Searching For Values Greater Than Zero, Listing 3 Of Those Data In Order
Nov 2, 2008
Below is what I currently have on my excel spreadsheet:
1.
2. Input Column 3
3. 0 No
4. 2 Yes_2
5. 0 NO
6. 0 NO
7. 0 NO
8. 2 YES_6
9. 0 NO
10. 1 YES_8
11. 0 NO
The spreadsheet starts by the user inputting numbers ONLY in column 1 (under input). The rest is done automatically by implementing equations. Column 2's equation is easy, if the value of column 1 is greater than 0, return YES_(row number). In addition, the maximum number of Yes's in column 2 is three (constraint).
My problem is that I need a 3rd column, consisting of only 3 rows that search for YES_1, YES_2, and YES_3. The 3rd column's equation is easy, I will simply use the Vlookup function for YES_1, Yes_2, and Yes_3. Therefore the PROBLEM IS: I need column 2 to output YES_1 (in row 4, from the example above), YES_2 (in row 8) ...etc. This would mean chaning the basic IF equation that I have which simply sees if the value in column 1 is greater than 0 then outputting "YES_the row number".
View 3 Replies
ADVERTISEMENT
Jun 6, 2007
I have a macro which does a check on certain fields to see if any are greater than the value 3. The cells are in the same column, but goes 33 rows down from the starting point. If it finds it, a messagebox appears to the user. It works fine if it finds values 4 through 9,but does not work with values greater than 9. (I have had data with values of 17 and 22 to test) I first checked the cell types to make sure everything was the same, and it is. Below is my coding, do I have to add something infront of the Value property?
'I have selected the cell where I need to start from
For Each i In Range(ActiveCell, ActiveCell.Offset(33, 0))
If i.Value > "3" Then
MsgBox ("Pieces per shipment is greater than 3." _
& Chr(13) & "It's value is " & "'" & i.Value & "'" & " found in cell: " & i.Address _
& Chr(13) & ". Profile must go to Finance for review")
End If
Next i
View 2 Replies
View Related
Sep 7, 2006
I have a spreadsheet that contains dates in column A and numbers in column B. For some dates I do not have data available but I must include all of the dates, so a date with no data available has a 0 in column B. I need to come up with a way to average the total of my data with the total number of weeks with data (ones without a 0) that will recalculate everytime I add new data. How do I write a function that will check column B for a number greater than 0 and then based on that result either count or ignore column A, and then total the number of times A is counted?
View 2 Replies
View Related
Oct 24, 2007
=SUBTOTAL(2,A2:A100) can be used in combination with any other formula so that when the data is filtered using autofilter it will only count values greater than zero.
I have attached a worksheet with the example.
In the attached workbook subtotal formulas are used in Row1 for sum and row 2 for count.
When the data is filtered using code "DUP" in column D, the subtotal in cell C2 is "4", whereas in the specified range there is a positive value in only 1 cell that is $1050 in cell C99.
Is there some combination that can be used with SUBTOTAL formula so that it will only count values greater than zero when data is filtered.
View 2 Replies
View Related
Feb 28, 2014
To establish the order for on duty personnel every month, I need to find a proper formula.
I have attached the workbook.
So, when I pick out a month from a drop list in cell A1, in column B returns (based on a formula) net work days of that month.
In range H:T, I have a table with the personnel names (in the header) and the individual holidays.
What I want is to have a formula in column C, that returns the name of the first available person (not on holiday in that day), in exactly the same order as it is in the table's header.
Attached File : ON DUTY.xlsm‎
View 5 Replies
View Related
Jul 31, 2012
I have a series of tabs in my sheet, the first one is called 'START', the last one 'END', and between them a series of other identical sheets ('Division 1', 'Division 2'... etc). In each of the 'Division' tabs, cell A1 (say) contains a string that I need to retrieve and order into a list on a summary sheet. The order doesn't really matter (i.e. it doesn't have to be alphabetical or anything), though it would be useful if there were no gaps in the list.
