Run Macro Based On ComboBox Selection

Jun 8, 2006

can i use a combo box with a dropbuttonclick to run the macro only when the arrow is selected . The problem I am having is the macro will run on the selection of the arrow which is whatt I want but it also run when I make a selection it the combo box

View 9 Replies


ADVERTISEMENT

Populate Combobox Based On Selection Of Other Combobox

Jun 12, 2006

I have a table, headers "FirstName" and "SurName".

Further a Userform with 2 Comboboxes "FirstName" and "SurName"

I'd like to choose the FirstName (say Jack) in the "FirstName" combobox, and based on that get the choice of the Surnames of all my Jacks in the "SurName" combobox.

Actually my sheet has much more fields and comboboxes, but i think my problem is just that I do not find a way to populate them dynamically.

View 9 Replies View Related

Populating Combobox Based On Selection Of Another

Dec 25, 2009

I have a problem involving two combo boxes in a user form.

I need to populate different “lists” to combo 2, based on a selection in combo 1.

I browsed through the forum but could not find any solution that made sense to me.

Here are the specifics:
Combo 1 (called Cbo_Act) is populated with a list based on a named range in one of the sheets. The range is named “activity” and holds 2 records (“Income” & “Expense”).

This list is loaded as part of the form initialization.

If the user select “Income”, I need combo 2 (called Cbo_Act_Type) to show a list of various income types (derived from a dynamic named range called “Income_type”) and if the user selects “Expense”, I need the same combo box (Cbo_Act_Type) to show a different list, specifically – a list of various expense types (derived from a dynamic named range called “Expense_type”).

I know that this should be with a Cbo_Act_Change () routine, but for the life of me, I can’t figure out how to do it.

View 9 Replies View Related

Fill ComboBox Based On Selection In Another

Jul 6, 2007

I want to dynamically list items in combobox placed in excel sheet. I have a list of 10 values in a column in excel sheet. I have placed two comboboxes in the same sheet. Now depending on the first combobox selected value i want to list either all or only few values from the available 10 values.

View 4 Replies View Related

Populate Textbox Based Off ComboBox Selection?

Apr 7, 2014

I need to populate a textbox based off 2 combobox selections. My first combobox selects the worksheet. "08BOG, 09BOG, 10BOG...15BOG" My second combobox lists majors based off of the worksheet selected in combobox 1. I need my textbox to populate the value 18 rows over the selected worksheet and the selected row.

Currently I have something like this:

[Code] ......

But obviously this is all wrong because it is only referencing one sheet instead of the selected sheet in the combobox.

View 1 Replies View Related

Populate Listbox Based On Combobox Selection?

Jun 26, 2014

My table contains 26 columns, I have Column E header as 'Assignee' and Column J for 'Date_Closed'.

I have a form containing a combobox and a listbox. The combobox is populated with 10 Assignee Names.

I want the listbox to be populated with all rows containing the selected Name ONLY if Date_Closed column (J) is blank/null.ie.date not filled yet.

For example, if i select "Ann", the listbox will show all rows in the table that have Assignee Ann for and closed date is still blank.

View 1 Replies View Related

AutoFill Cells Based On Combobox Selection

Jul 14, 2014

What I'd like to do is fill specific cells with specific information drawn from other pages based on a combo box selection.

For example, if I were to pick 10131 in the combo box, I'd like it to fill out cells X, Y and Z with information from the three cells to the right of 10131. Assume X, Y and Z are not touching.

View 1 Replies View Related

Filling Textbox Based On Combobox Selection

Jul 21, 2009

On a sheet named "Matrix" I have rows of data in columns A, B, and C. I have the following code in a ComboBox that will show names from column B of the Matrix sheet.

View 3 Replies View Related

Open Userform Based On Combobox Selection?

Feb 20, 2012

I have a series of cascading comboboxes on a sheet named report. In the first combo box,cboCategory, the user will have the option of selecting New, Existing, 401k, CPA Information. If the user selects CPA Information I need a user form named CPA to open.

