Row Color Depending On Cell Value
Sep 3, 2009I was wondering if it is possible to fill a row with a color depending on the value of a certain cell. Say, if the value of cell N5 is 0 then row 5 turns red.
View 3 RepliesI was wondering if it is possible to fill a row with a color depending on the value of a certain cell. Say, if the value of cell N5 is 0 then row 5 turns red.
View 3 RepliesI have another macro request.
I would like to ‘grey out’ a certain qty of cells depending on the 1st number in another cell. So 1st of all it would have to check in column B to see if there is any data and then check for the first number in that cell (there will be many numbers in the cells but we only need the 1st one (Ex.: B3 = “3 / 8 & 8”).
Then it should start counting from column D the found number of cells multiplied by 2.
Ex.: if Cell B3 contains “3 / 8 & 8” it will count 3 x 2 = 6 (3 cells x 2 = 6 cells)
Then, if after that count (now at I3), in the next cell over (J3) if the is data in the cell above (J2) then it should apply an Interior.ColorIndex of 15 for the next cells until there is no data in the cells above (if nothing after K2 the grey will be applied to cells J3 & K3 only).
The code changes the cell color depending on how many clicks you give it.
The code it self works fantastic but the problem i have is if i manually unlock the sheet every time i click any where in sheet it locks it again.
Private Sub Worksheet_SelectionChange(ByVal Target As Range)
On Error GoTo Error
Dim I As Integer, I1 As Integer, ws1 As Worksheet
Set ws1 = Worksheets("36hr Plan")
ws1.Unprotect "muppeticity"
I1 = 40
For I = 5 To 25 Step 5
For I1 = 22 To 204 Step 13
Offset1 = 0
If Not Intersect(Target, ws1.Cells(I1, I)) Is Nothing _
Or Not Intersect(Target, ws1.Cells(I1 + 1, 5)) Is Nothing _
Or Not Intersect(Target, ws1.Cells(I1 + 2, 5)) Is Nothing Then.............
See attached work book, it is an mot booking system that is all working fine except for one thing that I don't know how to change.
At the moment if you double click a cell in the test type column it enters the required data and turns the cell green highlighting the length of time and values this is all good but I am wanting the ones that start with n-side to turn yellow just so that we can see our own internal tests easily. It is control in the coding not formatting . Is there a way this can be done?
I have an excel spreadsheet where column "D" will have one of fifteen different names inserted. According to which name is present, the cell needs to be a specific color. Any ideas on what would be the best code to use to read the entire column and format the cells that have names?
View 9 Replies View RelatedI have a template I have been asked to amend and I know I need to use Conditional Formatting I just can't crack the formula I need to use. Cell A2 will have either "CD" or "CW" or "IN" input into it
When user inputs either "CD" or "CW" into cell A2, I want cell G2 to have "Margin Movement" automatically displayed. When user inputs "IN" into cell A2, I want cell F2 to have "MV" automatically displayed, and I want cell G2 to be coloured in bright red fill. Then user is to go to cell G2 and input some text as a description, and I want the red fill to disappear once they have input something in there.
I thought I had it licked using IF statements for the "Margin Movement" and the "MV" cells, but I can't get the conditional formatting to work - I assume this is because the cells aren't technically "blank", as they have IF statements in them.
My colleagues are working on multiple projects at once. The projects got different priority, so I'm looking for a formula that change the cell color if a person is working on it, depending on the project's priority.
For example if John is working on project: East(pri.1), South(pri.2) and West(pri.3). On East he got 5 remaining hours (cell E8). Then i would like that cell to turn red. For South green and West red.
Afternoon everyone i am having abit of trouble working on an excel 2007 spreadsheet. In cell I1 i have a tab called Color. i want the cells below I1 to be filled with one of 3 colors green, yellow, or red depending on whats in cell F "Status" (closed or open - in progress) and cell G ECD for estimated completion date.
