It's been several years sine I had to look at calculating amount of time worked.
Can you please look at this old spreadsheet of mine and verify that the formula is correct?
It appears to be ok to me, but I don't want any errors when it comes to paying my employees
Formula: ...
I got a problem with a time calculation, if it's even possible.
I want to calculate the amount of hours that have been woork in a slot.
Example:
First slot is from 08:00am till 17:00pm, time cost 100%
Second slot is from 1700am till 24:00, time cost 110%
Third slot is from 24:00 till 08:00 am, time cost 120%
I'm working from 08:00am till next day 01:00am
So my hours are:
9 in slot 1,
7 in slot 2,
1 in slot 3.
Is this possible to calculate in Excel?
I got a file attached with a sort of layout.
I need a formula to calculate hours worked between specific times. In the worksheet I have, I need to calculate the hours worked between 5am and 10pm, the start time is in C7, and the finish time in D7 the formula need to be in H7, and another formula in I7 to calculate hours worked before 5am and after 10pm .
C
D
F
H
I
Start
Finish
Total
Ordinary
20%
4:00
23:00
19:00
17
2
In a single employee Timesheet spreadsheet:
....................Mon.....Tue.....etc.
In:................6:65.....6:71
Out:............12:07....12:05
In:..............12:62....12:41
Out:............15:66....15:73
Hrs Worked:.....8.46......
How to format the cells in the daily columns and what formula to calculate 'Hrs. Worked'?
In a single employee Timesheet spreadsheet:
....................Mon.....Tue.....etc.
In:................8:00.....8:30
Out:............12:00....12:00
In:..............13:15....13:00
Out:............17:45....17:00
In:................0:00....19:00
Out:..............0:00....20:15
Hrs Worked:.....8.5......8.75. How to format the cells in the daily columns and what formula to calculate 'Hrs. Worked'?
i am trying to make an excel spreadsheet so i can keep track of my hours and pay at work... i know how to do mult and add but i wanted to know how to do the 2 together.... for example
Hours ST OT Total Hrs Gross Pay
8 2 10 ?
i would like help figuring out the gross pay if say for example my st time rated is 21.21 an hr, and the ot rate is 31.82 how can i get the 8 times 21.21 = 169.68 and the OT 2hrs times 63.64 to show up in the gross pay as a total of 233.32 - what would the formula look like?
Lunch is not paid. Holiday and vacation hours get calculated at the regular pay rate. Overtime is anything in excess of 8 hours per day and/or in excess of 40 hours per week and/or over 5 working days per week. Saturdays for most the employees will be overtime because it will be their 6th workday of the week; but it will be regular time for one employee as it will only be his 5th workday of the week.
For accounting and payroll purposes, we need the totals to display in both hour and decimal format.
So far, I have Lunch, Regular and Overtime hours figured out, but I still need to work with Saturday, Vacation and Holiday hours. Also, currently, the time in and out has to be typed in with the colon and AM or PM. Is there another way to input the info without having to type in those items? I'm trying to make it as user friendly as possible.
I have a spreadsheet with 4 columns - Start Date, Start Time, End Date and End Time. In the 5th column, I need to fill in the "Duration" which is calculated as follows :- Duration = (End Date,End Time) - (Start Date,Start Time)
View 2 Replies View RelatedI have a timesheet where user updates start and end time for various tasks.
I have placed a time capture button in the excel sheet (which is simply a macro saying =now() function)
The user clicks it before starting and after finishing the task. The start and end times are captured in adjacent cells.
If the user starts the work, and goes on a lunch break say for 20 min, comes back finishes the task and captures end time, the time difference will not consider break time which is non productive.
How can I incorporate something like 'pause' option so that before he goes for lunch he can temporarily pause the time.
Is it possible that a cell contains both numeric and alphanumeric data and to do calculations on that?
For example: if a cell conatain the value "10a" or "8.5b" etc. Would it be possible to have a column that gives me the hours worked (the numeric value in the cell) and a line that gives me the amount of people that are working on shift "a" (the alphanumeric value in the cell).
Is this at all possible? Or does that require VBA/Macros and stuff (in which case this is posted in the wrong part of the forum )
I have this spreadsheet and in it the time is changed from military time to regular and then I use a formula to calculate hours worked. On some of these the total is off by one minute. Does anyone know how to fix this?
