Macro That Copies Unpredictable Generated Range So Can Paste In Other Programs
Apr 29, 2014
I have a macro that copies rows from my DAILY OCCURENCE sheet that have a YES in them to my MANAGER SUMMARY SHEET and G1 is selected which has a hyperlink that opens a new email with the manager's email address and Subject pre-assigned.
I then have to manually go back to the newly generated summary sheet and select the cells and paste them into the email that was just opened.
Is there a way that the generated rows are already copied in memory and all i have to do is CTRL+V into the new email, or even better, the cells are pasted in the email automatically? So basically either the information being copied over stays in memory, or after it is copied into the summary sheet it is copied again. I just dont know how to copy unpredictable ranges generated by macros.
The code that generates my summary sheet for my manager is below.
[Code] ...........
View 4 Replies
ADVERTISEMENT
May 8, 2007
I'm looking for information on building a macro that will automate making copies of a spreadsheet into another workbook that contains very particular information. My master sheet has lists of my customers and the rep's that service them. What I need to do is have macro buttons for each rep. that will pull all the shops that they service and all information for these shops into another spreadsheet.
View 9 Replies
View Related
Oct 1, 2013
I am trying to have a macro that separates a list with unique values in column a, copy the results, open a file name in column AG, and then paste the copied stuff into the open workbook.
Currently, it runs, but when I copy to the new sheet, the thing I want goes where I want it to, but I also get an extra sheet1. how can i change this so the sheet1 doesn't get pasted in?
Sub MC()
Dim r As Long, rng As Range, ws As Worksheet
Application.DisplayAlerts = False
Application.ScreenUpdating = False
ActiveSheet.Name = "Sheet1"
With Sheets("Sheet1")
Sheets.Add().Name = "temp"
[code]....
View 1 Replies
View Related
Nov 12, 2009
I have a data sheet like so:
A B
Name Grade
Jim 82%
Bob 90%
Kelly 71%
June 95%
And I also have two cells which are designated as the low and high range. (ie C1 = 85% and C2 = 100%). I need help with the macro for the button that will copy only the rows to a new sheet that fit within the range. So in the example above, pressing the button will create this in a new sheet:
A B
Name Grade
Bob 90%
June 95%
View 2 Replies
View Related
Sep 14, 2008
I've found afew examples off google searches, but my attempts to edit them arent working...
i want a macro to copy a range, say a1:e5, and paste the values and fonts/boarders/etc (ie no formulas) into a new workbook
the ones i found copy a whole sheet, i just want a portion....
View 9 Replies
View Related
Sep 25, 2009
I have several worksheets( Named 1, 2, 3,4,5) in a book containing data , the amount of rows for every sheet is variable depending on the job. I would like a macro that copies the data from the first of the worksheets and paste it in a blank one(lets call it Results), then copy the data from the worksheet two immediately below and do the same with data contained in worksheets 3,4,5.
View 9 Replies
View Related
Aug 14, 2007
I am have some code that takes values from a range (sourceAll) defined on my worksheet as:
Set sourceAll = Workbooks(pathnm).Worksheets(m).Range("A1", "S34")
I'd now like to be able for the range to be generated dynamicaly, but my problem is that the far right column (S) does not always have a value for every entry. Is there a way of using a column that does have a value for every entry, say column B, but then extending the range accross to S? If possible I'd like to avaoid having to move one of the columns with values for every entry. Auto Merged Post;I was looking at some of the suggested threads and found some code that I worked into my own
Set countRow = Workbooks(pathnm).Worksheets(m).Range("B1250").End(xlUp)
Set sourceAll = Workbooks(pathnm).Worksheets(m).Range("A1", countRow)
sourceAll = sourceAll.Resize(sourceAll.Rows.Count, sourceAll.Columns.Count + 17)
now this seems to work mostly, but it has deleted everything that was in column B.
View 2 Replies
View Related
Oct 26, 2007
I'm wondering if it is a all possible to have a VBA macro call another program (like a Perl scripts, or a Python script) from within VBA?
I have no idea if this is possible. I know that people often write programs which call other programs, but would have no idea where to get started on this.
If it IS possible, can you tell me if it is is extremely complicated?
I have to have a VBA script read some complicated text files, and parse and extract information from them. Perl is so great at this, and I seem to get a headache trying to do any pattern searching and matching with VBA. If it was instead possible to write a Perl script, which is then run by VBA, that would make my life so much easier... :-)
View 3 Replies
View Related
Jul 30, 2012
What I need to accomplish here is to randomly (or at least seemingly enough) generate a number between A and B values for many cells.
I know i can accomplish this through =Rand()*(B-A)+A
However lets say that the lower limit is 96 and the upper is 100. How would i get my data spread to appear to center more around 98-99, with a few randomly placed a little farther out but still within 96-100? I'll say i have 500 instances of this generated number. So what i need is the appearance that most of the numbers lie within the inner range with some anomalies outside that but still within the greater range, having fewer and fewer instances as the value gets closer to the outer limits.
I'm also placing this value in cells using VBA (most likely "for each cell in range(xxx)...")
