Before I start a User Defined Function, does anyone know of away to round thousandths up to next hundredths ($US)
Ex
.031 = .04
.032 = .04
.039 = .04
Just an example of course the actual range of possibilites much larger.
Is it possible to get excel to work out a formula but only allow the end values to fall as a 0, 2, 3, 5, 7, or an 8?
For example, show a value of 1881 rounded down to 1880 or 1880 rounded down to 1888.
I have a number say:
156.9679628 then I go to format to change it to 2 decimal then it would show
156.97 and then I c&p that ... I still get 156.96796284 how do i just get
156.97
round to two numbers. i have this formula
View 3 Replies View Related19.25581
1.01346
3.29376
0.25337
0.25337
1.26683
Total: 25.33660
If I use the Decrease Decimal on the total 25.33660, it becomes 25.34. How do I round all the sub numbers so that 25.34 is achieved.
Is there an easy way to round a range of numbers up? I have a big list of prices and I would like to keep the two digits after the decimal point as .00, but round up the main number. And I would like to do that without writing a formula in every cell. Is this possible?
View 12 Replies View RelatedI am trying to get a number from a cell ( lets say A1) multiply by another current number shown in a different cell (lets say B1). The number in cell A1 is 1.758. However, I have it set (through the cell format settings) so it rounds it up to 1.8. Now, when the number in cell B1, lets say it is 1, is multiplied by A1, the answer is 1.758, but I need it to multiply by the number shown (1.8) and the answer should be 1.800. How can I get it to do this?
View 12 Replies View RelatedI have a formula that shows "two cells numbers" in one new cell with spaces between, (see below) but when I enter a round numbers it drops the .0 I want to keep it as a .0 The formula I have is below for the two cells. I take the numbers from (cells B8 and C8) and put them both in one cell with spaces.
Cell B8 C8 Formula I'm using to get both numbers to show in one cell is
2.0 2.1 =B8&" "&C8
If the number in either cell is 1.2, or 1.3, it is fine. But if the number is 2.0, it drops the .0 from the cell showing both numbers. I need it to always show the .0 (or whatever) whether it be a .1, .2. or .0
I want to compare 3 columns of data across the same row with an IF statement to verify that all 3 numbers match. I would like the IF statement to only look to the first decimal place, rather than the entire number. In the first example, all columns equal. In the second example all columns equal only to the first decimal place. In either case, all 3 numbers would be equal when rounded down to one decimal place.
Example 1
Column A Column B Column C
84.5 84.5 84.5
Example 2
Column A Column B Column C
84.51 84.53 84.52
I have a sheet that has conditional formatting that looks at column D2 for a number and divides that by half. it then colors in a corresponding cell on a row in the sheet that matches that number. the problem i am having is with odd numbers like 23 it gives a result of 11.5 . all my cell numbers are all rounded to whole numbers. i need to round the 11.5 to 12 or 13 it does not matter which one... i just need it to round it up or down. I have tried everything i can think of but have had no luck. I attached my workbook so you can see how it works.
View 4 Replies View RelatedI have to change the layout of my numbers. At the moment the number have 3 decimal places but rounded to two decimal places and are separated with a dot (value in excel is 272.664 but shown just 272.66). After the macro or excel formula the output should be 000000000027266. So the last decimal places should be deleted (but the amount has still to be rounded!!!), the amount should be without a dot and the number has to be always 15 characters long (like in the example the above just with ceros before the number) I tried it in Format Cells but I couldn’t find anything. If I use the find and replace function to delete the dot, the third decimal place will be shown. Does anyone know if I can format it in excel or using a VBA code to change the number?
View 2 Replies View Relatedi want a cell to round itself. i have a form i'm filling out, based on a percentage of a dollar amount. when the formula calculates, it only shows the first 2 numbers past the dollar point. however, the cell still "knows" what the number is. I have several of these formulas on a spreadsheet, and the sum of them at the bottom of the page is NOT what would you would get adding up the numbers you see on the page, as it is calculating numbers you can't see.
View 5 Replies View RelatedIf I have cells that are formatted to a certain decimal width, say, 2 digits, cells that have the value of 3.599 will appear as 3.60. When I reference this cell in VBA, how can I have it pickup the 3.60? Currently, something like Range("A1") or Range("A1").Value will pickup the 3.599.
I feel like theres something thats like Range("A1").XXXX that will get me there, but I can't seem to guess it.
I am trying hard to use excel macro to round up cell value to next complete figure when it reaches to 0.6, however it should show the first five "0.1, 0.2, 0.3, 0.4, 0.5 exactly. I am giving increment of 0.1 digit to A1 Cell, it is going well. I am unable to get the next complete figure when 0.6 comes. Is it possible in macro.
View 3 Replies View RelatedIt's been awhile since I've done this...and I tried searching for the solution but to no avail.
I'm trying to edit the contents of a series of numbers by using the Rounding function. When I execute my macro on the next cell, it uses the value of the original cell when the macro was created. Here's a copy of my macro:
Sub RoundTest()
'
' RoundTest Macro
' Macro recorded 7/26/2007 by Aramark Uniform Services
'
' Keyboard Shortcut: Ctrl+l
'
ActiveCell.FormulaR1C1 = "=ROUND(2103.86,0)"
ActiveCell.Offset(1, 0).Range("A1").Select
End Sub
the way my spreadsheet's set up so far is that each employee should have a goal of, say, 100 for how many people they need to sign up. But they each have specific geographic breakdowns in their turf, some of which might be bigger or smaller than others, but at the end should all add up to 100 for each employee.
