Run Macro If Formula Result Is 1

Jan 23, 2012

I have a spreadsheet containing 2 sheets. In cell A3 of sheet 1 I have a formula that generates either a blank or "1". In sheet 2 I have a macro called Index which I would like to run when the formula in A3 displays "1".

Having done some research I know that the worksheet change event does not work with formula changes so have tried the worksheet calculate function but to no avail. I have done a lot of searching but cannot find what the problem is.

View 6 Replies


ADVERTISEMENT

Macro: Place Result Value Instead Of Formula

May 9, 2008


I am testing the code below...

Sub applyCombination()

Dim shtP As Worksheet
Dim j, k As Integer 'j = row; k = col

On Error GoTo errorhandler


Set shtP = Sheets("Sys-Year")........

k = k + 1
Next k
j = j + 2
Next j

Exit Sub


errorhandler:
Exit Sub

End Sub

and, as it is a bit slow to paste a formula in each cell, I was wandering:

Is there any way I can place the resulting value ONLY?

(I don't want to do copy and paste special just values as it takes even more time)

View 9 Replies View Related

Having Macro Act Upon Formula Result In Cell

Nov 10, 2009

I have created a visual schedule for my team using Excel (2003, SP3 if that matters). Essentially, the user puts in pre determined 1-3 character codes in individual cells, and the macros I have act like a complex Conditional Formatting to keep the formatting neat and consistent throughout the sheet. The actual values are inputted directly into the cells though (this is pertinent to my question), and are things like "A" "M" "$" and "TR"

I have a sheet for every day in a week. Since there are multiple team members on any given day, I have recently made another sheet which pulls a single Team Member's schedule Sunday through Saturday and displays their schedule for the entire week. I have used formulas (specifically VLOOKUP) to do this.

The problem that I am having though, is that the macros that I made to format the days of the week sheets, do not seem to recognize the result of the formulas in the individual Team Member's sheet, and thus do not format them as desired.

My macros are written to evaluate a cell's value via [ Range("example").value ] and will act upon it accordingly with more code. I am assuming that a [ Range("example").value ] would see a cells value as the text of the inputted formula, and not the result of that formula. Is there any way around this? or do I need to avoid the formulas all together and write in code to just copy over what I need?

(I hope this makes sense)

View 9 Replies View Related

Display Result And Hide Macro Formula

Mar 17, 2009

Excel 2003.
I have been struggling for an hour how to hide a number to text macro in a way that only macro result is displayed in a cell.

(I have one 2-3 years old xls, where I have managed with task, but now can't figure out how and how to unhide the macro
Can it be password protected somehow?

View 9 Replies View Related

Simple Macro - Copy Result Of Formula

Dec 14, 2009

I am trying to implement a simple macro. Here is my
Function Age(DOB)
Age = Int((Now - DOB) / 365)
End Function

Sub Macro1()
Age (Selection)
ActiveCell.Offset(0, 1).Select
******
End Sub

The function basically calculates the persons age using their date of birth. What I need to know is how to copy the result of the function into the cell next to the selected one. (The code above only selects the adjacent cell).

View 9 Replies View Related

Run Macro Code When Formula Result Changes To Negative

Mar 30, 2008

Am trying to get the sheetcalculate to be triggered and execute VBA code when a formula changes its result from positive to negative. The code works fine if I trigger it with a command button click. Auto Merged Post Until 24 Hrs Passes;

View 2 Replies View Related

VBA / Macro For Delete Entire Row If Formula Result Is Zero / Blank

Apr 27, 2014

I'm looking for a VBA/Macro for delete the entire row if a particular column formula result is zero/blank.

View 1 Replies View Related

Run Macro Based On Result Of IF Function/Formula In Cell

Sep 14, 2006

how to run a macro from an IF function, if the function is true macro 1 runs if the function is false macro 2 runs.

View 2 Replies View Related

Automatically Run Macro On Formula Result Obtained From Pivot Table

Jun 26, 2006

I currently have an excel file set up which is refreshing imported data every minute from a server. This data is located on " sheet 1".

This data is the result of another system constantly monitoring (pulling data from) the process at my factory. It consists of temperatures, speeds and other settings.

When a temperature, speed or setting changes then it will be captured by the monitoring system and therefore my excel sheet will load it into the imported data within the next minute.

I would like to be able to capture the change in temperature, for example, if it goes into alarm and automatically send an email reporting this alarm. This alarm is captured in my imported data in a specific column with a 1. If it is out of alarm it is 0. There will not be a report of an item, at any one time, with both a 0 or 1... so there is only one case of any one monitored process.

I have a pivot table set up to filter all the uneeded data out and I currently refresh it manually to show the current status of all alarms. If an alarm occurs on the process, I can refresh my pivot table and it will be indicated with a 1 until it is refreshed again (and the alarm is gone).

So the question:

1. How can I refresh the pivot table automatically every x seconds?
2. How can I automatically send an email on the value change from 0 to 1 in case of an alarm?