View 1 Replies
View Related
May 27, 2009
I have a set of data that I'm trying to identify the unique values in a column and then sum the related quantites against each of those values:
View 14 Replies
View Related
Jul 5, 2014
I have a table listing certain values (Column C) and their respective probabilities, based on normal distribution (Column D). As these probabilities are dependant only on values from Column C, I'd like to list all the values from that column into another fragment of the sheet, say F6 and below, but each value should appear there only once, no matter how often it occurs in its original Column C (I listed them manually in Column F in the enclosed example). Moreover, if a new value appears in Column C, it should be also included in the new place and sorted in increasing order.
View 7 Replies
View Related
Jul 25, 2014
I have created a simple account list with - date - detail - category - amount.
How can I automatically list each transaction in date order by category on other pages. Each category is represented by a letter - e.g. 'T' for travel. In this example I want to list all travel transactions in a separate list in date order on another page for easy printing.
I have made a Summary page for each category but cannot work out how to make a detailed list for each category.
View 13 Replies
View Related
Apr 15, 2014
I don't know if this will require a macro or maybe a function of excel, but I have a large listing about 1000 row in spreadsheet. Each row correspond to a unique customer. But I will have to extract only the customer that I am looking for, which is about 30 of the 1000. The cell A1 is the customer # which will be use as reference, so I have about 30 customer # to pull out from that listing. Which will be the greatest method to do so?
Example:
A1 44334 ERIK JOHNSON 60$
A2 34555 KARIM EDWARD 50$
A3 32555 EDWARD CHRIS 65$
A4 55666 STEPH LAWRAW 45$
...
I want to pull 44334 and 55666 the whole row.
View 8 Replies
View Related
Jul 4, 2012
I have a form with 4 TextBoxe's "TexBox1,2,3 etc" and a ListBox1 were the whole idea is that you enter a value in TexBox1 and the VBA code looks for any and all items on your data "respective worksheet" and lists any/all data that it finds "corresponding to the value in TextBox 1" in the ListBox1, just like a database of sorts. Also note the other TextBoxe's 2,3,4 have info in them as well corresponding to the value you put in TextBox1 using the offset function.
What I mean by this is that when ever I enter data in TextBox 1 or 2 or 3 or 4 that the results will be listed in the ListBox1. The reason I need this is, if the info I require for TextBox1 isn't available I can search for the info using the other criteria in the other TextBoxes.
When the code finds entries that relate to TextBox1 it comes up with a message window with the number of entries it found... just in case you were wondering about the code at the bottom of the cmdFind method.
Code:
Dim MyData As Range
Dim c As Range
Dim rFound As Range
Dim r As Long
Dim rng As Range
[Code]...
View 5 Replies
View Related
Sep 25, 2008
I have a Master sheet that lists people Name, address, City, Phone Number etc…
Now I have separate pages for each individual and was wondering if there ways away if I update or change there information on the master page that is would update there in individual pages as well instead of me doing this numerous times manually.
View 10 Replies
View Related
Nov 7, 2008
I'm using Excel 2003
I have done this once already, so I know its possible but I cannot remember what it is called and how to do it.
I have a "form", I open it up, fill out a few different things, and then save and print it. When I save it I want it to take a few different cells information and report it into a seperate workbook, without having to open the report workbook. I use this seperate workbook to reference when I fill out the form and who it was sent to.
I remember there was a wizard that I used to get it to do all this, but I can't for the life of me remeber what it was.
View 10 Replies
View Related
May 13, 2009
we log all customer communication on a daily spreadsheets a report. Multiple projects are listed on that one sheet every day. Is there a way to extract project related communication to a individual project log adding the date from the daily report to the log. The goal is to generate for each project a log will have the daily (or any) communication for one project from the daily report. either adding a work sheet via project name or a separate file. Also is there is a new project a new project log should be created.
