Fill Textbox In Each Active UserForm?
Feb 22, 2014
I have over 20 Userform which have one textbox with the same name txtsejobcode1.
Additional I have a UserForm in which user can search for a needed job code.
I wanted that after a user will choose a job code the job code will be added in to the active userform with the textbox named txtsejobcode1.
I could build this:
[Code] ..........
But in the line with Combobox I'm getting a error 438
Run Time error 438 Object doesn't support this property or method.
View 8 Replies
ADVERTISEMENT
May 14, 2014
I am working on a addin UserForm to quickly format cell text, especially only select characters in a cell. I have this functional in a modal setting working with the active cell when I activate the UserForm. What I would like to be able to do is to work in excel without having to close the Userform and have the textbox update with each new cell. I have changed the UserForm properties to ShowModal = false which gets the first half. However the textbox will only show the cell value I started with.
VB:
Private Sub UserForm_Activate()
TextBox1.Text = ActiveCell
End Sub
[Code]...
View 3 Replies
View Related
May 18, 2006
I am attempting to format some TextBoxes from within a For/Next loop. I need a way to check which TextBox is the active TextBox in the loop. Using i as the variable, I came up with this code snippet: Me.Controls("TB" & i).Text = Format("TB" & i, "mm/dd/yy")
If i = 3, this gives me in TextBox3 (which is called TB3) the text 'TB3' and not the value of what is in TB3. It has got to bo something simple, I just can't see it!!!
View 2 Replies
View Related
Jul 3, 2014
I've been using the following code to conditionally format userform textboxes based on a specific value (in this case 2490):
[Code] ........
What I'm looking to do now is amend this so rather than use a specific value, to use the value in a specific textbox on the same userform.
View 3 Replies
View Related
Feb 2, 2010
I need a userform textbox event that fires after I tab or click out of the textbox. Going by the list of options:Beforedragover, BeforeDroporPaste, Change, DblClick, DropButtonClick, Error, Keydown, Keypress, keyup, mousedown, mousemove, mouseup.
I can't figure out which one will do what I want. The change event happens instantaneously which doesn't work. I need to fire off the event when my focus leaves the textbox.
View 11 Replies
View Related
Jul 25, 2014
I need the value of active x control textbox on my worksheet 1, to be copied to a textbox in my userform, that pops up from that sheet....
And I want it to display after the textbox on my worksheet has been updated and the comman button for the userform is clicked...
View 1 Replies
View Related
Oct 12, 2011
Code:
Private Sub cmdSearchButton_Click()
Dim txtbox As String 'stores lookup value
Dim x As Variant 'value for wwid txt box
Dim ForeName As String
Dim SurName As String
Dim wwid As Variant
Dim iPosition As Integer
[Code] .......
Here is my code, it does a vlookup and if the persons name is not found it will split the text entered into forename and surname but when i try and add
Code:
frmAdd.txtForename.Text = "&ForeName &"
frmAdd.txtSurname.Text = "&SureName &"
It actually displays &ForeName & in the text box of the next from rather than what ForeName is..
eg. John Smith -> search button -> user not found msg -> user wants to add user -> string is split into forename and surname -> forename = John , surname = Smith -> display this in the second form.
What code should i be using to do this, i thought that &ForeName & would work.
View 1 Replies
View Related
Jul 27, 2014
I tried looking for everywhere, but i still cant seem to find the solution.. I have an Active X textbox on a worksheet, and I need it's value to show up on a textbox on my userform, that shows up through a command button on that worksheet. I'm fairly new to vba.
View 1 Replies
View Related
Jun 8, 2009
Private Sub UserForm_QueryClose(Cancel As Integer, CloseMode As Integer)
If CloseMode = vbFormControlMenu Then
Application.ScreenUpdating = True
Unload Me
RestrictedOptions.Show
Else
Cancel = True
End If
End Sub
Trying to use above code to unload active userform and show new userform when red X (close) selected by operator. With the code as is, the Unload Me leaves the form on the screen and displays the RestrictedOptions form. If i remove the Restrictedoptions.Show, the Unload Me does remove the original form.
