I am trying to use vba to give a combo box focus only when cell D2 (a cell merge of d2,d3 and d4) changes.
So, If I enter a number in cell D2 and hit ENTER or use one of the arrows I want the combo box to get selected (get focus). I don't want this action to take place when other cells are acted upon this way. ONLY D2.
I want to make a combo box in excel that, if i select it the sheet inside the combo box will appear.
Example:
Inside of combox are: Sheet1
Sheet2
Sheet3
If i click combo box and i choose sheet3 the sheet3 will appear.
How can i do this? theirs a macro code to use?
I would like to change a combo box back to a specific value, based on a change in C4.
So no matter what happens, if c4 changes at all, the value in the combo box gets reset....
I have column A with various values in cells.
For instance, DG, GS, HG etc
I wanna do if a cell in column A is equal to DG then select the entire row that contains the cell. then call other sub.
i need is a macro that once run selects a certain (or multiple) comboboxe's values. Eg I select macro 'test' and it selects value 1 on combo box 1, value 2 on combo box 2 etx..?
View 2 Replies View RelatedI currently have a spreadsheet with about 30 graphs, and when I am done there is going to be about double that.
I want to make one sheet, with a combo box that allows me to select which graph to display, so that users don't have to cycle through a large number of tabs.
I have seen this done before, but can't figure out how to do it. The extent of what I know is making a combo box and selecting the data range for the options to select in the combo box.
I have a do/loop to fill my combo box with values from a sheet (works fine) , but how do I force the first value to display (as a default)?
View 9 Replies View RelatedI have 2 combo box: the first one is called combo box1 and the 2nd one is called combo box2. I simply want whenever a name is selected from combo box1; i want a Grand Total to be selected automatically from Drop Down box2. I have several names in the Combo Box2 and Grand Total is always the last. So note that the list of names in Combo Box2 is dynamic and they keep changing all the time. I have attached a sample for more details.
View 2 Replies View RelatedI've created a user form (click button on 'main page' to display). Combo Box called 'Last name' gets populated with all second names from the sheet 'Staff'
When a user selects a second name from the drop down list, I would like excel to automatically update the list box 'First Name'. Also, If a user changes the first name or Last Name, this should be saved
I have created a user form using the addins that come with excel to create a calendar that will allow the user to select a date and automatically put that in a specific cell. My system is office 2000.
The code is as follows:
Private Sub OK_Click()
Dim i As Integer
Dim myCell As Range
i = 0
For Each myCell In Selection
myCell.Value = Calendar1.Value + i
i = i + 1
Next myCell
Unload Me
End Sub
Now, I gave it to my boss who has xp, and I get the following VB error when she chooses a date and clicks on the ok button:
Method 'Value' of object 'ICalendar' Failed
I have a client list in a table in my excel sheet. I currently enter the clients in a sheet that looks similar to a form. After the clients info is in this Form I have a button with a macro to copy the client info into a table on another sheet. This works perfectly.
Now I have another form that will retrieve the customers info in a click of a button in order to make changes to the client. Ei:I now have a second phone number and I want to update that client's info. What I want to do from here is take the info in Cell B2 (clients full Name), Do a vLookup in the "Saved Clients Table" in a Range within my table range. (Range: Saved Clients and the client's full name is in $A:$A and called "Clients Full Name" and once that name is found I need to select the cell in column C and the corresponding row.
This will allow me to copy the info in my form, Paste it in Transpose to the cell that is selected. (I already have that code)
Here are screenshots of what I am trying to accomplish. [URL] .......
The first combo box is on a userform so that a subject can be selected
View 3 Replies View RelatedHow would you select all cells in a column that contain #N/A in them, all at once so I can delete them from my column?
View 4 Replies View RelatedI have an Excel 2003 spreadsheet, and in certain cells, I have a single letter. (e.g.) In A1, I have the letter A, in B1, I have the letter B etc.
