Macro To Create A Graph When Button Pressed?
Apr 16, 2014
I have a table of data which contains company names, the number of high risk policies, number of low risk policies, and the percentage of high risk policies (compared to total policies).
What I want to do is for people to be able to select up to six of these companies and press a button that says 'create graph' and it creates a graph which shows the number of high risk and low risk in a stacked bar, and the percentage on a separate axis as a line. I know how to manually create this graph no problem, but to be able to dynamically create one from selected companies would be awesome.
To start with I have created six drop downs where you can select the company name as I image the macro will need to know which companies' data to look for in the source table.
View 3 Replies
ADVERTISEMENT
Mar 7, 2014
If i want to make a macro button to run for a certain no. of time pressed, like for 100 times, then the button is disabled, how can this be done?
View 9 Replies
View Related
Nov 11, 2011
I have a togglebutton for an excel sheet in use for scoring psychological tests. When pressed, the button higlights the cells where a raw score is inserted.
What I need is a code to higlight the togglebutton when pressed, eg. green (colorindex 4). The button is white. How to do this?
Below is the code, It has more lines than needed, but it works.
Private Sub ToggleButton1_Click()
'FKV TOGGLE'
ActiveSheet.Unprotect "manisk"
If ToggleButton1 Then
[Code] ........
View 2 Replies
View Related
Mar 5, 2013
I'm trying to make it so that when I hit one button it unlocks the ability to hit two other buttons. I've been trying to do some OnEvent things but they just haven't been working for me.
Ideally I'd like it so that button B and C look like they shouldn't be pressed, perhaps translucent or grey, before button A is clicked, after that they should turn to another a specified colour.
View 7 Replies
View Related
May 24, 2007
i deleted the macros i was using . just looking to start over.
what i want is for the button to brign up the graph when clicked and hide the graph when clicked again.
being such a newbie to this i'm just fumbling in the dark. with a bic lighter. that my companios keep blowing out cause they think its funny.
Frustration, confusion, headacke
View 9 Replies
View Related
May 22, 2006
Private Sub ValidarCampos()
Dim r As Long
Dim c As Long
Dim s As Worksheet
'Set s = Active.Worksheet( Name)
Dim Error As String
' Dim ws As Worksheet
Dim ValorMensaje As Long
'Turn off Screen refresh
Application. ScreenUpdating = False
'Use Cells(Row, Column) for range adddress
r = ActiveCell.Row
c = ActiveCell.Column ..................................
How can I simultaneously with this code put data from textboxes to Active sheet and sheet "Izpisi". So when the button Add(dodaj) is pressed the data goes to active sheet and sheet ("Izpisi") at the same time
View 9 Replies
View Related
May 8, 2014
planning a useform to collect data. My thought is to have a command button 1 when pressed will increase textboxA by a value of 1+
View 6 Replies
View Related
Aug 26, 2013
I have made an excel workbook detailing team performance that all of my team have access to and that requires updating once a day. The first person to access the workbook each day presses a Command Button that updates the workbook and inserts a time/date stamp. However, other members of the team go into the workbook and update it again the same day which then affects the data being reported.
I know i should probably just sack them for not being able to read the time and date but HR would not like that so is there a way to disable CommandButton1 (ActiveX) so that once it is pressed it is disables until the next day?
View 3 Replies
View Related
Jan 10, 2014
Why I receive a 400 error when the 'excel close' button is pressed in the attached sample.
View 2 Replies
View Related
Mar 13, 2014
I have a situation with a spreadsheet i'm working on.
Basically, when a button is pressed I want it to search for all rows which have a "yes" in an offload column (Column AS, on the sheet "Active") (So it can be yes or no).
If it finds a yes, I need it to move the whole row in to a new sheet called "inactive", then move the remaining results up.
I have taken and played about with a different VBA code, but i'm not sure it's even the right line!
Here is what I have :
Sub Refresh() ByVal Target As Range)
If Target.Column = 45 Then
If UCase(Target.Value) = "Yes" Then
Target.EntireRow.Copy Destination:=Sheets("Inactive"). _
Range("A" & Rows.Count).End(xlUp).Offset(1)
Target.EntireRow.Delete
End If
End If
End Sub
View 9 Replies
View Related
Nov 10, 2008
I have created a button name "Add Power Source" on excel sheet that adds a table and a button(named "Add Row") to the sheet.Whenever the user clicks the "add power source" button a table and a "Add new row " button is created .This "Add new row" button is used to add rows to the table.