View 4 Replies
View Related
Jan 28, 2013
How to list all data from different worksheets into one worksheet without manually copying and pasting it in a new worksheet?
For Example: I have 20 worksheets. In those worksheets are list of items that I bought from the different stores. I want to make a list of all items that I bought in one worksheet.
View 2 Replies
View Related
Feb 21, 2009
I have a 125x125 array of numbers each cell of which is equal to the row header divided by the column header. Using conditional formatting in Excel2007 I can visually identify the integer values. However, for each integer value, I want to list in 3 columns the cell value, the row header value (or reference) and the column header value (or reference).
View 9 Replies
View Related
May 7, 2009
I'm currently looking to develop a few formulas that can review individual lines in a table, identify specific values, associate a tag for that value, and then count the number of instances the unique value occurs.
I've had sucess with VLOOKUP and COUNT IF for the back end but don't know where to start on the front end.
In addition I'm unsure whether this is better suited to a Macro since the number of rows created will vary with the data table/array being reviewed.
View 10 Replies
View Related
Jul 18, 2014
I have a list of records that for which I cannot find values for. Essentially I have a dataset that I need to match to other information but for some records this 'other information' is missing.
1. I have a list of records with missing information
2. I have a folder with a large amount of sub-directories
3. I have many DBF files inside of these sub-directories with X columns and x rows
4. Somewhere within some row of some column is a value that links to my list of records
5. I need to search for my value in, say, A2 and return the file name and directory in which it lies
6. It can be text or number
is this clear?
View 5 Replies
View Related
May 15, 2009
I have a value X in cell B5 and a Value Y in cell B6, in multiple worksheets
In my userform, i have 2 comboboxes
one holding value ranges for the x coordinaate (eg 0-10, 11-20,21-30)
the other holding values for the y coordinate (eg 0-10, 11-20,21-30)
i want the user to be able to select a range from the x coordinate and the y coordinate...then i want to search thru all the B5 n B6 cels across the worksheets and return those worksheets that match the users input...
is it possible for this to be done?
View 6 Replies
View Related
May 2, 2007
I have the following data
A | B
_______________________
WD |100 From Bangalore
CR |Hyderabad 50
CR |Mysore 70
WD |900 From Kolkata
_________________________
and so on in A and B columns. In the C Column depending on the cell value I want just the places like Bangalore, Hyderabad, Mysore, Kolkata etc only to be displayed like shown below.
A | B | C
___________________________________
WD | 100 From Bangalore | Bangalore
CR | Hyderabad 50 | Hyderabad
CR | Mysore 70 | Mysore
WD | 900 From Kolkata | Kolkata
______________________________________
The Places in column B are not at finite position and that is the big problem i am facing when using Left or Right function. Could anyone help me with a proper Excel function to get this done. The thing is the whole cells should be searched and accordingly the output should be obtained.
View 12 Replies
View Related
Feb 11, 2013
compare some list of values in order to fiind the common values.
View 1 Replies
View Related
Jul 11, 2009
1st thing id like to know. is there any way to inset a picture (not using the background button coz i dont want to tile the pic) and then be able to work ontop of it?
2nd is there a formula to change the order of a list depending on the number (high to low) in 1 of my other box's
3rd how do i take a result from one page and copy it automaticly to another?
View 14 Replies
View Related
Oct 23, 2008
I have a problem with the formula that lookup all values in ascending order and returning all the corresponding values. eg: I was intended to lookup for the value in ascending order under the Total Occurrence and returning all the corresponding value under the Nos Group but encountered the same Nos Group was returned when there is same value appeared under the Total Occurrence.
View 3 Replies
View Related
Sep 23, 2009
I have a list of values in column A of sheet 2. What I would like Excel to do is search for each of these values on the whole of Sheet 1. Sheet 1 has around 20 columns of information and a dynamic number of rows.
