I would like to create a shortcut to averaging ranges. The ranges vary in size so I want to be able to click on a cell. Press Ctrl + W and automatically average the cells above it. I know how to get the short cuts, I just can't figure out the proper code to be able to average based on different sizes. Let me know if you need a better explanation./
View 3 RepliesThe following macro works when I run using Alt+F8+Enter
The macro also works when it is linked to a button on the worksheet.
However, it does not work when I try to use the keyboard shortcut Ctrl+Shift+P.
I've tried adding the shortcut key code into the macro -- still doesn't work.
I've tried changing the shortcut key to a different letter
I want to disable ALL shortcut key functions in my program. (i.e. if a user presses Ctrl+S it will NOT save, Ctrl+O will NOT open file, etc).
Of course I need this enabled again in something like workbook close for users to have this ability in other workbooks.
I am using Excel 2007 and I would like to move one tab to right with "Ctrl+Tab" and move one tab to the left with "Ctrl+Shift+Tab".
Macros will not let me assign "Ctrl+Shift" keys (that I could see). How can I accomplish this?
I am trying to use these exact keys because my mouse is setup so that leaning the scroll wheel left or right moves left or right in my tabbed applications by executing a keyboard shortcut. This works in all my applications except excel where the shortcut keys are different.
I'm working on a VBA program prepared for accounting purpose. In that program i hide the excel ribbon by custom UI and also need to restrict excel's shortcut keys commands to run.
Can i do this with some VBA code.
I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e.
First dynamic range: called "Milestones" at A11
Second dynamic range: called "Activities" at A25
& make a Validation list that will list content of both
I would like to replace the blue bit of this Dynamic Named Range (DNR) with an INDIRECT formula in order to modify the starting point for the DNR: =OFFSET(DATA!$C$60,0,0,20,1). Unfortunately, I can’t seem to get my INDIRECT formula to work in order to use it to replace the blue bit above: INDIRECT("'"DATA"'!&ADDRESS(MATCH('SHEET1'!AC8,DATA_Date,0)+22,3)"). The orange bit of the formula above returns a value of 60, therefore the ADDRESS formula should return $C$60, that can then feed into the INDIRECT and act as the equivalent of DATA!$C$60. But it doesn’t.
View 2 Replies View Relateddefinitions for static ranges and dynamic ranges?
View 9 Replies View RelatedI'm trying to calculate the average of every five rows. I have a formula =Average(A1:A5) in cell B1. When I do an autofill in B2, the formula would read =Average(A2:A6). What I actually want it to be is =Average(A6:A10), increments of 5. I don't know what i'm doing wrong. I have also tried selecting all the B rows and doing autofill and that still doesn't work.
View 3 Replies View RelatedI have a list of grade from 2~4 (i have long list but for sample i made it short). I want to get average of all grades one by one as well as by making some groups. Like 2,3, "2~4" (all groups) then "3~4". All the things were going nicely with a drop down menu. But when i put average on grde "3~4" only then the problem occurred. Although I've done my work but still I think there must be some improvements.....
View 6 Replies View RelatedI would like to get a monthly average between the first of the month & the end of month of a handful of percentages collected during the month for individual projects.
View 10 Replies View RelatedI want to create dependent lists using data validation. The lists need to be created from ranges that will be growing as users add more data. I think the best way to create the list is a VLOOKUP. However, I am not sure how to use the VLOOKUP when the range is changing.
I have attached an example. I have a list on sheet "Vlookup" called "FRUIT" with "apple", "orange", "banana". Then to make the depedent lists I have created three other lists called: "APPLE", "ORANGE", "BANANA". I want to pull the COST from sheet "VALUES" into the lists "APPLE", "ORANGE", "BANANA". Users will be adding costs next to the FRUIT they purchase.
I have a particular issue - i am trying to create a rolling correlation.
lets say you have two variables for 3 different months:
Month1 a x
Month2 b y
Month3 c z
correlation will correlate a-c with t-v
however, come next month - i have to manually drag the ranges for a rolling three month correlation:
Month1 a t
Month2 b u
Month3 c v
Month4 d w
correlation will now correlate b-d with u-w for a the last three months.
I want to automate this as I know what the month is, I can't seem to return the last three months and correlate the data.
I have tried to do this with the database functions, but I think that they break the array relationship of b-d and u-w in the correlation function.
In the example I have attached, I need 4 named, dynamic ranges to build a chart with:
1) Dates for the chart
always starting from A2 ... to whenever the LAST sum of B, C, D =0
(right now that would be A2:A30)
2) The Amounts
I need the amounts as 3 individual dynamic ranges, with no 0 values
(example - B2:B21, or c10:c14, etc)
3)The date column
same as #2, but just a single cell reference to show as a marker on the chart.
(example e21:e21)
I know someone here will think 'so what's the big deal' and pop it out in 30 seconds.
I'm trying to make ranges in a SumProduct formula dynamic, but getting errors #N/A. I think this is because the top two rows are headers, throwing off the range count.
Q. How do I adjust the range definition to compensate., e.g.
Range =Offset(Sheet1!$D$3,0,0,COUNT(Sheet1!$D:$D),1) where column D is numeric, and
Range = Offset(Sheet1!$T$3,0,0,Match("*",Sheet1!$T:$T,-1),1) where column T is text?
I had assumed that the offset value 3 would do this, but I suspect the functions count and match are not doing so.
I am trying to create a vlookup to get a count of trouble tickets techs completed daily within a table I created, I am using a table since its dynamic. For example I need to see how many tickets Joe completed in a day. See below...
Tech Ticket# Comments Status
Joe 1234 Replaced HD Closed
John 3212 Replace Motherboard Closed
Joe 5678 Installed OS Closed
Above is just an example (my table has 40 columns). I need to vlookup joe and get the count of the closed tickets.