View 9 Replies
View Related
Sep 26, 2008
I have a sheet with 30 textboxes made with the drawing toolbar. The user enters data, then clicks on a button which formats the page to adjust row size to match amount of info. I am having trouble finding the code to store the currently selected textbox in a variable so that I can place the focus back to the same textbox when the macro ends. Can anyone help me with the code to get the active textbox?
View 9 Replies
View Related
Jul 19, 2008
I am trying to do the following.
When Userform2 fires up - there is a textbox.
I would like the textbox1 to be filled by:
Taking the Selected or Active Cell in Sheets("positions"), eg, L5
but then finding the exact Cell match in Sheets("price"), eg, also L5
and placing this cells Value in Textbox1.
The 2 sheets are exact mirrors but contain different data.
View 9 Replies
View Related
Sep 26, 2007
I need to use the Textbox ControlSource in some forms to read specific data from worksheets, different source sheet for each form. How do I tell the ControlSource to look at a specific cell in a specific sheet, rather than just the active sheet? I want to do this using the properties of the Textbox rather than VBA.
View 3 Replies
View Related
Dec 31, 2007
I have a userform with a textbox and a command button. I have used data validations on the textbox. Clicking the command button saves the data in the worksheet. It works well if the user hits tab, enter or down arrow key after entering the data. The problem is, the textbox validations fail to get executed if the focus stays on the textbox and command button is pressed. I want the command button to be disabled until the user has moved the focus away from the textbox -there by executing the validations!
View 3 Replies
View Related
May 23, 2008
I am trying to copy data from a Textbox in a Userform to a Textbox in another Userform. Is it possible?
In Userform1 I have a button from which I can open Userform2 keeping the Userform1 opened. When closing Userform2 I want to copy the data from TextBox2 in Userform2 to TextBox1 in Userform1.
I was trying to guess the code... but it is not working...:
UserForms("Userform1").TextBox1.Value = UserForms("Userform2").TextBox2.Value
View 3 Replies
View Related
Mar 11, 2013
I am desperately find a way to fill down formula from active cell, example given below,
AA
BB
CC
Total
QTY1
QTY2
City 1
5
2
3
10
12
15
[Code] .......
I need to fill down col Qty 1 & Qty 2. Number of Rows and Columns vary in my Work Sheet.
My code below, Ctrl+Enter not works.
HTML Code:
Cells.Find(What:="QTY1").Activate
ActiveCell.Offset(1, 0).Select
ActiveCell.FormulaR1C1 = "=RC[-1]+RC[-3]"
'Fill Down Active Column
Cells.Find(What:="QTY2").ActivateActiveCell.Offset(1, 0).Select
ActiveCell.FormulaR1C1 = "=+RC[-5]*RC[-3]"
'Fill Down Active Column
End Sub
View 3 Replies
View Related
Nov 11, 2011
why the text box "txtjobnum" wont populate with the active cell in my "COMPLAINTS" sheet. The green code below is in the userform and the red text below that is in module 3.
Private Sub cancel_Click()
Unload Me
End Sub
[Code]....
View 2 Replies
View Related
Nov 11, 2006
having trouble with the details of actually making these features work for me. I figured out how to create a UserForm with a ListBox and 2 buttons, but I don't know how to proceed from here.
1. Populate the ListBox in the UserForm with a list of names from the sheet "Totals_Dropdowns", cells K2:K11
2. Make the UserForm pop up and enter the user's selection into cell C40 of the "Regenerate Request"
I know these are very basic operations, and I'm pretty sure I can figure out the rest of my problems once I can get past the above.
View 7 Replies
View Related
Apr 26, 2014
I Have a Userform which Have My Data i Print User Form Using Print Command Button And My Code Is
[Code] ......
But Its Printout Whole Form I only Wants To Print contents of Text Box's Or only Text From Userform TextBox. How To Print out Only Content of User Form Not The Whole Form ...
View 2 Replies
View Related
Apr 9, 2014
I need a simple macro to use for conditional autofill of cells below the active cell (to the end of the sheet) with the text that is being entered in the active cell.
DESCRIPTION: I have two columns of data, the first (call it Col1), has a word number which is unique to each specific word in a foreign language, every cell in this column has a number in it from 1 to 30000. Each number reoccurs many times in cells over the length of this column.
The other column (call it Col2) is blank. As I type words in english in each cell of this column, I need the macro to autofill the text that I have just entered, into every cell in Col2 where it's Col1 number is a match with the Col1 number where I am typing.
