Set Relationship - Aligning Equal Text
Nov 15, 2008
I want to bring in text files that result in a single column and then want to be able to align equal text in the column next to each other. I used to be able to do some moderate programming in FoxPro and used a transaction that was called set relationship to field+field, etc.
If there is no equal text in either of the other columns then I have tried to set it to a column by itself. Of course this comes data comes in all in one column with no spaces. I have searched the help files and the net and just can't find a way to do this. I'm thinking this might be attuned to Access more than Excel but I am not proficient in this. Right now I am doing a cut and paste to make this work but some of the imported text have upwards of 800 lines.
View 4 Replies
ADVERTISEMENT
Oct 8, 2006
I have been working for three straight days (and nights!) to accomplish something that is very simple in other languages, but I can't make it work in VB
Column X has, with spaces between 4 possible contents:
3Q
FM
1Q
NM
St1 St3
3Q today
tomorrow
-2
-3
-4
-5
yesterday
FM today
tomorrow
-2
-3
-4
-5
-6
yesterday
1Q today
tomorrrow
-2
-3
-4
-5
yesterday
NM today
tomorrrow
-2
-3
-4
-5
yesterday
3Q today
tomorrow
-2
and so on for 1500 rows.
I can write this in Lotus in about 2 minutes, but VB has me stumped. I hope someone can put me on the corrrect path.
View 8 Replies
View Related
Mar 20, 2014
My application is in vba and I want to log information in text file which required four columns. The tool should open the log file and log the issue and close the file immediately so that other processes running in parallel could also post the issues to it without loss of data. Keep appending to the log file.
Log file should look like: LogFile.txt
View 9 Replies
View Related
Jun 5, 2009
My question is about aligning text in ListBox columns. In a ListBox, I have 5 columns. I need each column's text to be aligned in its own way, independent of other columns. The following explains my need more specifically.
I need the text in column 1 to flush right against column 2, and for column 2 to flush left against column 1. I need column three centered. And I need the text in column 4 to flush right against column 5, and the text in column 5 to flush left against column 4.
View 3 Replies
View Related
Dec 10, 2012
My current spreadsheet shows text that's aligning just slightly to the left of center. In the Format Cells menu under Alignment, I have selected Center for both Horizontal and Vertical. There is no indent. Orientation is 0 degrees. Text is set to wrap. Merge cells is unchecked. Text direction is Context.
When I double click a cell to change the text, it centers correctly as the cursor blinks. But when I click somewhere else and it stops blinking and allowing me to type in the cell, it aligns slightly to the left of center.
View 5 Replies
View Related
Nov 26, 2009
I would like to get to a stage when I can type in a part number and it will bring up other part numbers that were ordered with that part number. Ideally the top ten rather than having a huge lists of hundreds of parts.
I.e The top selling part number in the list is 11511607, I can easily make a formula to bring back all of the order numbers this was ordered on but I don’t want the order numbers, I want the other part numbers on the order in which this part was ordered. I am trying to get to which parts are commonly ordered together and thus should be stored close together in the warehouse to speed up the picking processes.
View 3 Replies
View Related
Feb 11, 2013
I have a column with text + string (e.g., T1000, T1001, etc.)
I have another column that's the same, but sometimes this column has new codes.
Right now I have to "eye" it side by side to see if there are any new codes, but I'm sure there's a better way to do it. I'm thinking of asking Excel to compare the columns and if they aren't equal, then it would be necessary for me to eye it. If they are equal, then I dont have to bother because there are no new codes.
View 4 Replies
View Related
Jun 8, 2009
Got two spreadsheets that should be identical, and in both the column widths ARE identical - when you look at the no. of Pixels. However, the other width is different. So what's the relationship between width and pixels? Is this difference to be expected?
View 5 Replies
View Related
Mar 17, 2014
I have the following datas as an example;
A1: %90
A2: %100
A3: %75
According to those datas I want to get the following results;
B1: On going
B2: Done
B3: On going
So basically I want to tag columns which are equal to 100% as "Done", and the rest is as " On going".
