I have data in cells C3 through E3, then a blank column, followed by data in cells G3 through I3. When I use excel to record a macro, it produces the following.
However, when I run the macro, it only selects cells C3 through E3. How do I get it to continue through the blank column? I tried to make this example as simple as possible.
Move after return direction Xltoright In Specified Range.
Private Sub Worksheet_SelectionChange(ByVal Target As Range) If Target.Address = ThisWorkbook.Worksheets("mastersheet").Range("trgadd") Then Application.MoveAfterReturnDirection = xlToRight Else Application.MoveAfterReturnDirection = xlDown End If
How to create a macro that selects only the 2nd file in a folder to be opened instead of every file.
So far the code below is opening every file.
Sub ConsolidateAll()
Dim wkbConsol As Workbook Dim wksConsol As Worksheet Dim wkbOpen As Workbook Dim wksOpen As Worksheet Dim FolderName As String Dim FileName As String Dim Cnt As Long
I seem to be getting myself into a complete muddle as was wondering if someone to help me with a Printing problem.
On the attached sample, i'm trying to write a macro to print the selection but only print where the status is "Active" to the ned of the selection. However, the spreadsheet is changing on a daily basis i.e. new lines being added and lines being taken off.
So, to take potential of user error out i wanted a macro to print the "active" selection.
Is there any way this code (below) can be modified so that the macro runs without actually selecting the sheet it requires. The reason for this is so i can hide the sheet (Column Output 3) from view so the data isnt displayed. at the moment the sheet is on view and i would rather it werent. this is the code i have
Sub DistributeRows() Sheet11.Select Cells.Select Application.CutCopyMode = False Selection.ClearContents Dim wsAll As Worksheet Dim wsCrit As Worksheet Dim wsNew As Worksheet Dim rngCrit As Range Dim LastRow As Long Set wsAll = Worksheets("Column Output 2") LastRow = wsAll.Range("A" & Rows.Count).End(xlUp).Row Set wsCrit = Worksheets.Add Set wsNew = Worksheets("Column Output 3")..............
I need a macro that can cut and paste a selection of 3 cells to a location one row above and 3 cells to the left. I want to run it each time manually from the right cell among the 3. the macro should therefore (when standing on the right cell of the 3):
1. select 2 more cells to the left 2. cut the selection 3. move 3 cells to the left and one cell up 4. paste 5. move the cursor back to the starting location
I have an excel file with a date dropdown box. The date is populated from another sheet in the same file. I need to create a macro, which will select the latest date by default when the file is opened. Is this possible and if so could someone please lead me in the right direction? I am using Excel 2003 and the date format in the dropdown box is "dd-Mon-yy" --> eg "21-Dec-09"
I tried recording a macro but I am keep on getting an error. I need a macro which will print the selection of A1:D28 on a worksheet called Invoice. The print needs to be scaled at 165% of its normal size. i need it to be normal margins and if possible any printer.
Im having some problems with range selection in macros. Basically, what the macro does is Copy / Paste as Values in differet sectors of an active worksheet, so this is the code for each range of cells that I need to copy paste:
The problem with this code, is that because it specifies EXACTLY which range to select, if I add a row before that range the macro will be now selecting an incorrect range.
For example, say I have a value on cell A5, and the macro is set up to copy/paste that cell. Later on, I decide to add a row in A3, so the value I would need to copy/paste will now be in A6, but the macro will still execute on A5 (incorrect, as it should now execute in A6, and that is what I have to manually correct each time).
i am using user form to run some macro and i like that after running macro the cursor will return to the active cell , at the moment the cursor located on the user form.
I have is two spreadsheets with different data on them, but the only connector is the user ID, so I want the cell I select with the user ID to be copied it then switches to the other spreadsheet and finds the copied selection, it then takes the columns on the selection of A to J and pastes them back in the other columns in the other spreadsheet.
My only real problem is that I can't get it to use the selection.copy in the find to select the cells I need, any help would be great, thanks.
Code ( i put spaces bewteen the other parts and find function so you could easily see it):
I have a macro that I am running "onentry" of a worksheet. The problem is that I have some cells that are validated to allow a list. If I manually type a word from the list in the validated cell the macro runs. However, if I make a selection from the list the macro does not run. I guess vba does not see my selection as an entry.
I've recorded a macro which selects "1" in a filter drop-down box then prints some pages, then comes back and selects "2" in the filter then prints some pages, etc etc etc.
I've looked at the code for this and it treats the "1", and the "2" etc as text each time - originally I had the filter on names, but the names change each time I need to do this whilst the process doesn't, so I filtered on numbers instead.
However, I would have to enter the repeated blocks of code down to 1000 to get it to select down to "1000" in the filter. About 3/4 lines each time but with me manually typing in 1, 2, 3, 4 .... 999, 1000.
Is there a way to say in VBA 'repeat filter selection until you've run out of numbers then come back to "All" and stop ?
I have a simple macro that allows for inserting cells above the selected cell. It actually inserts 2 cells: above the selected one and above the one immediately to the right on the same row.
I need to add 2 features to prevent mess ups:
- The Active cell should only be on column "N" and after row 15 on the sheet. Any other cell selection should be ignored or ideally pop a warning to prompt user to select a > N15 cell.
- An OK/Cancel dialog box that pops up before execution and reads: "Are you sure you want to skip "text_of_selected_cell" for date "text_of_Column-13_cell_on_same_row"?"
Sub SkipDayRelative()
ActiveCell.Offset(0, 0).Range("A1:B1").Select Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove End Sub
I have got 8 sheets in a workbook having the following names first one is Main,and others are Aw,Nzm,Mhk,Gul,Qta,and Hdr.