View 3 Replies View Related

VLOOKUP Formula Dragdown Copies Previous Cell Result Instead Of Unique Result

Jun 10, 2014

When I drag my VLOOKUP formula down a column in Excel 2010, the return value copies the formula result from the original VLOOKUP formula result. For example, if the first VLOOKUP returns a value of 0.5, I expect to see 0.5 or 1 in the cell below that one. However, I get 0.5 which is not the expected result for the cell below.

When, I click the fx on the cells below, the expected return values appear in the formula result. After I click OK, the expected formula results updates and now appears in the cell.

I'm not sure what is causing this issue. My computer was updated recently from an old machine to a new one. I have never experienced this issue before.

View 3 Replies View Related

Copy Formula Result & Paste Value/Result Only

Sep 3, 2006

I created a simple auto numbering function whereby Cell A7 contained =Row()-6, and Cell A8 contained =(A7+1). I then shift, and pasted the contents of cell A8 until cell A600. My aim is to simply copy the increments of 1 - 600 into another column. However when i copy and paste i'm also copying the initial underlying formula ie: =( A?+1), Is there a way to copy the results, not the formula?

View 2 Replies View Related

Formula Cell Showing Formula Not Result

Aug 24, 2006

I know this is an easy one but I'm unsure why I can't easily modify a formula. The key event in this formula is "+190". Every time I change the value the formula no longer works. I've copied to another cell and the formula no longer works. My question is when you have a formula like this one if you have to modify how do you do it and keep the formula working.

View 9 Replies View Related

Display Formula Not Formula Result?

May 2, 2012

I have a s/s which is built on IF functions and references other sheets and I have used the s/s in the past without issue. However now I want to ammend the formula a little and excel will only display the formula itself, not the result of the formula. I have tried CTRL ~ to turn on/off the show formula function but this makes no difference.

My reason for changeing the current formula is that I need to turn a 2 (numeric) to 02 (which can be either numeric or text). This is the new formula.

=IF($A4="","",IF(VLOOKUP($A4,HCGTH1_DATA,22)=2,"02",VLOOKUP($a4,HCGTH1_DATA,22)))

Is there an issue with the formula or some setting in excel?

View 6 Replies View Related

Formula - Different Apparent Result

Jun 22, 2007

I have a workbook consisting of 4 worksheets. Cell B5 in each of three of these sheets has the exact same formula (copy/pasted) referring to data in the other worksheet. In one of the three similar sheets cell B5 shows up as a blank. In the other two, this cell shows up as a zero.
Since the formula in each of these cells is identical, I figured the difference in the way the result showed up was a matter of cell formatting.

The cell format for each of the three is indicated as ‘general’. However, with one of these, the ‘sample’ shown when you view the cell format shows as a blank while the other two show the ‘sample’ as a zero (0). How can I go about making all three cells appear the same, namely a blank?

View 9 Replies View Related

Getting The Total From The Result Of The Formula

Aug 1, 2009

I have already an existing formula to get only the amount from the previous cell. From a6 to a30 it contains the word "11/05/09 press release $100", so in b6-b30 this is the formula. =IF(ISNUMBER(SEARCH("press",A6)),RIGHT(A6,LEN(A6)-FIND("$",A6)),"") until b30

the problem is in b6:b30 the 100's were not a number you have to copy and paste to other cells using paste special then values then click the smart tag and convert as a number to get all the total from b6 until b30.

View 4 Replies View Related

IF Formula And If The Result Is True

Aug 13, 2009

Is it possible to use the IF formula and if the result is true, to run another formula and if the result is false put a "0" in the cell???

Here is an example...

In cell A1, I have an amount of money.
In cell B1, I have a quantity.
In cell C1, I want to use the following IF formula:

=IF(B1>0;((A1)*(B1)*0.15);0)

At the present time, when I do this, when the result is true, I see ((A1)*(B1)*0.15) in the cell instead of what that formula should give.

View 4 Replies View Related

'greater Than >' Formula & Result

Aug 14, 2009

Column B is basically 550 points + column C = Base Roll.

We need to introduce a cap so no more than 1000 points can be displayed/earned. So column G adds all points & column F caps.

So far it's all ok.

Now when i add a value to column E (points spent) those points are deducted from column G instead of the capped 1000.

Entering a value of 500 displays 800 in column F instead of 500.

View 14 Replies View Related

Copying Result Of Formula

Sep 10, 2009

I have a formula that returns a string using the concatenate function. Now I want to copy the string to another cell without copying the formula. The string will become a record in a CSV file. I cannot figure out how to make what shows on the screen a label cell instead of a formula cell.

View 3 Replies View Related

Output Formula Result

Feb 14, 2014

How do you write a code that will calculate a formula and output the result in a cell?

For example:

A1 = 1 (Named "Cell1")
A2 = 2 (Named "Cell2")
A3 = Results of macro for Cell1+Cell2 = 3

Is there a way to write it if I also want B3 = B1 + B2 and C3 = C1 + C2, etc.

