Select Specific Values Within Array?
Sep 13, 2010
I am trying to select specific values within an array.I have two tables, weight table and a factor table. These tables are a lot bigger than the example. I am trying to multiple the weights times the corresponding factors and then sum the result in one cell using arrays.
The third table is the result I am looking for. However, I would like to use some type of index/match or choose to get the result but cannot figure out how to do it. A couple of functions that I tried that did not work are next to it.
The index fails because the index function does not output an array (The result of the index function is just 4% instead of {4%,3%,4%}). The choose fails because the choose function does not select values within an array (ie I would have to put each factor as a separate value (F4,G4,H4) rather than the entire array (F4:H4). There are so many factors that I would like to avoid that.)
Sheet3
ABCDEFGH1 2 3NameWeightFactor DateFactor1Factor2Factor34Name125%Factor3 7/1/20105%3%4%5Name235%Factor2 8/1/20107%2%3%6Name240%Factor3 7 8DateReturn Does not work 97/1/20101.04% 4.00%#VALUE! 108/1/20102.65% 3.00%#VALUE!
[Code] .......
Array:
Produce enclosing { } by entering
formula with CTRL+SHIFT+ENTER!
View 3 Replies
ADVERTISEMENT
Aug 23, 2006
I want to get each distinct values from a range (say, c1:c20) and put them into an array for further processing.
View 3 Replies
View Related
May 8, 2013
I have a table like the one below, only it has a few hundreds of rows and columns and I need a solution in order to fill in the blank spaces with 0 and 1 in order to get the total by row and by column. Is there any way to do this with a formula/macro ?
1 May
2 May
3 May
4 May
a
2
b
[code]....
View 4 Replies
View Related
Aug 13, 2007
I have column A with various values in cells.
For instance, DG, GS, HG etc
I wanna do if a cell in column A is equal to DG then select the entire row that contains the cell. then call other sub.
View 9 Replies
View Related
Oct 2, 2008
I have a class module with several private variables, including one that is an array of a user-defined type. I am trying to set the values of a single element of this array with "Property Let ..." from a string array:
View 4 Replies
View Related
Aug 29, 2012
Can I do a select case on an array?
Something like?
Code:
Dim Array As Variant
Dim Range as Range
Array = Array(Worksheets("sheet1"), ("sheet2"), ("sheet3"))
Select Case Array
[Code] ........
View 9 Replies
View Related
Feb 6, 2007
I have a problem with a listbox on a userform. I have an array that is stored in a name. The array has 2 columns and + 1000 rows. It looks like this:
100 Name1
110 Name2
120 Name3
Etc.
The listbox is filled from the array:
Private Sub UserForm_Initialize()
frmZoeken.lstbx_Gbr.Clear
frmZoeken.lstbx_Gbr.ColumnHeads = False
Dim myArr()
myArr = Evaluate("varRekSchema")
frmZoeken.lstbx_Gbr.List = myArr
End Sub
When the form with the listbox opens, it has to select by default the value in the listbox that corresponds with a value in a cell in the workbook:
Private Sub UserForm_Activate()
'On error resume next
frmZoeken.lstbx_Gbr.Value = Cells(ActiveCell.Row, 3).Value
frmZoeken.txt_Zoekterm.SetFocus
End Sub
When opening the userform the following error message appears: Could not set the Value property. Invalid property value.
When I activate the row "On error resume next" the listbox is correctly filled. The error occurs with selecting the default value.
View 9 Replies
View Related
Oct 22, 2013
Question contained within code:
Code:
Dim MyArray(6, 1) As String
Dim i As Integer
'' Array List 1
[Code]....
'If lbxLI = any list index from Array List 1 then use the value stored in Array List 2 to give Listbox 2 its rowsource.
'For example; ListIndex "0" would produce a row source "_0" for listbox 2. Else if ListIndex "1" is selected, produce row source "_1" for listbox 2.
' I would like to achieve this from one "If" statement. I'm guessing it must be possible using a loop, I just can't think how despite a lot of messing about with code.
