Worksheet A - I've set up a dynamic range to display the last 12 row entries of 2 columns
Worksheet B - pivot table of the range
The dynamic range is working perfectly, it displays the correct rows I can set up the data source once... the results on the pivot table display corectly
Problem When i press refresh, the data source "dissapears" and i have to rebuild the pivot table.
I have a data set that is defined as a table (Ctrl + T). There are formulas so I locked those cells and Protected the sheet. If I am at the bottom right cell, and press Tab to add a new row, I get an error message: "Cannot use this table functionality on a protected sheet"
I really need to protect the cells with formulas so that the are not accidentally deleted. But I also want to retain the Table format.
Is there a way around this without using VBA?
I am trying to solve in VBA how to create pivot tables in new sheets using objects instead of relying on the sheetcounter, which errors out.
I found an old Tip on Mr. Excel: Excel Create and name a new worksheet with VBA
But I can't figure out how to apply the object to the rest of the script. Here is what I have so far:
Sub Macro2()
'
' Macro2 Macro
'
Dim WS As Worksheet
Set WS = Sheets.Add
'
[Code]....
I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e.
First dynamic range: called "Milestones" at A11
Second dynamic range: called "Activities" at A25
& make a Validation list that will list content of both
I have a pivot table in the first sheet which includes the field "Date" as a column label.
In the remaining sheets, except for one, there are pivot tables based on the same underlying dataset which also include the field "Date" as a column label.
I would like to adjust the selection (i.e., exclude some dates) from the column label in the first sheet and see if it is possible to make the same adjustments automatically to the pivot tables in the remaining sheets as well.
note that the field "Date" is used as a Column label, i.e., it is not a Report filter.
I have a single workbook with multiple worksheets. Each worksheet has a different pivot table displaying a different view of the data. Each pivot table uses the same source data at worksheet1.
Each week i add new data to the end of the source data, which means that I need change the source data reference separately in each pivot table to update each pivot table view to include the new data. This is laborious as there are quite a few pivot tables.
Was wondering if there is some way of changing the pivot table source data reference on all pivot tables at the same time.
I would like to replace the blue bit of this Dynamic Named Range (DNR) with an INDIRECT formula in order to modify the starting point for the DNR: =OFFSET(DATA!$C$60,0,0,20,1). Unfortunately, I can’t seem to get my INDIRECT formula to work in order to use it to replace the blue bit above: INDIRECT("'"DATA"'!&ADDRESS(MATCH('SHEET1'!AC8,DATA_Date,0)+22,3)"). The orange bit of the formula above returns a value of 60, therefore the ADDRESS formula should return $C$60, that can then feed into the INDIRECT and act as the equivalent of DATA!$C$60. But it doesn’t.
View 2 Replies View RelatedI currently have several pivot table that's linked to a single pivot table(let's call it X) in the same workbook. I'm doing this to limit the file size because the data in X comes from a text file that has millions of lines. However, it's such a pain every time I need to update the tables because simply clicking "refresh" does not update those tables that are linked to X with new data. I would have to instruct the wizard in every linked table to point to X every time. I'm trying to write a small program to re-point to X for each of those other pivot tables whenever i refresh data. However, after trying to record the steps to do this I'm still unable to run these
Sub Macro1()
ActiveSheet.PivotTableWizard SourceType:=xlPivotTable, SourceData:= _
"PivotTable1"
End Sub
Is it possible to create pivot table from another multiple pivot table.
Example: I have two diff pivot table "Income" and "Expense" as well
and I need to preapare new pivot table using with those two pivot table
I have 12 months worth of data in twelve separate workbooks each with a pivot table, I have copy/moved the pivot table tab from each into one workbook so now I have a workbook that consists of 12 tabs each with a pivot table. What I would like to be able to do is create a summary table with the full years data; where I am running into problems is that each months table has slightly different row and column counts and labels making any formula like =sum([sheet 1 cell a1]+[sheet 2 cell a1]) problematic.
View 3 Replies View Relatedif there is a way to display a table as column percentages but have the totals as raw numbers.
