and do not repeat.
The format should be like this:
1st row =subject A data
2nd row =subject B data
3rd row =subject C data
4th row =subject A data
ect..
For example how it would look in Excel:
A1 A2 A3 A4 A5 A6 A7 A8
B1 B2 B3 B4 B5 B6 B7 B8
C1 C2 C3 C4 C5 C6 C7 C8
a1 a2 a3 a4 a5 a6 a7 a8
ect.. where Letter# would be a numerical number (such as A1= 101, B2 =93, ect)
There are 45 rows for each subject pool, for a total of 135 rows (which should be alternating by subject data) and there are 8 columns.
I have a spreadsheet that contains all of our staff members (around 50 going down the "a" column) and the mandatory training that they must complete (10 subjects going across the top). They are a couple of things that I want to do with this sheet but how to do this.
1) I want the dates in which people's training expires to change colour to blue, those that is about to expire in a month to go green.
2) Copy the names and their training required onto another worksheet so I can keep a list of who I need to arrange training for. Rather than looking down each column and hand writing the names out.is it possible for the sheet to then email me people who's training has expired or is about too?
Example.
Fire safety First aid. Manual handling
John. 12/04/15. 23/08/15. 04/05/15
Frank. 14/05/15. 16/07/15. 08/08/15
Julie. 21/11/15. 11/02/15. 22/10/15
Sharon. 03/04/15. 07/06/15. 12/04/15
I need a front worksheet with either buttons or tick boxes that will list different options for a machine
Once a tick or push button is activated a hidden block of text related to that specific tick box needs to be selected and placed onto a final print out sheet (allocation)
when futher boxes have been ticked I would like all the information blocks to build up on the final print out sheet.
