I am trying to get the sumproduct of a column of amounts based on the adjacent cells ID code.
For example column B will have codes 1FHD, 2FHS, 3FHG etc. these codes will be mixed otherwise I would have just did a sum of the cells.
Column C would have dollar amounts.
Sumproduct based on adjacent cell ID Code
Been racking brain, searching through the forum here, and my Excel 2003 Bible all day trying to figure out this problem to no avail. I would like to clear the contents of any cell in a given range if the cell immediately to the right of is formatted as bold.
View 2 Replies View RelatedI need to write a condition in such a way that cell IF A1= "DBR","BPR","SLR","SKR" then change cell B1 to SPECIFIC COLOUR Each condition different colour. A1 values ("DBR","BPR","SLR","SKR") is a list of selectable values. if the condition is falls then B1 should be normal (white color cell) with 0 in it.
View 1 Replies View RelatedWhat I want to achieve: those cells have number 1 ( in column E) , adjacent cell values ( In Column D) are copied to G12 in the following format:: Mark,Lark ( i.e. cell value , cell value, etc)
is it possible ( with a command button) Sample attached
I am looking to add a function to a current spreadsheet that writes the current date to a cell when another is updated. The sheets function is to have a user record when a particular action has been completed and then remind them after a given amount of time. The user is faced with an option to input a "1" to essentially "start the timer" and then the date that is automatically input by the code will be used to compare with the current date. I have tried the following on the Workbook_SheetChange sub
If ActiveCell.Column = 9 And ActiveCell.Value <> 1 Then
ActiveCell.Offset(-1, 2).Value = Date
End If
But cannot figure out how to eliminate user error. Let me explain. If a user enters a value (will only ever be a 1 to indicate "yes") into column 9 then the date appears in the correct place (two cells to the left) If however a user deletes a value then the date will update one cell too high!? I also thought of using a cell based if statement (if j7 = 1 then today() else "" but this only updates with todays value each time you open where I want the date to stay as the day the cell was updated. The date is going to be used as a way of working out when to change the original value of the cell in column 9 to "".
How would I make cells in column A to C be highlighted yellow, of which is 0.02 in value be higher than in compared with the adjacent cell in column D ? It is easy to use condition format function to setup the conditions in 1 row. The problem is there are thousands rows in the sheet(of which represents an individual file by each row), and need to have the conditioning format applied on each row independently. How can it be done w/o the need to have format painter applied line by line, of which is a very time consuming.
View 6 Replies View RelatedI have been reading through trying to find a similar post but the nearest i could find was one dealing with numbers rather than text. This is how the workbook looks.
Column A contains a list of numbers based on vehicle types. Column B contains a list of vehicle names.
A B
1 Car,
1 Taxi,
2 Bus,
2 Lorry,
3 Skateboard,
3 Bike,
1 Motorcycle,
What I am looking for is the best way to combine the text from column B depending on the value of column a. the finished results would then end up as: "Car,Taxi,Motorcycle,", or "Bus,Lorry," etc. This is just a simple list.. The one I am working with has around 2500 entries. I have been trying to do this using the CONCATENATE function and IF statement but it's just not working..... My head is ready to explode
Set cell fill color based on number of adjacent cell
I am doing a research with the following information. In column B, I have the name of the buyer company, column B cells that contain numbers 1, 2 or 3 opposite the company name in column B depending on certain characteristics. I would like to mark the companies in column A in different colors (or some other recognizable way) as described below.
columns result
col A col B col C
7 Materials Inc 3
7 Materials Inc 2
6 Rayon Inc 3
6 Rayon Inc 3
6 Rayon Inc 3
8 Commun Corp 1
8 Commun Corp 2
8 Commun Corp 3
8 Commun Corp 2
8 Commun Corp 1
I would like to have on output in column A as shown above according to the following criteria:
4: if there are only 1 in column C opposite the specific company in column B
5: if there are only 2 in column C opposite the specific company in column B
6: if there are only 3 in column C opposite the specific company in column B
7: if there are 1, 2 and 3 in column C opposite the specific company in column B
8: if there are 1 and 2 in column C opposite the specific company in column B
Any suitable function in excel or Macros that can work with the formatting, because I have tens of thousands of companies and it will take too much time to do it manually.
