I tried excel help and the great OZ but nothing exactly to my problem.
This is what I would like the formula to do.
Cell S5 would search the solutions cells( K5:O7 ) and compare them to either cell ( R5 for all 3 matching digits) or all combinations cells ( D5:I5 ) if a match is there then it would produce a "Win" if no match it would produce a " Lose "
I will need to be able to expand my range because my data will extend in the solution cells
I have a standard table with quite a few rows. Columns I have are :
Text | Lower number | Higher number
What I would like to do is, in another worksheet, enter a number and I'd like to go through the table and if the entered number is in the range of the Lower and Higher number columns, have the Text displayed.
Using Index Match I can do this if the number matches Lower or Higher number but not if it's between them.
I know that I can return the value of a defined name range, the address, and even the value of the define name, but if you are given a range address, how do you find its corresponding defined name in code?
make this formula more concise and shorter, it was design to check a numbers in a range to see if any of them falls into a particular range.
=IF(SUM((COUNTIF(Fund,">11999")-(COUNTIF(Fund,">12999"))),(COUNTIF(Fund,">21099")-(COUNTIF(Fund,">28729"))),(COUNTIF(Fund,">28730")-(COUNTIF(Fund,">33999"))),(COUNTIF(Fund,">58999")-(COUNTIF(Fund,">59999"))),(COUNTIF(Fund,">82000")-(COUNTIF(Fund,">84999"))),(COUNTIF(FUND1,">11999")-(COUNTIF(FUND1,">12999"))),(COUNTIF(FUND1,">21099")-(COUNTIF(FUND1,">28729"))),(COUNTIF(FUND1,">28730")-(COUNTIF(FUND1,">33999"))),(COUNTIF(FUND1,">58999")-(COUNTIF(FUND1,">59999"))),(COUNTIF(FUND1,">82000")-(COUNTIF(FUND1,">84999"))))>0,"ATTACHMENT E IS REQUIRED","")
and if the any of the number fall into the range it will print the message, "Attachment is Required"
I have a range of values in column A, I wish to add all numbers by all other numbers, i.e for a specific value in the range, I want to add it to all the other values in the range, and output the values in a new range.
For example for values 1,2,3,4 in range A2:A5, I want to output a new range the values;
1+2 =3 1+3 =4 1+4 =5 2+1 =3 2+3 =5 2+4 =6
e.t.c, beginning in range B2. No number can be added to itself.
I have the following columns and rows that I need to MOD by 15. Once they have been MOD, I need to set a range and find all numbers in that range of say, eg; all number between 9.6 and 9.8. Really hope someone can help, have been working on it day and night. I can do them one at a time, but is very time consuming. Is there a formula that will do the whole worksheet in record time?
2/18/1975, 156.7519, 175.8083, 235.4675, 253.765 4/11/1973, 237,7642, 346.5342, 113.3145, 321.435 5/12/1985, 342.7625, 123.4233, 253.4321, 357.234 etc. etc. etc.
I'm going to be using a spreadsheet to keep track of where different people are at. So if Person 1 is in Room 3, I will stick a 3 in the box next to their name and then can look at the spreadsheet whenever I need and see what room they are in. When I'm deciding what room to put a person in, though, I need to be able to quickly glance at a list of Room #'s and see what one's are still available. So I have a bank of Room #'s in the spreadsheet....1,2,3, etc.
What I'd like, is some way to set this up so that when I put, for example, "3" in the cell next to "Person 1" the spreadsheet automatically removes "3" from the bank of available Room #'s and when I delete the "3" because the person has left, it adds "3" back to the bank of available Rooms.
I have a mass of data which look something like this:
table removed
and I require the ranges of reference numbers to be listed in a column one above the other, which requires inserting new rows. I also need the date & description columns copied down into the newly inserted rows.
So basically for example I would want the top row to now read:
table removed
and then apply the same procedure to the other ranges below this.