So I was looking for reassurance or validation more than anything. From what I can tell you can in order to build a chart that is dynamic throughout a range, you use the offset and count or counta function - 1. That part isn't a problem. My question is once you created that for your charts do you just normally plot your chart range or do you have to reference the named range directly into the chart range?
View 2 Replies View RelatedI have monthly sales, and i wanna be able to sum the last-twelve month sales, when i select the month from a drop-down list. For example, when i select Feb14 from the drop-down, I want the formula to sum the sales between mar13-feb14. how can i accomplish that?
Select Month
Feb14
LTM Sales
?
[Code] ..........
Dynamic named ranges - lots of them! ...
View 9 Replies View RelatedI have a stock chart that I want to update dynamically if the data record length changes. From the source data menu, I tried to use the following data ranges:
=OFFSET(Candles!$AB$8,1,0,COUNTA($AB:$AB)) ---> Date, x values
=OFFSET(Candles!$AD$8,1,0,COUNTA($AD:$AD)) ---> High
=OFFSET(Candles!$AE$8,1,0,COUNTA($AE:$AE)) ---> Low
=OFFSET(Candles!$AF$8,1,0,COUNTA($AF:$AF)) ---> Close
When I place any of these in the data range box under 'x axis labels or values', I receive the message "This function is not valid".
The MS webpage at http://office.microsoft.com/en-us/ex...098011033.aspx describes using these formulas but they don't appear to work.
I am creating a consolidation worksheet. It contains a macro that automatically copy data from other sources and paste it into my DB sheet. It already works, but I want to improve it. The source worksheet databases has been defined with the name “SOURCE”. Is there any way that I can make my macro look for this dynamic ranges directly, copy and paste it into my DB sheet. I am attaching an example of what my current macro is doing.
View 2 Replies View RelatedI've got a spreadsheet that I download a list of information into. The information relates to activities that are taking place e.g. start time, end time, type of activity (e.g. meeting) and duration (which identifies the length of the activity in 30 min slots e.g. 9.30am - 11.30am = 4).
The rest of the columns are labelled to represent the time in 30 min slots starting from 9am. What I would like excel to be able to do is to identify the first cell in the range which would be the cell that represents the start time in the row. Then from this cell fill cells in the row up to the end time with something - it doesn't matter what as long as the cell can be differentiated from the other blank cells in the row.
I don't think that I've explained myself that well so I've attached the spreadsheet for you to look at.
I'm having a fit with this formula; maybe the gurus will show me what I'm doing wrong. I have a list of area numbers along with dollar amounts that go with these area numbers. I have created a named range named "Areas" and another one named "MO_PD".
At the bottom of the worksheet I am doing a recap that takes the area number and sums all the entries in the MO PD column. This approach has been done before with Thomach's help. I'm trying to mimic it, but it's not working for me.
NOTE - I know that I can get around this using a pivot table, but I would like to use this approach for now. I would at least like to know what I'm doing wrong. Also, I'm not totally sure if I did the dynamic named ranges correctly so that may need to be fixed.
I've been working a macro that seems pretty simple, but has been giving me loads of trouble. I have about 20 worksheets in a Workbook, which all have a similar template (i.e. the data I'm interested in starts on row 14), but have different amounts (rows) of data in them. I want a macro that sorts all the data in ascending/descending order according to column Q. The problem that I am running into is not that the macro only works for the sheet that is active when I run the macro as opposed to every single sheet in the workbook ....
View 4 Replies View RelatedDoes COUNTIFS not work with named ranges/dynamic ranges? Everytime I try, I get a #VALUE! error. These are my 2 dynamic ranges:
ResultsM=OFFSET([results_list.xls]Results!$M$4,0,0,COUNTA([results_list.xls]Results!$M:$M),1)
ResultsQ=OFFSET([results_list.xls]Results!$Q$4,0,0,COUNTA([results_list.xls]Results!$Q:$Q),1)
The formula is simply:
=COUNTIFS(ResultsQ,"GENDER",ResultsM,"MALE"
However, this does NOT work. it returns the #VALUE! error. However, odly enough, when I use column references, it works:
=COUNTIFS([results_list.xls]Results!Q:Q, "GENDER", [results_list.xls]Results!M:M, "MALE")
This makes me think that COUNTIFS just don't work with named references..
I have just upgaded to Excel 2007 and previously used a Dynamic Range Wizard addin in Excel 2003 but it does not work in 2007. I think it originally come from Robert Bruce but can not find it on the web to get an update.
View 2 Replies View RelatedI'm trying to figure out a formula that will give me monthly average (per person) on the following report. The problem is that people start at different times and sometimes they don't produce in a given month after they have started. Basically I'm trying to get a monthly average from starting month to the last full month, in this case January.
View 8 Replies View RelatedWorksheet A - I've set up a dynamic range to display the last 12 row entries of 2 columns
Worksheet B - pivot table of the range
The dynamic range is working perfectly, it displays the correct rows I can set up the data source once... the results on the pivot table display corectly
Problem When i press refresh, the data source "dissapears" and i have to rebuild the pivot table.
I have 153 rows of data to name, with a different offset formula per row.
View 8 Replies View RelatedI have a question regarding dynamic validation. I have attached a sample spreadsheet to clarify if my explanation doesn't. I have a list of codes that map to a list of other codes that are not one to one mapping. I would like for the other users of this code to populate what the correct code on our side is but without having to go thru the entire list in a validation field. (if that makes since)
Using validation before in a similar instance i used indirect to grab a named range to help shorten the list for them. However in this case that would be a ton of ranges i would have to set up! I've tried Match, countif and index in an offset formula in the validation list but can never get it to work!