I want the font of a value in a cell to turn green or red based on the value of the cell below it - NOT based on a set value or range like all of the other examples are based on. I want to apply a formula or condition to the entire table.
Column a has the date for each value, newest date is row 1 and oldest date is row 250. Column b-k has the number value for each animal species we are tracking. If there are more animals than the day before, the value went up and I want the font to be green. If there are less animals than the day before, then value went down and I want the font to be green.
There are about 250 rows in each table and I have 4 tables. I thought I could do conditional formating but I can only find how to change font color based on a set value. For instance, for each day there are over 10 turkeys, then it would be green. That is NOT what I want, see below:
Mon 5 no color change
Fri 5 color change to green
Thu 4 color change to red
Wed 5 color change to red
Tue 7 color change to green
Mon 5
date looks more like this - col a is date, col b is turkey, col c deer, etc
Mon 5 4 3 4 2
Fri 5 3 4 2 7
Wed 5 2 7 1 0
Tue 7 4 6 5 9
Mon 5 1 1 5 4
I would think this is similar to daily stock prices, if data goes up then it is in green, but if the price goes down then in red. Not based on purchase price (set value), but based on previous days closing price. For this report, I only care about the change day to day.
Is there a way to shade a cell based on whether the adjacent cell is shaded? I found some ways to do this with VBA but I was looking for a non VBA solution if possible. So basically if cell C5 is highlighted yellow I would want cell D5 highlighted yellow too, regardless of the values inside the cell. Is this possible without VBA?
View 6 Replies View RelatedI have a spreadsheet spread over with dates in column A from September to December and I have a fuel rebate column as well. The fuel rebate is different for each month and is calculated as a certain amount of cents per dollar added to the total amount in Column B
September: 26c
October: 13.5c
November: 43c
December: 66c
e.g. If there is an invoice for 10/9/07 (september) for $100, then the fuel rebate would be $100*.26 which equals $26 fuel rebate. I want to calculate column B (this is the column with the dollar amount in it), but I want the calculation to be different depending on what date is in column A, so if in column A the dated month is October, then the calculation would be something like B2*0.135. give me the calculation I am certain you don't need VBA for this right (just nested IF statements?)
The easiest way for me to explain it is to give an example: if the list contains Red,Blue,Green,Yellow. i need a formula for the adjacent cell that inputs £1 if red is chosen, £2 if blue is chosen, £3 if green is chosen, £4 if yellow is chosen
View 2 Replies View RelatedThere's got to be a way to do this (mail merge style perhaps...) I would like to insert the entry/ies under a heading in a table in one worksheet whenever that heading matches the data entered in a separate worksheet.
Presently I can find no way to do this in Excel.
I have a column of dollar amounts (variances) and next to each is the shift they belong to.
I am looking to get a break down of the variances for each shift.
Attached is an example of what it looks like.
A2:A5 contains different dollar amounts, a6 is the sum of those amounts
In column B (B2:B5), i place a "p" beside the amount in column A once it has been paid.
I want to:
a. conditionally format the amounts in column a to turn green once I put the 'p' in the adjacent column
b. conditionally format the sum in A6 to exclude amounts that have been paid, and only display the total amount of the unpaid lines.
I want AB1 to highlight red if date in S1 is not blank and N1 doesnt equal AA1. Is this possible?
View 1 Replies View RelatedI have a column of dollar amounts (variances) and next to each is the shift they belong to.
I am looking to get a break down of the variances for each shift.
Attached is an example of what it looks like.
I have the following formula in cell H2:
=AND(EXACT(G2,UPPER(G2)),(LEFT(G2)>="A")*(LEFT(G2)<="Z")*(MID(G2,2,1)>="0")*(MID(G2,2,1)<="9")
*(MID(G2,3,1)>="A")*(MID(G2,3,1)<="Z")*(MID(G2,4,1)>="0")*(MID(G2,4,1)<="9")*(MID(G2,5,1)>="A")
*(MID(G2,5,1)<="Z")*(MID(G2,6,1)>="0")*(MID(G2,6,1)<="9")*(LEN(G2)=6))
I would like to prohibit data entry in G2 if H2 reads "false" and allow data entry in G2 if H2 reads "true" .
