Select Range Of Columns
Jun 26, 2009
I'm in the midst of preparing a Year-To-Date (YTD) simple financial report in MS Excel.
Firstly:
I allow user to enter a number in cell A2.
Secondly:
Cells from A4 - L4 are linked from Sheet1. Cell M4 will give sum of A4:L4. Users are not allowed to change data in cells from A4 - L4. Users are only required to enter a number between 1 to 12 in cell A2. Upon update cell A2, the VBA shall sum the number of columns as entered in cell A2.
For example, if user enter 3 in cell A2 then cell M4 must give sum of A4:C4. If user enter 8 in cell A2 then cell M4 must give sum of A4:H4.
View 9 Replies
ADVERTISEMENT
May 1, 2014
I have below a code that is selecting from A11 down as far as there is data and across a certain number of columns then sets a print area.
Currently the columns go A, B, JW, JX, JY, JZ, KA, KB as C through to JV are hidden. I have tried to offset the columns by 7 to see if it will select A-KB but it is selecting cells that are hidden and only selecting A-G. I need it to go past the hidden columns. Here is the code:
[Code] ......
Could I also get a code to go from A10 and move over to KB and create a range from there e.g. KB-KJ and last row from there?
View 10 Replies
View Related
May 6, 2014
I need a macro to start at cell A11 and select across 10 columns and down to the Lastrow (last row with any data).
There are hidden columns after column D so it CANNOT have any columns hardcoded except for column A.
This selection then needs to be set as a single print area to print out on 1 page. I have already set Rows 1-10 as a title area to print at the top of each page.
Code i currently have is:
[Code] .......
I just need it to now go across 10 visible columns and set as a single print area.
View 8 Replies
View Related
Dec 10, 2013
I have a macro that allows me to select a range of columns and unhide any that are hidden. I am on the sheet "Employees", but the action happens on the sheet "Enter". I can run this macro when I am on "Employees" and jumps top "Enter" and works exactly as I want it to.
Code:
Sheets("Enter").Select
Columns("B:T").Select
Selection.EntireColumn.Hidden = False
Range("M8") = Sheets("Employees").Range("B5")
Range("I7").Select
But when I try to run it as part of another macro that begins on "Employees", I get "Run-time error '1004': Select method of Range class failed", and Columns("B:T") is highlighted.
View 4 Replies
View Related
Jul 30, 2014
Function to select two columns based on the header and the variable given.
Sample excel file attached for your ref.
Excel sample.JPG
Find the excel file in which I am looking for an formula which will look up variable in Col A for Eg USD and search the same in Row 1 and then will select COL D:E and so forth for other currency.
View 4 Replies
View Related
Mar 24, 2013
I have a worksheet in which column A:C contains slno,name etc. Col D contains numerical data.D4:D5 is col heading. D6:D41 contains numerical data. I want to copy the data from D6:D37 only. for this i tried the following but with negative result.
1.select cell D5.
2.press F5 and enter -to goto cell D37.
3. press control and shift and up arrow to select the upper cells. Excel selects from D37 to D4 whereas i want it to be from D37:D6.selecting D6 and then press control shift and enter keys takes me to the last cell with the data in the column, ie,D41.
How can I select only the required cells so that i can copy the content.selecting the first cell and then dragging the cross is not an expected answer to solve this.
View 4 Replies
View Related
Jul 23, 2008
I have this:
Private Sub CommandButton1_Click()
Worksheets("Sheet1").Activate
Range("A1").Select
Selection.End(xlDown).Select
ActiveCell.Offset(rowOffset:=1, columnOffset:=0).Activate
ActiveCell.PasteSpecial
End Sub
it errors to: SELECT METHOD OR RANGE CLASS FAILED
View 9 Replies
View Related
Jul 7, 2008
I want to put a range select statement to select a cell and count down 10 cells and copy.
View 9 Replies
View Related
Oct 4, 2007
I have a command button on sheet MASTER. When the workbook is Activated I want it to check and see if in sheet COSTM, cell B3 there are the words "Project Number", if so then show command button (ClearPrevious), if not, don't show. Also, when the If statement is finished, then the workbook needs to end up showing the sheet MASTER. I have tried various codes and none work, or they are on perpetual loops. I know this has got to be simple, but cannot find an example to take from to solve the issue. Would appreciate any help offered. Below is code I have right now.