I want a ComboBox in every sheet displaying names of all sheets in combobox and when i select a name of sheet from combobox it goes to that sheet after hidding sheet where selection was made and running macro codes which i have developed for sheet. I want only one sheet display on the screen when one selection is made other one is invisible.
I get 40~100 page PDFs of purchase orders every week. Each page has one part number and its open order and forecast information. Some pages have a few line of information, some have many lines.
I convert this file into a txt file.
I then create a macro to import it as space delimited and format it.
What I need to do it get rid of the header/footer information on EVERY page.
When the txt file is created it doesn't have any page marks.
The header has "ABC Widgets" as the customer name and then 10 rows of unnecessary information. If I do a Find ALL for "ABC Widgets" and select all, it will delete that header line at every instance, but the leftover selected cells then start not-lining up (meaning I can't just hit "delete row" 10 times and have it pick the right row--the rows don't line up any more and each instance is -1 row offset.)
Is there any way to extend the selection of non-contiguous rows (starting with ABC Widgets) down by 10 so I can delete them?
I am looking to run a marco for a selection range, and the selection range could vary in size. Using the Macro recorded (whilst turning on the relative reference) the Macro runs for a defined number of cells. I would like to run certain Macro, for different ranges of cells.
I see where I can use the following to bring up the color pallet
VB: AutoLinked keywords will cause extra spaces before keywords. Extra spacing is NOT transferred when copy/pasting, but IS if the keyword uses "quotes".
Sub MyColors() ' brings up the colors dialog Application.Dialogs.Item(xlDialogColorPalette).Show End Sub
But I don't know where to go from here. I would simply like to have cells selected, run the macro, select a color from the dialog, press the ok button, and have the selected cells colored per the color selected in the dialog. (Of course, pressing cancel would exit without changing any colors.)
This recorded macro inserts a line below the cell that active when it was first recorded. It then copies some text and a formula to the line that was created.
Sub Macro11() Rows("10:10").Select Selection.Insert Shift:=xlDown, CopyOrigin:=xlFormatFromLeftOrAbove Range("A9:E9").Select Selection.Copy Range("A10").Select ActiveSheet.Paste Range("H9").Select Application.CutCopyMode = False Selection.Copy Range("H10").Select ActiveSheet.Paste Range("F9").Select End Sub
If you run this macro again at a different cell position, it goes back to the first starting position and repeats the same action. I see that the cell references from the first recording are fixed in the macro. I can't figure out how to make the macro use the new current cell position as the starting positiion when it runs again.
can i use a combo box with a dropbuttonclick to run the macro only when the arrow is selected . The problem I am having is the macro will run on the selection of the arrow which is whatt I want but it also run when I make a selection it the combo box
I have selected 6 rows and 2 columns in a sheet and I have a button in the same sheet.Now I click the button it triggers the button_click where I have put msgbox to popup.But I need this selected value in message box instead of the my hard coded string.
The end of the range could be any cell. The top of the range is fixed in A1.
I've tried with this:
Sub Order() Dim final As Variant final = Selection.End(xlUp).Address Range("A2").Select Range("A1:" & final).Sort Key1:=Range("C2"), Order1:=xlAscending, Key2:=Range _ ("G2"), Order2:=xlAscending, Header:=xlGuess, OrderCustom:=1, MatchCase _ :=False, Orientation:=xlTopToBottom, DataOption1:=xlSortNormal, _ DataOption2:=xlSortNormal End Sub
I have created a toolbar that has "Previous Worksheet" and "Next Worksheet" buttons on it with the following macros assigned:
Sub NextSheet() On Error Resume Next If ActiveSheet. Name = "Problem Listing" Then MsgBox "This is the last worksheet." Else ActiveSheet.Next.Select End If End Sub
Sub PreviousSheet() On Error Resume Next If ActiveSheet.Index = 1 Then MsgBox "This is the first worksheet." Else ActiveSheet.Previous.Select End If End Sub
This seems really simple but the code crashes after 4 or 5 repeated clicks of the button.
I have an excel form where users can input modifications by selecting a range and then pressing a command button to input a value in the selection.
My goal is: to restrict the location where a user can select a range of cell and then execute the macro . The cells where the user can use the macro are merged and in my code, I used the address as show in the address bar in excel for their location. If the user select a cell that is not permitted, a message box is displays and exits the code.
If (Selection.Address <> Range("AE7").Address) _ Or (Selection.Address <> Range("BM7").Address) Then Msgbox ("Wrong location") Else
For some reason it doesn't work since the message box appears even if I am within the permitted locations.
Note: AE7 is the first cell of a merge, same as with BM7
I have done much searching, found some relevant, similar postings, but I have not been able to make it work for my code. I want to have multiple option buttons and have a macro determine which one is selected. One similar posting had macros run from the clicking on the option button, but I want the macro to determine which is clicked and then return some functions. From my research...this is my code.
Sub temp() If OptionButton1.Value = True Then Range("C1").Select Selection = "OB1" Else 'assuming two buttons and first is false Range("C1").Select Selection = "OB2" End If End Sub
This gives me an "Object Required" error on the first line of the code.
There's a macro I'm trying to figure out for a calendar I'm working on. Here's what it has to do.
1.) Selects the cells for the current month (I assume the user would have to click on the current month itself) plus the two upcoming months. i.e. November, plus December and January.
2.) Sets the selected cells as the area to print, then prints those cells.
If there's anything that might be a challenge, the numbers for the days are all text boxes, if that makes a difference. I've been experimenting with different formulas with no luck.
