I need a macro that will select row 15 in the active column. (basically returns to the top of the data where rows 1-14 are frozen in place, only in the current column).
I have been able to accomplish the opposite (skip to specific column while maintaining active row) by using the code below:
Range("V" & (ActiveCell.Row)).Select
But it does not work when I try the reverse:
Range((ActiveCell.Column) & "15").Select
I want a simple macro which will go to the cell in row one in the active cell's column
View 2 Replies View RelatedI have the following code Range("M402").Select
This very simple code brings me to M402 everytime I click on the button.
However, I would like to stay in the same column that I am at the moment when I click the button, and go to row 402. (i.e. if I am in cell "Z56", I would like to be redirected to "Z402" when I click the button.
I'm trying create a macro to enter a series of forumula's in a series of rows in whatever column is currently selected (or column which has a cell selected). IE if the active cell is C5 I want "=A1+B1" copied to C10 of it was AA43 selected I'd want "=A1+B1" copied to AA10. Have done this with setting a row as a variable, but whenever I've defined the column as one it comes out as a numeric value. and gives me "method range of object global failed"
View 3 Replies View RelatedI have a spreadsheet with my Periods along row 10. e.g. C10: "1", D10: "2", E10 "3", F10: "4", G10: "5" etc. (green on the attached sheet). I have my departments along column B, e.g. B11: "Baked" B12: "Fresh" B13: "Frozen" (yellow on the attached sheet)
what I need and cannot work out is some VBA code that will populate two variables (lets call them Period & Department) when I click on one of the figures. For example if I click on cell: if I click E14: Period would have the contents of cell E10, and Department the contents of cell B14.
if i click G14: Period would have the contents of G10, and Department the contents of cell B14 again. I know how to get the click on the cell to work properly etc, and I have code to slot these variables into that works very nicely, I just can't get this bit to work!!!!
I am making a spreadsheet in which I have been asked to have certain column greyed-out based on an answer that was given in a dropdown menu. Specifically, a dropdown menu in column D asks if the client was a Youth or an Adult. Depending on what the anwer is, other columns in the spreadsheet will be greyed-out; different ones for each answer. My problem is, I need this to occur for the active row being editted. For example: The first row that the user can input data into is row 4. If D4 is answered with "Adult" then certain other columns are greyed-out. However, if the next time the user updates the spreadsheet with information for a different client (now entering information in row 5) and they select "Youth" for column D5, then different columns get greyed-out. The columns that are greyed-out will depend upon the answer for the dropdown menu in column D for whatever row is actively being editted.
View 5 Replies View Relatedi am trying to figure out a vba code to select the last cell in column C that contains "Cgy".
View 3 Replies View RelatedIn the attachment is a file, which allows me to specific a Column and hide. For Example enter "H" in the InputBox and Submit the Column "H" is hide.
What do i have to change in the code if i want to hide the "H" and the Column two columns next to "H". In this case "J".
HideColumn.xlsm
I have a worksheet "database" which is database of patient information in each row, in column H I have the "pateint IP number" I have a userform for search and copy. The textbox in the userform is "search_tb1", where I would input the required IP number and search in column H for a match, which should intern select the entire row of this selected cell and paste in another worksheet "preview" in row 2.
View 1 Replies View RelatedI am trying to select the active row and the next 21 rows down, so in all 22 rows should be selected after the macro runs.
View 4 Replies View RelatedI've manage to do this a while ago, unffortunaly my hard drive got damaged.
View 3 Replies View RelatedI need to select the row for the active cell without using an explicit RC address. I don't seem to be able to make the syntax work.
View 2 Replies View RelatedI am trying to select a shape in a cell and place a cell reference into the shape. I know the cell address, but do not know the shape reference. (The row that the cell and shape reside came from copying the row from another sheet and inserting it into the current sheet). I can not seem to come up with the correct code to accomplish this. Right now I have:
Cells(r + 1, 48).Select
ActiveCell.Shapes.Select
ActiveShapes.Formula = "$AW:" & r + 1
Where r+1 is the row where the line finally resides after insertion and "AW" is the column to the right of the cell where the shape resides.
I have tried to put the cell reference into the shape at the location where it is copied from but the reference is not dynamic and I can not seem to get it to be. Another issue that will arise is that the rows in the new sheet will probably be sorted and I question if the cell reference will follow the shape's new location.
Using vba how do I tell a macro to select the row that the active cell is in?
I'm just using a basic delete Row macro but I'd like for the macro to automatically select the entire row when it's time to delete instead of me highlighting the section.
If statement, any way where I can, when I run the macro, choose active cell?
Ex.
Start macro
and it will ask for active cell,
check if active cell higher then 0
then set cell to color red
I have this atm:
Code:
Sub LookForValue()
' Declare Current as a worksheet object variable.
Dim Current As Worksheet
' Loop through all of the worksheets in the active workbook.
For Each Current In Worksheets
[Code] .........
What is the difference between the two ?
When should I use each one ?
I have multiple excel workbooks open at the same time. I need to run a macro on one of them every 15 min but I need to return to the active window when the macro is done. How do I read what window is active then return to it when the macro is done?
