I have a workbook that contains 25 worksheets and in those sheets there are common items for different equipment, all the sheets are exactly the same when it comes to lay out, except the first sheet, the data differs accordingly on the subsequent sheets. Being new to excel I do not have a clue how to set a seach box at the click of a button and copy and paste the part searched for thru all the sheets in the first sheet and at the same time deletes the latest search when a new one is carried out.
I am looking for a code that would copy the data from each worksheet in a given workbook and then paste to just one worksheet within a different workbook. The Sheet names are auto generated when I run this canned report but the naming structure is always the same...the first worksheet is named Repair Details and then the next sheet is named Repair Details_1, the next sheet is named Repair Details_2 and so on for every sheet in workbook. So I would like to copy all of the data(Headers to last cell) and then paste in a worksheet(ex: Master Repair Report.xlsx and the worksheet could be titled Master Repair Details) on a different workbook, then the next sheet would copy from the one under the header to the last record and paste to the same workbook. This process would repeat for every worksheet in the Repair Details Workbook and paste to Master Repair Details worksheet in the Master Repair Report workbook.
I am using MS Office 2010. I want to count---on multiple sheets---the number of times that a given cell is greater than another cell if and only if a third cell is equal to a given value. I want to do this for 4 sets of data on each sheet. I thought I had it figured out with this formula---
but it returns a value of zero each time. Clearly there is an error in the formula.
Here is some background: -- $H$1:$H$43 is a block of cells that has the names of the sheets in the workbook -- E1 and F1, G1 and H1, I1 and J1, K1 and L1 are the four groups of cells that I am comparing. In the entire workbook, I want to add 1 (counting function) only when: R1=2 AND E1>F1 or S1=2 AND G1>H1 or T1=2 AND I1>J1 U1=2 and K1>L1 on each appropriate sheet in the workbook.
I have about 20 workbooks with different file names for different projects all saved in the same folder. Each workbook has about 10 worksheets and each worksheet is named in a similar fashion in each of the 20 workbooks (eg. revenue, cost, variance etc.). I want to pull out a worksheet named ' forecast' from each workbook into a master workbook so that the master workbook would contain the 20 forecast worksheets.
I have a simple macro that uses a textbox to act like a search box and filter a column based on the entered text. After the search, however, I would like the contents of the search field to be cleared.
Macro:
Sub Search_Supplier() With ActiveSheet .Range("$A$6:$AF$643").AutoFilter Field:=5, Criteria1:= _ "=*" & .Shapes("TextBox 38").TextFrame.Characters.Text & "*", Operator:=xlAnd End With TextBox38.Value = "" End Sub
How to protect multiple sheets in a workbook and not having to protect them 1 by 1. I have copied and pasted all the different macro's/visual basic script that has been posted for that purpose, but I can't get it to work and I'm always getting an error. The error from visual basic says "compile error: invalid outside procedure" and then the visual basic screen shows the following:
Range ("AM52") If Ans >= 0 Then "+."
It does not like the "AM52" part because it is highlighted in the error message.
Also, the error I get from recording my own macro step by step is "Run time error 40036" from visual basic.
I am looking for some code to copy the exact values in a couple sheets over to a new workbook. There are images in the sheet that need to come over and formatting of cells including merging.
Trying to sort on multiple sheets in the workbook. The range that is to be sorted will vary on each sheet, so i would like to write the range as .end(xlDown).Row and then do the sort. So far, what I have written is giving me a type mismatch error
Code: .Sort.SortFields.Add Key:=Range("B2:B" And Range("B2")).End(xlDown).Row, _ SortOn:=xlSortOnValues, Order:=xlAscending, DataOption:=xlSortNormal
I have this one sheet (File 1) where I have the unique codes of people and am trying to perform a vlookup() for a value by specifying the lookup in a dfferent workbook (File 2) but multiple sheets. In other words the data (unique codes) is scattered in different sheets in that workbook (File 2). I need to perform a vlookup() wherein the codes finds a match in whichever sheet in File 2 and the value in the specified column be entered against the respective cell in File 1.
I tried selecting all the sheets in the formula but it does not return a value for all the inactive sheets in File 2. Vlookup() works fine for the Active sheet only.
I expect this may have been done before, I have a workbook with 6 sheets. Each sheet lists a register, each register has between say 12 & 25 column, 1 column in each sheet denotes a "y" for exporting to another spreadsheet (not the same column in each sheet though)
what I would like is some code that will open a new workbook, and copy each of the sheets (all the fields/columns etc) into the new book, but only the lines that have the "y" next to them.
