I need to use the Textbox ControlSource in some forms to read specific data from worksheets, different source sheet for each form. How do I tell the ControlSource to look at a specific cell in a specific sheet, rather than just the active sheet? I want to do this using the properties of the Textbox rather than VBA.
View 3 RepliesI am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
I have an Excel spreadsheet with a UserForm. One of the text boxes on the user form has a cell from the spreadsheet as the ControlSource. However, this cell has a formula. It generally works fine, but the formula is sometimes just disappears. My guess is some of my coding is incorrect. Or, perhaps I cannot have a cell with a formula as a ControlSource. Is there any extra coding I can do to protect the contents of that cell? Locking the cell and protecting the sheet does not work. I will forward the coding to anyone who is interested.
View 2 Replies View RelatedI currently have the following macro running to set a chart's data values:
Sub C3Quarter12013()
'
' C3Quarter32013 Macro
'
'
ActiveSheet.ChartObjects("Chart 2").Activate
ActiveChart.PlotArea.Select
ActiveChart.SeriesCollection(1).Values = _
[Code] ......
When I copy the tab and change some of the data within the cells, I want the macro refer to the chart on the current tab and the values in the current tab - as currently it refers to only "Chart 2" and the values in the tab 'Figure 2 - WE OPH'.
I've tried changing the sheet name to ActiveSheet.name but that doesn't seem to work.
I have a sheet with 30 textboxes made with the drawing toolbar. The user enters data, then clicks on a button which formats the page to adjust row size to match amount of info. I am having trouble finding the code to store the currently selected textbox in a variable so that I can place the focus back to the same textbox when the macro ends. Can anyone help me with the code to get the active textbox?
View 9 Replies View RelatedI have over 20 Userform which have one textbox with the same name txtsejobcode1.
Additional I have a UserForm in which user can search for a needed job code.
I wanted that after a user will choose a job code the job code will be added in to the active userform with the textbox named txtsejobcode1.
I could build this:
[Code] ..........
But in the line with Combobox I'm getting a error 438
Run Time error 438 Object doesn't support this property or method.
I am trying to do the following.
When Userform2 fires up - there is a textbox.
I would like the textbox1 to be filled by:
Taking the Selected or Active Cell in Sheets("positions"), eg, L5
but then finding the exact Cell match in Sheets("price"), eg, also L5
and placing this cells Value in Textbox1.
The 2 sheets are exact mirrors but contain different data.
I have a userform with a textbox and a command button. I have used data validations on the textbox. Clicking the command button saves the data in the worksheet. It works well if the user hits tab, enter or down arrow key after entering the data. The problem is, the textbox validations fail to get executed if the focus stays on the textbox and command button is pressed. I want the command button to be disabled until the user has moved the focus away from the textbox -there by executing the validations!
View 3 Replies View RelatedI am working on a addin UserForm to quickly format cell text, especially only select characters in a cell. I have this functional in a modal setting working with the active cell when I activate the UserForm. What I would like to be able to do is to work in excel without having to close the Userform and have the textbox update with each new cell. I have changed the UserForm properties to ShowModal = false which gets the first half. However the textbox will only show the cell value I started with.
VB:
Private Sub UserForm_Activate()
TextBox1.Text = ActiveCell
End Sub
[Code]...
why the text box "txtjobnum" wont populate with the active cell in my "COMPLAINTS" sheet. The green code below is in the userform and the red text below that is in module 3.
Private Sub cancel_Click()
Unload Me
End Sub
[Code]....
What I have is a sheet that is copied periodically from some source sheet, and on this sheet is a table. This sheet is called "Onsite Checklist Template" and it's table is titled "Checklist". I also have another sheet called "Loggers and Initial Notes" which has a tabled titled "Record", and then finally a title sheet call "Proj Details".
To clear this intro up - The sheets, in their order, is: "Proj Details", "Loggers and Initial Notes", "Onsite Checklist Template". The tables: "Record" on "Loggers..." and "Checklist" on "Onsite..."
When the user wants to make a new site visit, he/she fills in the requested date and then selects a button on "Proj...". When this button is selected, it copies the table data on "Record" and puts it on "Checklist", then inserts a new worksheet tab, always in the 3rd position (the title is based on the site visit date in which the user entered), which is a copy of "Onsite...". Now we have another sheet with a table called "Checklist1", and upon another new site visit, there will be another worksheet with "Checklist2", and so on.
