Excel 2003.
I have been struggling for an hour how to hide a number to text macro in a way that only macro result is displayed in a cell.

(I have one 2-3 years old xls, where I have managed with task, but now can't figure out how and how to unhide the macro
Can it be password protected somehow?

I have a formula in A1 that I would like to execute from A2. I want the A1 to display the formula (so no "="), but I would like cell A2 to execute the formula in A1.

If A1 contains: "SUM(1+2)", how can I get A2 to display "3" without reproducing the formula?

A1: SUM(1+2) A2: ????

I suppose I'm looking for something like this: A2: ==A1 But, of course, that doesn't work.

If I do this it gets close: A2: ="="&A1

But that returns "=SUM(1+2)" instead of executing the formula.

I am using the below formula to find the latest date (column N) based on fund (column G) and Vendor (column O) reference. How can I find (column I) where the balance of that payment is? I know there are formulas like INDIRECT RC[-1] but how to add them to my formula.

Hopefully you will be able to help again. Is it possible to do a vlookup that references data on other tabs within the worksheet so that the result of the formula is in the cell not the formula.

So if my vlookup was =vlookup(a2,$a$1:$b$12,3,0) and the result was john smith i want just john smith in the cell. I know about copy and paste values but i was looking for a more automatic way. One that doesn't need intervention.

I have a quick question regarding this simple code thats been drviing me nuts. There x distinct pieces of Data in the range speciifed, but when i run this code, the reply posted in cell H1 is 1, instead of x.

Eventually the code will be built to check if the result is odd or even and then add an entry into the first blank cell if the result is odd.

I have Cell C63 in Worksheet 1 which is set up to say either "YES" or "NO" depending on whether a value on a different worksheet exceeds a value in an adjacent cell or not (also on that worksheet). The formula I am using is simply:

Essentially I don't want anything displayed if there are no data in the range C4:C54 on Worksheet 1. I thought I need a nested IF function but I couldn't get this to work.

I am trying to find a way to display text that is the product of a concatenate function in a defined cell, but not to have the function itself in that cell. Basically, I want to have the below function in cell A1. I want to add a command to it to take the result and display it in cell A2.

The reason for this is that I need the cell to be selectable (it is generating a file name that needs to be selected and copied), but I don't want the code behind it to be seen. I can't find a way to make the cell selectable AND hide the formula from being seen when the cell is selected. This is because our people keep copying the formula rather than the resulting text.

I was hoping for something like a DISPLAYIN(target) function, but it doesn't seem to exist.

I entered a simple formula in a cell =B14*B16 but it won't calculate. The cell only displays the formula and not the result. tell me what I did wrong. I've attached a sample.

I have an Excel workbook with multiple sheets. In one sheet, there are many columns that automatically get hidden based on cells values (=1) in another sheet as I type. I use this

Private Sub Worksheet_Change(ByVal Target As Range) If Target.Address = "$C$7" And Target.Value = 1 Then Sheets("Stakes").Range("E:E").EntireColumn.Hidden = True Else If Target.Address = "$C$7" And Target.Value <> 1 Then Sheets("Stakes").Range("E:E").EntireColumn.Hidden = False End If End If End Sub

Recently I had to change the second sheet that instead of manually entered values, formula results appear in cells. And the above code doesn't work anymore, columns are always stay unhidden. How can I achieve what I want? I need columns get hidden if formula results =1.

I have a s/s which is built on IF functions and references other sheets and I have used the s/s in the past without issue. However now I want to ammend the formula a little and excel will only display the formula itself, not the result of the formula. I have tried CTRL ~ to turn on/off the show formula function but this makes no difference.

My reason for changeing the current formula is that I need to turn a 2 (numeric) to 02 (which can be either numeric or text). This is the new formula.

I am trying to write a formula where the column header of the row in which a value other than 0 exists, will display for each instance (row) where a value exists in an array spanning 3 columns. So the result cell could be any of the three column headers, or a combination thereof.

I started the formula in P2 of the GL Detail-2012 tab. File attached.

Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,))). Not working.

I have a spreadsheet containing 2 sheets. In cell A3 of sheet 1 I have a formula that generates either a blank or "1". In sheet 2 I have a macro called Index which I would like to run when the formula in A3 displays "1".

Having done some research I know that the worksheet change event does not work with formula changes so have tried the worksheet calculate function but to no avail. I have done a lot of searching but cannot find what the problem is.

I have created a visual schedule for my team using Excel (2003, SP3 if that matters). Essentially, the user puts in pre determined 1-3 character codes in individual cells, and the macros I have act like a complex Conditional Formatting to keep the formatting neat and consistent throughout the sheet. The actual values are inputted directly into the cells though (this is pertinent to my question), and are things like "A" "M" "$" and "TR"

I have a sheet for every day in a week. Since there are multiple team members on any given day, I have recently made another sheet which pulls a single Team Member's schedule Sunday through Saturday and displays their schedule for the entire week. I have used formulas (specifically VLOOKUP) to do this.