View 6 Replies View Related

VBA - Convert Result To Value Or Else Keep Formula

Mar 7, 2014

Any way to convert a cell result into value if it meets the criteria or else the formula stays in place

I have same formulas from cell Q17 to Q1000 some of those cell will have different results based on manual inputs that occur daily.

I would like the formula result to convert to value only if greater than -1000 or else keep the formula in place to continue future calculations till it meets the criteria.

View 2 Replies View Related

Formula In Same Cell As Result

Dec 15, 2009

I have a value in Cell A1. Now, I need to be able to enter a number into Cell A3 and upon hitting Enter (or clicking elsewhere), the number I just entered into Cell A3 needs to be replaced with the number I just entered multiplied by the number in Cell A1. For Example: Cell A1 contains the number 1.05. I type 2.50 into Cell A3 and upon hitting Enter Cell A3 reads 2.625.

View 4 Replies View Related

Copying A Formula Result

Feb 27, 2007

copying a formula. Basically i want to paste special a formula result automatically.

I have a if function set up so when 2 days corespond then in the 3rd cell it records the value, however when ever the date changes the value disappears, i can keep the value u there by paste special but i would love to set this up as an automatic thing once a value is recorded it records the value and deletes the formula, or the value doesnt change when the date (thus the condition) changes...

View 14 Replies View Related

Display Formula In A1, Result In A2

Sep 26, 2007

I have a formula in A1 that I would like to execute from A2. I want the A1 to display the formula (so no "="), but I would like cell A2 to execute the formula in A1.

If A1 contains: "SUM(1+2)", how can I get A2 to display "3" without reproducing the formula?

A1: SUM(1+2)
A2: ????

I suppose I'm looking for something like this:
A2: ==A1
But, of course, that doesn't work.

If I do this it gets close:
A2: ="="&A1

But that returns "=SUM(1+2)" instead of executing the formula.

View 9 Replies View Related

Get Legend Along With The Result Of A Formula

Sep 30, 2008

I'm working on an evaluating spreadsheet where I give for several items a rate of 1 to 3 and at the end it calculates an average rate. The average rate would range from 1 to 3 as well and their meaning is:

1 - poor
2 - average
3 - good

How can I work on the formula so when the result is equal 1, 2 or 3 it automatically gives in the cell right beside the related legend?

View 3 Replies View Related

Update WS Name With Formula Result - VBA

May 10, 2012

i am trying to update the name of a worksheet with a formula but cant figure out how to do it.

the formula im using is

"=TEXT(MONTH(TODAY()),""00"")&""08""&TEXT(TODAY(),""YY"")"

basically it needs to return "mm08yy" and insert that as the worksheet name.

i can get it to work for a specific cell by using

Range("A1").FormulaR1C1 = _

but i cant use that when i have Sheet1.Name =

View 2 Replies View Related

Result Of Formula In Other Cells

Dec 27, 2006

Is there a function that gives the result of a formula is it was entered in another cell?

For example, if I have named an INDEX/MATCH function, is there a way to get the result of that function if it were entered in an adjacent cell?

View 9 Replies View Related

SUMPRODUCT Formula- Getting #VALUE! Result

Nov 21, 2007

I'm trying to use the sumproduct formula to query 3 columns: I want it to look in column E for either a "P" "C" or an "A", multiply the corresponding numbers in column D and F, and put the sumproduct total in cell C5, D5 and E5 for each formula below. The problem is that I keep getting #VALUE! result. It's because some cells in the range have #N/A in them, but I can't control that.

Here is my formula:

=SUMPRODUCT(--(E9:E70="P"),D9:D70,F9:F70)

=SUMPRODUCT(--(E9:E70="A"),D9:D70,F9:F70)

=SUMPRODUCT(--(E9:E70="C"),D9:D70,F9:F70)

How can I use this formula if for example cells D15-17 have no values or are #N/A?

View 9 Replies View Related

Sumif Formula If The Value Is 0 I Need The Result To Be 0

Jan 28, 2009

The value in A1 can range from 0-10. If the value is 0 I need the result to be 0, if the value is 1-10 I need the result to be the number multiplied by 613.35 plus 29.35 for example =sum(1*613.35)+29.35 or =sum(2*613.5)+29.35.

View 9 Replies View Related

See Array In Formula As Result

Jul 4, 2009

I´m not sure if this is possible: if I have an array in a formula, for example ={A,23,1,O,6} is there a way that I can put "A,23,1,O,6" in the cell where the formula is? so that the result of the formula is a concatenation of the elements of the array?

View 9 Replies View Related

How To Reference The Formula Not The Result

Jul 11, 2009

I am setting up a spreadsheet that we can use with EditGrid online so we can post it in Forums. These will be used to track contracts for NFL players. I have used multiple formulas to do this. The problem is that I need to do this for 32 teams over 10 years. So what I want to do is be able to have a master sheet and then just have the other 32 sheets pull those formulas from the master but use the info on the individual teams sheet. I'll give you some basics.

The first year starts out where you type in a players position, name, contract length and his rating. here is an example of one of my formulas. The very basic first one

=if(D13

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved