Is there a function that gives the result of a formula is it was entered in another cell?
For example, if I have named an INDEX/MATCH function, is there a way to get the result of that function if it were entered in an adjacent cell?
I am having some issues with my conditional formatting code. I need 5 condtions, so I cannot use the built in Cond. Format. Column E is the average of cells F,G,H and when I update the numbers in F/G/H the background color is changed to the appropriate color, but column E does not change color!!! Example: The average (E) will start as a 90 and have a red background, then when the inputs(F/G/H) are changed and the average(E) now equals 30 but it is still shaded red! Is there anyway to have every cell updated, to make the cell change from Red to Green automatically??? Below is a copy of my code.
Private Sub Worksheet_Change(ByVal Target As Range)
Dim WatchRange As Range
Dim CellVal As Integer
If Target.Cells.Count > 1 Then Exit Sub
CellVal = Target
Set WatchRange = Range("E6:H15")
If Not Intersect(Target, WatchRange) Is Nothing Then
Select Case CellVal
Case Empty
Target.Interior.ColorIndex = xlColorIndexNone
Case 0 To 19
Target.Interior.ColorIndex = 8
Case 20 To 39 ..........................
I have a sheet that a VLOOKUP is looking at, and what I need is, if that VLOOKUP finds what it is looking for I need it to look at the cell 2 cells to the left, how is that done?
I am thinking something like:
Formula:
[Code] ......
I just don't know the offset part.
Is there a way I can sum the result of a formula on a range of cells that meet a criteria? For example, I need to sum the difference of only the cells that are >46. (a1-46)+(b1-46)+(c1-46)...+(g1-46).
In this case the result I'm looking for is on row 2:
Is this possible to calculate in 1 cell only (h1)?
A
B
C
D
E
F
G
H
1
44.2
48.6
47.5
0.0
42.3
44.6
49.5
??
2
2.6
1.5
3.5
7.6
The following code works perfect but the "change" event is only triggered when working directly on intersect range. Tried using the "calculation" event but could not figure it out. This is what I want:
1) To replace the code provided below using the calculation event
2) To only trigger the event for the row(s) where the new value was generated, not for the whole "For Each" statement
3) To use one single code for all worksheets, instead of copying the code in every working worksheet on the workbook, if feasible
4) And I would like a "second alternative", where the user of the workbook can click on a button and trigger the event on every row on the workbook that has a non empty cell within the intersect range, assuming that the intersect range column is the same for all worksheets
Private Sub Worksheet_Change(ByVal Target As Range)
Dim c As Range, d As Range, fc As Long, bc As Long, bf As Boolean
Set d = Intersect(Range("I:I"), Target)
If d Is Nothing Then Exit Sub
For Each c In d
Select Case UCase(c)
Case "C"
fc = 1: fb = True: bc = 4
Case "O"
fc = 2: fb = True: bc = 3
Case "D"
fc = 2: fb = True: bc = 46
Case "G"
fc = 2: fb = True: bc = 5..................
When I drag my VLOOKUP formula down a column in Excel 2010, the return value copies the formula result from the original VLOOKUP formula result. For example, if the first VLOOKUP returns a value of 0.5, I expect to see 0.5 or 1 in the cell below that one. However, I get 0.5 which is not the expected result for the cell below.
When, I click the fx on the cells below, the expected return values appear in the formula result. After I click OK, the expected formula results updates and now appears in the cell.
I'm not sure what is causing this issue. My computer was updated recently from an old machine to a new one. I have never experienced this issue before.
I created a simple auto numbering function whereby Cell A7 contained =Row()-6, and Cell A8 contained =(A7+1). I then shift, and pasted the contents of cell A8 until cell A600. My aim is to simply copy the increments of 1 - 600 into another column. However when i copy and paste i'm also copying the initial underlying formula ie: =( A?+1), Is there a way to copy the results, not the formula?
View 2 Replies View RelatedI am trying to write a formula where the column header of the row in which a value other than 0 exists, will display for each instance (row) where a value exists in an array spanning 3 columns. So the result cell could be any of the three column headers, or a combination thereof.
I started the formula in P2 of the GL Detail-2012 tab. File attached.
Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,))). Not working.
create a formula copying a formula from cell a5 to a20 but i want the result to be 1 cell lower from a5's result
View 6 Replies View RelatedI have a formula that looks at a cell on a front sheet, and then returns the contents of that cell as the result if it meets the criteria. So for example this formula would be in Cell A1 on Sheet2 IF(SHEET1!A1,"New",Sheet1!A1,"-")
This formula is always in the same cell (different sheet) as the cell that it is looking at, down 1500 rows. Instead of having the formula named for each cell is there anyway to ask excel to 'look at this cell but on this other sheet'.
e.g IF(Sheet1!"This Cell" etc). That way no matter what cell you put the formula in it is always referencing the correct cell for the formula?
I know this is an easy one but I'm unsure why I can't easily modify a formula. The key event in this formula is "+190". Every time I change the value the formula no longer works. I've copied to another cell and the formula no longer works. My question is when you have a formula like this one if you have to modify how do you do it and keep the formula working.
View 9 Replies View RelatedI have a s/s which is built on IF functions and references other sheets and I have used the s/s in the past without issue. However now I want to ammend the formula a little and excel will only display the formula itself, not the result of the formula. I have tried CTRL ~ to turn on/off the show formula function but this makes no difference.
My reason for changeing the current formula is that I need to turn a 2 (numeric) to 02 (which can be either numeric or text). This is the new formula.
=IF($A4="","",IF(VLOOKUP($A4,HCGTH1_DATA,22)=2,"02",VLOOKUP($a4,HCGTH1_DATA,22)))
Is there an issue with the formula or some setting in excel?
I have a workbook consisting of 4 worksheets. Cell B5 in each of three of these sheets has the exact same formula (copy/pasted) referring to data in the other worksheet. In one of the three similar sheets cell B5 shows up as a blank. In the other two, this cell shows up as a zero.
Since the formula in each of these cells is identical, I figured the difference in the way the result showed up was a matter of cell formatting.
The cell format for each of the three is indicated as ‘general’. However, with one of these, the ‘sample’ shown when you view the cell format shows as a blank while the other two show the ‘sample’ as a zero (0). How can I go about making all three cells appear the same, namely a blank?
I have already an existing formula to get only the amount from the previous cell. From a6 to a30 it contains the word "11/05/09 press release $100", so in b6-b30 this is the formula. =IF(ISNUMBER(SEARCH("press",A6)),RIGHT(A6,LEN(A6)-FIND("$",A6)),"") until b30
the problem is in b6:b30 the 100's were not a number you have to copy and paste to other cells using paste special then values then click the smart tag and convert as a number to get all the total from b6 until b30.
Is it possible to use the IF formula and if the result is true, to run another formula and if the result is false put a "0" in the cell???
Here is an example...
In cell A1, I have an amount of money.
In cell B1, I have a quantity.
In cell C1, I want to use the following IF formula:
=IF(B1>0;((A1)*(B1)*0.15);0)
At the present time, when I do this, when the result is true, I see ((A1)*(B1)*0.15) in the cell instead of what that formula should give.
Column B is basically 550 points + column C = Base Roll.
We need to introduce a cap so no more than 1000 points can be displayed/earned. So column G adds all points & column F caps.
So far it's all ok.
Now when i add a value to column E (points spent) those points are deducted from column G instead of the capped 1000.
Entering a value of 500 displays 800 in column F instead of 500.
I have a formula that returns a string using the concatenate function. Now I want to copy the string to another cell without copying the formula. The string will become a record in a CSV file. I cannot figure out how to make what shows on the screen a label cell instead of a formula cell.
View 3 Replies View RelatedHow do you write a code that will calculate a formula and output the result in a cell?
For example:
A1 = 1 (Named "Cell1")
A2 = 2 (Named "Cell2")
A3 = Results of macro for Cell1+Cell2 = 3
Is there a way to write it if I also want B3 = B1 + B2 and C3 = C1 + C2, etc.
Any way to convert a cell result into value if it meets the criteria or else the formula stays in place
I have same formulas from cell Q17 to Q1000 some of those cell will have different results based on manual inputs that occur daily.
I would like the formula result to convert to value only if greater than -1000 or else keep the formula in place to continue future calculations till it meets the criteria.