Now suppose the user has pressed the "add power source" button 5 times,so that there will be five table on sheet and each having a "add new row " button associated with it.When the user wants to add a new row to the table 2 say .How will I come to know in which table the rows are to be added using VBA.
View 9 Replies
View Related
Nov 10, 2008
I have a workbook with about 53 worksheets one for every week in the year. They are named as follows:
VA-1-1-09 TO VA 12-28-09 All sheets are hidden except the (VA-1-1-09)
What I am trying to do is create some logic that would keep all 52 sheets Very hidden except sheet VA-1-1-09 Till the second week starts at that time what I would like to see happen sheet VA-1-5-09 come out of very hidden and appear visible and send sheet VA-1-1-09 to just a hidden state. I like to have this happen for every week of the year? If this can happen automatically that would be great however a command button clicked once a week would do the trick as well.
View 4 Replies
View Related
May 2, 2014
I have a macro code that will create line graph referring the data given in defined column A1-C4,
Code with Static column range:-
ActiveSheet.Shapes.AddChart.Select
ActiveChart.SetSourceData Source:=Range("'Sheet2'!$A$1:$C$4")
ActiveChart.ChartType = xlLineStacked
I tried to modify the above code, so it will refer undefined/dynamic data column, but getting an error during execution "Run Time Error - 424:" "Object required"
Code with Dynamic column range:-
ActiveSheet.Shapes.AddChart.Select
ActiveChart.SetSourceData Source:=ActiveSheet.Range("a1", _
ActiveSheet.Range("a1").End(xlDown).End(xlToRight)).Select
ActiveChart.ChartType = xlLineStacked
View 1 Replies
View Related
Dec 28, 2011
I have the following code:
Code:
Sub AddFormsButton()
Dim sShape As Shape
With Range("J1")
Set sShape = Sheets("Exposure Country").Shapes.AddFormControl _
(Type:=xlButtonControl, Left:=.Left, Top:=.Top, Width:=96, Height:=20)
End With
[Code]...
Which is called within another macro and inserts a button onto sheet Exposure Country, after which the macro it was called from then stops (i.e. End Sub)
What I would like is that when the user clicks on this button it selects another sheet but I'm not sure how to achieve this.
View 5 Replies
View Related
Aug 10, 2014
Refer to attached file.
I have below code which successfully create a macro button and assign the macro correctly.
This is only doing for one sheet and i need to modify the code so that it does for all sheets of the workbook.
[Code] ....
Test Macro_Botton.xlsm‎
View 3 Replies
View Related
Oct 7, 2009
I have 2 tabs on my spreadsheet. The first has some text at the top in cells A1 and A2, and that's it. The second tab I need a script for. Basically, I need some sort of macro button and a text box. I want people to be able to type some text in a cell or box on the 2nd tab, hit a button, and the text that has just been typed will be copied and pasted in to the next available cell down on the first tab.
For example, say the 1st tab had 'title' written in cell A1, and 'hello' written in cell A2. If I were to go to the 2nd tab, type 'bonjour' in to a cell or text box, and hit a button, the text 'bonjour' would be copied, the script would read the 1st tab and see that cells A1 and A2 already had text in them, and so paste 'bonjour' in to cell A3.
View 2 Replies
View Related
Nov 11, 2012
All, I am trying to generate a print button that prints a specific range without using macros. Is it possible? Currently I am using Follow Hyperlink Sheet Event to print the desired range, this works fine but I want to completely lose the macros in spread sheet.
View 2 Replies
View Related
Jun 10, 2008
I am trying to make this code works by Toggle botten in Mymenu.
when i press the toggle bottun the copy takes place, then move the curser to distenation and press the Toggle again to past only the comment.
How to make the Toggle bottun inside Mymenu (A menu in the Worsheet Menu Bar).
Sub Macro1()
' Selection.Copy
Selection.PasteSpecial Paste:=xlPasteComments, Operation:=xlNone, _
SkipBlanks:=False, Transpose:=False
Application.CutCopyMode = False
End Sub
View 4 Replies
View Related
Mar 26, 2009
I want to have a small button at the top of the sheet that when pressed, will automatically reset all filtered autofilters back to show all.
View 9 Replies
View Related
Aug 6, 2007
Is there a VBA code that will enable me to create a button and assign a certain macro to it everytime I insert a new worksheet?
how to insert a new worksheet with VBA, what I want is that when I insert that worksheet, there is already a button there with a specific macro(already made) assigned to it.