It's not super hard to do since I just take a goal of 100, in this example, and multiply it by the percent of population of the area in their overall assignment and give them a goal for that area based on that. So if Philadelphia has 70% of their total population, Upper Darby has 20% of their total population, and Phoenixville has 10% of their total population -- the goals would come out like this:
Philadelphia, Goal: 70
Upper Darby, Goal: 20
Phoenixville, Goal: 10
Ryan, Total Goal: 100
For some of the employees, that works out perfectly -- but based on the population sizes, the rounding sometimes gets a little off and it could end up like this:
Philadelphia, Goal: 71
Upper Darby, Goal: 19
Phoenixville, Goal: 11
Ryan, Total Goal: 101
For most employees, it ends up being dead-on 100 -- but there are some whose totals are at 98 or 99 or 101, and I was wondering if there was a way to force it to shave a point off or add a point on somewhere, pending on how close the decimal was when it rounded to make sure that it always ends up exactly on 100. (I'm using 'Data >> Subtotals' to get what's being represented above as "Ryan, Total Goal.")
I have a cell that is going to be used for the quantity of a certain item. I would like to dummy proof this sheet as much as possible so that if someone puts in 21.5, that it will do something like change the value to either 21 or 22, since there can't really be a .5 of this item.
View 5 Replies View RelatedI am creating a time tracking tool.
I would like a macro or event, etc to round an inputted time to the nearest 15 min increment upon exit of a cell.
For example, a user inputs a raw time into cell B5. Upon exit from B5 I would like the macro to round that time to the nearest 15 minutes and keep the time in cell B5. All of the cells in column B would need to have this capability.
1. How do I call teh macro upon exit from the cell
2. What is the code to grab that data from the cell in column B, round it to the nearest 15 minute increment and then put that value back into the same cell?
Is it possible to have this function work to round in the same cell the data is entered in? ...
View 9 Replies View RelatedI would like to be able to round off the decimals resulted in the POV field on my worksheet and have a running total of the entries listed below. This occurs sometimes when the mileage units have decimals. In this example, the POV values display $1.00, 99 cents, and 93 cents. Their resulting total should be 2.92, but Excel calculates them as $2.93 due to the additional decimals.
The problem is that if I apply an =ROUND function to the formula in the POV field, while it will display a correct answer if all the date and mileage fields are filled in for which the formula has been applied, it will not give a running total in instances where there are empty date/mileage fields, reporting "VALUE!". Is there a way to force Excel to display the running total?
I have attached the worksheet, with the example above entered in. I have included the formula I've been trying to fix on my worksheet on the bottom as well.
I have dropdown list on E1=Round1, Round2, Round3. I have select Round1 and enter value in Cell A2,A3,A4.....A20. / Select Round2 and type values in cell A2,A3,A4.....A20. I want to copy these values to another worksheet and retrieve again when selecting Round "x"
View 1 Replies View RelatedI don't know if there is a setting I'm missing or I'm going mad but when I use the round function in VBA it doesn't round.
I am using Excel 2000. See the example attached.
In the cell A2 I have a value 0.525, cell B2 has a formula "=round(A2,2)" which = 0.53, but cell C2 is assigned via VBA ie
Sheet1.Cells(2, 3).Value = Round(Sheet1.Cells(2, 1).Value, 2)
and the result is 0.52??
I'm going to be using a spreadsheet to keep track of where different people are at. So if Person 1 is in Room 3, I will stick a 3 in the box next to their name and then can look at the spreadsheet whenever I need and see what room they are in. When I'm deciding what room to put a person in, though, I need to be able to quickly glance at a list of Room #'s and see what one's are still available. So I have a bank of Room #'s in the spreadsheet....1,2,3, etc.
What I'd like, is some way to set this up so that when I put, for example, "3" in the cell next to "Person 1" the spreadsheet automatically removes "3" from the bank of available Room #'s and when I delete the "3" because the person has left, it adds "3" back to the bank of available Rooms.
I have a mass of data which look something like this:
table removed
and I require the ranges of reference numbers to be listed in a column one above the other, which requires inserting new rows. I also need the date & description columns copied down into the newly inserted rows.
So basically for example I would want the top row to now read:
table removed
and then apply the same procedure to the other ranges below this.
I am looking for a formula to grab only the numbers withing a cell that has text in it i.e (John Peters142 lp) or (Sally Jones54) or (Terry Cram310 jkb) sometimes there will be text after the number and sometimes not, the format is as shown with no space between name and number but a space after the number.
I added a sheet for visual example.
I need the " solutions cells " to match to the " source cells " and return a " yes " or " no ". in cells d4:d10. Ex: #1 cell C4=01234598, it will conduct a search & match of cell A5 which contains the number 123, since cell C4 contains all 3 numbers from cell A5, then the formula would result in a " Yes ". The match has to contain all 3 numbers from the solution cells to the source cells.
Ex: #2 cell C7=67891234, it will conduct a search & match of cell A8 =901. Since cell C7 only contains the 9&1 from cell A8, it would return a " No " because cell C7 did not contain all 3 numbers from cell A8. I'm not sure if the IF, Match, Index or Count formula is the right one to use, they all seem to partially work, but still don't complete this problem.
multiple numbers and text are in single cell which are separated through spaces or comma, is there any formula which can bypass text and add all the numbers in the cell.
For example:
red 12, yellow 10, green 5 27 red 3, blue 9 12 yellow 21, blue 3 24
Using vba how to round off the value e.g.: The number 582.356894 has to be rounded off to 582.4 ....
View 1 Replies View Relatedi have a list of minutes in cells a1-a5 say 123 256 147 158 235 divided by 60 giving a total of 15.3 hours. i want the hours to round up if over the. 5 mark or round down if under .5 how would i get the desired result?
View 2 Replies View RelatedA cell value is calculated via a formula in vba. I want to round the result down to the nearest odd number or down to the nearest even number, depending on conditions in an other cell. The result is already an integer.
View 8 Replies View Related