Green - i need it to fill green if status is closed. Yellow - need it to fill yellow if ECD is any date greater than today and if status is open. Red - need it to fill red if ECD is todays date or older and status is open.
I want to change the colour of a cell depending on its value, when compared to another row of data identiified by a value in another cell. To try an clarify:
b3 = 1 b5=4 Because b3 = 1 then compare cell b5 with the row g1 as b3=g1 then depending on its postion set a colour
g1= 1 g2:g5 = 2,3,4,5,6
h2= 2 h2:h5 = 7,8,9,10
I'm trying to create a tag with a color border. What I desire is to fill the BLANK cells around the tag, A1:D1 + D1:D19 + A1:D19 + A1:19 in a certain color based on the text value of the cell B11. There are 5 different values, such that if the B11 read Red Sox - the boarder is going to be red, if it reads Houston Astros it will be dark blue, etc..
I have a similar problem with changing the color of the cell based on the month. So regardless of the year, 2014, 2015, 2016, etc... If I use MONTH() function I can just get numbers from 1-12. I want Cell C16-C18 to be certain color depending the date entered in cell C17 such that for each quarter, months 1-3, 4-6, 7-9, 10-12 they are different color.
I have had no luck with conditional formatting (and I also believe that it is good up to 3 cases only). I am decent in logic/programming language but have little knowledge with macro notation and especially how to run them in excel 2013. I do know how to start it alt+F11 and that I need to make sure that code is written under the specific sheet where my tag is located.
I would like to know the formula to highlight the color of text in particular cell if the value of the particular cell ( value is text ) is so and so.
For Ex: If the J6 is "Vacation" then the J1 text should be in red color.
how to make a cell a color depending on a number in a different cell? Example...if A2 is 92.6 how would I make D2 blue? But if A2 were 91.9 how would I make D2 red?
View 5 Replies View RelatedHow can i do sum of the values which are in red color
CODEAMTA1B2C3D4E5F6G7H8
I want change color Font depending in my if then else.
I have workbook with several sheets, but i need change colorfont Is that validation is true.
The number are in Sheets("PSDATA").Range("AA")
Private Sub color() .....
when I execute this code on the selected cells, it completely ignores my selection, and makes the entire worksheet black.
Sub ColorCells()
Dim cell As Range
For Each cell In Selection
If cell.Value = "U" Then
cells.Interior.Color = 3
I have some real estate rental so what I did 7 columns and its includes: name, phone number, ....., contract start date, and contract expiry date.
my question is how to make the row color changes depends on the expiry date
for example, the expiry date is 12/10/2014. I want the the row to be red when 12/10/2014 comes.
I have column "C", starting from "C5" with dates till C200, but not all cells have dates some of them are also blank.
I want the cell to change color depending on the date.
If the written due date is in a month from today, I want it to turn yellow, and if the due date is in the past from today, I wanted to turn red. I want it to get updated every month.
I need change the color of the cell depending on the following conditions. (By the way the column will have names list)
1. single punctuations are allowed anywhere in name apart from first position.-->color should not change
2. If any name got consecutive punctuations --> color should change to RED.
3. Any punctuations apart from Dot(.), hyphen(-), apostrophe('), Space( ) are not allowed-->color should change to RED.
Example-
ShivakumaraNo Change
Shiva kumaraNo Change
Shiva'kumaraNo Change
shiva.kumaraNo Change
shiva kumarared
shiva''kumarared
shiva' kumarared
shiva. Kumarared
shiva.'kumarared
shiva:kumarared
Summary of performance of various products against target is as follows,
Product vs Target
Color Code
Result
CH4OH
Green
1.0
[Code] ........
I need the final result automated as follows,
If 2 green of the 4 products, then final result Gree
If 2 Amber of the 4 products, then final result amber
If 2 Red of the 4 products, final result Red
Is there a way to automate this?
I am trying to use VBA in Excel 2007 to change bar chart series colors. I have found a few posts that link it to a cell background, but I'm struggling to find one that does the font color.