View 9 Replies View RelatedI've got 4 pivot tables (all derived from the same base data) on 4 separate worksheets. I've been able to (with this help of this site) to use VBA to hide pivot items on all of these sheets using a list on a user form. Hide/Show Pivot Table Field Items. Hide Pivot Table Fields Pivot Items by Criteria
I now need to be able to show all the pivot items on only 3 of the 4 pivot tables, with the 4th pivot table being left untouched. For ease assume that my sheets are sheet1, sheet2, sheet3, and sheet4. The tables I wish to update are on sheet2, sheet3 and sheet4. The pivot table on each sheet is called "PivotTable4" and the pivot item is called "Business". The pivot item contains 12 business names (Business1, Business2 etc etc)
Is there an easy way of doing this? I've spent the day looking through the internet and various "Dummies" books but with little success, I fear that I'm obviously below even Dummy level
definitions for static ranges and dynamic ranges?
View 9 Replies View RelatedI have a spreadsheet that records the date, specific sporting activities and cash award for participation in a round robin sporting event that was held over 52 weekends. I'm trying to lookup the cash award value of each event the person participated in by using a date range within the vlookup formula.
Each participant has their own spreadsheet which they are able to access via server, and each spreadsheet looks a bit like this:
-Column A contains the date of an event in which the person participated
-Column B contains a category number related to the type of event eg marathon = 12, hurdles = 15, relay = 18 etc. This info is manual input
-Column C contains the amount the person will be awarded by simply participating in the event. This is a lookup value and varies depending on the date the person participated, so I'm trying to incorporate date ranges and 'if' formulas into the vlookup
I'm from Australia so my dates might be backwards...
Spreadsheet:
A B C
1 02/01/13 15 (supposed to be $10)
The formula should read a bit like this:
if (date at A1 is within date range 1st Jan 2013 and 31st March 2013, lookup B1 in table 1 column 2), if (date at A1 is within 1st Apr 2013 and 30th Jun 2013, lookup B1 in table 2 column 2)...etc for each quarter
I don't know if the following is right
=IF(AND(A1>='01/01/2013'+0,A1='04/01/2013'+0,A1
I have 7 sheets including the table as you can see on the attached. Now, each sheet is allocated to individual items e.g. item 10, item 20 and so on. I can't figure out how to return all the Item 10, 20, 30 ... to the corresponding sheet. It says Item 40 to all sheets.
View 8 Replies View RelatedI have done all the computation and final output was in the form of tables with different solution sets in one worksheet in an excel.
From the dropdown list (List of solution models), when I select one solution set it should pick that particular workout and populate the final output table in the new worksheet in the same excel. Firstly, I need to establish dynamic linkage between the drop down list and final output tables and then push the final table to new worksheet based on the option selected.
I have a 8 pivottables with a graph for each. is there a way that i can have a dropdown menu to select which graph to display instead of having all these graphs everywhere....
View 4 Replies View RelatedI have an issue with printing a worksheet with a pivot table. When refreshing the table, depending on the filter choices, the table length with expand and contract. When the pivot table contracts, it leaves a light blue shaded area. If you try to print the worksheet it includes the blue section. Is there a print macro that can be written that will only print the sections with values or perhaps a print setting that would exclude the shaded area?
View 1 Replies View RelatedWhen in a worksheet and clicking in the pivot table results, the pivot tables no longer display.
I did have a reinstall of Office last week but can't see how that would have impacted this. Otherwise, I only use the pivot table command to 'refresh all'.
I know very little about them and didn't create this workbook.
I do add entries to the source data and have tried to change source data but I get Reference is not valid.
When I run pivot tables, the row label descriptions are only displayed at the highest level for each category. As displayed below the highest level on the row label is MOB and is only detailed in the first row. I need for each of the different row label levels to display the data so there are no blank cells.
MOBMan. Boxset 2Large1328Manual StickeringN/A500Shrwp 13+Large16680Small596Shrwrp 7-12Large35704Small2411SW 1-6Large87912Small14635SW w/ PremLarge26966OUTDisplay Lvl 1Small100Klutz Standard Display 6-packN/A2499Man. Boxset 1Large40000Man.
[Code] ........
All I want to do is write some vba script that inserts a pivot table based on all of the data in my current workbook.
Therefore I want something incredibly simple if it exists like:
ActiveWorkbook.PivotCaches.Create(SourceData:= ActiveWorksheet.Select.AllData)
ie the vba code that just takes the data you've got in your current worksheet and creates a pivot table.
I have four sheets with a lot of pivot tables on each and my problem is that whenever I hit Refresh the formatting of the pivot tables is always changing. It seems that this is something of an issue in Excel 2010 and that they only way to truly get around it is to re-format the pivot tables upon refresh with VBA code.
