Transpose Multi-Column Groups/Repeats Based On 1 Column
Mar 19, 2009
I have a sheet with 3,000 rows and only two columns. Column "A" consists of 20 to 30 different names, column "B" consists of 50 to 60 different products. I need to be able to evalute the value in column A and copy, paste special transpose all values in Column B that have the same value in column A. As an example if cells A1 through A5 is "Arizona" and cell B1 is Broccoli, B2 is Cauliflower, B3 is Apples, B4 is Oranges, and B5 is Bananas, I want to copy B1 through B5 and paste special transpose to cell C1.
This then would need to loop all the way to the bottom of the data in Column A looking for a change in value. The attached file called Sample Data has two tabs. The one titled "report" shows the raw data, the one titled "Final" shows how I would like the results to appear (column L)
View 6 Replies
ADVERTISEMENT
Jul 1, 2008
I have a data set in an Excel spreadsheet entered as one column of data. It is names with addresses, phone numbers, job title, etc. I want to select and transpose each person in the list so when I am done the person's name is in column A, Company name in column B and so on. The problem is the information listed is not the same for each person - so there is a different number of rows for each person. The names are in bold text though, so I need to select from one cell with bold text to the row BEFORE the next row with bold text and transpose the data for each selection. I found this forum by finding an old question here that is similar at Copy based on Bold Paste-transpose provided in that post and it produced no result.
View 4 Replies
View Related
Jul 9, 2009
I need to transpose a three column worksheet with thousands of rows containing repeats based on the value in Column A (between 2 and 11 consecutive repeats), into rows with no repeats, and the values from the repeated rows into new columns. Column A has a unique numeric value corresponding to the repeated rows. Column B has 1 of 11 values and Column C has 1 of 4 values.
The worksheet looks like this:
1 abc x
1 def y
2 ghi x
2 abc n
2 lmn x
2 def z
2 jkl y
I need to make it look like this:
1 abc x def y
2 ghi x abc n lmn x def z jkl y
I tried using the following code, but it dropped all the values from column C:
Sub kTest()
Dim a, i As Long, w(), k(), n As Long
Dim dic As Object, ws As Worksheet, s As String
Set dic = CreateObject("scripting.dictionary")
dic.comparemode = vbTextCompare
With Sheets("sheet1")
a = . Range("a2:b" & .Range("a" & Rows.Count).End(xlUp).Row)
End With
I am attaching a workbook " Book 1" that has the results from the above macro in the first worksheet "Final Report", the origninal data "orig data", and the format I need to get the data into "needed data".
View 5 Replies
View Related
Apr 10, 2008
I have a workbook that lists system analysts and information on the systems they're responsible for. I would like to have an Excel macro that will:
1. Create and name a new worksheet for each UNIQUE value in the 'Name' column (new worksheet for each analyst)
2. Copy their system info to each respective worksheet
I've attached a sample workbook.
View 2 Replies
View Related
Nov 3, 2009
I have a spreadsheet with the following columns
No Of Transactions
Total Revenue
LID
OURSUB
SubCount
Name
Phone
Phone2
Email
Phone3
Phone4
Phone5
Phone6
Phone7
Broker
Bcode
There are 28,000 records in the spreadsheet.
The column LID contains the ID of the client. Each client can have transactions in multiple subs ("oursub" column). The spreadsheet is sorted by the LID column.
What I need is for the "oursubs" values to be transposed column headings for each unique LID. E.g. if "LID" 12345 has 50 records with 25 different "oursubs". I want one row with LID "12345" and 25 columns with the names of the 25 "oursubs".
I am attaching two sample spreadsheets. The spreadsheet "LID_Source.xls" contains sample source data and the spreadsheet "LID_result" shows the result that I want.
View 9 Replies
View Related
Feb 15, 2010
In the attached workbook I'm trying to populate Column E with sequential numbers (as shown) based upon a changing range (defined as a named range called 'range'). Is it possible to write a formula in the cells in Column E that will do this?
View 2 Replies
View Related
May 6, 2008
This is my first post but I have been using Ozgrid for awhile now. I am farily good with excel formulas but have just started with macros so bear with me if i dont understand what you mean at first.