On the "Onsite..." worksheet, there is a button on it which also gets copied with the worksheet so that every new worksheet has this copied "Checklist ???" and this button. I'm looking for a macro that, when the button is selected, will bounce the active sheet's table "Checklist ???" off of "Record" and make changes as needed.
"Checklist ???" data range is B11:M20 (the header is on row 10); "Record" data range is B29:Q78 (the header is on row 28); Column headers are titled the same, just that "Record" has 4 extra columns, 3 in the middle and 1 on the end. "Checklist ???" columns 1-12 to "Record" columns 1-7, 10-12, 14-15. The search criteria is the 4th column in both tables ("Trk #").
I need the macro to do the following:If it finds a match, then update "Record" as needed with data from "Checklist ???", changing whatever cell is different in the row that contains the matching "Trk #", so long as the cell on "Checklist ???" is populated (i.e, if a cell on the target row of "Record" has a value, but it's blank on "Checklist ???", then "Record" wins; if it's blank on "Record", but populated on "Checklist ???", the Checklist wins. If both populated but different, then Checklist wins.If a "Trk #" exists on "Checklist ???" but is not on "Record" then add the line to "Record" (the 1st empty row, table size remains)I see no need for any "delete" at this time.
My concerns: The last column on record (column #16) is the filtering column for the worksheet copy event and needs to be left alone (it's formulated to produce a "Yes" or "No")I would like the ability to adjust table sizes if needed without modifying the macroThe table rows on "Checklist ???" will not be changed, deleted, or altered in any way by the macro.
I'm trying to create a copy of the active sheet and then rename the new copied sheet to what's in cell O4, which is a formula (see below) and then paste value cell O4 in B3 of the copied sheet. However, when I run this macro it doesn't seem to like the second line where I am renaming the sheet (run time error '1004').
"O4" =DATE(YEAR($B$3),MONTH($B$3)+1,DAY($B$3))
Sub NewMonth()
ActiveSheet.Copy Before:=Sheets(Sheets.Count)
ActiveSheet.Name = Range("O4").Value
ActiveSheet.Range("O4").Copy
ActiveSheet.Range("B3").PasteSpecial Paste:=xlPasteValues
End Sub
I would like a macro that will go to a fixed sheet, copy the format, go back to the previous sheet and paste the format. My problems arise going back to the previously activated sheet rather than just a fixed sheet.
View 2 Replies View RelatedI have a workbook that I want to copy two separate ranges from and then post to two different sheets. Range one on the active sheet from A4:K(no of rows will vary) to sheet Savoury Year, and range two A64:K(no of rows will vary) to Site Services Year. When pasting I want to paste it to the next empty row down.
Copy of workbook attached : Weekly Accounts.xls
What this code keeps adding the data to the active sheet instead of the specified "Users" sheet:
[Code]......
I want DELETE the rows that contains 0 (zero or -) in column F (SALDO BRUTO), when I click the Button (Clear). And How I can copy from this sheet to a new sheet in this workbook, but the names of new sheet automatic rename to next date or 2, and next when I click the Button "Copy to New Sheet".
View 2 Replies View RelatedI have a button on a sheet that runs a macro to unhide another sheet. That works, but I want the sheet made visible to remain forward. Instead, the button unhides the sheet and the sheet the button is on comes forward again. I am unable to figure how to keep the sheet made visible forward. Here is the macro 'as recorded'.
Sub UnhideSheet1()
Sheet2.Visible = True
End Sub
I am wanting to create a macro for excel that when run it it will copy the active worksheet and worksheet named "Timesheet" and copy them to a new Excel workbook named the same as the original file + "JobBrief".
View 3 Replies View RelatedWhen a sheet is the active sheet i use the following to define a range.
View 6 Replies View RelatedHow do i change the below code to not reference a named sheet but the active sheet.
In case you need it i'm trying to sort columns A:CQ on row 2 smallest to largest from left to right.
