Count Hours Between 2 Times Based On Hours In Another Cell
Jun 11, 2008
A1 is 10 (10 hrs worked) , A2 is 10:30am (in time), A3 is 9:00pm (out time), A4 needs to be the total hours and minutes between A2 and A3 based on the hours listed in A-1. What i need is a formula that will calculate the hours and minutes between the 2 times based on hours entered in A1 but that will also compensate for a manadatory 30 minute lunch that needs to be deducted from the total hours if hrs listed in A1 are more than 6.
example: worked 10HRS, 10:30am to 9:00pm, Total hrs is 10hrs 30min, which should be just 10 since the lunch is a none work time and must be subtracted.
If a person worked more than 6hrs, they must take a lunch. if they worked less, than 6 then they don't have to. I need a calcuation to recognize the greater than, less than factor into the equasion also.
The below formulae allows me to see the difference between two dates and only returns the difference in working hours ie : Difference between 02/02/2010 08:00 & 03/02/2010 08:00 is 16 Hours 0 Minutes
=(INT(A3)-INT(C6))+MAX(MOD(A3,1)-MAX(MOD(C6,1)))
The following displays it in the Hrs and Mins format
I am working on a spreadsheet where I want to count the number of calls to our service desk between specific hours (ie. 6:00 a.m. - 7:00 a.m.) up through 8:00 p.m. I have looked at all the forums and tried all the formulas that seemed to be what I was looking for and it isn't working! I am adding the information to a summary spreadsheet from which I am gathering the information from other sheets in the workbook. This will be an ongoing spreadsheet done weekly for every month.
Examples: I need to know how many calls from these times on a summary sheet.
It's been several years sine I had to look at calculating amount of time worked. Can you please look at this old spreadsheet of mine and verify that the formula is correct?
It appears to be ok to me, but I don't want any errors when it comes to paying my employees
As you can see on the example i have TEST hours.xlsx, I have a file that calculate the money every doctor should take based on the working hours.
Nights, holidays and holiday night have different price/hour.
The excel is working fine…but now I have to make a formula that separates automatically based on the beginning time and the end time of the doctor’s shift the day hours tha night hours, the holiday hours and the holiday nights hours. In the excel I have fill the hours Manuscript, I need a formula to do that for me…
On the yellow cell I have try to find out the formula for the holiday hours but because the day is calculated due to a formula it is not working!!!
Simple Example: A doctor Is working from 21:00- 8:00 (next morning Sunday) he should have 1 simple hour (21:00-22:00) 9 night hours (22:00-6:00) and 2 holiday hours (6:00-8:00,)
In column A I have a date AND time entered. By the way, this is not via cell format, I have manually entered, say today's date and the current time. In column B I have a future date and time.
Basically, column A is the date and time a problem was given to me. Column B would be the date and time I resolved the problem. Now for the formula....Column C needs to spit out whether the problem was solved between 24 and 48 hours OR less than 24 hours OR greater than 48 hours.
This is for employee time sheet and schedule. I have multiple employees work a specific shift on various days. I need the calculate the hours worked each day and then have them totaled at the end of the period. Here is and example:
Employee Monday Tuesday Wednesday Thursday Friday Saturday Sunday Total Hours Total Cost John Smith 10-5 12-6 9-2 5-10:30 3-8:30
How do I get it to calculate the difference in the same cell, convert it to hours, add up all the results and place it in the totals columns then calculate those totals by their pay rate to get my Labor cost?
I receive data from a company I deal with that has the date and time of all of my transactions with them listed in an excel worksheet. Only problem is that the date/time that I receive is not in my timezone, which is a bit of a problem for me!
What I want to do is to be able to adjust the date and time shown in the cell forward by 14 hours, so that the data is shown in the timezone that I am currently in. So the end result for the first line of data in the attached file would end up being 2006-08-11,10:28:51 instead of 2006-08-10,20:28:51.
Lunch is not paid. Holiday and vacation hours get calculated at the regular pay rate. Overtime is anything in excess of 8 hours per day and/or in excess of 40 hours per week and/or over 5 working days per week. Saturdays for most the employees will be overtime because it will be their 6th workday of the week; but it will be regular time for one employee as it will only be his 5th workday of the week.
For accounting and payroll purposes, we need the totals to display in both hour and decimal format.
So far, I have Lunch, Regular and Overtime hours figured out, but I still need to work with Saturday, Vacation and Holiday hours. Also, currently, the time in and out has to be typed in with the colon and AM or PM. Is there another way to input the info without having to type in those items? I'm trying to make it as user friendly as possible.