I am looking for a way to copy rows our of sheet2 in the attached sheet based on the value in the segments column in sheet 2. The rows need to be paste into sheet3 (already has heading set up). The segments value is the number of times i need each row copied into the next sheet. The purpose of this is to split random length samples into 10cm incriments for study. For example, a 1.5m sample is taken so there should be 15 segments of 10cm each copied into sheet3.
Also, if possible, it would be nice for it to display the actual length of the segment after copied into sheet3 for cases where the length was not evenly divisible by 10. I have found several examples of row copying macros, but none that will copy a conditional number of hte same row based on a cell value. In the original data there are close to 4000 rows, but the number of rows will vary depending on the data source.
Another thought I had was if the total number of available rows is going to be exceded would it be possible to have the rows pasted into different sheets based on the rock type listed in the column?
View 9 Replies
View Related
Dec 18, 2008
I'm looking for a formula (VBA I'm assuming) that will help me create a unique customer ID out of data that my website generates in order to import records into my accounting system.
I have a current list of customers in CSV format with the columns: CustomerID, CustomerName, CustomerZip
Each customer in our accounting system is assigned a unique,7 digit CustomerID in the format of XXX#### where XXX are the first 3 letters of their last name, and #### is a 4 digit number (with leading 0's) to create unique ID's for customer with the same first 3 characters of their last name. SAMPLE LIST:
SCH0001, Lindsey Schubert, 75230
SCH0002, Thomas Schoembs, 53132
ADA0001, Samantha Adams, 28205
...
What I'd like to do is pass the formula 3 parameters (Cust_First_Name, Cust_Last_Name, Zip) and have it parse the .CSV file and either return an existing customer's current ID or generate the appropriate new, unique ID, making sure in increase the 4 digit # accordingly and insert leading 0's if necessary.
Another caveat, if possible to work with, is the ability to also pass the formula another range of cells to append to the end of the .CSV file's data for comparison reasons. There are times when I'll bulk-import orders (or we receive numerous in the same batch) and the potential exists to have two customers that would have the same CustomerID created using JUST the .CSV data. Ie. If we use the example above and have new customers of Steve Schwab and Julie Schwitzer - we'd end up incorrectly assigning them both SCH0003, where if we'd read Steve Schwab's newly created info and customer ID of SCH0003, then Schwitzer would correctly be assigned SCH0004.
View 3 Replies
View Related
Dec 30, 2008
I have a large worksheet that lists employees and the hours they work each day in a pay period.
For Example:
Column A holds a date and Column E holds the number of hours worked for a paytype. So i want to create some function that sums the numbers in column E, but only those where column A holds a date.
Then i want to return that number to a cell, say C20. I think I've managed to tell the macro which rows i want to return values from, but I can't figure out how to say "add these numbers together and put the total in C20."
I'll check this frequently if clarification is needed.
View 9 Replies
View Related
Aug 27, 2010
I was wondering if there was an array formula or some VBA code which can transpose/repeat values based on a count. Below is an example of what I mean:
Name Count Output Tod 4 Tod Bill 3 Tod Sue 5 Tod
Tod
Bill
Bill
Bill
Sue
Sue
Sue
Sue
Sue
View 6 Replies
View Related
Jul 1, 2008
i have a unique transposing situation and i need a script to transpose my data. i haven't encountered anything like this yet so i wonder if its possible
my data is currently in this format:
Object1, Property1, Value
Object1, Property2, Value
Object2, Property1, Value
Object2, Property2, Value
i'd like to transpose it to:
........... Property1 Property2
Object1 Value Value
Object2 Value Value
View 9 Replies
View Related
Mar 20, 2012
I have attached my Excel File with the userform I am trying to do. What I am trying to do is change the table in the listbox based on the selection of the combobox and then my selection in the listbox will pass the selected values to Range A1:C1.
Excel 1.xls
View 9 Replies
View Related
Feb 27, 2014
In my worksheet Column Y contains multiple duplicates and Column Z contains values associated with each duplicate. I want to check every row in Column Y for multiple duplicates then find the difference between their associated Column Z values.
View 1 Replies
View Related
Aug 22, 2008
I want to delete the repeats in one column. for example:
2 Drawer Chest-MOD1 725
2 Drawer Chest-MOD1 7252 Drawer Chest-MOD1 7252 Drawer Chest-MOD1 725Tall Open Shelf Unit-MOD1Tall Open Shelf Unit-MOD1Tall Open Shelf Unit-MOD1Tall Open Shelf Unit-MOD12 Drawer Chest-MOD1 7252 Drawer Chest-MOD1 7252 Drawer Chest-MOD1 7252 Drawer Chest-MOD1 725
I would like this to look like:
2 Drawer Chest-MOD1 725
Tall Open Shelf Unit-MOD12 Drawer Chest-MOD1 725
View 9 Replies
View Related
Jun 30, 2014
I have a listbox with 8 columns. Multiselect is enabled, and it must stay this way. As part of my program, after the user presses a command button, I need to use the row indexes of the selected rows in order to copy the selected information into an array which is then placed in a different listbox, and then delete the items from the original list. Pseudocode of what I want to do:
[Code] .....
But my understanding is that .ListIndex does not work this way with multiselect listboxes. I've tried searching for a solution for a while, but I cannot find one.
View 5 Replies
View Related
Jul 30, 2012
I have row of data from cell A2:E2 to A5000:G5000
in Column B I have customer account number, and they should not repeat but some reason some customers repeat more than once,
so out all column A B C D E if there if customer repeats only thing can be same is customer account number
so for example below, account number 12 repeats so I want to only few all account number 12 so I can compare both row and delete the only i need to delete and go back to original
DATE
ACCOUNT#
FIRST_IN
LAST_IN
SOMEVALUE
1/22/2012
12
A
B
2321
[code].....
View 4 Replies
View Related
Oct 3, 2013
I attempting to create a formula that will create random numbers in a column without repeats. For example, I have a spreadsheet with two columns. The first column I want to contain the random numbers and the second column will contain names. I just need the formula to create the random numbers once.
View 2 Replies
View Related
Mar 7, 2014
I'm trying to come up with a single formula to create a single column list from a table with blanks.
a
b
c
d
e
f
g
To
a
b
c
d
e
f
g
I know I've done this before but having trouble visualizing today.
View 14 Replies
View Related
Jul 22, 2014
I would like to display the column header of the row in which a value other than 0 exists in a cell for each instance that value exists in an array spanning 3 columns. So the result cell could be any of the three column headers.
I started the formula in P2 of the GL Detail-2012 tab. (FILE TOO BIG)
Excerpt:
Resin Sand Eliminated Segment
- (12,896.65)-
- (6,570.85) -
- (11,503.80) -
- (13,188.50) -
If there is any value other than 0 in Resin, Sand or Eliminated columns, return that column's header under Segment.
Here is what I started: =INDEX($M$1:$O$1,SUMPRODUCT(COUNTIF($M$2:$O$67756,)))
View 2 Replies
View Related
Aug 2, 2012
a macro to convert this;
a
b
c
d
[Code]...
Into this;
x
a
9
x
b
[Code]...
So far I have the following, but this is not quite right!
[QUOTE][Sub ConvertRange()
Dim targetRowNumber As Long
targetRowNumber = Selection.Rows(Selection.Rows.Count).Row + 2
Dim col1 As Variant
[Code]...
/QUOTE]#
View 7 Replies
View Related
Dec 27, 2011
My balance column is formulated for 60 rows. I am currently on row 23. The balance is repeated down the entire sheet range I have set. How do I keep the balance from showing next to an empty row without losing the formula?
View 1 Replies
View Related
Mar 2, 2011
I have an excel spread sheet with several rows of 265 (9A-IV) columns each with a heading. I would like to transpose the worksheet columns so that the heading is placed in Column A against the corresponding that is placed in column B. For example
ABCD14692571038Transpose to A1A2A3B4B5C6C7C8D9D10
View 7 Replies
View Related
Jul 16, 2013
Let's say I have one column of;
1
2
3
4
5
6
7
8
9
What is the most efficient way to change this into '3-columns & multi-rows' like this?:
1 2 3
4 5 6
7 8 9
The actual list is a lot longer and numbers are not in order.
View 7 Replies
View Related
Aug 24, 2008
I am trying to create a macro that converts a large list of Customer details from a vertical to horizontal format.
Each Customer has a unique sequential number running from 1 but the details are not always the same (e.g. in the below Phone does not always appear).
Current format is per the below:
Before
Column A Column B
Customer1
Address ABC
Phone 1234
Customer2
Amount 25
Address XYZ
Customer3
Amount 500
Address PQRS
Phone 567
Format afterwards should be
Customer AmountAddress 1Phone
1 ABC 1234
2 25 XYZ
3 500PQRS 567
View 4 Replies
View Related
Apr 8, 2008
I have a contiguous multi column, multi row numeric range that I want to copy (and sort in ascending order) into a single column on another sheet in the same workbook. What VBA code could achieve this, or alternatively can this be achieve via formulas?
View 3 Replies
View Related
Aug 13, 2014
I have a file that I need to do a text to column separated by comma and then transpose results to a single column. See exaple below
File
AreaZone
0886518
1801315
1801413
1801524, 25
1804214, 16, 18
Results:
AreaZone
0886518
1801315
1801413
1801524
1801525
1804214
1804216
1804218
View 8 Replies
View Related
Sep 14, 2009
1) I need to transpose about 2000 rows of 1 to 7 columns (A to G) of text/letter combinations of 1 to 5 characters into one column, each row under a group name (groups have one to three rows, so there's about 900 groups). The group name is in a row by itself, members are in the 1, 2, or 3 rows right underneath it. 2) Then I need to number the groups. There are no absolute common letter or number combinations within a group, so I can't use the first, mid, or last 2 or 3 characters to signify a common group. I do know how to use the copy and transpose feature, but would like to automate, if possible since there's so many. And automate the numbering task as well.
An example of the data is:
ABEGF
AMMBG AMNBG ANBG1 ANBG2 BEFGL BEFG1 BEFG2
FG1 FG2 GH1 GH2 GH3
View 9 Replies
View Related
Dec 13, 2008
I have work sheet, ("Sheet1"), there are about 17000 plus entries in two columns A and B,. In Column C, following formula is inserted to show the "number of occurrences" of a Group in Column A.
=IF(ISBLANK(F4),"", IF(COUNTIF($F$2:$F$118,F4)=1, "", COUNTIF($F$2:$F$118,F4) & " occurances"))
Mine active worksheet is Sheet2. In Column A, an entry is made and Column B fetches the equivalent entry from Column Sheet1:B. The formula is :
=IF(ISNUMBER(MATCH(A1, Sheet1!$A:$A,0)), INDEX(Sheet1!$A:$C, MATCH(A1, Sheet1!$A:$A, 0), 2),
IF(ISNUMBER(MATCH(A1, Sheet1!$B:$B, 0)), INDEX(Sheet1!$A:$C, MATCH(A1, Sheet1!$B:$B, 0), 1),""))
When an entry will be made in Column A of Sheet 2, naturally it brings the equal of Column B. What I will like that in the subsequent columns, C,D,E,F,G,H, etc. the values may be reflected for all the occurences equal to entered in A1. For example if in Sheet 1, :
1234 xyzxyz
1234 bxyxdx
1234 ffffffff
1234 ggggg
So these are four occurences. in Sheet2, when one entry of 1234 will be made it will show any of the four values, the rest three values may be reflected in subsequent columns.
View 7 Replies
View Related
Jan 13, 2010
way to transpose groups of data where each group is a different size. To clarify, my data looks like this (all one column):
data 1
data 2
data 3
data 4
data 5
data 6
data 7
data 8
data 9
data 10
and I would like to get it to look like
data 1 data 2 data 3
data 4 data 5
data 6
data 7 data 8 data 9 data 10
That is, to transpose each group of rows before a space.
View 9 Replies
View Related
Oct 22, 2007
I have a workbook with data in it that I want to copy and put in another wookbook. The data looks like this.
D11/22'2005
CX
T-7.80
PEl Azabache
LDining Out
(blank cell)
D11/22'2005
CX
T-9.50
PAce Hardware
LHousehold
(blank cell)
What I want is a macro to copy that data until it finds a blank cell and paste/transpose that data in another workbook and then get the next set of data until an other blank cell.
It should look like this when done.
D11/22'2005CXT-7.80PEl AzabacheLDining Out
D11/22'2005CXT-9.50PAce HardwareLHousehold
View 7 Replies
View Related