I don't know how to paste the spreadsheet so you can see formulas,
I need to develop a work sheet for agency booked people to count the number of hours worked by them on daily basis. Agency can clock in at three different times and clock out at 6 different times. i tried but could not even develop logic to calculate the total earned hours. i attached the sheet for reference.
View 5 Replies View RelatedI am working on a sheet that will allow a user to enter a start month (from a pre-defigned drop down list) and an end month (again from ddl). What I need to calculate is in what months the employee worked in so I can calculate their salary cost by quarter.
It can populate other cells in order to do the calculation if needed. So, for example if an employee started in May, and worked until December, I need to calculate that he worked 2 months in Q1, 3 months in Q2, 3 months in Q3, and 0 months in Q4. Our fiscal year is April to March.. ;-) I have thought of several options, but none of them have worked 100%.
Is there a way to conver a persons time spent (given in weeks) to adjust/convert to show per month. Attached is the sheet. Do note that week 2/25 - 3/1 is a combination of Jan and Feb so hours should be logically divided into jan and feb...
Name 2/18 - 2/22 2/25 - 3/1 3/4 - 3/8 3/11 - 3/15 Feb mar
Tom 40 10 0 20 ?? ??
name
2/18-2/22
2/25 - 3/1
3/4 - 3/8
3/11-3/15
Feb
Mar
tom
40
10
0
20
??
??
Attached sheet, I am struggling with the formula that will add up the hours overtime worked per day when I enter start and finish times.
Standard working hours are :
mon to thurs 8 hrs per day 8m to 16.30 (with 30 mins unpaid break)
Friday 6 hrs per day
Saturday all hours are overtime
Hours Commited sheet.xlsx‎
i m trying to work out the productivity of employees based on how many hours they work (Time in Back Office). How many pieces of work they complete(Back Office items Completed) if 1 piece of work should take 7 mins. the item in red is what i cant seem to figure out.
View 5 Replies View Relatedto calculate how long a ticket is open in our system before being resolved. I don't want to count weekends, and if the ticket is 'suspended', I don't want to count that either. There is also the factor that the ticket 'un-suspend' date may be later than the ticket 'closed' date. Which is the bit that's throwing me.
So, I have the following fields
Ticket Open, Ticket Closed, Ticket Suspended Date, Ticket Unsuspended Date
A sample ticket might be (using above fields)
02/11/09 09/11/09 04/11/09 30/11/09
That 'should' equal two days (16 hours) as the Unsuspend date falls after the close date so it was suspended from the 4th until closure.
Now I want to know, in hours (8 hour day) how long that ticket took to resolve (i.e close), remembering you can't count the time it was suspended, or any time that fell over a weekend. Also not all tickets are suspended.
i have a timesheet that we are trying to use. the problem is the column that says shift diff. if an employee works after 6:30pm for 1and 1/2hr, he is entitled to shift hours. shift hours is between 6m and 8am.
As long as he works after 6.30pm but works for at least one and a half hour, he will get the shift.
if work, 9am to 7:30pm, and have break between 2-3pm, should have 1.5hrs shift and 9.5hrs total
if work, 7:45pm-9:45pm, and have break between 8:30-9pm, total hrs work is 1.5 and shift hrs s/b 1.5hrs
if work 3pm to 12am and have break between 7-8pm, total hrs work is 8 and shift hrs s/b 5hrs
I work different length shift some of which are over-night. I'm using the formula
=IF(((C1-B1)*24)<0,(C1-B1)*24+24,(C1-B1)*24)=IF(((C1-B1)*24)<0,(C1-B1)*24+24,(C1-B1)*24)
Where cell "B" is start time and cell "C" is finish time. This calculates hours worked whatever shift I'm on.
Is there anyway I can also deduct a hours rest break if I work more than 7 hours ?
Any way to calculate the total hours staff work based on the mininum time of the first transaction to the maximum time of the transactions. I used a DMIN and DMAX function to get those times per employee. The issue is then the time goes over from one day to the next, such as from 11 PM to 4 AM the next day. As you can see in the data below,the fourth record shows the minimum time as 12 AM and the max as 11 PM with total time worked as 23 hours. In this example, the total hours worked should be five hours.
min time
max time
total hours
7:00 AM
16:00
9:00
[Code] .......
