I want to have C9 populated with a budget type from H1, I1 or J1. How do I create the formula that checks which budget type the value in F9 is?
I am using excel very infrequently.
Screen Shot 2014-05-18 at 12.52.26.jpg
I have a custom email creation template I am merging with another version. The problem I am having is wrapping my head around not only selecting a range that is offset from ActiveCell (column 6-9) but seeing if there is an "x" in that range which is normally blank. My previous attempts identify the "x" but adds the text every time it is found. (Each column is a flag for an email bullet and they can have all four bullets in the email where I only want the text included ONCE if they have ANY bullets included). I use the range because I do not want the text included if none of the bullets are used.
Teh StandHTML then gets used in the body of the email like other HTML items I use
The email is generated using the ActiveCell.Offset to insert special text, emails and routing and has weathered alot of changes over time.
Dim Myrange As Range
Myrange = Range(ActiveCell.Offset(0, 6), ActiveCell.Offset(0, 9)).Select
If Myrange = "x" Then
StandHTML = StandHTML & "Important Text"
End If
I need to have a single cell tell me (either by returning a certain word or colour) if any cell within a range of cells (a)(all within the same column) contain the same text as another cell thats located somewhere within a different range of cells (b)(again within thesame column).
View 2 Replies View RelatedAll it does is step the cursor down 1 cell from where it starts on the worksheet, rather than sorting through the defined range and then selecting the cell I want. I'm not sure why as I've used almost exactly the same code successfully on a different worksheet in the same workbook:
Dim mycheckrng as Range
myupdatedate = "04/06/2008"
Set mycheckrng = Range("D5:AR5")
For Each c In mycheckrng
If c.Value = myupdatedate Then
c.Select
End If
Next c
mycsdcdateref = ActiveCell
ActiveCell.Offset(1, 0).Select
I am trying to check and see if column "A" has a certain number if it does not then keep going and if it does then find wich row in column "A" has that number then in the same row increase column "B" value by 1.
Dim rngPartNumber As Range
Dim Rws As Long
Dim R As Long
Set rngPartNumber = ActiveSheet.Range(Cells(2, 1), Cells(Rows.Count, 1).End(xlUp))
Rws = rngPartNumber.Rows.Count + 1
For R = Rws To 2 Step -1
If Application.WorksheetFunction.CountA(Rows(R)) = compName Then Quantity = Quantity + 1
Next
In our program it is essential that only data is entered for the current week.
I need code that if a date is entered into "cell C1",that it will evaluate this value and compare and assure that it is between the dates in Range D1:E1 (upper and lower values)
If it is between these two dates, nothing happens and you can proceed to enter data.
If it is not message -Invalid date entered. Proceed? If "Yes" nothing happens and you can proceed to enter data! If "No", then the value in cell C1 is set to nothing and allows you to enter the correct date.
I need to be allowed to enter an incorrect date at times,to review and check previous entries, 99% of the time it must be between the start and stop date.
I have an Excel sheet set up with 6 columns: Col A contains a user-entered date.
Cols B-E each contain a drop-down that the user can set to 1 of 4 options.
Col F (I want) to show a date based on Col A & the results of the drop-downs.
The drop-downs contain (in order of importance): "Immediate","Urgent","Routine" and "None". If any of them are set to "Immediate", the date in Col F should be Col A date+2 days, if any set to "Urgent" it should be Col A+14 days, any set to "Routine" it should be Col A+28 days and for None the field can remain empty. I can enter a formula in F2 that checks for B2's drop-down as follows:
I have a list of dates in a column, and am wanting to compare them against today() in cell A1. If any of the dates are in the past, it returns a FALSE, if all of the dates are in the future, it returns a TRUE.
View 7 Replies View Relatedi need to check a date within a multiple range of dates using certain key.
i've tried vlookup, but failed to get correct answer.
here is Table1
product (cell=A1)
date (cell=B1)
plan(cell=C1)
A
20080801
A
20090801
A
20090901
A
20090831
A
20090101
A
20091101.....................