I have a value in Cell A1. Now, I need to be able to enter a number into Cell A3 and upon hitting Enter (or clicking elsewhere), the number I just entered into Cell A3 needs to be replaced with the number I just entered multiplied by the number in Cell A1. For Example: Cell A1 contains the number 1.05. I type 2.50 into Cell A3 and upon hitting Enter Cell A3 reads 2.625.
View 4 Replies View Relatedcopying a formula. Basically i want to paste special a formula result automatically.
I have a if function set up so when 2 days corespond then in the 3rd cell it records the value, however when ever the date changes the value disappears, i can keep the value u there by paste special but i would love to set this up as an automatic thing once a value is recorded it records the value and deletes the formula, or the value doesnt change when the date (thus the condition) changes...
I have a formula in A1 that I would like to execute from A2. I want the A1 to display the formula (so no "="), but I would like cell A2 to execute the formula in A1.
If A1 contains: "SUM(1+2)", how can I get A2 to display "3" without reproducing the formula?
A1: SUM(1+2)
A2: ????
I suppose I'm looking for something like this:
A2: ==A1
But, of course, that doesn't work.
If I do this it gets close:
A2: ="="&A1
But that returns "=SUM(1+2)" instead of executing the formula.
I'm working on an evaluating spreadsheet where I give for several items a rate of 1 to 3 and at the end it calculates an average rate. The average rate would range from 1 to 3 as well and their meaning is:
1 - poor
2 - average
3 - good
How can I work on the formula so when the result is equal 1, 2 or 3 it automatically gives in the cell right beside the related legend?
I have a spreadsheet containing 2 sheets. In cell A3 of sheet 1 I have a formula that generates either a blank or "1". In sheet 2 I have a macro called Index which I would like to run when the formula in A3 displays "1".
Having done some research I know that the worksheet change event does not work with formula changes so have tried the worksheet calculate function but to no avail. I have done a lot of searching but cannot find what the problem is.
i am trying to update the name of a worksheet with a formula but cant figure out how to do it.
the formula im using is
"=TEXT(MONTH(TODAY()),""00"")&""08""&TEXT(TODAY(),""YY"")"
basically it needs to return "mm08yy" and insert that as the worksheet name.
i can get it to work for a specific cell by using
Range("A1").FormulaR1C1 = _
but i cant use that when i have Sheet1.Name =
I'm trying to use the sumproduct formula to query 3 columns: I want it to look in column E for either a "P" "C" or an "A", multiply the corresponding numbers in column D and F, and put the sumproduct total in cell C5, D5 and E5 for each formula below. The problem is that I keep getting #VALUE! result. It's because some cells in the range have #N/A in them, but I can't control that.
Here is my formula:
=SUMPRODUCT(--(E9:E70="P"),D9:D70,F9:F70)
=SUMPRODUCT(--(E9:E70="A"),D9:D70,F9:F70)
=SUMPRODUCT(--(E9:E70="C"),D9:D70,F9:F70)
How can I use this formula if for example cells D15-17 have no values or are #N/A?
The value in A1 can range from 0-10. If the value is 0 I need the result to be 0, if the value is 1-10 I need the result to be the number multiplied by 613.35 plus 29.35 for example =sum(1*613.35)+29.35 or =sum(2*613.5)+29.35.
I´m not sure if this is possible: if I have an array in a formula, for example ={A,23,1,O,6} is there a way that I can put "A,23,1,O,6" in the cell where the formula is? so that the result of the formula is a concatenation of the elements of the array?
View 9 Replies View RelatedI am setting up a spreadsheet that we can use with EditGrid online so we can post it in Forums. These will be used to track contracts for NFL players. I have used multiple formulas to do this. The problem is that I need to do this for 32 teams over 10 years. So what I want to do is be able to have a master sheet and then just have the other 32 sheets pull those formulas from the master but use the info on the individual teams sheet. I'll give you some basics.
The first year starts out where you type in a players position, name, contract length and his rating. here is an example of one of my formulas. The very basic first one
=if(D13
I'm having trouble with the attached example. An earlier member solved the odd-even problem, but I'd only like it to calculate if there is data in columns B to G.
View 7 Replies View Related