I want to be able to link spinbuttons to the cell it is located in automatically, so I can move it around or copy and then paste into other cells. I do not want to use one button to increment a selected cell.
View 1 RepliesFor example, if my graph currently shows B1:L1 range, how by clicking a spin button to make the graph show B2:L2 range?
...
i'm trying to automatically create hyperlinks in some cells from mail addresses located in another column. this is what came out:
View 2 Replies View RelatedA1, B1, C1, D1, E1, I1, J1 & D3 all linked to L1 thru S1 perspectively But when I copy the highted box and paste it, A4 automatically link to L4, as well as other fields. create a macro where excel automatically generate the link A1 = L1, A4 = L2, A7 = L3 and other fields perspectively all the way til the end?
View 3 Replies View RelatedIf I have order #'s in one column is it possible to have all those linked to their individual files automatically?
For example:
Order #
A-123
B-124
C-125
I want all existing and manually entered order numbers to be linked as so
[URL] ..........
For non-blank cells in the range C11:C65536, I want to have a hyperlink automatically generated (in the same cell), using the cell value as a relative variable in the link itself. One intended use for this is to populate the range with stock symbols, and have it generate hyperlinks to the following address:
http://news.moneycentral.msn.com/tic...asp?Symbol=XXX
Where XXX is the stock symbol in the given cell.
I have a spinbutton on a userform. Here is the section of code for SpinUp:
[Code]....
Normally, I wouldn't hard code an address in like this, but I was given a last minute project to present on Monday, so it's down,dirty, and quick. Anyways, the adjacent cell "O7" has a formula referencing another page. When I spin the spinner it activates the correct cell (and continues to do so as long as I press the button), but here's the wierdness: cell "07" formula disappears, leaving the existing value in it. It's like it copy pastespecial values.
I've stepped through the code and it's not referencing any other procedure. It happens on this line:
[Code] ....
I have a macro that copies data from 1 sheet to another one.
However, in the destination sheet I have no way of know which is the 1st empty row that my data can be paste into.
How do I select the empty cell (once located after using the below loop) so I can paste into it?
[Code] .......
I am trying to use the same VBA code for different applications using variables.
Basically I want to have a variables sheet that has the different directories based on the macro selection. My variable sourceloc would change based on the variable name on the sheet.
sometimes I would want it to equal what was in a1 and sometime I would want what was in a2
a1 cell contains "f:filezilla files
a2 cell contains "f:dmc files
This is the code I started and it gives compile error when ChDir = sourceloc is reached
Public sourceloc
Sub filezillasettings()
Dim sourceloc As String
sourceloc = ActiveSheet.[a1] ' a1 cell contains the directory name and folder name =
End Sub
I'm trying to calculate whether a time value located in a cell is between the times in two other cells. Here is what I tried:
=IF((AND($A62>=C$55,$A62
Basically, at month end, my company will create a new folder with the name as YYYY_MM (e.g. 2012_11). In this folder, a new file will be created as: earnings_YYYY_MM (e.g. earnings_2012_11).
What I want is to automatically update the link to the most recent file: earnings_YYYY_MM, whenever it is available. For example, next month there will be a new file earnings_2012_12 created in the new folder 2012_12, then the new file will be linked with.
I have 2 WorkBook, Division.xls and Department.xls. The Sheet1 in the Department is linked & getting the values from Sheet1 in the Division & works fine. But if there is a change in Division workbook, its not affecting here immediately. When i close the Department.xls and open again, i can find the latest values. I thought the links to the other sheets or workbooks will be updated when i press the save button. So I used the SendKeys "^S" in the VBA. But it fails. Is there any way to mention through VBA code to update the recent values to the Department workbook from Division.
View 7 Replies View RelatedI have two worksheets, one with detail monthly information and one with YTD information. So let's say the three numbers I want to capture in the YTD sheet are in columns B, G and I on the monthly sheet. January's data might be in B5, G5 and I5. February's data is in B12, G12 and I12 and so on.
On the YTD sheet in cell C2 I link to Monthly!B5 and in C3 I link to Monthly!B12 so cells C2 to C13 on the YTD sheet show the monthly totals from column B on the detail sheet. On the YTD sheet, cells C20 to C31 show the monthly totals from column G on the monthly sheet, so cells G5, G12, etc. And finally, cells C40 to C51 on the YTD sheet show monthly totals form column I on the monthly sheet.
In the past I've always created all these links manually. After creating the links in C2 to C13 on the YTD sheet, is there a way to use a formula in C21 that uses the link in C2 to create a link for G5?