Sub AutoSave()
dTime = Now + TimeValue("00:15:00")
Application .OnTime dTime, "AutoSave"
Windows("data.xlsm").Activate
Sheets("Data").Copy
Application.DisplayAlerts = False
ActiveWorkbook. SaveAs Filename:="c:excel" & Format(Time, "hhmmss"), FileFormat:=xlCSV
ActiveWorkbook.Close
Application.DisplayAlerts = True
Windows(1).ActivatePrevious
End Sub
So for example if I have a1, a5, and a6 selected, I want to be able to select row 1, 6, and 7 in one action. Is there a hotkey for this, and if not what macro could I use?
ActiveCell.EntireRow.Select only gives me one row. I want to be able to select all of them at once.
I want my code to evaluate each cell in column B, and based on its value, copy the row from D to X and paste on the newly activated worksheet. I'm trying to use Offset, but it's not working.
View 6 Replies View RelatedI have data that i import on a daily basis, the data can range from a couple of rows to thousands,
What I need to do using VBA is select the active cells, where cells in row ''G'' is blank then delete the entire row where that cell is.
I have column A with various values in cells.
For instance, DG, GS, HG etc
I wanna do if a cell in column A is equal to DG then select the entire row that contains the cell. then call other sub.
I'm trying to select a range of cells whereby the range is dependent on the currently active cell. I know you can use the "Activesheet.Range("A1:D2").select" method to select a range where the cells are always the same, but I'm after a dynamic selection where the values can be programmatically altered depending on some other result.
For example, let's say that I make a certain cell active (based on the result of some other formula), and I want to select the range of cells in the adjacent column that is X rows deep. Putting this into context, imagine the resultant active cell is B2, I then want to select the range C2:C10, but if the active cell is E10, the range selected would be F10:F18 (if active cell is X, then range would be Y:Z).
The Offset function would allow me to position the cell based on the current active one, but it doesn't let me select a range. The Range function only lets you choose either hard coded or index cells, e.g. "Range(cells(y,z), cells(y,z)).select", but this is still no good because I'd need to know the index value of the active cell (can this be done?).
A custom UserForm pops up when a cell is double-clicked. The form contains a ListBox that presents the user with a list of values to select. When the UserForm first pops up I want the item that matches the value of the activecell to be highlighted/selected.
View 8 Replies View RelatedI RECORDED THIS MACRO BUT I WILL LIKE TO MAKE TO AUTO SELECT THE ACTIVE CELL RANGE IS VARIABLE ON MY REPORTS MY CODE
Sub FORMAT_AS_A_TABLE()
ActiveSheet.ListObjects.Add(xlSrcRange, Range("$A$1:$L$1900"), , xlYes).Name = _
"Table1"
Range("Table1[#All]").Select
ActiveSheet.ListObjects("Table1").TableStyle = "TableStyleDark5"
End Sub
I am trying to select a group of cells in an inactive worksheet from code in a module but I keep getting a run-time error 9 message and I cant seem to find the syntax problem.
I pasted my code below and the error occurs in the last line before the end sub statement.
[Code].....
I could use some assistance in creating a macro that will delete all and only text boxes on the active sheet. Some text boxes will be empty, but I still wish for them all to be deleted. Through searching the forums I see a similiar code, but it deletes all shapes on the active sheet:
View 8 Replies View RelatedI'm trying to find a way to use a macro to extract data from a specific column from Sheet1 based on the columns header/title and copied into Sheet2 into the respective column with matching header/title.
For instance, in Sheet1:
Chicken
Cow
Donkey
Pig
[Code]....
So the above table would be the result i'm aiming for.
NOTE, its not different workbooks. I'm looking for sheet to sheet macro.
I've attached a file as well if someone wants to have a go at it. There are no codes in it.
i'm trying to delete a specific type of chart from the active sheet using this macro:
View 2 Replies View RelatedI have searched the FAQ's but have not found a suitable answer to my problem. I have some code that works perfectly when it is run from the VB Editor but when I put it behind a command button it gives me an error almost straight away. I have read that when a command button is used the command button defaults the active sheet to the one that it is one therefore you always have to specify the active sheet but I have done this so am still confused as to why it is falling over. Below is my code, I have commented where it is tripping:
Sub FormattingAcutalReport()
Workbooks.Open Filename:="H:Risk ReportingDaily TemplatesMF Consolidated Risk DAILY LIVE DATA FROM BO.xls"
Workbooks.Open Filename:="H:Risk ReportingDaily TemplatesDaily Non Banks LIVE.xls"
Dim myBorders() As Variant, item As Variant
Set SEGNSEG = Workbooks("Todays Reports.xls").Worksheets("Seg and Non Seg Bank Summary")............................
How do I write a vba code to print active sheet to pdf, auto save in specific folder then mail using outlook
im using 'Nitro PDF Creator'
also id like it to automatically save the pdf as the same file name as the active worksheet and also auto enter the following when opening the email server:-
Address: Cell D18
Subject: Cell D21
Email body:
find attached quotation
Optional installation available on request