For example, in one row, Col1 has the number "21" and I type in Col2 the word "run". I need the macro to find every row where the number 21 is found in Col1 and automatically enter "run" into Col2 at that location.
The macro must only autofill cells which have no data in them. Preferably from that cell down, although if that is not possible, all cells would work seeing we are only replacing blank cells with data.
View 5 Replies
View Related
Jan 12, 2012
Is there a way to use a keyboard shortcut to quick fill down the row for a active list ?
Since the list keeps changing
I need it for a Macro , here is a sample
Item #Length270889931979=LEN(A2)180787908553330666384871330669608284250967244984180793288182, 180792627837130624794197, 130624797531260933577667, 260933529286140676813967380400523014380400518679380400522138400268527381260928469801400268072227, 400268076458190623879469
View 3 Replies
View Related
Dec 8, 2006
I am aware of the ColorIndex, but more specifically I need to change the fill color of a cell that is 9 columns to the right of the active cell. I can't find out how to make this work. to clarify:
ActiveCell + 9 columns.Interior.ColorIndex = Yellow
There has got to be an easy way to do this.
View 3 Replies
View Related
Jun 22, 2006
I am attempting to write an Excel Macro that would allow me to Click on a particular row and have the fields in my form fill with the data in the columns of the row.
I am fairly new to Macros and VBA, but know that this has got to be a possibility.
View 9 Replies
View Related
Feb 12, 2014
I have a userform with listview control with 8 textboxes. i need to add data from textbox to listview before saving the transaction.
presently i have this code.
VB:
In my userform_initialize i have the header And columns For my listview
With ListView1
.View = lvwReport
With .ColumnHeaders
[Code]....
View 4 Replies
View Related
May 15, 2007
On Sheet1 I have four columns populated with data below the following header row titles.
Column1 [A1] = Batch Number
Column2 [B1] = Forename
Column3 [C1] = Surname
Column4 [D1] = RefNumber.
I have set up UserForm1 with TextBox1 and ListBox1 controls. What I am trying to do is open the UserForm, type in a Batch Number in the textbox and fill the listbox with the Forename Surname and RefNumber associated with the batch number.
Example ....
View 9 Replies
View Related
Oct 11, 2006
i have a userform named: usf_History.
i would like to refresh all the text boxes (they either refer to cells or are calculations)...?
View 6 Replies
View Related
Jul 31, 2007
I am trying to insert information from a combobox into a textbox. The issue I have is that the information in the combobox is generated by accessing a network folder and filling the combobox with the names of the various folders. The combobox only generates the first seven digits of the folder...
Private Sub combobox1_DropButtonClick()
Call ShowFolderInfo("j:Consultant ServicesState Projects")
End Sub
Sub ShowFolderInfo(folderspec)
Dim index As Object
Dim fs As FileSystemObject
Dim folderObject As Folder
Dim SubFolders As Folders.......................
View 4 Replies
View Related
Jan 13, 2013
Using Excel 2010. Is it possible to change the default line thickness and fill color when selecting the ActiveSheet Target Row below?
I would like a thin border and a light grey fill - without interfering with any fomatting or conditional formatting that has been applied to the worksheet.
View 1 Replies
View Related
Oct 29, 2012
I want to restrict a textbox to only let the user fill negative values. So first of all he/she shouldn't be able to fill in a text, and only values. And if a value is filled in, then it should be a negative value (automatically).
View 4 Replies
View Related
Jul 28, 2014
I have sheet "MySheet" with data in range A1:B200, when i change or select value in combobox, my textbox will fill. But i need return respective rows in column A inside textbox.
VB:
Private Sub ComboBox_Change() On Error Resume Next
TextBoxCod.Value = WorksheetFunction.Index(Range(MyRange"), ComboBox.Value, 1)
End Sub
View 6 Replies
View Related
Jun 2, 2014
I have a listbox that is automatically filled with data in two columns through a lookup function from a worksheet. That works fine. But now I want to fill the third column with data through a text box, but only in the rows I have selected in the listbox.
My code so far is:
[Code] ....
The number I want to insert into the listbox appears, but not in column 3 in the selected row(s).
View 3 Replies
View Related