I am trying to write a macro which will allow me to select a specific row, and depending on which letter is in which cell, set the cell directly below it to the numeric equivalent of the letter (e.g.) if in cell A1, there's the letter A, I want the number 1 in cell A2; and if in cell E5, there's the letter Z, I want the number 26 in cell E6 etc.
All I've got, is a VERY long macro, which will take row 1, and change each cell value to it's numerical equivalent. Here's an extract:
For Each cell In ActiveSheet.Range("A1:Z1")
If (cell.Value = "A") Then
cell.Value = "1"
End If..................
I plucked a macro off an old post from here (as I always do), but I'm having trouble tweaking it.
VB:
Sub completedtest()
Dim c As Range
Dim rngG As Range
For Each c In Intersect(ActiveSheet.UsedRange, Columns("i"))
[Code] ....
As it currently stands, the macro selects the entire row of rows containing the letter Y in column I. All I need to change is, I want to simply select columns B through I, rather than the entire row.
i am trying to figure out a vba code to select the last cell in column C that contains "Cgy".
View 3 Replies View Relatedis there a way to use VBA and select a specific print area.
i want only up to column 'z' and to select from row 'a' to the final row with data in it.
I am trying to select specific values within an array.I have two tables, weight table and a factor table. These tables are a lot bigger than the example. I am trying to multiple the weights times the corresponding factors and then sum the result in one cell using arrays.
The third table is the result I am looking for. However, I would like to use some type of index/match or choose to get the result but cannot figure out how to do it. A couple of functions that I tried that did not work are next to it.
The index fails because the index function does not output an array (The result of the index function is just 4% instead of {4%,3%,4%}). The choose fails because the choose function does not select values within an array (ie I would have to put each factor as a separate value (F4,G4,H4) rather than the entire array (F4:H4). There are so many factors that I would like to avoid that.)
Sheet3
ABCDEFGH1 2 3NameWeightFactor DateFactor1Factor2Factor34Name125%Factor3 7/1/20105%3%4%5Name235%Factor2 8/1/20107%2%3%6Name240%Factor3 7 8DateReturn Does not work 97/1/20101.04% 4.00%#VALUE! 108/1/20102.65% 3.00%#VALUE!
[Code] .......
Array:
Produce enclosing { } by entering
formula with CTRL+SHIFT+ENTER!
i just want to select first four column cells(A,B,C,D) in first row after filte the data.
View 1 Replies View RelatedI need a macro that will select row 15 in the active column. (basically returns to the top of the data where rows 1-14 are frozen in place, only in the current column).
I have been able to accomplish the opposite (skip to specific column while maintaining active row) by using the code below:
Range("V" & (ActiveCell.Row)).Select
But it does not work when I try the reverse:
Range((ActiveCell.Column) & "15").Select
In one column I have different objects separated by a comma. I need to select one of these: 11,20,30,60,61 and copy it into another column. I have used this
For counter = 0 To not_empty_cells
For counter_dep = 1 To 5
position = InStr(1, (Cells(counter + 3, 4)), department(counter_dep))
If position > 0 Then
symbol_dep = Mid(Cells(counter + 3, 4), position, 2)
Cells(counter + 3, 10).Value = symbol_dep
End If
Next counter_dep
Next counter
It works, however, once in the first column there are the following objects: 60,6128,CZ, it takes 61 but it should take 60. Unfortunately, the position of the object can vary, it is not always on the first position.
Feedback.xls is the file I want to have my macro run in. By pushing a button to run the macro, it will prompt the user to select where their file is on their computer. This file will have different file names based on the end user. For example sake, I've included CAP.xls.
After the user selects their file, it will prompt them to choose which tab to copy and paste data from. Typically, there will be 30+ tabs on their worksheet. For example sake, I've created 5 tabs on CAP.xls. The tabs in their workbook will be labeled as I have labeled mine, M1 CAP, M2 CAP & M3 CAP. Therefore, it should prompt the user to select which tab to choose from.