View 2 Replies
View Related
Feb 20, 2013
How to copy paste data as a relationship table.
In attached workbook...when user will click on "Relate" button on "rawdata" sheet....then data should be visible in same form as showing in "relate" sheet...
Book2.xls
View 1 Replies
View Related
Mar 5, 2009
I have one worksheet with 238 rows and another with 163 rows. I want to pull information into the sheet with 238 rows whenever there is a match to a record in the 163 rows. I tried VLookup, but as soon as it gets to a record in the 238 that doesn't exist in the 163 it gives errrors and stops. I've looked at =offset and =offset(match) but I'm not finding anything that deals with the situation of not always being a one-to-one (or even one-to many) relationship. Ultimately I want to pull the Category & Project fields into the records matching on IDNumb in Sheet 1 but Sheet 1 has more records than Sheet2. example......
View 5 Replies
View Related
Aug 8, 2013
I am collecting data the temperature of an animal, i am also collecting ambient temperature at the same time when i plot the two data sets there is an 89% Correlation so i know the animal temperature is affected by the ambient temperature. i want to be able to take this influence of ambient temperature out of the recorded temperature. I dont think its a linear relationship
View 5 Replies
View Related
Jul 19, 2014
I have the following table and i need to be able to present it an indented list of parent child relationship. The hierarchy can go 1000+ levels deep. How do i achieve this using VBA?
OName
OPackID
PPackID
PName
ParentID
Name1
556
556
Box1
389
[Code] .........
If there is a better way of presenting it, it isn't limited to an indented list.
View 5 Replies
View Related
May 31, 2006
I have a excel file which contains Regions Cities and Suburbs in a single sheet. What I need is Regions, cities and suburbs in seperate sheets. Also each must have (except for Region) a unique ID (starting from 1) Name and then the ParentID.
Example:
RegionID Region - for region
CityID City RegionID - for City
SuburbID Suburb CityID - for suburbs.
I have attached a sample file for your consideration.
View 2 Replies
View Related
Jun 8, 2014
I would like to create a formula that will sort the numbers in column B, there are also equal numbers in this column
The difficult part is that there is text in column A, and is linked to the numbers
So if numbers are sorted the names should be sorted in the same way as well.
View 3 Replies
View Related
Feb 19, 2010
I'm trying to find customer loyalty by rep. So I need to find all the accounts that have a loyal relationship with a rep and separate them. All the other reps that sold to those companies are removed. Then I need to find the accounts that still did business with us from year to year, but not with the same rep. Any not loyal accounts are also removed.
The ultimate goal is a pivot table that shows reps on the vertical axis, years on the horizontal axis, with the data being total number of accounts per rep per year. All of the 2008 accounts will be counted, and of the 2009 accounts, only those that were loyal - retained either by the same or a different rep - will be totaled. For this purpose there is no difference between accounts retained either by the same or a different rep, they will be added together. So a rep may have had 10 accounts they sold to in 2008, and of those 10, 5 bought again in 2009, and the rep also picked up 1 account that bought from another rep in 2008. So the rep's totals would be 10 for 2008, and 6 for 2009. I've attached an example workbook to show you what I mean. A "1" in the 2008 or 2009 column indicates the account bought something that year.
View 2 Replies
View Related
Feb 7, 2008
I have an excel file (see sample attached) with a hierarchy with parents and children spread across different columns and rows. However, I am trying to condense it into one column with parents and one column with children. The only way I've been able to do this is by copying and pasting parents onto children rows, which is both a manual and time-consuming process (when you have a lot of rows). I feel like there must be a way to use VBA or a formula or something to get it to work. I have attached a sample, so you can see what I am trying to do (current data and desired data).
View 6 Replies
View Related
May 30, 2008
I'm an experienced Excel user working with very large Excel files that contain many sheets with thousands of formulas referencing various cells on different worksheets. I've been searching for an advanced solution for Excel and I am actually having doubts as to whether it actually exists on the market. (If it doesn't take this idea for free!)