I have been trying to figure out how to solve an issue. Each month I have a group of customers with data, about 7 columns, and the number of rows varies each month, in the thousands. I want to compare the group from one month to the next. I have been trying to use a named range and have something in VB that compares or matches the ranges. Is this possible? I am having a terrible time getting it to work.
I need to know what has changed, remained the same or completely dropped off. I need the entire row of information carried to a new sheet named "results". The information will be in a workbook with the prior month sheet named prior month data and the new month as current month data. There are headers to row 7.
I copied your macro and works well as long as it's a value.
Sub WithLoop() Dim rCell As Range For Each rCell In Cells If rCell.Value = " Find Me" Then rCell.Activate Exit For End If Next rCell End Sub
I have tried this technique for the following example and am having problems.I want to activate a cell on the date ribbon on the right based on the Reference in cell A1.I have tried all type of methods,no success.
The bottom line is: I want to determine whether a value exists in a column and get beyond #N/A error values if it does not.
I have a range (B15:B26) in which the months of the year that are applicable in a specific situation will be entered using this formula in B16 and copied down to B26:
=IF(D16<$G$5+1,IF(B15<12,B15+1,1),0)
In B14 the starting month is drawn through from G4, e.g. 11 (for November) is entered in G4.
In G5 I enter the term of the investment in months, e.g. 3.
In column D, I start with 1 in D15 and add 1 to the previous cell as you go down column D, e.g. D16 =D15+1.
OK, there you have it, but I attach a file anyway.
Now, I'd like to figure out whether the values 2 or 3 appear in the range B15:B26 once the starting month and the term of the investment have been entered in cells B14 and K5.
If, as an example, I enter 11 (November) as the starting month and 3 as the term, range B15:B26 will show B15=11, B16=12 and B16=1, for January of the new year.
Below that, all cells will show 0, with the result that 2 or 3 does not appear in the range.
I used =MATCH(2,B15:B26,0) to find 2, for example, but if it's not there, it returns the #N/A error value. If it is there, it returns an actual value, and whatever it is, I at least know that 2 is present. This check is in cell I5.
Only the #N/A value shows that it does not exist.
I now want to write an IF function using this error value, but I am really battling with it! If (in cell I6) I use: =IF(ERROR.TYPE(I5)=7,0,MATCH(2,B15:B26,0)). If cell I5 contains the #N/A error (meaning 2 is not present), the aforementioned formula find the answer to the "logical test" true and answers "0". This "0" is easier to use in other functions than the error.type function as far as I am concerned, so I am happy to know that the "0" value in cell I6 indicates that a 2 was not found in the range.
So far so good.
The previous IF function returns the #N/A value if a 2 is found, however!
The MATCH portion of the formula is exactly the same as the other MATCH function in cell I5, so what is wrong with my formula?
What should I do to find out if a 2 (or a 3) exists in the range mentioned?
I am trying to tidy up a large workbook, and need some help with use of range names in the Match function.
I have the formula working on the attached sample, but wonder whether it's possible to get the Match function Lookup Array to pick itself from the range name.
I have a sheet (sheet2) with up to 60000 rows of text. I want to compare column A and B on sheet2 to a range of text (B1:B50) on sheet1. If column A or B on sheet2 doesn't match any of the range of text on sheet1, I want to hide the row on sheet2.
I'm currently using VBA to import sheet2, but haven't gotten really anywhere with hiding the non matching rows.
I have a problem with an offset match function. What I want to do is look at the value in cell C3 and then match it to a location in a named range and then return the value 8 rows above. The problem is the named range contains non contiguous cells i.e. D10:AE10, D22:AE22, D34:AE34. So if the value appeared in the area D10:AE10 it would return the value in the matching column row 2. How to do this I have tried lots of combinations but they just come out #N/A.
I am trying to have a macro to take a value from a text box and see if it is matches a value that is in a specified range. If it comes back true then it shows an error message. This code is working for text values, but if it is numeric it will not find find it.
