I have already an existing formula to get only the amount from the previous cell. From a6 to a30 it contains the word "11/05/09 press release $100", so in b6-b30 this is the formula. =IF(ISNUMBER(SEARCH("press",A6)),RIGHT(A6,LEN(A6)-FIND("$",A6)),"") until b30
the problem is in b6:b30 the 100's were not a number you have to copy and paste to other cells using paste special then values then click the smart tag and convert as a number to get all the total from b6 until b30.
I have included a test sheet with notes to explain what I am trying to accomplish. With the current code all works fine if I enter the data manually in column G, but when I do copy and paste for the whole column G it does not work. Is there a way to have the totals in column K convert to value row by row only if I simply paste data in Column G?
When I drag my VLOOKUP formula down a column in Excel 2010, the return value copies the formula result from the original VLOOKUP formula result. For example, if the first VLOOKUP returns a value of 0.5, I expect to see 0.5 or 1 in the cell below that one. However, I get 0.5 which is not the expected result for the cell below.
When, I click the fx on the cells below, the expected return values appear in the formula result. After I click OK, the expected formula results updates and now appears in the cell.
I'm not sure what is causing this issue. My computer was updated recently from an old machine to a new one. I have never experienced this issue before.
I have a report which has a list of customers, each customer has 24 columns which represent the payment history over 24 months. If a payment has been made for that month the date and time (formatted correctly) will be populated in this cell.
Each customer has a product name attached to it so a product can appear several times. I need is a formula that shows the total payments recieved for a particular month for a particular product. For example.
I have managed to create the following flag which works a treat, it picks up a date an account was set up but looks at 1 column.
I created a simple auto numbering function whereby Cell A7 contained =Row()-6, and Cell A8 contained =(A7+1). I then shift, and pasted the contents of cell A8 until cell A600. My aim is to simply copy the increments of 1 - 600 into another column. However when i copy and paste i'm also copying the initial underlying formula ie: =( A?+1), Is there a way to copy the results, not the formula?
number for item detail level from category standpoint. For example, in the category sheet has total number per category and per month and in the item detail sheet has a list of item number with category. I want a formula to recognize which item belongs to which category then use the total number of category by month to multiply with % of total in column D from Item Detail Spreadsheet.
I know this is an easy one but I'm unsure why I can't easily modify a formula. The key event in this formula is "+190". Every time I change the value the formula no longer works. I've copied to another cell and the formula no longer works. My question is when you have a formula like this one if you have to modify how do you do it and keep the formula working.
In my attached spreadsheet example below, in the Rollup Data sheet, I have a formula (Cell: C17) that will give me the actual cost totals that has been invoiced on WBS Element (DWRRI-BW096-231) for a total of $35,004.81.
What I need the formula do is run a redundant check procedure on my new WBS Element (DWRRI-BW096-231) actual cost total formula in the Rollup Data sheet (Cell: C17) against/vs. what the SAP system provides in the raw SAP Excel export contained in the PTD-Actual Cost sheet for the WBS Element (DWRRI-BW096-231) actual cost total of $35,004.81 (Cell: F9) that's highlighted in the yellow row.
In the Rollup Data sheet (Cell: C18), I need this formula to perform a similar function the as the previous formula above it (Cell: C17), but it this formulas function (Cell: C18) would have a separate operation that would only look for and return the single/sole WBS Element (DWRRI-BW096-231) actual cost total contained in the PTD-Actual Cost sheet (Cell: F9).
In the Rollup Data sheet I could then compare my two WBS Element (DWRRI-BW096-231) actual costs totals, the first from the automated addition of all the individual matching WBS Element actual costs into an actual cost total (Cell: C17), the second (new formula I'm requesting) from the matching and return function of the single/sole WBS Element actual cost total (Cell: C18).
So, if the two separate WBS Element actual cost totals (Cells: C17 vs. C18) both equal $35,004.81, the formula in C17 is a success and has correctly identified and added all the actual costs contained in the PTD-Actual Cost sheet, but if the two separate WBS Element actual cost totals (Cells: C17 vs. C18) both do not equal $35,004.81, the formula in C17 failed for some reason and has not correctly identified and added all the required actual costs contained in the PTD-Actual Cost sheet.
How to Add Total $ Value Formula into an Existing SUMIFS Formula.xlsx
I have a s/s which is built on IF functions and references other sheets and I have used the s/s in the past without issue. However now I want to ammend the formula a little and excel will only display the formula itself, not the result of the formula. I have tried CTRL ~ to turn on/off the show formula function but this makes no difference.
My reason for changeing the current formula is that I need to turn a 2 (numeric) to 02 (which can be either numeric or text). This is the new formula.