View 4 Replies View Related

Hide Rows Based On Combobox Selection

Dec 16, 2006

I know there are a lot of hide row threads... i've searched for ages... but (unfortunately) i can't a solution that addresses my problem and I'm stuck. Please help!

I have a data between rows 10 and 1310 and I would like to use a combo box option to select and view certain rows of data only. I don't want to use auto filter because i have a separate macro using an auto filter on the same data - they won't play together.

So in short - combo box will contain values from column A. When value is selected from combo box hide all non matching rows based on column A values.

So i have added a combo box to sheet1 and populated it with the following workbook code...

Sub Workbook_Open()
With Sheets("Sheet1").ComboBox1
.AddItem "Select Product Type"
.AddItem "Apples"
.AddItem "Mangoes"
.AddItem "Oranges"
.AddItem "Clothes pegs"........

View 9 Replies View Related

Fill Textbox Based On ComboBox Selection

Jan 5, 2008

There is a small command button in cell A11 that brings up the userform. I have a multi-tab user form the userform contains a number of combo boxes with an associated textbox right of each. I would like to populate the textbox based on the value selected in the combo box. For example when Ice Foot is selected (Type of Fast Ice) populate the textbox (txtFastIceEncoded) with the value of 6. These values are located on 'decode' sheet. I then want to take the four values and place them in the textbox 'txt_Tw_Tw_Et_DE_ai_group'. Ultimately I want the values to end up back in the worksheet 'Synoptic Ice Obs'. Perhaps there is a better way to do this than I am trying. I have poured through countless threads in this forum and have tried a number of these. I however always seems to run into some problem that I do not understand fully. I have included a copy of the workbook.

View 4 Replies View Related

Populate Listbox Based On Combobox Selection

Jan 25, 2008

My table contains 6 columns, one of which is 'season'.

I have a form containing a combobox and a listbox. The combobox has 4 options (spring summer autumn and winter). I want the listbox to be populated with all rows containing the selected season. For example, if i select "spring", the listbox will show all rows in the table that have spring in the season column.

I realise this is a very remedial question but i am very new to VBA and programming in general!

View 6 Replies View Related

Populating Combobox Based On Selection From EXCEL Worksheet

Jul 25, 2014

I'm trying to do some userform development with multiple dependent comboboxes, but I am having trouble populating the third and last combobox. First, I populate the 1st combobox on the userform initialization. I can get the first 2 comboboxes to populate correctly, but I can't seem to get the 3rd combobox to populate correctly.

The 3rd combobox takes the selection from the 2nd combobox and searches column "A" in the worksheet "Chassis Specs" and populates the 3rd combobox with data from column "B", there will be repeat items in column "A", but all those occurances should populate the 3rd combobox with the data from "B".

I am attaching my whole workbook.

Chassis Specs Info_Build_REV B.xlsm

View 14 Replies View Related

Add Information To Specific Sheet Based On ComboBox Selection?

Jan 29, 2014

I have filled up my ComboBox1 with the sheets I want to add information to. My problem now is how to place the info in the correct sheet when I click CommandButton1.

I've been working on this for a few hours now. I got this to work on the first code I found but it didn't work afterward. I just deleted the whole thing and started again.

View 1 Replies View Related

Based On Selection In A Combobox I Need The Corespoding Value In A Specific Cell

Jan 26, 2009

open attached file: For example, if I click "show matching lists" button and select from combobox st8 / b1 / b4. I need in cell K2: 3472.9 and in cell L2: 3472.9.

View 2 Replies View Related

Change Userform Label Based On ComboBox Selection

Dec 21, 2009

I have a userform that has a "payment type" combo box

This box consists of:

View 6 Replies View Related

Userforms - Populating Textbox Based On Combobox Selection

Oct 26, 2003

I am creating a Userform and one of the elements on it is a combobox where the user has to select their name. On the same Userform, I want to have a textbox (or listbox or another combo box if necessary) which will show the users default cost centre based on the initial combobox selection. I've tried doing this various ways, but I can't get the textbox to update when the combobox selection changes.