I am trying to build a user form to find out the customers who purchase more than $1,000 during a certain period. The userform has two inputs:
One is to select the data range of customer information. Assume all customer information are in the cell A2: H10, how shall I write the error checking code if the user selects the range which is out of (A2:H10)? message box would be " You selection include invalid data, please check"..
The other input is called " Get data past this data", and I can enter a date in the following cell ( txtDate). Regarding the error checking, I am thinking to use IsDate() function to make sure it is a valid date. Will be there be any other error checking you will recommend?
I have a standard table with quite a few rows. Columns I have are :
Text | Lower number | Higher number
What I would like to do is, in another worksheet, enter a number and I'd like to go through the table and if the entered number is in the range of the Lower and Higher number columns, have the Text displayed.
Using Index Match I can do this if the number matches Lower or Higher number but not if it's between them.
Basically I'm doing a excel spreadsheet where i have a range of cells where we can input some figures or amount. If the cells they indicated exceed a certain amt example: 800, i would want it to show an error msg. I know it maybe sound simple, but have been using the if and countif formula which keep on showing error to me.
View 3 Replies View RelatedIs there a way of checking for duplicates in a range of cells using one cell only for the code? Return does not have to include what value is a duplicate - only true or false. This opposed to using multiple cell and COUNTIF or a pivot table.
View 5 Replies View RelatedError Check Marco.xlsm
see attached example. I am trying to write an error detection routine that iterates through worksheets that have numeric values for names (ignore text names or alphanumeric). Macro checks range on each numeric worksheet E3:E33 and is supposed to report back on the SummarySheet if any value other than 1 or 0 is found in range E3:E33 on any numeric-name worksheet. Code as follows:
[Code] ....
Problem is that it just reports EVERY worksheet as having an error when clearly most don't (none do I think in the attached example).
Try changing some of ranges E3:E33 to values other than 1 or 0, it still reports all sheets. Why the macro does not evaluate the range E3:E33 properly and just reports every worksheet as having an error?
I am new to VBA programming in Excel (currently 2003) so hopefully this isn't a "dumb" question.
I would like to re-arrange a group of data from a table of several rows and columns to a single column where the data from the first row is translated to a column then the second row is appended to the end of that data ....
ie:
( 1 ) ( 4 ) ( 7 )
( 2 ) ( 5 ) ( 8 )
( 3 ) ( 6 ) ( 9 )
to
( 1 )
( 4 )
( 7 )
( 2 )
( 5 )
( 8 )
( 3 )....
I thought a user defined formula would be a good place to start but am having problems getting the address of the cell that the function resides in to use to calculate the offset from a fixed cell (to be entered into the function as a argument). In other words, how do I get the address of the call that a UDF is entered in into the UDF? activecell.address is returning the cell that was last clicked not the cell were the UDF resides.
Secondly is there a better way to achive the results that I am looking for other than through a function? The size of the table will vary from worksheet to worksheet. I would also like to add an argumnet that lets me exclude cells with certain content from the resultant list.
I have created a drop down menu wseveral items for the first time. The drop down is located on several worksheets. What I'm trying to do is find out if there is a way to do 2 things.
A) capture a total (numerical value) of the number of items selected from the list on each worksheet. ex. if on worksheet #3 15 cells contain data from the drop down cell A1 on worksheet #1 would = 15.
&
B) capture a total (numerical value) of the number of times a specific item was selected from several worksheets. ex. if ABC was selected from the drop down menu 8 times on worksheet #2 & 6 times on worksheet #3, cell A2 on worksheet #1 would = 14.
is there a VBA way to determine an unknown path in which a KNOWN WB is located !?
Assume a WB named: 1X1.xls Located at C:TEMP
[In case the user uses more than one partition and/or more than one HD - it might alse be located at: D:TEMP
The known open command for a known file AND Path is:
How to pull data with a VLOOKUP to a file located on a Server.
My big problem is not understanding the syntax of the Server location. I've provided it below (obviously with some character changes).
I have a file located on my Hard Drive. I need to perform a VLOOKUP from A2 on this spreadsheet. The File on the Server is called "LookupTest.xls". The Range of Data is from Sheet 1 and is from A2:C4 and I need to pull the data from column C depending on what is selected from A2 from the file on my HD. I understand how to use VLOOKUP, just not when I'm pointing to another file on a Server.