i am looking macro formula to delete row with 2 criteria :
- delete rows if yellow color background and based on adjacent cell (blank cell), otherwise keep rows when adjacent cell not blank
ABCDE
FGHIJK
If the above is in different cells, I want to be able to move the data in "G" to the cell beside "E" (up a row and over 4 columns) IF the cell to the left of "G" equals what I specify is in "F" (for example use "product"). I would want to apply this to an entire sheet, not just once. If the macro (not sure what its called) could also then delete the row that contained "G" after it moves it, that would be even better! The output in the example above would be:
ABCDEG
F HIJK
I have three hidden columns (Text only) one column with Parts, then Description, then Cost. I have a pull down menu (i.e. Cell 3, A) listing all of the choices in the hidden Parts column. I want to automatically populate Cell 3, B with the corresponding Description when a Part is chosen from the pull down menu, and the same in another column for the Cost.
I am using Excel X for Mac, in OS 10.5.2
I have a large workbook with 2 rows of data I want to format (R25:R530, M25:M530). Row M is already populated, row R is new data that I am entering. When the value of a cell in row R is larger than its adjacent cell (R25:M25) in row M, I would like the font to turn red. When the value is smaller, I would like the font to turn green.
With the amount of time I've spent attempting to conditionally format, I could have gone through and formatted each cell individually by now!
I have a spreadsheet with data populated down column B. This size will vary from day to day so is there a macro I can run that will populate Column C with a formula based on their being data in the adjacent cell.
View 2 Replies View RelatedI need to lock the cells in a certain column based on the value of the right side cell. If the value of the right side cell is "Slave" it should lock the cell, otherwise it should remain unlock. I read many codes in the internet but none of them worked properly for me.
View 9 Replies View RelatedI have a spreadsheet with 'due date' for returns in column L and 'received date' for returns, in the adjacent column M.
I would like to get the due date to turn red when it is overdue, ie. the date in the cell has arrived and no return was submitted. By trawlling the forum, I managed to accomplish this with the following in conditional formatting:
Cell value is less than or equal to =TODAY()
All's great.....but - I would like the date to turn back to black if I enter a date in the adjacent received column, column M.
In other words, I want to flag a problem if the due date has passed, but once I receive the return and enter the date I receive it, i would like the due date entry to revert back to the original formatting ie. black. So only the outstanding returns are highlighted.
I have columns of figures with times like 5:52:54 and next to them cells with values that i wish to format based on the time.
that is if the time on the adjacent cell is before 8AM then make the value cell have a red border it does not have to be conditional formatting - Excel 2002 in win7/64
Macro that could look at a row and take the values of two cells, combine them and then create a range name for a third cell in the row.
For example; for row 5420, in column C there is the word Florida, in column D there is the number 6235, and in column F there is a sentence or two. Is there a way to automatically create a named range for the cell of column F that would be named FLORIDA6235? And if so, can the macro do this for every row even if the word and/or the number changes.
I have roughly 28,000 rows and nine columns that I am working with. That's why I was wondering if there was a way to automate this. There are 10 states and I don't know how many different numbers attached to the states, however there are many state and number combinations that repeat, so there would be several rows with Florida in column C, 6235 in column D but a different description in column F.
What I have In Column B, I have the datesIn Column I, I have engineers name What I need I want a macro to generate Serial Nos. (1,2,3....... n) in column A If an only if the date in column B is today's date and the engineer's name matches with the PC's username
The following is my code
[Code] ....
Above code runs without errors but does nothing.
This is probably elementary, but I'm struggling and would appreciate any help as I have very little excel VBA experience to draw from.
I have assembled code which changes the cell color based on a value change in Column A. Column A will contain many different groups of repeating values. This code works well and and I have been able to figure out how to limit the number of colors to only 2. The end result is each set of similar values in column A is visually grouped by one of two alternating colors.
The number rows in the data set is variable as the data set is extracted from SAP. The number of columns is fixed.
What I want to do now is set the cell color in columns B through F the same color that was assigned to the row in column A. So if cell A3 is set to colorindex = 6, then I want to set the range of cells B3 to E3 to the same color.
Here is the code I am using to set the color of the cells in Column A:
I have two columns. The first one (A) contains cells that have different Fill colors. The second column (B) contains text adjacent to the colored cells. I am trying to change the color of the text in the second column (B) to the corresponding color in the adjacent cell in the first column (A). I don't think conditional formating works well in this situation. I believe the solution would be some sort of macro.
View 3 Replies View Related