Private Sub Worksheet_Activate()
If Sheets("COSTM").Select Range("B3").Select = "Project Name:" Then
Me.ClearPrevious.Visible = True
Else
Me.ClearPrevious.Visible = False
End If
Sheets("MASTER").Select
End Sub
View 9 Replies
View Related
Oct 28, 2008
My workbook holds a month template and sheets for each month. I work on modifications in the template ,but would then like to update all the monthly worksheets. I recorded a macro to show me how to start programming the vb sub, but get a runtime failure 'error 1004 Select method of range class failed' when trying to select the column to copy,
View 4 Replies
View Related
Jan 6, 2010
I'm trying to select a range that will be changing by column. I'm not sure why my syntax isn't working. What I've got:
View 2 Replies
View Related
Jan 27, 2012
I am trying to write code to select a range in a worksheet where the last cell in the range is variable.
Sub DataTest()
Dim LastColumn As Integer
Dim LastRow As Long
Dim LastCell As range
[Code].....
View 8 Replies
View Related
Mar 26, 2013
i want information on my "Intra-op tab" to automatically populate on my "Tissue" tab. In Column "A" of my intra-op tab i enter case id's, 1 per row, and i would enter a date received under column "D". On my "Tissue" tab, i also enter those case id's under column "A" but i would have multiple rows of the same number. I want that whenever i type a specific case id on my "Tissue" tab, it will automatically fill in the date in column "T", the date that coincides with the case id in column "D" of my "Intra-op Kit" tab.
View 1 Replies
View Related
Nov 1, 2012
To select multiple columns I can use Union but can I use something that will cicle through the values from an array?
Example (how do I see this)
VB :
columnsToDelete= array("UM","Post","Pre")
For i=0 To UBound(columnsToDelete)
Set columnsFound=Range("1:1").find(what:=columnsToDelete(i), lookin:=xlvalues,lookat:=xlwhole, matchcase:=True)
columnsFound.select
Selection delete
Next i
View 2 Replies
View Related
Apr 1, 2014
I want to select a number of columns. I know the column indexes.
I want to use something like (Doesn't work):
[Code] ......
Instead of (Works):
[Code] ....
Rows can be selected according to:
[Code] ....
I have written this code that works. But there must be an easier way:
[Code] ....
View 4 Replies
View Related
Sep 15, 2008
I am using VBA to change the format of columns. The code work with 1 column, but In need to change the format of mulitiple columns. E.g Cols 11 to 22. I tried the code below but it does not work!
View 3 Replies
View Related
Sep 27, 2007
an equivalent to the code
rows("8:10").select
for columns. I don't want to use the A, B notation but rather, column numbers.
View 6 Replies
View Related
Sep 28, 2013
I plucked a macro off an old post from here (as I always do), but I'm having trouble tweaking it.
VB:
Sub completedtest()
Dim c As Range
Dim rngG As Range
For Each c In Intersect(ActiveSheet.UsedRange, Columns("i"))
[Code] ....
As it currently stands, the macro selects the entire row of rows containing the letter Y in column I. All I need to change is, I want to simply select columns B through I, rather than the entire row.
View 2 Replies
View Related
Jul 29, 2014
I have a large spreadsheet of species activity data and want to separate information from two columns to create a bar chart of when a certain species is active over a 24-hour period. There are duplicates of each species in one column and a unique corresponding time of activity for that species in another, something like the following:
Species A 23:01
Species B 07:09
Species C 13:45
Species D 08:30
Species A 01:55
Species A 22:07
Species C 15:29
What formula can I enter that only selects Species A and their corresponding times that I can copy into a new spreadsheet?
View 2 Replies
View Related
May 21, 2014
I would like to somehow select and print the used columns in my pivot table.
I currently have a code that prints TableRange2 but this also includes blank pivot tables columns which are not in use.
View 2 Replies
View Related
Jun 30, 2014
Please see attached.
What I would like to do is for each column within range("a1").currentregion that has dates, select the blanks in those columns and put the date 1/1/1900.
The result is in the Result sheet.
I know how to do a standard loop through columns but I'm not sure how to do this for just the current region and just for those columns with dates.
View 2 Replies
View Related
Nov 7, 2008
I need to select all data in columns A:F but the number of row containing data is variable. I need to select only the rows with data.
View 7 Replies
View Related
Nov 18, 2011
My issue is I want to use a for loop to go through a spreadsheet. Within the for loop if a certain condition is true I want it to select all columns from A to AW and merge them together.