View 7 Replies View Related

Filter Choice Selection Based On Combobox Values?

Apr 24, 2014

I am trying to create a macro that will allow the user to select choices from combo boxes on a userform. The choice of one combo box determines what will be shown in the next combo box and so on. This will occur a set number of times (depending on what they are looking for), at which point the list of possible choices will be presented.

I populated one combo box in UserForm_Initialize() but then I might have to change the others with Combobox1_Change()...

View 4 Replies View Related

Automatically Create Worksheet ComboBox Based On Selection

May 16, 2008

I am working on a spreadsheet for a client. I am using Excel 2007 and she is using Excel 2000. I have created a emplate for her to enter survey data into. Using the following code, I have created combo boxes for the drop-down menus so the client can tab from one cell to the next while entering data:

Option Explicit
Private Sub TempCombo_KeyDown(ByVal _
KeyCode As MSForms.ReturnInteger, _
ByVal Shift As Integer)
'Hide combo box and move to next cell on Enter and Tab
Select Case KeyCode
Case 9
ActiveCell.Offset(0, 1).Activate
Case 13
ActiveCell.Offset(1, 0).Activate
Case Else
'do nothing
End Select
End Sub.....................

View 6 Replies View Related

ComboBox For Selection Sheet And Run Macro

Feb 5, 2008

I have got 8 sheets in a workbook having the following names first one is Main,and others are Aw,Nzm,Mhk,Gul,Qta,and Hdr.

I want a ComboBox in every sheet displaying names of all sheets in combobox and when i select a name of sheet from combobox it goes to that sheet after hidding sheet where selection was made and running macro codes which i have developed for sheet. I want only one sheet display on the screen when one selection is made other one is invisible.

View 9 Replies View Related

Multi Column Listbox Change Based On Selection From Combobox

Mar 20, 2012

I have attached my Excel File with the userform I am trying to do. What I am trying to do is change the table in the listbox based on the selection of the combobox and then my selection in the listbox will pass the selected values to Range A1:C1.

Excel 1.xls

View 9 Replies View Related

Using Command Button To Open Worksheet Based On ComboBox Selection

Mar 6, 2014

I have a main worksheet that has two combo boxes. The first combo box has a list of machines. The second combo box brings up a list of models for the type of machine selected. I would like to insert a command button, that when pressed will open a different worksheet with the specs of the model selected in the second combo box. I am having trouble finding a starting point for the code to have the command button perform this.

View 6 Replies View Related

Filtering Data From One Worksheet To Another Based On Selection In Combobox On Userform

Feb 14, 2013

I am using the combo box that lists the loan officers number from the selection the loan officers name and branch is loaded. I want to be able also base on the officer selected add get the total new loans opened by that officer. I added an if statement that checks if the loan officers number from the "Oct_2012" is equal to the loan officers' selection from the combo box then add all the loans than match that criteria. I am not sure if what I am doing will work but when it reach to the For block it only reads the For statement and then go to the endif and don't execute the statement within the block.

Code:
Sub cmbLnOffNum_Change()
Dim idx As Long
Dim LnOffRow As Long

[Code]....

View 1 Replies View Related

Excel 2010 :: How To Auto Populate Data Based On ComboBox Selection

Jan 27, 2012

I have a question on how I could populate data using a combo box selection in Excel 2010.

For example, I have a table with values in Sheet 1, & below that table there is a combo box whereby another table of values can be populated based on the selection of the combo box.

Maybe to make it clearer...

Table 1
Name | Address | Phone number
Andy | Avenue 2 | 999
John | Road 5 | 998

Combo box (selection of names): John

Data derived from combo box - Table 2
Name | Address | Phone number
John | Road 5 | 998

how I could solve this Also, do let me know if this can be done without the use of VBA.

View 4 Replies View Related

Macro To Unhide / Hide Sheets With Combobox Selection

Jun 18, 2007

I have a workbook that contains approx 50 sheets and will grow to somewhere in the region of 200.

The majority of sheets, which contain the raw data referenced by the renaining sheets, are hidden. I will occasionally need to update the data in some of those hidden sheets and would like an easy / quick way of unhiding them.