How would i go about this?
View 2 Replies
View Related
Jul 20, 2012
I have some numbers in the range A1:A10, any macro make 20 copies of these numbers and paste them one after another down column A?
View 1 Replies
View Related
Jun 28, 2007
Is it possible to send the contents of a cell to outlook via VBA trigger?
View 14 Replies
View Related
Apr 7, 2014
Not sure if there is a way to do this. I'm using excel 2010. I used this function
=INDEX(Sheet5!A1:A149,RANDBETWEEN(1,ROWS(Sheet5!A1:A149)))
I have a list on names that is in the range on Sheet5!A1:A149 I'm using the function to randomly select one of those names.
What I want to do: I want to add the randomly generated name to a range that I can then refer to later to see if that name has already come up. So I know if that name has already been used.
View 3 Replies
View Related
May 26, 2013
I am trying to put togther a VBA form button click to do the following: I have several customer names all in master sheet A1 - A300. I want the code to notice that there is a new customer and generate a new sheet, naming the sheet the customers name and copying and paste the entire sheet named 'worksheet' to this newly generated sheet.
View 2 Replies
View Related
Apr 4, 2014
Not sure why this Code is not copying data across to the second worksheet.
The attached file 140404 Need Range.xlsm is an extract showing only the relevant elements of a much larger structure.
Drivers upload a stock record each day onto the Data Input sheet, listing what products and volumes they have loaded.
Because the range of products varies every day, this has to be set as a "dynamic" range on the worksheet.
To create a printable form, I need to copy each Item ID and Quantity from the Data Input sheet into the "Van Load" spreadsheet.
So Data Input D10 copies to Van Load E6 and the quantities from C10 to G6, down one row, repeat, etc. until the last row of variable Data Input range.
Option Explicit
Sub VANRECORD()
Dim lRow As Range, oCell As Range, nRD As Range, ws As Worksheet
Set lRow = ActiveSheet.Range("B" & Range("B65536").End(xlUp).Row)
[Code] .....
View 2 Replies
View Related
Aug 15, 2008
Question 1) Is there a way that whenever I select Cell B39 that it will copy cells B39:V39 ? From there I can manually paste that selection to where I need to.
If this is possible, it would save the effort of having to select B39:V39 manually and clicking CTRL-C. I am gathering data and the copying and pasting is killing me.
Question 2) Is it possible that when I click on Cell A9 that it can paste any data that I just copied from another worksheet to cells A9:D29? The size of the selection that I would copy is the same size as A9:D29 (4 columns & 29 rows).
I have searched for a solution, but I am not having much luck since I am anaware of the proper terminology for these types of actions.
View 10 Replies
View Related
Jun 26, 2007
I am working on a macro that copies tabs from the spreadsheet the macro (button) is located in, creates a new book for them, and then pastes values so that no formulas still exist. The problem I am having is with named ranges. The named ranges do not reference the new sheet, but rather the old spreadsheet. This is fine because the new file is solely for presentation, however, one macro (which selects print ranges based on user selected checkboxes) tries to reference the old spreadsheet once it runs. I would like the macro that I currently have working, to also make this macro in the NEW spreadsheet so that it can still highlight the correct print area when used. The macro does not reference the name of the workbook at any point, it is purely "Range("ai10") type references so I don't understand why it is trying to open the old sheet back up.
View 2 Replies
View Related
Jun 2, 2009
I have a list of references in a range (A5:A98) in a worksheet called "Architectural". What I am trying to do is create a seperate worksheet based on each cell value in the range. However, rather than blank worksheets, I would like each new worksheet to be a copy of a worksheet called "Template". If possible, I would like to have the name of each worksheet also put into cell B2 of each copy.
View 2 Replies
View Related
Dec 5, 2007
I want to copy a range of cells and paste them in two different locations and have the new cells relate in data using a command button. This button would be clicked an infinite amount of times to provide the amount of copies desired and to be pasted underneath the previous copy. Example:.............
View 3 Replies
View Related
Jul 7, 2008
Create a smart macro which will remove all references to the #REF! which is left when rows are deleted. It would have to remove all trace of it from any equation it may be in (i.e. if it was in an averaging equation, it would need to remove the preceeding comma as well:
=average(a1,a2,!#REF!,a4 .........)
View 9 Replies
View Related
Mar 16, 2009
I have a macro that looks at a list of students and the school they attend, and then creates an individual worksheet for each school containing only their students. I want to hide Column B on each of those worksheets. This seems like it should be easy, but it is not working.
When I leave it as is pasted below, Column B does not get hidden.
When I change it to Sheets(school.Value).Columns("B").Select I get an error message stating "Select method of Range class failed."
Sub ExtractSchools()
Dim wsTransfer As Worksheet 'worksheet with transferred data from registrations wrkbk
Dim wsList As Worksheet 'worksheet with list of students
Dim wsNew As Worksheet 'worksheet being added for a school
Dim wSheet As Worksheet 'name to loop through all worksheets
Dim rng As Range
Dim school As Range
Dim rowNum As Integer
Set wsTransfer = Sheets("Transfer")
Set wsList = Sheets("Student List")
wsTransfer.Select
Range("Database_Transfer").AdvancedFilter xlFilterCopy, Range("Criteria"), _
wsList.Range("Database_Unique").........................................