I have a workbook consisting of 4 worksheets. Cell B5 in each of three of these sheets has the exact same formula (copy/pasted) referring to data in the other worksheet. In one of the three similar sheets cell B5 shows up as a blank. In the other two, this cell shows up as a zero. Since the formula in each of these cells is identical, I figured the difference in the way the result showed up was a matter of cell formatting.
The cell format for each of the three is indicated as ‘general’. However, with one of these, the ‘sample’ shown when you view the cell format shows as a blank while the other two show the ‘sample’ as a zero (0). How can I go about making all three cells appear the same, namely a blank?
I have a formula that returns a string using the concatenate function. Now I want to copy the string to another cell without copying the formula. The string will become a record in a CSV file. I cannot figure out how to make what shows on the screen a label cell instead of a formula cell.
Any way to convert a cell result into value if it meets the criteria or else the formula stays in place
I have same formulas from cell Q17 to Q1000 some of those cell will have different results based on manual inputs that occur daily.
I would like the formula result to convert to value only if greater than -1000 or else keep the formula in place to continue future calculations till it meets the criteria.
I have a value in Cell A1. Now, I need to be able to enter a number into Cell A3 and upon hitting Enter (or clicking elsewhere), the number I just entered into Cell A3 needs to be replaced with the number I just entered multiplied by the number in Cell A1. For Example: Cell A1 contains the number 1.05. I type 2.50 into Cell A3 and upon hitting Enter Cell A3 reads 2.625.
copying a formula. Basically i want to paste special a formula result automatically.
I have a if function set up so when 2 days corespond then in the 3rd cell it records the value, however when ever the date changes the value disappears, i can keep the value u there by paste special but i would love to set this up as an automatic thing once a value is recorded it records the value and deletes the formula, or the value doesnt change when the date (thus the condition) changes...
I have a formula in A1 that I would like to execute from A2. I want the A1 to display the formula (so no "="), but I would like cell A2 to execute the formula in A1.
If A1 contains: "SUM(1+2)", how can I get A2 to display "3" without reproducing the formula?
A1: SUM(1+2) A2: ????
I suppose I'm looking for something like this: A2: ==A1 But, of course, that doesn't work.
If I do this it gets close: A2: ="="&A1
But that returns "=SUM(1+2)" instead of executing the formula.
I'm working on an evaluating spreadsheet where I give for several items a rate of 1 to 3 and at the end it calculates an average rate. The average rate would range from 1 to 3 as well and their meaning is:
1 - poor 2 - average 3 - good
How can I work on the formula so when the result is equal 1, 2 or 3 it automatically gives in the cell right beside the related legend?
I have a spreadsheet containing 2 sheets. In cell A3 of sheet 1 I have a formula that generates either a blank or "1". In sheet 2 I have a macro called Index which I would like to run when the formula in A3 displays "1".
Having done some research I know that the worksheet change event does not work with formula changes so have tried the worksheet calculate function but to no avail. I have done a lot of searching but cannot find what the problem is.
I'm trying to use the sumproduct formula to query 3 columns: I want it to look in column E for either a "P" "C" or an "A", multiply the corresponding numbers in column D and F, and put the sumproduct total in cell C5, D5 and E5 for each formula below. The problem is that I keep getting #VALUE! result. It's because some cells in the range have #N/A in them, but I can't control that.
Here is my formula:
=SUMPRODUCT(--(E9:E70="P"),D9:D70,F9:F70)
=SUMPRODUCT(--(E9:E70="A"),D9:D70,F9:F70)
=SUMPRODUCT(--(E9:E70="C"),D9:D70,F9:F70)
How can I use this formula if for example cells D15-17 have no values or are #N/A?
The value in A1 can range from 0-10. If the value is 0 I need the result to be 0, if the value is 1-10 I need the result to be the number multiplied by 613.35 plus 29.35 for example =sum(1*613.35)+29.35 or =sum(2*613.5)+29.35.
I´m not sure if this is possible: if I have an array in a formula, for example ={A,23,1,O,6} is there a way that I can put "A,23,1,O,6" in the cell where the formula is? so that the result of the formula is a concatenation of the elements of the array?
I am setting up a spreadsheet that we can use with EditGrid online so we can post it in Forums. These will be used to track contracts for NFL players. I have used multiple formulas to do this. The problem is that I need to do this for 32 teams over 10 years. So what I want to do is be able to have a master sheet and then just have the other 32 sheets pull those formulas from the master but use the info on the individual teams sheet. I'll give you some basics.
The first year starts out where you type in a players position, name, contract length and his rating. here is an example of one of my formulas. The very basic first one
I'm having trouble with the attached example. An earlier member solved the odd-even problem, but I'd only like it to calculate if there is data in columns B to G.
I have a two different formulas the return a numbered result(PO Number) in the same column. I then vlookup both of them with the same formula into a pivot table, one returns the result one doesn't. format appears to be the same.