View 3 Replies
View Related
Dec 4, 2009
I'm trying to get a macro to run in my worksheet anytime someone presses the Enter key. I've been trying to use Private Sub Worksheet_Change(ByVal Target As Range) and getting extremely frustrated. I’ve tried a bunch of things and nothing seems to work. This is my latest that doesn’t work.
View 5 Replies
View Related
Apr 10, 2012
I would like to detect when the user uses the "DELETE" key and would like to run a macro at the same time.
how to detect it and run a macro in VBA.
View 6 Replies
View Related
Apr 1, 2009
I have Sheet2 containing Supplier data in 2 columns - SupplierTAxCode and SupplierName (unsorted)
Sheet1 contains the Expenses section.
In Sheet1, column E6 to E1000, after inputting each SupplierTAxCode and pressing the RIGHT ARROW key, I would like to automatically get the SupplierName in column F6 to F1000 - from the corresponding data in Sheet2
In the event that the input in any of the cells in E6 to E1000 does not exist in SupplierTAxCode in Sheet2, would it be possible at the same time, to change the background color of the adjacent cell (SupplierName) in column F6 to F1000 at the same time - as a reminder to add those to the Supplier data in Sheet2 at a later date.
I could use Index Match and Conditional Formatting, but am concerned about the file sizes.
View 9 Replies
View Related
Apr 25, 2014
I have a row that contains each date for the year in B5:NB5. I would like to have a button or macro that will jump to the cell containing today's date.
View 4 Replies
View Related
Mar 4, 2014
I need to be able to run a macro called "Daily_Fuel_Line_Save2" when the enter key is pressed in any cell in the range A10:F10, but I still need to be able to use the tab key between the individual cells and change values in this range before starting the macro.
I already have the following code on the sheet which I would also like to keep.
[Code] .....
View 2 Replies
View Related
Oct 9, 2009
how to make a code so that it captures the event of pressing any key of the keyboard and triggers a macro.
I tried using OnKey method but the problem with this is I am getting stick to any particular button whichever i specify in the onkey method wheareas I want to keep it general for any button in the keyboard.
Also if anyone can suggest how can I use OnKey method to use the "S" key to launch a macro.
View 9 Replies
View Related
Mar 9, 2013
i want to create a save button in sheet 1, on clicking the same the data entered in the particluar cells of sheet 1 should get saved in sheet 2 in given format
View 1 Replies
View Related
Jan 14, 2009
So I've got Sheet 1 with say
____A___B___C
1___m___i___c
2___r___o___s
3___o___f___t
I would like to create a button that can create a new sheet and paste A1 to C3 at the same location on the new sheet
and I need this to create a new sheet and do that everytime the button is pressed.....
View 11 Replies
View Related
Sep 28, 2004
Trying to create an N1.85 graph in Excel that has irregular spaced tick marks on the X-axis. Found the following information but no luck with it. Need US measure for this semi-log (10 X N1.85) graph. Also called a semi-expo (Q1.85) graph.
The resulting graph appears to be a log graph in reverse with one scale; the column widths are smaller at the left and become larger as they progress to the right.
Info found:
A 1.85 graph can be constructed manually by establishing a series of 15 values (in the case of the example in D5.2.1) from a base measurement to the exponent of 1.85.
Step 1
Select a base measurement for the desired size of the graph. A base measurement of 1.0 mm will produce a graph to 15 which is approximately 150 mm wide; a base measurement of 1.5 mm will produce a graph approximately 300 mm wide. In the case of a 1 mm base measurement, the x-axis numbers will be the 1-15 series. In the case of a base of 1.5 mm, the numbers will be represented by the series: 1.5, 3.0, 4.5, 6.0 etc. for 15 values.
Step 2
Construct a series of columns to the 1.85 exponent values measured from the zero point. The rows representing the pressure values are linear.
NOTE - A good approximation of the above can be computer-generated by a spreadsheet programme by entering a column width established from the exponential figures by subtracting the preceding value in each case. The column dimensions are displayed in the number of standard characters able to be accommodated in the column width which is slightly inaccurate in linear dimension.
The figures below indicate the values for a graph based on 1.0 mm.
Linear scale Exponential value of linear values = Column width = linear values to 1.85 power exponential value - preceding value
1 1 1
2 3.61 2.61
3 7.63 4.03
4 13.00 5.36
5 19.64 6.64
[Code]....
View 6 Replies
View Related
Oct 14, 2008
I want to create excel graph using VBA and found difficulties on chart name set to default.
the script is like this :
ActiveSheet.ChartObjects("Chart 31").Activate
Can I set my own name of the chart instead of "Chart 31" (excel default) ?
View 9 Replies
View Related