Example of what I have so far:
Sub MergeHeaders
dim i as Intger, LastRow as Integer
LastRow = Cells(Rows.Count, "CP").End(xlUp).Row
For i = 1 to LastRow
'Check if the leading character is a letter, not number
If Asc(Cells(i, "AP")) > 64 Then
'I want select from A to AW only for current row i, then merge
end If
next i
end sub
View 1 Replies
View Related
Aug 5, 2009
I am using ADO to select data from a CSV file, column 1 has some duplicate Incident numbers, but the rest of the columns the data may be different but not interested in that so I cannot use SELECT DISTINCT incident, desciption as this applies to all columns
so I tried the following
StrSQL = "SELECT DT.IncidentNumber, ST.Description -
FROM (SELECT DISTINCT IncidentNumber FROM " & StrFile & " ) DT -
INNER JOIN " & StrFile & " ST ON DT.IncidentNumber = ST.IncidentNumber"
however it returns ALL rows, if I use just
SELECT DISTINCT IncidentNumber FROM " & StrFile
I get the rows I am interested in but not the extra data I require
View 9 Replies
View Related
Jun 11, 2013
I have an input box which asks the user to select a row that they wish to delete.
What I need to do is take the row number that has been selected and delete cells B:K and move the below cells up.
View 1 Replies
View Related
Feb 11, 2014
I am currently setting up a userform where one of the options is for an error code (chosen from a listbox) but the user has to be able to select multiple codes. I have the below working if it is NOT multi select, works a dream and goes in the right column.
VB:
If ListBox2.Text = "A1" Then
LastRow.Offset(1, 20).Value = "x"
ElseIf ListBox2.Text = "A2" Then
LastRow.Offset(1, 21).Value = "x"
But as soon as I set it to mutliselect and choose say A1 and A2 neither one writes, I imagine because Listbox2.text is now A1,A2 and not just one or the other.
View 9 Replies
View Related
Feb 3, 2014
I am working on a =transpose function. Pretty simple right? Well now I am trying to have it SKIP/SELECT certain columns.
I have =transpose("date!B1:T1"), but now I want to "Select A,B,D,E,F"
=TRANSPOSE(INDIRECT("date!B1:T1"),"select A,B,D,E,F,G,H,P,Q,R,S,T")
View 1 Replies
View Related
May 12, 2014
I am trying to find a formula that will look at the figures in four columns and then select the lowest for the calculation.
Basically what I am doing is getting venders prices and placing them in the column. The cheapest is then selected.
Showing which vender is used would be a bonus.
View 1 Replies
View Related
Feb 18, 2010
so I have been googling to figure out how to write a macro that will select every other column on my workbook. All that keeps coming up is conditional formatting, which I do not want. I am not trying to highlight the columns in alternating colors, I just want to select them.
I am starting at column F and I would like it to search until the end of the columns and select every other column ending with the last column with data in it.
I know I could search by a specific row and tell it to find the first blank cell then offset it, but there is no particular row that will always have data in it, so I guess it needs to check by column until it finds the first column without any data in all rows and then offset it.
Anyone know what I am talking about here?
I know it should be fairly simple but I couldn't seem to find any answers anywhere else.
Also, anyone know any good websites that have definitions for some basic macros? I'd love to start learning how to write this stuff on my own.
View 7 Replies
View Related
Nov 25, 2011
I'm trying to write some code to select cells in a number of columns on a variable row. I have the following code to define the rownumbers for Cash and Pal:
Columns("G:G").Select
Selection.Find(What:="Total Cash", After:=ActiveCell, LookIn:=xlFormulas, _
LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _
[Code]....
Then I can use the following code to select a cell in a single column:
Range("P" & Cash & ":P" & Pal).Select
but I need to select cells in columns P, R, T, V, X, etc.....
If I was doing this for a fixed rownumber I would use:
Range("P22:P23,R22:R23,T22:T23,V22:V23,X22:X23").Select
but because my rownumber is variable I tried to use:
Range("P" & Cash & ":P" & Pal, "R" & Cash & ":R" & Pal, "T" & Cash & ":T" & Pal, "V" & Cash & ":V" & Pal, "X" & Cash & ":X" & Pal).Select
but this doesn't work giving the Compile error: Wrong number of arguments or invalid property assignments
View 4 Replies
View Related