In column B of Sheet 2, I’d like TRUE or FALSE displayed depending if the value is found on Sheet 1. For example
AB
1 DOGTRUE
2 CAT TRUE
3 MOUSE FALSE
4 HORSE TRUE
If this can only be achieved via macro, please post the code rather than a file as I can’t download the file here.
View 4 Replies
View Related
Dec 7, 2009
I am trying to create a sheet for invoicing. I have a sheet I want to use as a database. I want to search the database from the "invoice" sheet and fill the fields once i have found what I am looking for.
attached is a sample database I will use. I dont want to use the whole row, only selected colums. for example short_item description, item_number, Brand, SRP, ect. I want to search on the "invoice" sheet, for example, item description,and fill out the rest of the necessary fields in that row with data from my "database".
View 11 Replies
View Related
Feb 27, 2008
I have a pretty large sheet to look into ("CellData"). I am looking in column B which has the following value pattern:
129(8769)
I would like a vba code to search based upon numbers in brackets i.e 8769 only and once it is found that row should be put in a new sheet.
View 10 Replies
View Related
Oct 3, 2013
I have created a worksheet with 7 Tabs. 6 of the tabs are tables of existing parts and their catalog information. The Front Sheet I want to be a place where people can select data via a drop down or typed in, and in turn have that headsheet display the results of the search.
I have the 6 tabs broken down by part type, and figured those can easily enough be the first choice on my worksheet. So by picking that I can direct excel to which tab we want to run the search on, but ater that I'm drawing a blank.
For an example, say I'm looking for a Elbow that has a 6 size on one end. I would like to use the drop down to choose "Elbows" and then like to select/type 6 in the End 1 size box and have Excel show me all the reslts from the Elbow Tab that match that criteria.
View 4 Replies
View Related
Jul 20, 2009
I have a problem with excel that I have been trying to solve for the past 5 days! I have 2 tables (one with 500 rows, the other with 15000) that contain information about pipes.
The smaller table, Drift List, is to be used as a reference to fill up the bigger table.
Here is how Drift List looks like:
Size NominalWeight WallThickness APIDriftDiameter AlternateDriftDiam.
5.5 14.00 0.244 4.877 7.625
5.8 14.88 0.253 4.915 ----
...
The other table, Pipe Database, Looks like:
Size NominalWeight WallThickness DriftSize DriftType
5.5 14.00 0.244
...
I have to fill up Drift Size using APIDriftDiameter from the first table, BUT if AlternateDriftDiameter is available, I have to use that instead.
DRIFT TYPE column has to indicate either API or Alternate (Depending on which one I have used).
Here are the two files:
[url]
[url]
View 9 Replies
View Related
Jan 18, 2007
I have a sheet named "original" with columns a, b, c. My code checks each cell in column C for a value and then copys columns A,B,C to a sheet named "Order". It works fine except I need it to start pasting the results in row 16 instead of row
Sub PLACEORDER()
Dim lastrow_first As Long
Dim lastrow_second As Long
Dim x As Long
lastrow_first = Sheets("ORIGINAL").Cells(Rows.Count, "C").End(xlUp).Row
For x = 10 To lastrow_first
If Sheets("ORIGINAL").Cells(x, 3) <> "" Or Not IsEmpty(Sheets("ORIGINAL").Cells(x, 3)) Then................
View 2 Replies
View Related
Apr 19, 2013
I'm sure this query has been answered somewhere else but I can't seem to find it. I basically have information in two worksheets in the same workbook which need to be compared and the missing values from one worksheet need to be listed in a message. There are duplicate values in both worksheets so only need a list of the unique missing values. For example:
Sheet1
Column A
1
2
1
5
5
2
3
5
4
Sheet2
Column A
2
3
3
4
3
4
The message box should state that we are missing 1 and 5 from the dataset as it is not in Sheet2. If the list could be sorted in ascending order that would be great too.
View 9 Replies
View Related