View 1 Replies
View Related
Apr 23, 2014
I am calculating multiple Correlations for long lists of data. I want the correlation based on the value in a given column. In the below example I would like a different correlation for each value in colA and the correlation will be between colC and colD. ColB lists the different people whose data are used for the correlations. In actuality there are 30 or more people for each test. In every case ColC is the same for a given value of ColB (although I doubt that matters). The number of people taking each test varies. I would like a correlation of ColC an ColD for each value of ColA.
Simplified version of my data
ColA ColB ColC ColD
Test1 Fred .75 1
Test1 Max .80 0
Test1 Sara .90 1
Test2 Fred .75 1
Test2 Max .80 1
Test2 Sara .90 0
....
Test100 Fred .75 1
Test100 Max .80 1
Test100 Sara .90 1
View 6 Replies
View Related
Feb 11, 2013
I need to query table contents where some general items are met, and item id's are not contained in an array.
Example:
Code:
SELECT LOOKUP.*, LOOKUP.Var FROM LOOKUP WHERE ((LOOKUP.Name)="test" Or (LOOKUP.Name)="test2" AND ((LOOKUP.Type)=3) AND ((LOOKUP.Var) ("array", "of", "items")))
I need to know how to add an array to a query since I can't hard-code the list each time, and the array can be a different size each time, so using array variables doesn't make sense here.
View 9 Replies
View Related
Jul 7, 2006
I am trying to assign an array element to select a specific cell then assign a value to it. Below is the general code that I am working with. Does anyone know why this is not working?....
View 8 Replies
View Related
Feb 17, 2008
I have a problem with the following code.
I want to select multiple rows in a very huge spreadsheet. But, when I
use this code, I receive an error: Runtime error 1004, Method ' Range'
of Object '_global' failed. What is wrong? Or maybe there is other
better way to select automatically empty rows in a spreadsheet?
Public Sub delhol()
'
' delhol Macro
'
' Keyboard Shortcut: Ctrl+d
'
Dim k As Variant
Dim rr As String
k = Array(34, 35, 38, 39, 40, 77, 133, 182, 207, 209, 225, 226, 295,
299, 300, 338, 394, 437, 468, 470, 480, 481, 560, _
591, 599, 655, 712, 729, 746, 755, 756, 852, 860, 962, 990, 1005,
1006, 1077, 1081, 1082, 1083, 1114, 1176, _
1217, 1252, 1260, 1261, 1338, 1342, 1343, 1344, 1375, 1381, 1437,
View 4 Replies
View Related
Mar 26, 2013
How would you select all cells in a column that contain #N/A in them, all at once so I can delete them from my column?
View 4 Replies
View Related
Feb 24, 2009
I have an Excel 2003 spreadsheet, and in certain cells, I have a single letter. (e.g.) In A1, I have the letter A, in B1, I have the letter B etc.
I am trying to write a macro which will allow me to select a specific row, and depending on which letter is in which cell, set the cell directly below it to the numeric equivalent of the letter (e.g.) if in cell A1, there's the letter A, I want the number 1 in cell A2; and if in cell E5, there's the letter Z, I want the number 26 in cell E6 etc.
All I've got, is a VERY long macro, which will take row 1, and change each cell value to it's numerical equivalent. Here's an extract:
For Each cell In ActiveSheet.Range("A1:Z1")
If (cell.Value = "A") Then
cell.Value = "1"
End If..................
View 9 Replies
View Related
Nov 19, 2013
I am trying to do something that sounds fairly straightforward but have not been able to achieve the final result.
I have a sheet which has multiple range addresses stored in different cells and so far I have been able to pass the Range address to Range variables by looping through a range array. Now I would like to select these multiple ranges. My code looks as below;
VB:
Dim Cnt As Integer
Cnt = Sheets("Sheet1").(Range("1040").Value ' Cnt holds the the total number of ranges to be specified in Sheet1
Dim RStr(1 To 80) As String ' This will hold the range addresses specified in Sheet1 in cells C1041 to C1120. Upto 80 range addresses could be specified.
[SIZE=2] Dim Rng(1 To 80) As Range ' This will store the ranges based on the range addresses stored in RStr()
Dim i, j As Integer,
[Code]...
I am not sure on how to select multiple ranges using range array hence tried Union() however it is obviously not correct and throws an error.