Sub SearchForMatch() 'Procedure level declarations Dim rngCell As Range Dim bMatch As Boolean ' Loop through each cell in the nominated range For Each rngCell In Range("B4:B50") 'If there us a matching value then set your 'boolean flag to true and exit the loop If rngCell.Value = TextBox1.Value Then bMatch = True Exit For End If
Next 'If a match was found then alert the user If bMatch Then MsgBox ("Name already exsists.") End Sub
I'm looking to use a do until/loop code to find a cell that equals a named range ("Clause") that is located on another worksheet, the code I have so far is:
[Code] ......
I've used something similar before and works, but I just cant get it to work. The values that I need to find the match to the ("Clause") cell are directly below the original activecell.
Is it possible to use Match to find a value within a Named range and then, based on that value, use Match and Index again to find a value two columns across?
I have a list of clients in Column A, with 10 cells between each. In Column B, I have a list of currencies (the same currencies next to each client) and in Column C the rate this client pays for this currency. I want to reference these rates from an external workbook. Is there any way to use Match to locate the client name, then use Index/Match to locate the rate for a particular currency, somehow telling Excel where to look the second time?
I have three columns of data in columns A,B,C - there are formulas in these columns that either produce a numeric value or return blank.
I have created Dynamic Named Ranges for each of them and have entered the following formula: =OFFSET(Working!$A$1,1,0,MATCH(1E+305,Working!$A:$A,1))
My issue is that this formula is looking one row past the last numeric entry in the column (a blank) which is leaving a blank space when I graph this data.
I have a number that I'd like to see ranked within a separate range. Ie if the number is 25 and I want to see how it would be ranked if it were in a range of:
3 43 12 19 22 7 88
(The answer would be 3 - 3rd highest). The RANK formula requires an exact match...
Sub do_it() Dim x As Range Set x = Columns(4).F ind("*test*", lookat:=xlWhole) If x Is Nothing Then GoTo 999 r = x.Row Cells(r, 1) = Cells(r, 1) & " (W)" 999 End Sub
I need the above code to continue down column 4 and add the " (W)" to the entire column. The code stop when it finds the first match.
I get and error which says Procedure declaration does not match description which might be because of ByVal Target As Range if this can not be used than what can be the exact solution for this as i have to get the Target address
Private Sub Workbook_SheetCalculate(ByVal Sh As Object, ByVal Target As Range) Dim sht As Worksheet Dim shtChild As Worksheet Dim lngRow As Long Dim intCol As Integer Dim strValue As String Dim Target As Range Dim rng As Range Application.ScreenUpdating = True Application.StatusBar = False Set sht = Sh............
I have two sheets (Results and August) with numbers in column A, I want to change the color of the cell on Results if its contents matches the number on August. I was feeling adventurous today, so I tried writing some VBA code, but it changes the color of ALL the cells. What am I missing?
Sub FindMatches() 'Compares student numbers on Results sheet to those on August sheet; if match is found then highlights the student number Dim Sht1Rng As Range Dim Sht2Rng As Range Set Sht1Rng = Worksheets("Results").Range("A1", Worksheets("Results").Range("A65536").End(xlUp)) Set Sht2Rng = Worksheets("August").Range("A1", Worksheets("August").Range("A65536").End(xlUp)) Set d = Nothing For Each C In Sht1Rng Set d = Sht2Rng. Find(C.Value, LookIn:=xlValues) If Not d Is Nothing Then Sht1Rng.Interior.ColorIndex = 10 Set d = Nothing End If Next C End Sub
I suspect that I shouldn't be using sht1rng.Interior.Colorindex, as I think that may color the entire range? What should I use instead?
Looking for a macro that takes a range of numbers lets say A1 to A20 and goes down the list adding up the values to the point the sum becomes equal to 6. If the sum is greater than 6 then it backs off one. The sum should be entered in the cell next to where the 6 appeared or where it backed off. Exmaple if A1+A2+A3= 5.3 then the answer 5.3 is entered into cell B3. The trick to this is that I want this formula to loop until A20 is hit.