I need a program that could generate a visual map that displays different cells and the links among them. For example, such maps are used in social networking to show connections among people - an example here.
In the end I would have a similar map and it would show me which worksheets are more or less isolated (i.e. don't reference directly any other cells).
View 2 Replies
View Related
Jan 22, 2008
I am looking to select two values from a range based upon their relationship to the maximum value. In this specific case I am trying to calculate the Quality factor based upon the frequency response of a transducer. So I need to identify the Maximum impedance and its corresponding frequency. I also need to identify the 3db points either side of the maximum impedance.
The 3db points are found at 2/3rds of the maximum value of the impedance (Impedance Mag in attached spreadsheet). Calculating the first 3db point isn't overly difficult as I just calculate the value for the 3db point and use the MATCH function to find the closest Impedance value and then work out the corresponding frequency from that. I am stumped as to how to calculate the second 3db point (above the Max impedance value). I have attached a spreadsheet with frequency information in column A, the other columns are used to derive the values found in columns M (Impedance Mag) and N.
View 5 Replies
View Related
Feb 6, 2009
This is a spreadsheet for a real estate office. The boss gave me a spreadsheet that he created to give a seller an idea how much money he will walk away with at closing. The spreadsheet includes all of the pertinate numbers but there is one item that he would like to have filled in automatically. When selling a house, you use a title service that charges a fee based on the price of the house. So, for example, If the house sells for $0 to $50,000, then let's say the fee is $112. If the house sells for $50,000 to $60,000, then the fee is $118. If the house sells for $60,000 to $70,000, then the fee is $125, and so on up to 1.5 million.
The boss' spreadsheet includes 5 different selling price scenarios, which I guess doesn't matter since you do the first one and the rest follow the same pattern.
So how do I automatically fill in a cell based on how one number falls within a range of other numbers? The fee schedule will be within the same spreadsheet, if that matters.
Ideally, I think they should be separate files, but this will be used in various locations as different realtors take it home or use it on their laptops.
View 9 Replies
View Related
Feb 22, 2007
How do I sort out columns aligning them to match data in another column?
Column B is 200 rows long all with data such as FLEZ054246. Columns C is 100 rows long but it will match some from B. I need to align C,D,E with B as long as C & B match. The rows that don't match can be left open for C, D, E.
EX.
Column B Column C Column D Column E
FLEZ054246..........TXEZ061244.........WCG................TX
TXEZ061411.........TXEZ059129..........DOUGLAS...........FL[code].....
View 8 Replies
View Related
Feb 27, 2013
I have a spreadsheet with an example attached. There is data in multiple rows across multiple columns but not all rows and columns have info in every cell. I would like all the information to align to the far left column but stay in their respective columns.
View 7 Replies
View Related
Apr 30, 2013
aligning some data. Cupno has more entries than seqno and there are duplicate entries. I cannot think of a way to get seqno+results to align with cups. If it's possible to delete rows the don't have a corresponding seqno thats ok too. I've attached the example workbook. Sheet1 is the data and Sheet2 contains what ideally the results should look like
View 2 Replies
View Related
Dec 31, 2008
Column A contains the date, every day since 1/2/07 to present
Column B contains a value for that date
Column D has dates within the range in Column A but at odd days (e.g. 4/2/07, 10/2/07)
Column E has data which corresponds to the date in Column D.
Can anyone advise of a formula which can allow me to put the data in Column E in line with the dates on column A rather than the dates in column D?
I want to have in Column C values from Column E that match with the dates in Column A, so for example next to 1/2/07 the cell would be empty but next to 4/2/07 in column A would be the value corresponding with that date in columns D & E.
View 9 Replies
View Related
Feb 22, 2007
How do I sort out columns aligning them to match data in another column?
For instance.
Column B is 200 rows long all with data such as FLEZ054246. Columns C is 100 rows long but it will match some from B. I need to align C,D,E with B as long as C & B match. The rows that don't match can be left open for C, D, E.
EX.