View 2 Replies
View Related
Sep 28, 2013
I plucked a macro off an old post from here (as I always do), but I'm having trouble tweaking it.
VB:
Sub completedtest()
Dim c As Range
Dim rngG As Range
For Each c In Intersect(ActiveSheet.UsedRange, Columns("i"))
[Code] ....
As it currently stands, the macro selects the entire row of rows containing the letter Y in column I. All I need to change is, I want to simply select columns B through I, rather than the entire row.
View 2 Replies
View Related
Jun 1, 2014
i am trying to figure out a vba code to select the last cell in column C that contains "Cgy".
View 3 Replies
View Related
Oct 3, 2008
is there a way to use VBA and select a specific print area.
i want only up to column 'z' and to select from row 'a' to the final row with data in it.
View 6 Replies
View Related
Nov 29, 2008
I am trying to use vba to give a combo box focus only when cell D2 (a cell merge of d2,d3 and d4) changes.
So, If I enter a number in cell D2 and hit ENTER or use one of the arrows I want the combo box to get selected (get focus). I don't want this action to take place when other cells are acted upon this way. ONLY D2.
View 6 Replies
View Related
Nov 20, 2012
i just want to select first four column cells(A,B,C,D) in first row after filte the data.
View 1 Replies
View Related
Oct 8, 2013
I need a macro that will select row 15 in the active column. (basically returns to the top of the data where rows 1-14 are frozen in place, only in the current column).
I have been able to accomplish the opposite (skip to specific column while maintaining active row) by using the code below:
Range("V" & (ActiveCell.Row)).Select
But it does not work when I try the reverse:
Range((ActiveCell.Column) & "15").Select
View 3 Replies
View Related
Sep 5, 2009
In one column I have different objects separated by a comma. I need to select one of these: 11,20,30,60,61 and copy it into another column. I have used this
For counter = 0 To not_empty_cells
For counter_dep = 1 To 5
position = InStr(1, (Cells(counter + 3, 4)), department(counter_dep))
If position > 0 Then
symbol_dep = Mid(Cells(counter + 3, 4), position, 2)
Cells(counter + 3, 10).Value = symbol_dep
End If
Next counter_dep
Next counter
It works, however, once in the first column there are the following objects: 60,6128,CZ, it takes 61 but it should take 60. Unfortunately, the position of the object can vary, it is not always on the first position.
View 9 Replies
View Related
Mar 29, 2013
I am trying to use the below code to fill a combobox with unique values. It works great except I can't figure out a way to replace BLOCK 1 with BLOCK 2. I want to use BLOCK 2 to populate mgNames so that only specific values are filled into mgNames. Currently BLOCK 1 just fills mgNames with an entire range without any conditions. how I can get BLOCK 2 to work in the way i'm intending it to?
Code:
Sub findNames()
Dim mgNames As Variant
Dim myCollection As New Collection
[Code]....
View 4 Replies
View Related
Jul 30, 2014
I have this code:
Code:
Private Sub CommandButton2_Click()
Dim myarr() As String, size As Integer, i As Integer size = WorksheetFunction.CountA(Worksheets(1).Columns(2))
user = Environ("username")
[Code]...
when the FOR-LOOP finds the username inside the column B (many times will have more than one result) I would select all the rows that have this username and display that data into a listbox but not only the rows that have the username but also I would like to get the next column C and D in the same row and display all those data into a listbox.
ID
username
date
status
1
usuario1
25/01
ok
[Code]...
taking the table above as example I have USUARIO2 twice in the column B so I would like to get that row and also the DATE and the STATUS from this USUARIO and display it in a listbox. If I'm the USUARIO2 and I click in the button Then I will have a listbox like this:
USUARIO2
26/01
denied
USUARIO2
27/01
ok
What should I add into my code to get this result?
View 5 Replies
View Related
Feb 13, 2010
Feedback.xls is the file I want to have my macro run in. By pushing a button to run the macro, it will prompt the user to select where their file is on their computer. This file will have different file names based on the end user. For example sake, I've included CAP.xls.