I have codes that export one sheet , but its not really relevant to what i need to do.
but I can't do this when I want to unhide them. I do not want to unhide all sheets in the workbook, only those I specify in the code. How can I use the something like the array code to unhide the sheets.
I have a large workbook with 10+ sheets i need to protect all at once. I have created a macro in VBA below. It works, but I would like another user to be able to change formatting on the sheets while they are protected. below is my macro.
Sub ProtectAll() Dim wSheet As Worksheet Dim Pwd As String
I have managed to pull together code that does the required task - save two sheets from a work book in to a new workbook on to a dorectory each day. However I woul;d liek to paste special the values and cannot figure our how to reference that on the below:
'saves text file in day on day folder Dim WS As Worksheet, CheminDest As String, fNAME As String 'create directories as needed On Error Resume Next CheminDest = "T:DMRatesReportsChecks" & Year(Date) & ""
I have a workbook containing 120 sheets. Each sheet contains a column labelled "Subject", and a row below labelled "Totals:" with a numeric value in the intersecting cell.
I need a formula that will total the value in all these cells on the last sheet.
The trouble is, the cell address of the intesecting cell fluctuates somewhat from sheet to sheet because the column and row for the "Subject" and "Totals:" are not always the same.
******** ******************** ************************************************************************>Microsoft Excel - Book1.xls___Running: 11.0 : OS = Windows XP (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutF30= ABCDEFGHIJKLM5**Check*Date*01/05/2007*to*09/28/2007,*Job*616003*to************6**6440009,...,Job#*642010*-*HEATHER*GLEN@MONUMENT*BO************7*************8***Record#****Check#**Period***Employee*****9****Comp*Code*********Hours**10*************11*************12*************13*Totals*by*Comp*Code:*************14*Comp*Code*************15*****Hours****Wages***Overtime**Subject***Rate*16*************17*5183***PLUMBERS*UNDER*$23*************18*****19.00****376.50****376.50***11.5400*19*5187***PLUMBERS*ABOVE*$23*************20*****5.00****120.00****120.00***6.5300*21*************22**Totals:***24.00**496.50*0.00496.50**Sheet8* [HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box PLEASE DO NOT QUOTE THIS TABLE IMAGE ON SAME PAGE! OTHEWISE, ERROR OF JavaScript OCCUR.
I want to be able to total the "Subject" wages for codes 5183 & 5187 (unfortunately, the payroll amounts are located one row below) for all 120 sheets in the workbook.
New to using Excel formula's and am trying to create an IF/LOOKUP formula to look at multiple sheets within a workbook and display the information within the 'compare' sheet.The yellow cells are where data will be entered.
What I am trying to achieve:
Type the store numbers on the compare sheet (B2 and D2). For the sheet attached I have put 190 (in B2) and 2012 (in D2)
B2 store shows the predicted and actual values of 190 in columns B & C
D2 store shows the predicted and actual values of 2012 in columns E & F (No need to worry about variance and difference columns)
So, if I change the store numbers in B2 and D2 to any of the sheet numbers, I want it to display the correct info for that particular store within the compare sheet.
I have attempted a formula, which you can see... I have basically looked at some previous sheets that had IF and LOOKUP on it and tried to replicate that for my sheet, but with no luck.
I'm trying to protect the contents of columns in multiple sheets in a workbook. I've tried to group the columns ( - months, i.e. sept, oct, nov 09 through to march 10) but when I go to Protection options the 'sheet' protection option is not available, all I can do is protect or unprotect the entire workbook.
I've also tried to protect the workbook, but individually set the specific columns in each sheet to be protected (repetitious but seemingly unavoidable), but this doesn't work well either as there's now a mix of a protected workbook and protected columns, both with individually set passwords to unprotect... which seems a bit silly.
There must be a way around this? - the columns are H, J, K and L, and the entire contents of the summary sheet '2009-10 Financial Year'... basically I'd like to be able to protect all of the contents of all of the cells here, ideally just with one password.
Is it possible to automatically have columns repeat through all sheets in a workbook? I keep an annual book, broken down by sheets for each month. I always have to add 5 columns to each sheet, and was wondering if there was an easier way..?
I want to merge different worksheet of an existing workbook into one by macro .I did not want to repeat the rows label for each worksheet data.Also I want to get at right hand side i.e in G column the data to be extracted for respective worksheet in the merged data.I have enclosed in attachment an expected solution in a sheet name "merged".However the number of worksheet is here only 3 for sample purposes.However,in reality there is more than 3 .
I am using Excel 2007. I'd like to merge multiple sheets (about 13) into one workbook. The sheets are placed in one folder, and they all include 2 sheets, - only the first sheet should be merged into the final workbook.
The sheets will be updated every 3 months and merged again (-thus replacing the old data).
I'm trying to set up a way to format column widths and row heights in a macro (so that it can read a value from a cell and format a column to that width). I've used the code below which can be repeated for the number of rows and columns desired below
However, I want to be able to do this on a workbook that could potentially have 40+ sheets. Is there a way of applying this code to operate over the whole workbook rather than just one sheet at a time?
I am looking for either formula which will allow me to copy data from a workbook with multiple named sheets into a workbook with a single named sheet. For instance workbook 1 has sheets named bob, sue, and tom and there is a workbook 2 which only has sheet bob. I want to copy the range fo data from sheet bob in workbook1 to workbook 2 as long as workbook 2 has sheet bob.
I have a macro that takes info/data from multiple sheets in the Basin workbook and summarizes it into the Median Database workbook. I need to copy the values in range B5:EM5 in every sheet (each sheet name is site #) in the Basin workbook and paste that range into the median database workbook row with the corresponding site.
Here is what I have so far
VB: Sub Median_Database() 'This Macro takes the median from each station tab in the current Basin workbook 'And inserts it into the Median Database workbook
[Code]....
how to grab the sheet name and insert it in the median database. The problem is the copy/paste of the range in each sheet. The macro locks up every time.
I have a workbook with many sheets labelled as mmm-yyyy. The constant columns in all the sheets are C,E,R,T, and U.
Is it possible to have a macro do the following: Add a sheet called Summary at the end of the workbook. From the last sheet of mmm-yyyy, copy columns C, E, and R to the Summary sheet. Copy columns T and U from all the other mmm-yyyy sheets to the Summary sheet. All the cells need to be centered.
I am having trouble getting the selection of sheets to work. I have a workbook that has multiple sheets and one constant sheet (Summary). There is code to create new forms in this workbook and insert them after the Summary sheet. These forms all have a date input that is formatted as a date (mm/dd/yyyy), these dates get modified on the day the form is created, there may be any number of sheets created during this process. I have to print the summary sheet and only the newest forms created. I need a code to select sheets to print based on the date input of a user for each form. This is what I have so far:
VB: Dim i As Variant i = Range("B5").Value >= InputBox("What date to start PDF from? Format = mm/dd/yyyy") Sheets(Array("i")).Select [code]....
If the dim can be taken out and just included in the line for the array that would be fine with me. The cell "B5" is where the date is located in each form. I want to input a date and the macro will select the sheets where the date is equal to and greater than the date entered. The Summary sheet will always be included in the print set. I have a dialog box for setting which printer to use - this file will be used at different offices and therefor the printers will be different and it will also allow to create a PDF if desired.
I am trying to combine several workbooks containing data in multiple sheets into a master workbook. All the workbooks have the same number of worksheets. I would like to combine all data in Sheet1 into a new Sheet1, all data from Sheet2 into a new Sheet2, etc.
I am new to the VBA editing and I am missing some steps to get my files correctly generated and then ideally saved in PDF format in the same folder.
I have two files; one is an invoice template with the following fields:
Invoice Reference: Line 8 column D Issue date: Line 9 column D Client name: Line 11 column E&F Client address: Line 12 column E&F Product name: Line 16 column E&F Product details: Line 18 column E&F Production date: Line 20 column E&F Delivery date: Line 22 column E&F Units: Line 24 column E&F Total Units: Line 26 column E&F Total Invoiced: Line 30 column F
Each sheet in the "template" workbook should be named after the Invoice Reference.
Secondly I have the source file in which the data is organized as follows: (Both are in the same folder)
Invoice Reference: column A Issue date: column B Client name: column C Client address: column D Product name: F Product details: column G Production date: column H Delivery date: column I Units: column J Total Units: column J Total Invoiced: column E
One invoice needs to be created per line in the source workbook. I tried many times the macro recording without getting the correct outputs.