I am very new to using excel and I need connecting the information between two sheets. I have a weekly schedule that I want to use for my employees. I want that information to automatically be moved to a daily schedule. I need to be able to see how many openers closers and mid-shifts I have and how many hours I am consuming from my budget. I want the shifts from the schedule to be moved to the daily schedules in order in chronological order (morning shifts first, then mid-day/closers). If at all possible how I would like to have the span of their shift to be highlighted in the cells on the daily schedule.I will attach what I have so far to provide as much info as possible.
example.xlsx
I have a excel workbook with One Master Sheet.
The data entered in the master sheet is automatically updated in the sub worksheets through direct links created . Each sub worksheet is a branch of organization. almost 100 branches are there.
The data is entered for all the branches in the Master Sheet at different periods continuously which is to be kept as such.
For example In first day 10th, 15th branch data may be entered in master sheet first and second row, which is getting automatically updated in the respective branch worksheets. But the problem is when the data is entered for any branch( for example 6th branch) in 5th row of Master sheet, in the respective 6th branch sheet also, it is updated only in 5th row only, leaving the first four rows blank. But i want the updation in the branch sheet continuously without any blank rows.
For updation i have used the simple direct link between the cells of Master worksheet and Branch sheets.
How to get the updation in branch worksheets while entering the data in Master sheet without any blank rows.
When I protect the worksheet with the spinbutton, the spinbutton is no longer accessible. How can I modify the code below (provided by Leith Ross) to make the spinbutton accessible in a protected sheet?
View 3 Replies View RelatedThe script it's almost all complete and it'already working. How works this script:
From the Combobox_click i load a txt file, the script from the txt file get only the first column of the file. Its a list of numbers.
When this list of code numbers it's loaded in the Combobox_click, for each code number in the image combo box there is a one corrisponding image. For the images folder in the cell J2 the is a one Path reader. the scrip work perfectly.
What i need:
As you can see, under the image combo box, there is a SpinButton.
I need that by clicking the Forward or Back button i can go forward or back of the images list.
I use spinbuttons to increment 3 data cells (C7:C9). These cells are used as entry data for some calculations and also trigger some macros via change event. Every time I use them the workbook crashes, this is only since I modified one of the instantiated macros that sorts a table on another sheet. See below the spinbutton code with the call of the macro and further the code of the sorting macro:
Private Sub SpinButton1_SpinDown()
Range("C7").Value = Range("C7").Value - 0.05
End Sub
Private Sub SpinButton1_SpinUp()
Range("C7").Value = Range("C7").Value + 0.05
End Sub
Private Sub SpinButton2_SpinDown()
Range("C8").Value = Range("C8").Value - 0.05
End Sub......................................................
I’m using this code to change the value of an active cell with a spinner named: 1.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
Dim lNum As Long
If IsNumeric(Target) Then
lNum = Target
If lNum = Target And Target >= 0 Then
With Me.Shapes("1").ControlFormat
.LinkedCell = vbNullString
.Value = Target
.LinkedCell = Target.Address
End With
Else
Me.Shapes("1").ControlFormat.LinkedCell = vbNullString
End If
End If
End Sub
The problem is, that whenever I click or activate a cell its value automatically changes to 0. The spinner works just fine modifying the value of the activated cell. The problem is that this code somehow causes all the decimals such as 0,3 0,1 or 0,8, entered manually, to change to 0. This way only integral numbers, such as 1, 45 or 100 are accepted. I must truly say I have no [no need to swear - mod] idea how to fix these problems meaning the automatically inserted 0 and the fact that the sheet doesn’t accept decimals changing them to an integral number.
Textbox and SpinButtons, there is code for changing the date in a textbox by using a spinbutton. I have tried to use some variation of that for the purpose of changing time but to no avail. What my intention is, is that if someone enters 12:00 into TextBox that SpinButton_Up or SpinButton_Down can change the time to 12:01... or 11:59... respectively, and so on.
[URL]
I don't know if title is understandable, English not being my tongue, anyway here's my problem, the current value must be increased or decreased by 0.01 if it's between 1 and 2, by 0.02 between 2 and 3 and so on. I'm really new to VBA and after a few hours I came up with the following code which works fine till the value of 6 and then gets stuck: ....
View 14 Replies View RelatedI'm developing a local timesheet userform application and want to capture times which may be greater than 24hrs using a textbox/spinbutton pairing.
I've managed to pair up and work with times up to 24hrs but the output always resets after 23:55.
I've also tried formatting the output as "[h]:mm" but without success.