After the user selects their tab (M1 CAP, M2 CAP, M3 CAP), the macro should prompt the user to choose which row of information to copy. In CAP.xls, I have a few rows of information to choose from. They all start with FY10A1, FY10A2, FY10A3, but this information could change. Once they select the row, it will copy each of those fields onto the respectively labeled fields on Feedback.xls.
The issue I am having is that the code fails if there is ever a "sheet2" left open. I need it to always target the sheet Data5m.
What seems to happen is the sheet targets the first available sheet. This book only consists of 1 sheet, but generates other sheets later, sometimes extra sheets are left open.
Microsoft Excel Objects - This Workbook code
'The following is for the Userform DataReport code
DataReport.ComboBox1.Clear
Columns("N:N").Select
Range("A2:HX29921").Sort Key1:=Range("N2"), Order1:=xlAscending, Header:= _
xlGuess, OrderCustom:=1, MatchCase:=False, Orientation:=xlTopToBottom, _
DataOption1:=xlSortNormal
Data5m.Range("A1").AutoFilter
Call FillCombobox(Data5m.Range("N2", Data5m.Cells(Rows.Count, "N").End(xlUp)), DataReport.ComboBox1)
DataReport.Show
End Sub
Forms - DataReport
Code:
Private Sub ComboBox1_Change() 'was A, now N
DataReport.ComboBox2.Clear
If Data5m.FilterMode = True Then: Data5m.ShowAllData
Data5m.Range("A1").AutoFilter field:=14, Criteria1:="=" & DataReport.ComboBox1.Value
Call FillCombobox(Data5m.Range("X2", Data5m.Cells(Rows.Count, "X").End(xlUp)).SpecialCells(xlCellTypeVisible), DataReport.ComboBox2)
[Code] ..........
I have been trying to write VBA which basicly search for specific value in column A and copy values from that cell to down and two columns next. Select row and columns down after specific value in column A was find.
Like this
A B C
... ... ...
X 100 115
... ... ...
up to last row
I try with VBA below but it do not works.
Sub Select_Rows_GK()
Dim LR As Long, i As Long
LR = Range("A" & Rows.Count).End(xlUp).Row
For i = 1 To LR
If Range("A" & i).Value = "9000" Then
Range("A" & Rows.Count).Offset(0, 1).Select
Do While Not IsEmpty(ActiveCell)
ActiveCell.Offset(0, 1).Select
Loop
Exit For
End If
Next i
End Sub
Select Specific Cells And Transfer This Data Into A New Row In A Different Worksheet, how can I do this in a macro?
I am trying to pull a select 6,048 rows out of 288,000 rows.
I am trying to select specific cells and transfer this data into a new row in a different worksheet. The code i am using i used sucessfully on a user form to take the entries from text boxes and place in a row in a new worksheet. I would like to try and do the same thing but on a worksheet rather than a user form. My code is
View 2 Replies View RelatedI am having a problem with a sumproduct strand. I've written 4 different ways to no avail. What I'm trying to accomplish is to select specific the sum of various lines of data that fit within 3 parameters
1.) =SUMPRODUCT((Sheet1!$H:$H="XYZ"),(Sheet1!$G2:$G136="Withdrawal"),(Sheet1!$I2:$I136="113183"),Sheet1! $K2:$K136)
Response: #NUM!
2.)=+SUMPRODUCT(--(Sheet1!$H2:$H136='Sheet2'!$A$5),--(Sheet1!$G2:$G136="Withdrawal"),--(Sheet1!$I2:$I136='Sheet2'!$B$5),Sheet1!$K:$K)
Response: #Num!.................
Is there any way to select specify month of the many years of data with any function?
View 7 Replies View RelatedI am looking for the code that I would use so that when the workbook is opened it would always open with "Main" sheet.
View 4 Replies View RelatedI have a worksheet "database" which is database of patient information in each row, in column H I have the "pateint IP number" I have a userform for search and copy. The textbox in the userform is "search_tb1", where I would input the required IP number and search in column H for a match, which should intern select the entire row of this selected cell and paste in another worksheet "preview" in row 2.
View 1 Replies View Related