Any resource or thread I can use to learn the commands to format the pivot tables?
I am getting better with VBA code but seems to always get stuck on trying new things because I do not know the commands.
I'm trying to sync a common field in two different pivot tables.
I have 2 pivot tables on a single worksheet.
Each table has its own data source - 2 different databases (had to set it up that way to present all the data requested).
The 2 data sources have one column of data in common. This column is called Projects and all project names are the same in both databases.
BUT...
Pivot Table 1: Projects is in the ROW area (multi-select dropdown)
Pivot Table 2: Projects is in the PAGE area (single select drop-down)
I would like to link the Projects data items so that when I select a project name in the Combo box, the same project name would seamlessly be selected in both tables.
Each table would populate with its own data based on the project selected.
Basically, I'd like to use the method illustrated in this Flash file:
[url]
This method would have worked beautifully if it weren't for this reason:
Table 1: Project data is in the PAGE field
(single selection)
Table 2: Project data is in the ROW field (multi-selection)
If the Projects data was in the PAGE field in both tables, my code would look like this:
ActiveSheet.PivotTables("Table 1").PivotFields("Project").CurrentPage = _ActiveSheet.Range("X1").Value
ActiveSheet.PivotTables("Table 2").PivotFields("Project").CurrentPage = _ActiveSheet.Range("X1").Value
But no, because the ROW field is a multi-select one, I get this kind of
I have several pivot tables that need to be re-linked to an Access database (really change the link to a different month's data). Currently, I do this manually, but I was hoping to write a macro to do this. Data is saved by month so I can't just create a "current" file as to not change the links each time. I can only get code to work for the refresh portion.
View 9 Replies View RelatedI have used the macro recorder to create a macro that creates a pivot table from data located on another workbook.
with this said i have two questions.
How can i make it so that the workbook containing the data for the pivot tabel does not need to be open?
the second question is why am i gettign stuck with a macro that sticks right here:
Is there a code I can use to update pivot tables e.g every 10 mins?
View 9 Replies View RelatedI am working with VBA to create a pivot table, and have done just fine so far. However, I need to create a two buttons that will run the following macros: 1. A macro that will remove the selected header (either row or column) from the pivot table.
2. A macro that will put the removed header back into the pivot table.
I need to be able to click on the header (whether its the row or column header) and then press the button to remove it from the table. The second button should then add that header back into the table. My code for creating the table is fine, I just need to work out the buttons. Below is what I have so far. I was think that if I had variable for the header name it would be able to tell which header to remove (so I used Set iField = ActiveCell.Value), I also tried ActiveCell.Text. All I need to do is put the text in the selected field into the PivotFields range to make it hidden. However, I keep getting an error (Compile Error: Object Required) on the line Set iField = ActiveCell.Value. Below is my current code.
Sub PivotTable()
ActiveWorkbook.PivotCaches.Add(SourceType:=xlDatabase, SourceData:= _
"'Pivot Table Data'!R1C1:R1892C7").CreatePivotTable TableDestination:="", _
TableName:="PivotTable1", DefaultVersion:=xlPivotTableVersion10
ActiveSheet.PivotTableWizard TableDestination:=ActiveSheet.Cells(3, 1)
ActiveSheet.Cells(3, 1).Select
ActiveSheet.PivotTables("PivotTable1").AddFields RowFields:="Product", _
ColumnFields:="Location"
ActiveSheet.PivotTables("PivotTable1").PivotFields("Sales").Orientation = _
xlDataField
ActiveWorkbook.ShowPivotTableFieldList = False
End Sub..................................
I wonder if it is possible to make calculations between two pivot tables which have the same number of columns and rows and put the outcomes in a third pivot. For example Pivot 1 contains revenue data, Pivot 2 contains cost data and Pivot 3 provides the calculated outcome of revenues minus costs.
View 7 Replies View RelatedIs it possible for me to compare two pivot tables and get a report. in the attached example, is it possible to compare sheet1 and sheet 2, if the values haven't changed, then it should be green, or it should be red.
View 3 Replies View RelatedI read in your "best Practice..." sticked above that it's better to use Pivot tables then multiplied criteria SUMPRODUCTs (or array formulas). i agreed with it because i found it took long time to recalculate the sheet. do you suggest it refering the new SUMIFS formula?. i found that a SUMIFS that refers to Tables can be replacement for GETPIVOTDATA. In my sheet there are several dozens of GETPIVOTDATA.
View 4 Replies View Related