Private Sub sbDTime_SpinUp()
With ctrl2
If .Text = vbNullString Then
.Text = Format(TimeSerial(0, 5, 0), "hh:mm")
Else
.Text = Format(TimeValue(.Text) + 5, "hh:mm")
End If
End With
End Sub
Private Sub sbDTime_SpinDown()
With ctrl2
If .Text = vbNullString Then
.Text = Format(TimeSerial(0, 5, 0), "hh:mm")
Else
.Text = Format(TimeValue(.Text) + 5, "hh:mm")
End If
End With
End Sub
I'm trying to create a userform to act as a walk-through for a process. I've settled on using a multipage to conserve the required screen real-estate, and break the process into natural 'stages'. I've happily got these stages fixed into the userform's pages, with a couple of command buttons running events OnClick - but cannot figure how to get the spinbutton to navigate between the pages.
View 5 Replies View RelatedI have an Active X SpinButton control directly on a spreadsheet that changes the input cell. (The idea is that later on, there'll be a bunch of these input cells, accompanied by their respective SpinButton controls).
I'm allowing the user to define the Min, Max, and Step (SmallChange) value of the SpinButton because (1) I need it to do decimal points and negative numbers and (2) that's what my boss would have wanted.
So I set the Min, Max, SmallChange value in the SpinButton properties to "0" then try to manipulate them in the VBA code.
What went wrong with the code is hard to explain. But basically, when I use the SpinButton to increment or decrement, it didn't quite do it correctly. If I fix the increment part of code, then the decrement part of the code goes wrong and vice versa.
An example: I have Min as "0.5%" in cell B7; Max as "4.5%" in cell B8; and Step (SmallChange) as "0.5%" in cell B9. The Input cell is in cell B10 where user can either type in a value within the defined range (enforced by data validation) or use the SpinButton to change the value.
To replicate the problem: I type in "1.0" in the Input cell and click on the left SpinButton and it would not allow me to go to the defined lower limit (which is 0.5%) in this case.
Here are my codes:
Private Sub SpinButton1_SpinUp()
Dim MyMax As Variant
Dim MyStep As Variant
Dim MyInput As Variant
MyMax = SpinButton1.Max + Range("B8").Value
MyStep = SpinButton1.SmallChange + Range("B9").Value
MyInput = Range("B10").Value...................................
I have a userform with a listbox set to a range of numbers from 1-10, I would like my userform to expand/collapse dependant on the number within the listbox. The problem I am having is the forms height does not adjust from using the toggle controls only when you select back into the listbox itself.
Private Sub ListBox1_Change()
If Me.ListBox1.Value = 1 Then
Me.Height = 180
End If
If Me.ListBox1.Value = 2 Then
Me.Height = 210
End If
If Me.ListBox1.Value = 3 Then
Me.Height = 240
End If
End Sub
I have tried using click/after change events however I get the same response. Am I missing something from my code or should I be using another control (SpinButton for instance).
I am working on Excel 2010. I want to find a way to link data from one spreadsheet to another one and whenever I update the first spreadsheet, the second one will be automatically updated?
View 2 Replies View RelatedI’m working on quite huge spreadsheets. The same formula will be used on more than 30 sheets.
So far if I have to change the formula in one cell I have to go to each sheet and change it manually (which is quite boring and time consuming).
I’m wondering if it’s possible to reference all the formulas on the sheet to one sheet (which some kind of a master sheet with all the formulas).
I can copy the formula with the “Past Special” function but the function is not updating if I change the formula on the main sheet.
So is it possible to link it and that it’ll be updated automatically when I’m changing the formula on the main sheet?
I want to have C9 populated with a budget type from H1, I1 or J1. How do I create the formula that checks which budget type the value in F9 is?
I am using excel very infrequently.
Screen Shot 2014-05-18 at 12.52.26.jpg
I am new to VBA programming in Excel (currently 2003) so hopefully this isn't a "dumb" question.
I would like to re-arrange a group of data from a table of several rows and columns to a single column where the data from the first row is translated to a column then the second row is appended to the end of that data ....
ie:
( 1 ) ( 4 ) ( 7 )
( 2 ) ( 5 ) ( 8 )
( 3 ) ( 6 ) ( 9 )
to
( 1 )
( 4 )
( 7 )
( 2 )
( 5 )
( 8 )
( 3 )....
I thought a user defined formula would be a good place to start but am having problems getting the address of the cell that the function resides in to use to calculate the offset from a fixed cell (to be entered into the function as a argument). In other words, how do I get the address of the call that a UDF is entered in into the UDF? activecell.address is returning the cell that was last clicked not the cell were the UDF resides.
Secondly is there a better way to achive the results that I am looking for other than through a function? The size of the table will vary from worksheet to worksheet. I would also like to add an argumnet that lets me exclude cells with certain content from the resultant list.