It would be great if I could change the bar chart series to match the color of the text in the A column, so that if I highlighted the value in A1 and changed the text color to orange for whatever reason, the chart updates the value of 1.2 to an orange bar (see below).
T. A1 B1
Sample 1 1.2
Sample 2 2.1
Sample 3 1.7
Sample 4 5.6
I have a range of cells that change colors with conditional formats based on the cell value from high to low. I would like to link the cell color to an object such as a circle or rectangle. When the cell value changes along with the conditional format, the color of the object will also change.
View 3 Replies View RelatedI have got a userform with lots of controls,
One of the action's on a large group of the controls is the same but except for one number
here is an example
If TextBox107.ForeColor = 255 Then ActiveCell. Offset(0, 53).Font.ColorIndex = 3
If TextBox108.ForeColor = 255 Then ActiveCell.Offset(0, 54).Font.ColorIndex = 3
If TextBox109.ForeColor = 255 Then ActiveCell.Offset(0, 55).Font.ColorIndex = 3
This makes a cell that correlates to the textbox red if the text in the textbox is red.
Now, I loads of these textboxes that all need to run the same code with just the Offset value one digit higher than the last and I was hoping I could create a loop to avoid a huge block of code but I can't work out how to make a constant that will +1 with each loop.
Also, can I assume that a loop will start with the control with the lowest number i.e. Textbox1 and then work its way through the rest of them in order?
I'm trying to add a textbox at the current position (selected cell) with a set size, fill color, and border color. I found this: http://msdn.microsoft.com/en-us/libr...8(VS.80).aspx:
View 2 Replies View RelatedThis is probably elementary, but I'm struggling and would appreciate any help as I have very little excel VBA experience to draw from.
I have assembled code which changes the cell color based on a value change in Column A. Column A will contain many different groups of repeating values. This code works well and and I have been able to figure out how to limit the number of colors to only 2. The end result is each set of similar values in column A is visually grouped by one of two alternating colors.
The number rows in the data set is variable as the data set is extracted from SAP. The number of columns is fixed.
What I want to do now is set the cell color in columns B through F the same color that was assigned to the row in column A. So if cell A3 is set to colorindex = 6, then I want to set the range of cells B3 to E3 to the same color.
Here is the code I am using to set the color of the cells in Column A:
I would like to be able to change the color of a cell in V4:AB31 and have the formula in AM10:AM13 automatically calculate the new result. As it is now the user has to press Ctrl ALT f9 for the formula to recalculate.
View 7 Replies View RelatedI have two columns. The first one (A) contains cells that have different Fill colors. The second column (B) contains text adjacent to the colored cells. I am trying to change the color of the text in the second column (B) to the corresponding color in the adjacent cell in the first column (A). I don't think conditional formating works well in this situation. I believe the solution would be some sort of macro.
View 3 Replies View RelatedI have font color white in blank cells in column E and I (from row 5 to row 245) so the visitors will not see the text. If any of these cells become yellow (color code is 6), the font color will become black so visitors can see the text alot far better than white. I've tried this code myself after this post but nothing happen
View 4 Replies View RelatedI have various row cells in column (F) filled with the color Green. And corresponding text in Column G. How can I change the text of that particular row to white.
i.e.: if any cell in column F is Green, change the text color of that row in Column G to white?
if it actually possible to colour data points depending on the colour of the cell of the data it refers to? if not is it possible to colour it any other way
i have uneven amounts of data for weach month but still want the months to be displayed, this is the best way i can think of of doing this
I am looking for a very simple script that will achieve the following:
On the clicking of a button, Select and shade in a cell yellow, delete the yellow shading of the previous cell. The shading & selection should move up a column of cells, 1 at a time, in the following order:
From B10 to B9, then B9 to B8, B8 to B7 etc until the selection and shading is at B2. Once it is at B2 subsequent clicks will simply keep it at B2 (the top). Thus after 8 clicks the shading & selection should travel from B10 to B2, with only 1 cell being shaded yellow and selected at any one time.