I'm attempting to make a simple time sheet for a handful of employees. I'd like to enter the clock in time and clock out time for each day. The end cell should be the running total for the week. The tricky part for me is having the formula subtract an hour for each day that is over 5 hours.
Basicly we pay single rate between 8.00am and 8.00pm at all other times and on bank holidays and weekdays we pay an enhanced rate. If I can calculate the standard hours then the remainder of the hours are enhanced. Aim to count how many work hours fall between a standard start time (SHS) and a standard end time (SHE) (currently 8.00am and 8.00pm), that do not fall on a weekend and are not a bank holiday.
Column B = Start time (eg 06:00) Column C - End time (eg 22:00)
Column D= date (from which day of week is derived) Column E = Y or N for whether it is a bank holiday or not..............
I can’t figure out why this formula is not working. I am trying to alter it a little, but I still think it should work. Here is what I am trying to do. I am looking to calculate the time difference between two work projects, but exclude time when the office is closed. So someone starts a project at 2pm and finish 10am the next day it will show a result of 4 hours because the office closes at 5.
Here is the formula. It is the time formula from cpearson.com ...
I have problem to calculate the time which is more than 23:00:00hrs in a file. I need to compare the benchmark time and the difference of time(start time and end time) and show pass/fail depending on benchmark set time. For few of the times which is more than 23:00:00 hrs the format is taking different(example: for 49:15:48, it is showing 02/01/1900 01:15:48 in formaula bar) for which i am not able to use formula and know pass/fail.
i need to get a formula that will calucate hours and min. its for how many hours the employee has not worked. some of them would be strait hours some would be just min there is no way to tell.
example lates 2 hours anp(absent no pay) 12 hours sicks 55.5 hours no calls early outs 21 min (this is just an example if it were real this person would be fired)
i know this adds up to 69.85 hours but i can't fuiger out a way to get it to calucate in excel. i know i could have it all changed to min and then devied by 60 to get the hours but how do i get it to read what is mins and whats hours?
I'm trying to do a simple calculation of the # of hours between 2 times, rounded up to the nearest hours. Somehow along the way I've ended up with this massive formula below, which is doing what it's supposed to do except for certain cases (like the one in the attached file...where it says the difference between 2am and 3am is 2 hours) =ROUNDUP(IF(B2="",0,IF(A2="",0,(IF(B2<A2,((((B2+1)-A2)*1440)/60),(((B2-A2)*1440)/60))))),0)
in speeding up the below code as it does not seem to matter whether I use For, If loop etc - it runs too slowly. Basically we have one sheet which is input in a different timezone that needs converting to GMT... since daylight saving I wrote some code to cover the +/- 1 hour difference (this seems to work quite well) yet when it comes to converting the actual cells it runs incredibly slowly. I appreciate any help but its only the code after "Sheets("data").Unprotect" that i think needs changing. The time stamp is in column 7 - I hope this makes enough sense - which then gets converted by either 4.5 or 5.5 hours dependent on british summer time.
Sub TimeConvert()
With Application .Calculation = xlCalculationAutomatic . ScreenUpdating = False .DisplayAlerts = False .EnableEvents = False End With
Dim FirstDate As Date Dim Position, DayIndex, lgrow, lstrow As Long, TargetMonth As Long, Stweekday, Enweekday, Tdate As Date, TargetYear As Long, cell As Range Dim bst As Boolean
I have been working on a timesheet but the problem I have come across is calculating actual hours worked only in the core hours and any work outside the core hours is calculated in the outside hours column. A standard work day is 7.6 hours working between 8.30am and 5.00pm. However if someone was to commence work either before 6am or after 8pm this is outside of core hours. I have attached an example of my timesheet for you to see what I am talking about.
find a formula that will calculate the hours between the two below values but only take in to consideration the business hours (from 9 to 17) and exclude any weekends?
I have got a formula that can separate day shift hours from night hours, in this case night begins at 7pm to 7am, however the problem is after 12am we get into negative numbers, what formula would fix this and can be combined with the formulas below?
E10 = 19:00 or start of night time hours B3 = start time C3 = end time D3 = day hours workeds =24*IF(E10
1) The output of an excel duration is : 22.00:8.00:25.00 ( day:hour:minutes ) - excel cannot average and work with this number format
2) resolution - =(LEFT(L2,4))+MID(L2, FIND(":",L2)+1,4)/24+MID(L2, FIND(":",L2,7)+1,4)/1440 as an array and Custom Format the cell as [h]:mm - works perfectly.
Q: to be conistent, the initial reporting is dd:hh:mm and then I convert to hh:mm so that excel can process the data. How can I convert from hh:mm to dd:hh:mm so that the excel report can be consistent in presenting the data to senior management?