The front page has several comboboxes which select the page needed for the calculation being performed, eg I select Chapter2 in the first combobox, section 4 in the second and page 12 in the 3rd. The output is combined / abbreviated into into a cell eg Ch2-Sec4-P12. That being the name of a sheet I then use INDIRECTs to retrieve the data I want and place it in a spare sheet, that works well.

I'd like to do the same to select the sheet to unhide. I can setup the comboboxes to give the name of the sheet I want to unhide / hide in a cell but then I'm stuck;

How can I use the contents of a cell in place of the sheet name in a macro command such as Sheets("data").Visible = Not (Sheets("data").Visible) ?

View 9 Replies View Related

Excel 2010 :: Hide / Show Textboxes And Labels Based On Combobox Selection?

Jul 8, 2014

I have created a UserForm that has a ComboBox and depending on the number selected I want it to show that number of Labels/TextBoxes...

So if I select "0" nothing is shown, if I select "1" one set of Labels/TextBoxes is shown, select "2" and two sets of Labels/TextBoxes are shown... but also if I have selected "2" and then select "1" I want the second set to be hidden again...


Also I know I should have renamed the Label/TexBoxes to make it easer but I was adding things and making it up as I went along...

I'm using Excel 2010 on windows 7.

Code:
Sub UnHide_NewRoutings()
If (Engineering.ComboBox2.value) = "0" Then
Engineering.Label4.Visible = False
Engineering.TextBox5.Visible = False
Engineering.Label9.Visible = False
Engineering.TextBox9.Visible = False

[Code] ..........

View 3 Replies View Related

ComboBox Selection That Fills A TextBox And Other ComboBox

Sep 28, 2013

I created a UserForm then linked ComboBox1 to range A2:A, TextBox2 to range E2:E, and ComboBox3 to range M2:M of the same worksheet, named Sheet3. The row contents in Column A, Column E, and Column M are associated. Therefore, when the UserForm is active I want to be able to select a row from Column A in ComboBox1 and have the UserForm pull the contents from the same row of Column E into TextBox2, and Column M into ComboBox3. Here is what I have so far, but its not quite doing it.

Code:
Private Sub UserForm_Initialize()
Sheets("Sheet3").Activate
Dim ColARange As Range

[Code].....

View 2 Replies View Related

Run Macro Based Combobox Choice

Jul 13, 2007

I'm using a ComboBox ,ComboBox2_Change(), to Call and run 1 of 4 different macros. It works fine if I choose a different item in the list each time, but if I choose the same one, it won't run the macro a second time.

View 5 Replies View Related

Extracting Data And Posting In Another Sheet Based Upon Macro Selection

Mar 9, 2009

I have written basic macros (probably not the most efficient solution, but its what I know how to do). Up to the present point things are going well. (I tried to attach file, but without success - So I will email the file directly it is pretty easy to figure out) I have option buttons tied to macros that populate a data sheet based upon the input.

This works out quite well and I am able to generate the statistics I desire quite easily. Now comes the second phase, (this is where I am stuck) - when I click the option button "no", I would like this to generate a line item in a separate existing worksheet which lists the item number, tells the discrepancy (as written in the column on the inspection criteria sheet), has a text field for the inspector to briefly explain the exact nature of the discrepancy, and also keeps discrepancies in proper order. Conversly, if "yes" is selected, I would like to be able to check the associated comment page, search the page for that discrepancy number, and if found, delete the line item, then re-oder the page.

View 8 Replies View Related

Create Surface Chart Via Macro Code Based On Selection

May 28, 2008

I want to write a macro to add a surface chart for a Data Range which includes 6000 data points. But the series selected for the chart don't cover all Data Ranges, only part of them.

Public Sub AddChart2(LastRow As Integer, LastCol As Integer)

Dim cht As ChartObject, currentSheet As Worksheet
Dim rng As Range, newRow As Range, srcRange As Range
Dim colIdx As Integer

colIdx = 5

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved