I have a macro which does a check on certain fields to see if any are greater than the value 3. The cells are in the same column, but goes 33 rows down from the starting point. If it finds it, a messagebox appears to the user. It works fine if it finds values 4 through 9,but does not work with values greater than 9. (I have had data with values of 17 and 22 to test) I first checked the cell types to make sure everything was the same, and it is. Below is my coding, do I have to add something infront of the Value property?
'I have selected the cell where I need to start from
For Each i In Range(ActiveCell, ActiveCell.Offset(33, 0))
If i.Value > "3" Then
MsgBox ("Pieces per shipment is greater than 3." _
& Chr(13) & "It's value is " & "'" & i.Value & "'" & " found in cell: " & i.Address _
& Chr(13) & ". Profile must go to Finance for review")
End If
Next i
Below is what I currently have on my excel spreadsheet:
1. 2. Input Column 3 3. 0 No 4. 2 Yes_2 5. 0 NO 6. 0 NO 7. 0 NO 8. 2 YES_6 9. 0 NO 10. 1 YES_8 11. 0 NO
The spreadsheet starts by the user inputting numbers ONLY in column 1 (under input). The rest is done automatically by implementing equations. Column 2's equation is easy, if the value of column 1 is greater than 0, return YES_(row number). In addition, the maximum number of Yes's in column 2 is three (constraint).
My problem is that I need a 3rd column, consisting of only 3 rows that search for YES_1, YES_2, and YES_3. The 3rd column's equation is easy, I will simply use the Vlookup function for YES_1, Yes_2, and Yes_3. Therefore the PROBLEM IS: I need column 2 to output YES_1 (in row 4, from the example above), YES_2 (in row 8) ...etc. This would mean chaning the basic IF equation that I have which simply sees if the value in column 1 is greater than 0 then outputting "YES_the row number".
I am trying to do is extract the volume size of products in 'ml' from 10k plus products from a description field cell. this description field could also contain the weight of the product in grams so I cannot just do a search for a numeric string , it has to be associated with the milli-litres statement .
is is possible to do a sort of ' *ml ' search and then select and copy to another cell ???
I have to make a table that shows that a if someone purchases
less than 5 items they receive no discount 5-10 items they receive 2% discount 11-20 items they receive 5% discount 21-50 items they receive 8% discount over 50 items they receive 10%
and it has to be done in a way that the discount rate can be calculated using Vlookup I am struggling to find the best way to write this table. i tried numbering 1 to 50 and writing the corresponding discount rate in the second column but this looks untidy and can't calculate greater than 50 as i am not sure how to write it in the cell so it reads as >50 and not just 50.
I have a column of several thousand entries listed as numeric with a scientific symbol eg.
1.4mSv 19.53mSv/1mSv (some have a mix and or alpha/numeric range)
I want to convert them to the numeric value only. I'm extracting to a chart which is not recognising the alpha and throwing the data out. I tried find and replace, trying various options within the 'replace format' tab with no joy.
I have a few thousand products codes (i.e ABCD123BLA08 or SHU267BLA) They are non standardised in length or structure. I wish to pull out everything upto the end of the third numeric digit.( ie ABCD123 and SHU267) I cannot use left as they are all different lengths. Ideally i would serach for a non numeric char after the number then use left up to that point. Search can't do this, FIND can't do this.
Summary ABCD123BLA08 would be ABCD123 SHU246BLU would be SHU246 I147ORT08-12 would be I147
19352510 C084111X AA 24253081 A001290U AA 19599291 48413321
I want to write an If Statement is a column next to each entry that denotes two options either Broker or Agent. Where the code is say 19352510 then Broker and where it is say C084111X AA then Agent.
Broker codes will never contain a letter. The Agent code will always start and finish with a letter.
I have doc with app 1000 rows of data, one col being product description. I want to simply search the entire description column for a particular string of characters and enter a 1 in a new adjacent column where there is a match. Where there is no match, I want a 0 or a blank.
I need to be able to search through category(column H) and match with machine size category. Then for each category split up total time spent on each function. Granted this will be 6 formulas. I've searched through the forums and came up with what I have....
I have 180,000 names in a spreadsheet with unique codes for each, I need to search for names and find their code numbers, how can I do this over a series of 8 columns.
Code Name code Name code Name Code Name
I'll need to search columns 2, 4, 6 and 8 for the name?
Have the following scenario I'm struggling with in Excel 07:
2 worksheets:
WS1, have a bunch of customer data. Relevant columns in this WS include customer number (unique value) and a column called "adjustment date", which is formatted as a date as the label name implies.
WS2 is a bunch of customer transactional data, with each row being a unique transaction. Relevant columns here include customer number (formatted same as in WS1) and transaction date.
Couple things to note: in WS2, each customer may have dozens of transactions. Right now, I have that WS sorted by transaction date in ascending order (so oldest to newest).
What I'm trying to do (unsuccessfully so far!) is build a formula in WS1 that says "on what date was the customer's first transaction after their adjustment date"?
I've tried constucting something using =index+match, but to no avail.
I have a workbook with 100+ tabs(not in alphabetical order), and am constantly scrolling back and forth looking for tabs, is there a quicker way to search tabs? I have also right clicked the arrows to pull up the box with all tabs, but not the best option either.
Column A contains letters Column B contains numbers Column H contains data
I need a formula that will do the following:
Lets say cell M1 contains a certain letter, and cell N1 contains a certain number. I need to find the row on the spreadsheet that has the letter shown in M1 in column A and number shown in N1 in column B. Once the row is found, I need to return the data in column H of that row.
I have a program that creates a query of data into two different spreadsheets.I wish to create a master page that automatically searches for data in each of two spreadsheets and add them appropriately to the master page.
I get how to do such thing using vlookup to search for data in one spreadsheet, how to do that in two spreadsheet situation.Here is a formula that I am stuck on...
Goals *VBA - code *Search down a column of Serial numbers that are in numerical order....Column A,B,C........ *find the last duplicate and the row of that SN 3301 3301 3301 3301 3301 <---What row is this 3302 3302 3302 3302<---What row is this
*Then Store that row number in a variable like a,b,c,
I'm trying to print score cards from the scores sheet (two different worksheet pages). Some score cards (each score card is one page) will only have 3 players and some will have up to 5 players so I can't just go down the list and use a formula to transfer data line by line. I will set the score sheet up I just all of hole 1 players to be printed on a card and so on with hole 2-18 also I need First and Last names on the cards and possibly score total by the name.
I have this data and want to extract the character after the letter Y if the string has a Y in it.
Example data Output
AU 2013 OD ANR B24 Y2 2 AU 2013 OD ANR B24 Y4 4 AU 2013 OD ANR B24 Y5 5 AU 2013 PD HLD NOV B SPA AU 2013 PD HLD NOV C SPA AU2013OD ANR B25 Y1 1 AU2013OD ANU B25 Y5 5 AU2013OD WCR FPVN B49 AU2013OD Y6 FPVN B49 6 AU2013OD WCR FPVN B40 AU2013OD WCR FPVN B43
I want to test a cell for the type of value as 678/256 or 345/872/098/987 etc. The common character in each would be the "/". First, I need to check the cell for this, then take the first number and compare it to an integer(if it is <> , or = to). I hope I am clear with my situation.
ive got table consisting of about 4000 entries. Below is a small example.
[url]
I want to be able to make a button through macro's, where when pressed, it shows only certain postcodes - the way i've been doing it so far is using a combination of If, And, and Or functions to return true or false if a postcode begins with either 'AH4, AH1' and has an order number beginning with 'W', for example. Then I'd record a macro where it shows the ones showing true, via data filter. The problem I've got is I need to search for about 50 different combinations of postcode, out of a list of maybe 300 types of postcode, and using my current IF,AND,OR functions, I simply run out of room in the formula bar! For example, I need find a postcode beginning with CB1-25 (i.e. CB1, CB2, CB3) etc..etc.. the only problem is if i use my current LEFT function, and i want to search for say, CB1, CB14, CB15, out of a list of 'CB1,CB14,CB15,CB16', it will still return a postcode beginning with CB16, due to the CB1.
In the link I've highlighted the postcodes I want to search for out of that small list, and hopefully any solution I'm giving here I could expand to up to 100 combinations out of 500 combinations of postcode, for example.
How do I get it to search for a massive combination of criteria?
I have a workbook whose worksheets use protection (don't want my calculations stomped on).
When the Protection is on, the search function does not work. You call it up, write what you are looking for, it accepts it, and then when you tell it to search it ignores you.
When you turn the protection off, the search function works just fine.
HOWEVER....Other workbooks I have with protection on its sheets do not share this problem, just this one workbook. And the problem is on all sheets in this workbook. The problem is not on any of the sheets in the other workbooks. I can't see anything different between them, but then I may not know what to look at.
I'd like to search a cell A1 containing for example 'hello_L765'. If the 7th character is L and the 8th character is text(ie not a number) than display yes, otherwise display the 7th character.
I am trying to NEXT my way through a column of comments and highlight the cells containing the key words. Below is what I have put together, but I know it is NOT working correctly....
I have a list of records that for which I cannot find values for. Essentially I have a dataset that I need to match to other information but for some records this 'other information' is missing.
1. I have a list of records with missing information 2. I have a folder with a large amount of sub-directories 3. I have many DBF files inside of these sub-directories with X columns and x rows 4. Somewhere within some row of some column is a value that links to my list of records 5. I need to search for my value in, say, A2 and return the file name and directory in which it lies 6. It can be text or number
I have 1000 diff names in a spread sheet and wish to search another spread sheet with these names on and alot more.
I want the search to look in the larger spread sheet for these 1000 names and copy all the informtaion in the cells to a new sheet, if the name is not found i would like something like "no info found" to be seen.
Im a novice to doing this sort of thing in excel, but i have found this script which searches for the word "mail box" and copies all the info in the cell when it finds it.
I have a value X in cell B5 and a Value Y in cell B6, in multiple worksheets
In my userform, i have 2 comboboxes
one holding value ranges for the x coordinaate (eg 0-10, 11-20,21-30) the other holding values for the y coordinate (eg 0-10, 11-20,21-30)
i want the user to be able to select a range from the x coordinate and the y coordinate...then i want to search thru all the B5 n B6 cels across the worksheets and return those worksheets that match the users input...