The problem that I am having though, is that the macros that I made to format the days of the week sheets, do not seem to recognize the result of the formulas in the individual Team Member's sheet, and thus do not format them as desired.

My macros are written to evaluate a cell's value via [ Range("example").value ] and will act upon it accordingly with more code. I am assuming that a [ Range("example").value ] would see a cells value as the text of the inputted formula, and not the result of that formula. Is there any way around this? or do I need to avoid the formulas all together and write in code to just copy over what I need?

I am trying to implement a simple macro. Here is my Function Age(DOB) Age = Int((Now - DOB) / 365) End Function

Sub Macro1() Age (Selection) ActiveCell.Offset(0, 1).Select ****** End Sub

The function basically calculates the persons age using their date of birth. What I need to know is how to copy the result of the function into the cell next to the selected one. (The code above only selects the adjacent cell).

Am trying to get the sheetcalculate to be triggered and execute VBA code when a formula changes its result from positive to negative. The code works fine if I trigger it with a command button click. Auto Merged Post Until 24 Hrs Passes;

I currently have an excel file set up which is refreshing imported data every minute from a server. This data is located on " sheet 1".

This data is the result of another system constantly monitoring (pulling data from) the process at my factory. It consists of temperatures, speeds and other settings.

When a temperature, speed or setting changes then it will be captured by the monitoring system and therefore my excel sheet will load it into the imported data within the next minute.

I would like to be able to capture the change in temperature, for example, if it goes into alarm and automatically send an email reporting this alarm. This alarm is captured in my imported data in a specific column with a 1. If it is out of alarm it is 0. There will not be a report of an item, at any one time, with both a 0 or 1... so there is only one case of any one monitored process.

I have a pivot table set up to filter all the uneeded data out and I currently refresh it manually to show the current status of all alarms. If an alarm occurs on the process, I can refresh my pivot table and it will be indicated with a 1 until it is refreshed again (and the alarm is gone).

So the question:

1. How can I refresh the pivot table automatically every x seconds? 2. How can I automatically send an email on the value change from 0 to 1 in case of an alarm?

When I drag my VLOOKUP formula down a column in Excel 2010, the return value copies the formula result from the original VLOOKUP formula result. For example, if the first VLOOKUP returns a value of 0.5, I expect to see 0.5 or 1 in the cell below that one. However, I get 0.5 which is not the expected result for the cell below.

When, I click the fx on the cells below, the expected return values appear in the formula result. After I click OK, the expected formula results updates and now appears in the cell.

I'm not sure what is causing this issue. My computer was updated recently from an old machine to a new one. I have never experienced this issue before.

I've got results in row 3 - 16 386 and sometimes these results are exactly the same in some rows. What I now would need is row AB to display only one of each result and row AH to display how many percentages of the time this particular result appears.

I have a count for each site for certain cloumn headers. But i want to collate these so that if there is a 1 in the column the it will output it with the column header. But there are 10 column headers and I would like to get a result that has all the columns with 1 in.

eg: a b c d e f g h i j k l m n o p q (Organic Suites) (Inorganic Suites) sitea 1 0 1 0 1 1 0 1 0 1 1 1 0 0 0 0 (O1 O3 O5 O6 O8 OS) (I1 I2)

I created a simple auto numbering function whereby Cell A7 contained =Row()-6, and Cell A8 contained =(A7+1). I then shift, and pasted the contents of cell A8 until cell A600. My aim is to simply copy the increments of 1 - 600 into another column. However when i copy and paste i'm also copying the initial underlying formula ie: =( A?+1), Is there a way to copy the results, not the formula?

I am using an input box to enter the value of column D. After the value of column D is entered, I want a message box that displays the corresponding data in column A and B. with the vba coding?

creating a .Find code to search a range on a sheet and then display each result seperately in a msgbox. An inputbox will be the value .find searches the range for.

the msgbox needs to be a vbyesno

VB: 'SEARCH CODE Dim myItem As String, myRNG As Range, NewLoc As String Dim Found As Range [code].....

i have a routine which loops through a range looking for past dates and when it finds one display the result in a message box in my testbook i only use 25 rows but it gets annoying having to click ok for every find....is it possible to collect all results and display them in the message box at one time?

Private Sub Workbook_Open() Dim Mycell Dim Rng Set Rng = Sheets("Sheet1").Range("B1:B25") For Each Mycell In Rng If Mycell.Value < Date Then MsgBox Mycell.Offset(0, -1).Value & " Is Overdue By " & Date - Mycell.Value & " Days, Take Action Now!", vbOKOnly, "Tasks Overdue" End If Next Mycell End Sub

I would like to gray out or hide contents of a series or group of cells when a particular cell has a certain result. i.e. if cell A1 is <5 I want cell rows 5 thru 10 to be hidden or grayed out.