Server mapping from Windows Explorer:
rbbabc$ on 'RP17409 - ABC Database (AHSSRVVN678.tge.com)'
Again, that server mapping is fake, as I changed it, but this is how it looks on Windows Explorer.
I'm trying to keep a master file of Data on a spreadsheet found on a server so that one master file can be updated, and several other tools pull from that Master File on VLOOKUP, Validation Lists, etc.
I have 2 tables where I need to pull data from one table into the other.
Table 1 - pull data here
A
Site
B
Begin Date
C
End Date
Rate
[Code]...
For example: site 77 in table 1, I need to pull whatever rate is shown for site 77 in table 2 for the date range specified on table 1. So the correct answer for the first row site 77 in column E would be .02. Notice there is a problem...mainly the dates do not match exactly. I just need the rate the applies for the majority of the time.
Another example. For table 1, site 174 from 2/11/11 to 2/22/12, the correct answer in column E (pulled from table 2) would be .02, even though Column D shows .00.
I have a macro that copies data from 1 sheet to another one.
However, in the destination sheet I have no way of know which is the 1st empty row that my data can be paste into.
I have a sheet where I need to located set-up dates that are greater than 6 months. I dont know if this matters but the cells are not in consecutive rows but are all in column F. I have tried the serveral ways and nothing is working.
View 9 Replies View RelatedI have a table of data, every entry in the table is different. I need a way in a single cell to determine what column the data is in (and a way to get the row it's in would be nice too), some way to do VLOOKUP and HLOOKUP in reverse.
In the attached example I need a function that can take dog and return "1", "A" or even the header "Animal", if another similar function can return the row, that would be nice also but if I can get the column I can get the row. Example
I've tried a few things with creating an array formula to do matches across multiple columns and I can make a multi-cell array that will flag the right column with the right column number, but any attempt to sum/max/match this array formula returns 0 or #N/A
I want to be able to link spinbuttons to the cell it is located in automatically, so I can move it around or copy and then paste into other cells. I do not want to use one button to increment a selected cell.
View 1 Replies View RelatedHow do I select the empty cell (once located after using the below loop) so I can paste into it?
[Code] .......
I currently have a button on a worksheet that loads a userform. I have code written that's not in a in a separate module but in the user form itself. It uses the information entered on the user form screen. When I try to reference data that's on a sheet other than the one that the button is located on, I get a "select method of range class failed" error. I assume that this problem has to do with the button macro being located on a different sheet than the data. Is there an easy fix?
View 4 Replies View RelatedWhat is the formula to be used to extract number from a alphanumeric string located at different row?
example:
test123test128test131
test124test129test132
test125test130test133
test126test131test134
test127test132test135
test128test133test136
result: ....
I need code to print a file located in my C drive.
View 6 Replies View RelatedI am looking to automate our daily sales report.
I am aware of the windows task scheduler.
However, I'd like for this report to run and be sent out very early in the morning (5AM) before I'm even at work.
My computer is usually off because it's with me as I'm commuting into the office.
These files are saved out on our network drive.
Is there a way I can "open" the file and run the macro I have that builds my sales reports with my computer being off?
Is there way to take the values of a listbox selection located on a Worksheet and call that value when I initialize a Userform?
Or, if not, is there a way to declare my listbox selection as a public variable that can be accessed from any module of my VBA project?
I am trying to use the same VBA code for different applications using variables.
Basically I want to have a variables sheet that has the different directories based on the macro selection. My variable sourceloc would change based on the variable name on the sheet.
sometimes I would want it to equal what was in a1 and sometime I would want what was in a2
a1 cell contains "f:filezilla files
a2 cell contains "f:dmc files
This is the code I started and it gives compile error when ChDir = sourceloc is reached
Public sourceloc
Sub filezillasettings()
Dim sourceloc As String
sourceloc = ActiveSheet.[a1] ' a1 cell contains the directory name and folder name =
End Sub