Code:
Sub Sort_Left_Right()
' Sort_Left_Right Macro
Columns("A:CQ").Select
ActiveWorkbook.Worksheets("Sheet1").Sort.SortFields.Clear
ActiveWorkbook.Worksheets("Sheet1").Sort.SortFields.Add Key:=Range("A2:CQ2") _
, SortOn:=xlSortOnValues, Order:=xlAscending, DataOption:=xlSortNormal
[Code ..........
I have a userform in my workbook with a button to access it on twenty different sheets in the workbook. Currently the userform will only populate the sheet titled "Blank1". How can I change it so it will populate the active sheet without naming it? So no matter what sheet I'm on when I hit the submit button the userform will populate only the sheet I selected the button on? See macro below.
Code:
Private Sub OKButton_Click()
Dim NextRow As Long
Sheets("Blank1").Activate
' Unprotect Sheet
ActiveSheet.Unprotect
[Code] ..........
I want to copy data from the current sheet, and past it in the "montly" sheet.
'i and j were defined above, with a Case statement
Range(" Ai:Cj").Select
Selection.Copy
Sheets("monthly").Select
' I want the upper left cell of the pasted area to be A11
Range("A11").Select
ActiveSheet.Paste
I get an error saying that I should select one cell and then paste. But I thought that that is what I did...
I have created an excel worksheet that will provide budgeting and estimating tools for my project managers. All data used to be manual entry and took a good while to complete. I am trying to automate the process with VBA.
I created a UserForm called InfoVerify1. On that form I have TextBox 1 - 10. When the UF opens, the boxes display project information from my worksheet called "Basis of Estimate", also known as Sheet26.
The TextBox1 ControlSource is set to "E4". When I run the macro with Sheet26 active, the proper information fills in. However, when I am on the Start page or any other worksheet and I run the macro, it tries to fill in the text boxes with E4, etc, from the active sheet. I tried changing the ControlSource to "Sheet26,E4" or any combo thereof with only error messages.
how to get it to refer to a cell on a particular worksheet and hold to that worksheet no matter which sheet I am on at the time I run the Userform?
I am working with a VBA userform and several textbox's, setting SetFocus and or TabIndex doesn't leave the box ready to accept input and there is no cursor shown to indicate it is ready to accept input.
View 2 Replies View RelatedI have a spreadsheet that is nearly 100 worksheets. I am new to VBA and would like to put a button on each tab to return me to the last active sheet. I've tried other codes I've found on here but with no luck. I'm not sure if i'm posting them to the right area within VBA.
View 4 Replies View RelatedI am not sure why this code won't delete, I can't believe excel requires the sheet to be active to delete from. It will only work if the .activate line is included.
How can you delete from another worksheet without first switching to it?
Code:
'Sheets("sheet1").Activate
Sheets("sheet1").Range(Cells(row, col), Cells(row + 7, col)).Delete shift:=xlUp
I'm looking for VBA code that will:
Hide a sheet whenever it is not the active sheet
I have this macro that looks in all sheets in column A, except the invoice sheet. How do I alter it to only check the active sheet?
Dim ws As Worksheet
For Each ws In ThisWorkbook.Sheets
If ws.Name ("Invoice") Then
On Error Resume Next
With ws
.Columns("A").SpecialCells(xlCellTypeBlanks).EntireRow.Hidden = True
With .Columns("A").CurrentRegion
.Offset(2, 0).Resize(.Rows.Count - 1, 3).SpecialCells(xlCellTypeVisible).Copy _
Sheets("Invoice").Cells(Rows.Count, "A").End(xlUp)(2)
End With
.Cells.Rows.Hidden = False
End With
Err.Clear
End If
Next ws
Is there a way to create a macro to jump to the last active sheet?
For example, the last sheet I was on was Sheet1 and now I'm on Sheet20 and I want to jump back to Sheet1 without scrolling through the tabs at the bottom of the screen.
I have written the below macro to copy data from a sheet called "Fixit Example 1" to a sheet called "Fixit Summary Example". It works fine, but I'd like to be able to run it from any "Fixit Example XX" worksheet. As written, the data is always copied from "Fixit Example 1" regardless of what worksheet I have open.
I tried replacing Windows("Fixit Example 1.xls").Activate with Windows(Active.Worksheet).Activate but got an error "Run time error 424. Object required."
Sub MoveData()
'
' MoveData Macro
' Macro recorded 18/03/2009