programming in VBA as compared to python, java, and c++. My question is relatively simple. I have a listbox that I want to populate. I've figured out how to populate it using the ListFillRange, but can't figure how to populate so that I have a list of items, but doubles or repeats don't show up. I have a list of 1's, 2's, 3's, and 4's and I only want 1, 2,3,4 showing up as well as any additional numbers added to the list.
View 9 RepliesI haven't figured out a way to do this, but my goal is to (ideally) use a "IF" statement that will recognize the 1st "2" on the list and ignore the repeats
To better explain what i mean by this, attached to this post is a Excel file which clearly describes what I'm looking for
I am trying to create a schedule that will randomly populate with names from a list. I have learned how to do this with numbers. How can I do this with a list of names? How can I make sure that no names repeat?
In one column, I used =RAND()
In the cells where my numbers display, I used =INDEX(ROW($A$1:$A$24),RANK(Z17,$Z$1:$Z$24))
I have a workbook that has a userform with some simple code to translate formulas from .FormulaLocal to .Formula, and back.
I use that workbook a lot to translate formulas I find on here to something my German XL2007 will understand. I thought it would be neat, as well as giving me the opportunity to learn something new, to have that functionality as an add-in, rather than having the workbook open all the time. It is easy enough to save the wb as an add-in, and I can see it in my add-in list, install or un-install it. What i can't figure out is how to put a button on the xl07 ribbon when the add in is installed so i can access it.
I am getting repeats when there should not be any. Here are the formulas and
below is a portion of the worksheet. You can see hhow the Section and Work
Order are repeating. It should only show a one time entry....
I have the following figures in my spreadsheet and I have been trying to use SUMIFS. However, I don't want to count values in a continuous way, rather than that, I need to count the values ONLY until the number that is being counted repeats.
Example: Spreadsheet from Column Q1 to Column Q6:
Q1 Controlling
Q2 8
Q3 8
Q4 8
Q5 8
Q6 8
On this case, the Excel would count the number 8 five times in this array. However, If there were more number just below the number 8, it would count them as well and that's not what I am looking for.
Q1 Controlling
Q2 8
Q3 8
Q4 8
Q5 8
Q6 8
Q7 5
Q7 8
What do I need is not to count them when the number being counted has stopped to appear eventhough it can be found at Q7.
For my needs the answer should be that the number 8 was counted 5 five times rather than 6.
I have two sheets for club membership, one for recording payments another for the members list. Each membership is valid for a year, they either become a member or renew. I have for example:
Payments
Aaron Adams Member
Barry Burns Renewed
Charlie Clegg Renewed
Membership
Barry Burns Renewed
Charlie Clegg Renewed
I want it to copy the new member to the membership sheet but not any existing members.
example attached: If data repeats in column A, then add those corresponding values in column B. Can this be done without VBA?
View 5 Replies View RelatedIn my worksheet Column Y contains multiple duplicates and Column Z contains values associated with each duplicate. I want to check every row in Column Y for multiple duplicates then find the difference between their associated Column Z values.
View 1 Replies View RelatedI want to delete the repeats in one column. for example:
2 Drawer Chest-MOD1 725
2 Drawer Chest-MOD1 7252 Drawer Chest-MOD1 7252 Drawer Chest-MOD1 725Tall Open Shelf Unit-MOD1Tall Open Shelf Unit-MOD1Tall Open Shelf Unit-MOD1Tall Open Shelf Unit-MOD12 Drawer Chest-MOD1 7252 Drawer Chest-MOD1 7252 Drawer Chest-MOD1 7252 Drawer Chest-MOD1 725
I would like this to look like:
2 Drawer Chest-MOD1 725
Tall Open Shelf Unit-MOD12 Drawer Chest-MOD1 725
I have four columns of numbers that range between 1 through 44 and span 100 rows. Each row shows a unique combination as shown below:
Row 1 - 07 18 11 09
Row 2 - 03 29 08 05
Row 3 - 01 20 11 44
Row 4 - 09 17 14 24
Row 5 - 18 11 20 26
etc...
Can anyone give me some tips on creating a VBA script that will scan a hundred rows of the data shown above and identify for me the rows where number pairs and number triples repeat? For example the data above shows that the pairs "18 , 11" repeat on Row 5 and Row 1. Can EXCEL perform such a task with the right VBA script or forumula? Is a VBA script necessary or will using an ARRAY be the correct way?
I want to fill a list box with a range from the active worksheet. I want the user to be able to mulit select names and these then be transferred to another worksheet to capture training. I'm getting runtime error 381.
View 9 Replies View RelatedI have a macro I'm working on and am requesting your help.
In my filtered data, I have an empty column. For each cell in that column, I'd like to insert text, based on the results of the filter criteria.
I am using VBA only, modifying a huge .txt file into a .xls file. The ranges are dynamic.
I am successful in my results, aside from this issue.
How to fill or copy contents of
View 4 Replies View RelatedI made custom menu with these instructions: [URL]....
Problem is that when I right click my makro keeps copying itself. Ten times right click=ten my macro in the right click menu. It means that
Private Sub Workbook_Deactivate() doesn't work as it should be?
Cell 1 has 1,2,3,4,5
Cell 2 has 2,4,5,7,9
While combing them into one cell, there will be no repeat of the same number. So the outcome would be
1,2,3,4,5,7,9
The main point here is to merge the two cells together and eliminate the repeated numbers and sorting the numbers in a cell. Or if anyone knows series of steps not just one function to get to this.
I have a sheet with 12k plus lines of data... Attached is a sample.
I am trying to sort by any one of the column headings, without losing the order of the ADDRESS field.. Sometimes there are 2 lines, sometimes there are 3 lines of ADDRESS... Also, the first column, "DBA" has 2 lines sometimes 3 lines per entry... When I try to sort, it tells me I have to unmerge the cells.. but then when i sort, it alphebetizes everything seperatley so the addresses get splut up...
I'm trying to write a code that will generate random numbers and no number appears more than onece.
For I = 0 To 3
For J = 0 To I
Do
n = Int(4 * Rnd) + 1 'random number generated
Array1(I) = n 'random number settled in an array
If (I = I - J) Then 'checking for the same place in array
numsOK = True
Else
If Array1(I) = Array1(I - J) Then ' comparing two different places in an array
numsOK = False
Else
numsOK = True
End If
End If
Loop Until numsOK = True
Next J
Next I
I need to populate a range of cells with names from a list on another sheet based on the contents of another cell.
In the attached example;
on sheet 2 cell E3 has a number in it that corresponds to a number in column D on sheet 1, I want to use that as the reference to fill in cell E4 on sheet 2 with the value in column A on sheet 1, then I need to populate the YELLOW cells on sheet 2 with the names from sheet 1 column C that also match the values in sheet 2 cell E3.
The attached file has an example. I have been trying to use LOOKUP and VLOOKUP but can't get it to work.
Can someone please take a look at this for me?
I'm trying to fill a list with some hard values. When I use the macro recorder it adds formula="choice 1;choice 2; etc", these are all separate values in the list. However if I use this within a macro I only have one option with all three values combined.
View 4 Replies View RelatedI am using the method below to fill a list or combo box. It works but is slow when there are to many entries.
Is there a more elegant way to do this? I heard there was a method using the Excel filter function that makes the whole procedure below not necessary....
is there a way to take a drop down list and pick 1 then have excel fill in the info i seven cell example if list box is 3 then cell 1-7 = 1 and is list box is 1 cell 1=1 cell 2-0 cell 3 = 0 cell 4-7 = 1
View 9 Replies View Relatedat present i have data in column A That could look like
a1 = fred
a2 to a6 is blank
a7 =bill
a8 is blank
a9 = steve
a10 to a 20 is blank
what the idea is that a1 get copied to a2,a3,a4,a5,a6
a7 get copied to a8
a9 get copied to a10 to a20
these cells could vary on what information is in them and what cells contain information or not
my macro goes to a1 looks for the last cell with data in it then copies itto the cell below then loops back to a1 ans repeats itself
this macro takes about 1 minute to run as the column has about 5000 cells being used. is there a faster way to do this
I am trying to set the controlscource property for a listbox but i get a "Invalid Property Value" error. I am useing the
ActiveWorkbook. Names.Add Name:="Amm_Edit", RefersToR1C1:="=Developments!R" & (Rynommer + 4) & "C" & Kolomnommer & ":R" & (Rynommer + 33) & "C" & Kolomnommer
ListBox0.ControlSource = "Amm_Edit"
The first line definetly works but the second gives me the error. Why is this?
I want the user to be able to edit some of the data I have in excel. It there some other way around this problem?
I am trying to use combo box to display my data, here are the details. I am having 20 Departments, and have Budget and Actual values for those Departments for each month for the year 2008, tell me the logic to use combo box as dropdown list for Dept. and how can i get values in first 5 to 10 rows after changing the Department in Dropdown list(Combo Box)
View 5 Replies View RelatedI have two numbers...let's say 1 to 10.
I would like to fill in the middle numbers to lst in Excel as 1 2 3 4 5 6 7 8 9 10.
see attached for an example of waht I'm trying to do.
I can manually do this with the fill handle but I have numbers to fill in the thousands in some cases and tens in others. I would like to automate this process if possible.
In Excel 2003, when I had a filtered list, I could enter text in a column and copy that text "down" to the "visible" rows- and it only copied to those rows. In Excel 2007, when I do a fill down or use the fill handle, it copies the text into the "hidden" rows as well as the visible rows. Is there an option or alternative way to "fill down" in a filtered list to only copy to the visible rows? Auto Merged Post Until 24 Hrs Passes;I did further research elsewhere on the web - it appears to be a known MS bug - here is the text I found that addresses the issue:
If you place your cursor in a cell within column A, before you make the
selection from the dropdown on that column, then the fill handle will behave
correctly. If the cursor is place anywhere outside of the autofiltered range before
making the selection with the dropdown, then you do get the behaviour as
described. It is a bug, MS do know about it. Alternatively, you can choose Insert tab>Table to apply to your data, rather than using Autofilter. The Data table has the same dropdowns, and the autofill feature always works correctly when you make a filtered selection and then fill down.
I don't believe my earlier post was a duplicat thread. I posted the original thread, then posted a LINK to the original thread. I didn't even ask the question in the link, so there was no way someone would have wasted time answering the question from there. I didn't think I was breaching protocal. Anyway, since both instances of the thread were closed, here is the re-post.
I've recently been trying to learn a little about pivot tables. In the example attached, I have 2 worksheets. One holds raw data collected from suppliers, the other holds a default pivot table created from that data.
So i need a way to find the minimum number in a given set of numbers without there being multiple minimums. For example if you had 1,2,3,4,5,6,7 the minimum would be 1. If however you had 1, 1, 2, 3, 4, 5....i want excel to recognize there are multiple minimums (two 1's) and produce a warning (i realize this probably needs to be coupled with an if statement).
View 3 Replies View RelatedI have row of data from cell A2:E2 to A5000:G5000
in Column B I have customer account number, and they should not repeat but some reason some customers repeat more than once,
so out all column A B C D E if there if customer repeats only thing can be same is customer account number
so for example below, account number 12 repeats so I want to only few all account number 12 so I can compare both row and delete the only i need to delete and go back to original
DATE
ACCOUNT#
FIRST_IN
LAST_IN
SOMEVALUE
1/22/2012
12
A
B
2321
[code].....