I need to create a formula to calculate monthly hours worked (144.20) by hourly rate (£14.25). So far everything ive tried has given me awrong answer. I cant seem to make the total right. From what ive come up with (Not good) the total accepts the hours-just not the minutes.
View 8 Replies View RelatedI have a user form with textBox1 = start time (entered as "[h]:mm") and text Box2 = finish time (entered as "[h]:mm"). I would like textBox3 to display the difference between the start time and finish time as a general number!
For example
Start time: 21:00
Finish time: 06:30
Hours worked: 9.50
Start time: 12:30
Finish time: 23:00
Hours worked: 10.50
I have 2 dates+ times.
1 the contract start date and time.
2 the contract end date and time.
Can I calculate the number of working hours between these two using a formula?
So if I have a 10 hour working day (08:00-18:00), Mon-Fri and the two Dates/Times can I calculate the number of working hours?
Example
Start 06-Mar-07 10:00
End 14-Mar-07 14:00
This is 2 part days and over a weekend.
Trying to get times worked in hours and mins, from a given start time to a given finished time.
I would like H18 to read 14
and H19 to read 13.5 and so on,
H23 and H24 are full 24 hour coverage,
but i get a 0, when using 08:00 - 08:00
as we only deal with a full or half hours, the figures should read whole numbers or half number as in th example above.
Also would like to total all hours worked in H28 to 117 as opposed to the figure given in the attached file.
DAY / DATESTARTENDHOURS
MON22-May200618:008:00 AM14:00
TUE23-May200617:006:30 AM13:30
WED24-May200617:307:30 AM14:00
THU25-May200618:007:30 AM13:30
FRI26-May200618:008:00 AM14:00
SAT27-May20068:008:00 AM0:00
SUN28-May20068:008:00 AM0:00
TOTAL2.875
Couldnt upload the file as it was 75kbs, a
Is it possible to calculate hours if both the start and end time are in the same cell. Unfortunatly the developers of our scheduling program developed it so when you export the schedule to excel it shows Greg in A1 and 3:00pm-9:00pm in A2. I would like to have excel calculate the 6 hours so I can use it to auto generate another spread sheet I am making.
View 10 Replies View RelatedThis is for employee time sheet and schedule. I have multiple employees work a specific shift on various days. I need the calculate the hours worked each day and then have them totaled at the end of the period. Here is and example:
Employee Monday Tuesday Wednesday Thursday Friday Saturday Sunday Total Hours Total Cost
John Smith 10-5 12-6 9-2 5-10:30 3-8:30
How do I get it to calculate the difference in the same cell, convert it to hours, add up all the results and place it in the totals columns then calculate those totals by their pay rate to get my Labor cost?
If a Rescue Officer is called out at 23:00 and is back at 04:00, this should equate to 5 hours worked.
It seems that if my times are all on one side or the other of a 24 hour cycle, my calculation work fine but it it breaks across the 24 hour (as above, it doesn't work.
A2=04:00
A1=23:00
Using (A2-A1)*24 give me -19.00 hours
My SS macro has a line:
s = (wks.Cells(c, 3) - wks.Cells(c, 2)) * 24 'calculates the duration of time worked
Is there any way of getting excel to calculate an elapsed time in hours when the start and end times roll over from one day to the next?
I can calculate total hours when a user enters a start date/time and a finish date/time. The kick is I only want to include hours from 2:00 PM to 12:00 AM (10 hour period). So assuming all the start and end times will be in this range, how can i calculate work hours over multiple days? For example: Start date/time = 2/26/13 2:30 PM and end date/time = 2/28/13 10:30 PM. I want my calculated hours to show 28 hours.
View 1 Replies View RelatedIs there a way to calculate the number of hours between two times specified like this:
Start
End
Hours
Comments
Mon 6:00p
Mon 9:00p
3.00
Same day
[Code]..
I think I can write a UDF and that may be the easiest. Is there a straightforward way without a UDF?
I have problem to calculate the time which is more than 23:00:00hrs in a file. I need to compare the benchmark time and the difference of time(start time and end time) and show pass/fail depending on benchmark set time. For few of the times which is more than 23:00:00 hrs the format is taking different(example: for 49:15:48, it is showing 02/01/1900 01:15:48 in formaula bar) for which i am not able to use formula and know pass/fail.
View 4 Replies View Related