After the user selects their file, it will prompt them to choose which tab to copy and paste data from. Typically, there will be 30+ tabs on their worksheet. For example sake, I've created 5 tabs on CAP.xls. The tabs in their workbook will be labeled as I have labeled mine, M1 CAP, M2 CAP & M3 CAP. Therefore, it should prompt the user to select which tab to choose from.
After the user selects their tab (M1 CAP, M2 CAP, M3 CAP), the macro should prompt the user to choose which row of information to copy. In CAP.xls, I have a few rows of information to choose from. They all start with FY10A1, FY10A2, FY10A3, but this information could change. Once they select the row, it will copy each of those fields onto the respectively labeled fields on Feedback.xls.
View 5 Replies
View Related
Oct 24, 2011
The issue I am having is that the code fails if there is ever a "sheet2" left open. I need it to always target the sheet Data5m.
What seems to happen is the sheet targets the first available sheet. This book only consists of 1 sheet, but generates other sheets later, sometimes extra sheets are left open.
Microsoft Excel Objects - This Workbook code
'The following is for the Userform DataReport code
DataReport.ComboBox1.Clear
Columns("N:N").Select
Range("A2:HX29921").Sort Key1:=Range("N2"), Order1:=xlAscending, Header:= _
xlGuess, OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
Data5m.Range("A1").AutoFilter
Call FillCombobox(Data5m.Range("N2", Data5m.Cells(Rows.Count, "N").End(xlUp)), DataReport.ComboBox1)
DataReport.Show
End Sub
Forms - DataReport
Code:
Private Sub ComboBox1_Change() 'was A, now N
DataReport.ComboBox2.Clear
If Data5m.FilterMode = True Then: Data5m.ShowAllData
Data5m.Range("A1").AutoFilter field:=14, Criteria1:="=" & DataReport.ComboBox1.Value
Call FillCombobox(Data5m.Range("X2", Data5m.Cells(Rows.Count, "X").End(xlUp)).SpecialCells(xlCellTypeVisible), DataReport.ComboBox2)
[Code] ..........
View 1 Replies
View Related
Nov 28, 2012
I have been trying to write VBA which basicly search for specific value in column A and copy values from that cell to down and two columns next. Select row and columns down after specific value in column A was find.
Like this
A B C
... ... ...
X 100 115
... ... ...
up to last row
I try with VBA below but it do not works.
Sub Select_Rows_GK()
Dim LR As Long, i As Long
LR = Range("A" & Rows.Count).End(xlUp).Row
For i = 1 To LR
If Range("A" & i).Value = "9000" Then
Range("A" & Rows.Count).Offset(0, 1).Select
Do While Not IsEmpty(ActiveCell)
ActiveCell.Offset(0, 1).Select
Loop
Exit For
End If
Next i
End Sub
View 3 Replies
View Related
Feb 3, 2014
Lets say I need an array of 100 numbers from zero to 100. I want a mean of 75, and SD of 12. Or the same data based on a skewness and kurtosis value. Can I do that in Excel?
I'm just generating fake datasets for my stats class to analyze.
Edit: I found that =norminv(rand(),,) will work.
View 1 Replies
View Related
Jan 22, 2009
I want a macro that if a certain cell on a row in column F on my worksheet is "6" then copy the cell in columns B and H on the same row are to be copied into an array and then when the loop is done, display the copied cells in a msgbox.
Is there a simpler way to do this without fidgeting with an array?
View 5 Replies
View Related
Jun 11, 2014
I am using arrays to try and move select data in a row between workbooks. I read in the data to an array, I set the value of the range I want to write to to the array. That part works well.
However, the range I am trying to write to is part of an Excel Table (ListObject). There are formulas in that table that I need to keep as formulas. I know (well, believe) that if I populated the data into the array manually and skipped over the formula cells it would not change those cells at all.
How can I (after populating the entire array with data) go back and say "The data at index 3 is really nothing, so exclude it."
I've tried setting the value to Null, Empty, and vbNullString. My array is currently typed as a Variant.
Example:
myArray = Sheet1.Range("A1:A10").Value
myArray(3) = ????????
Sheet2.Range("A1:J1").Value = Application.Transpose(myArray)
View 3 Replies
View Related