View 9 Replies
View Related
Nov 6, 2009
I currently have the following code that copies a range opens notepad pastes the range opens save dialog and types the file name. The problem I have is with overwriting the existing file.
Range("A1:A202").Select
Selection.Copy
Shell "notepad.exe", vbNormalFocus
SendKeys "^V"
SendKeys "^s"
SendKeys "Total_IEDs_Hour_Of_Day_2009.xml"
SendKeys "{TAB}"
SendKeys "a"
SendKeys "{ENTER}"
Everything works fine to this point. Then it opens the do you want to overwrite dialog and I cant get it to hit yes.
View 9 Replies
View Related
Dec 11, 2008
Automating the Number of copies to print based on a range. ihave the following
View 3 Replies
View Related
Nov 18, 2008
when I run a macro, it takes me to a different sheet, clicks on a cell, and then goes to data--> form to automatically generate a form so I can make a new entry. I want the macro to wait until I have completed the form, and on completion to do something else. I'd prefer it if I could indicate completion of the firm by just a keystroke, but a mouse click will do as well.
View 2 Replies
View Related
Jul 5, 2006
The question is pretty much described in the post title. Here is the situation:
I have a workbook that has data plugged into it manually throughout many sheets, and at the end there are a few sheets with different graphs and charts that are generated by a macro. This macros works perfectly - all the data is accurate and the figures are perfect when compared with a manual count. The problem I have is that the cells where the macro puts the summed values are in a chart that is supposed to create a bar graph. Normally, if I change a value that a bar graph uses I see the bar graph change - but that does not happen with the cells that have values placed in them by the macro. I also have a section that sums the values in the chart to make sure it's running right, and these values do not update automatically as well. The cells have the formula =SUM(B3:B12) and so on, in them. Right now, every time that I run the macro I need to go into the cell with the formula, hit 'enter', and then it does the summation. Is there a way to correct this problem, or is this something that is part of excel?
View 4 Replies
View Related
Jan 23, 2014
I have 5 opened files. I have copied into those files a set of formulas from my master sheet (with the macro). In A3 of ALL the open files, there is a date (ex. Date: 1/4/2014) Based on that date I want to copy the result of what I copied into the files (below is the code that I used to copy into the open files, maybe I could add something to create a named range of the resulting paste) back into the master sheet into a tab called 2014 and into a cell two cells below the cell in row 12 with the MATCHING date.
View 14 Replies
View Related
Sep 29, 2011
I need an excel macro that will copy the last row of data from one worksheet within a workbook to another worksheet in the same work book. The last row number of data will alwasy vary
View 9 Replies
View Related
Jan 20, 2014
I am looking for a Macro, which would first ask me to input the member notation in a new tab (Say M1 in the example). After I give the input as M1 or M2 or M2 or so on, it would display only rows for Section 1 (min and max values) and section 4 (min and Max values)(highlighted in Red). I know it is petty simple, but I am still an amateur with regards to Macros.
Member
Section
Axial
Shear Y
[Code].....
View 5 Replies
View Related
Sep 25, 2008
I have created a macro, which copies data from 1 sheet to another, in order to Format and rearrange the columns.
The problem I have is that if I "Insert" a column on sheet 2, I have to amend all of the ranges in the macro to reflect this.
Sample of the code
Worksheets("FTIS Data").Select
Range("e5:e" & Range("e" & Rows.Count).End(xlUp).Row).Copy
Worksheets("Quote Tracker").Select
Range("c5").Select
ActiveSheet.Paste
Worksheets("FTIS Data").Select
Range("g5:g" & Range("g" & Rows.Count).End(xlUp).Row).Copy
Worksheets("Quote Tracker").Select
Range("d5").Select
ActiveSheet.Paste
View 9 Replies
View Related
Sep 27, 2008
i created a sheet and called it "Original" (which somehow is a template), in another sheet i created a big Button named "Create account" ,then i created a macro which copies that "Original" sheet and by default it names it "Original 2 " now that i need a new account each time i click that button to create a new sheet and rename it by the client name i need, in order to keep the "Original" intact as a template. It happens sometimes by mistake that i rename the "Original" one ( The template one) which therefore returns an error when i click the button!
Is there anyway to add to that macro a code which rename that "Original 2" something else lets say "Account" to differentiate it from the Template one?
Or to Protect only the "Original" sheet from being renamed out of the whole sheets i have , in order not to rename it accidentally?
View 9 Replies
View Related
Aug 4, 2009
Trying to create a spreadsheet to track transactions. Sheet "A" is the working file with a limit of 25 rows. When a transaction is complete, I would like a macro button that copies one of these rows (1-25) to an archive file (Sheet "B"). I would like it to copy and paste to the next available row on Sheet "B".
View 9 Replies
View Related