Column B Column C Column D Column E
FLEZ054246..........TXEZ061244.........WCG................TX
TXEZ061411.........TXEZ059129..........DOUGLAS...........FL
TXEZ061244.........TXEZ061101..........ERNIE...............TX
TXEZ061101.........FLEZ059314..........JASON...............FL
FLEZ054336.........TXEZ064240.........ERNIE................FL
TXEZ063075........TXEZ059503.........MICHEAL............TX
FLEZ060652.........TXEZ059027.........CLAIRE...............TX
FLEZ-054341........TXEZ059063.........CLAIRE...............TX
TXEZ060723.........TXEZ059164.........PAUL..................FL
TXEZ059503
FLEZ059314
TXEZ059164
TXEZ059129
TXEZ059063
TXEZ059051
TXEZ059027
I need it too look like this:
Column B Column C Column D Column E
FLEZ054246..........FLEZ054246...........ERNIE................FL
TXEZ061411
TXEZ061244.........TXEZ061244.........WCG..................TX
TXEZ061101.........TXEZ061101.........ERNIE.................TX
FLEZ054336
TXEZ063075
FLEZ060652
FLEZ-054341
TXEZ060723
TXEZ059503.........TXEZ059503.........MICHEAL............TX
FLEZ059314..........FLEZ059314.........JASON...............FL
TXEZ059164.........TXEZ059164.........PAUL.................FL
TXEZ059129.........TXEZ059129.........DOUGLAS...........FL
TXEZ059063.........TXEZ059063.........CLAIRE..............TX
TXEZ059051
TXEZ059027.........TXEZ059027.........CLAIRE..............TX
View 6 Replies
View Related
Apr 24, 2014
I want to create a report using power pivot while creating the relationship between the linked tables, power pivot is throwing error "The relationship cannot be created because each cilumn contains duplicate values. Select at least one column that contains only values"
View 1 Replies
View Related
Jan 18, 2014
I work on graphics which show financial data. The base is day data together with calculated added values the graphic worked and showed good pictures.
But now I encountered a problem with the graph - related to not listed days, points are "generated" which do not be in line with the rest of the data !?
EXCEL_Forum_20140118.jpg
View 1 Replies
View Related
Apr 23, 2013
I have a data set with raw data from an online survey with >2000 rows of data, with each row varying in width from 2 columns to 4 columns wide of data, located in columns A through D. Each row has the value 2 in it as well as some additional values on either the right or left side (the location of the value 2 varies -- so it's not always in the same column). Picture attached of some example data for clarification:
Picture 1.png
I want to figure out if there is a function that can align all of the 2's in the same column -- let's say Column C -- while maintaining the same data that was to the right or left of the 2 (up to two values on either side) before all of the 2's were aligned in the same column.
I could certainly manually align the central column by copying and pasting repeatedly, but that would take an incredibly long time -- and I am sure that there is a better way to do this. I can use a VLOOKUP function to align all of the 2's in a column as well as everything to the right, but I have tried using the INDEX and MATCH functions to do a VLOOKUP to the left, but this doesn't seem to be working because the source column (where the number 2 is) varies by row, so it doesn't match in the same way that a VLOOKUP function does.
View 5 Replies
View Related
Jul 2, 2013
Any way to vertically and horizontally center an autoshape in a cell without VBA. I created a shape and placed it in a cell but don't think it is centered. Also, if I add shapes to adjacent cells, I would want them all to be centered directly in the middle of the cells they are in. Using the align feature only seems to make sure the shapes are aligned to each other but doesn't seem to put them in the center of their respective cells.
View 1 Replies
View Related
Jul 24, 2014
Is there anyway of aligning part of a formula to a certain character limit (63)?
For example:
Aaaaaa(A1), bbbbbbb(B1), 1111111.00(C1)
Aaaa(A2), bbbb(B2), 11.00(C2)
to
Aaaaaa(A1), bbbbbbb(B1),____________1111111.00(C2)
Aaaa(A2), bbbb(B2),______________________11.00(C2)
View 1 Replies
View Related
