I have a problem in copy formulas form one cell to another, my formulas are writen in one workbook in this way... '=Dog+Cat.
The problem is that I did a looking table code (vlookup) and when it shows the formula I have #żName?.
I would like to knw if there is a way to fix this using the vlookup or I'll be obligated to use special Copypaste
I have copy 65'000 formula text cells from a software and paste it to excel. But, the formula in cell is not activated. In order to activate the cell formula, I have to click on each individu cell and press enter to active it. But i got
65'000 rows of the similar cells. So, what is the quick way to all the text formula at the same time.
with a macro. I am looking to copy row 2 to the last row and past the copied rows directly below the copied contents.
View 9 Replies View RelatedIt's been a long time since I have worked with Excell, it use to be the " $ " that made things absolute or relative.
I have this formula:
='1'!C194+C193 on sheet 1 named "1" without the " ". I need to copy it across 31 sheets. I thought that it was the " ! ", without the " ", that makes the address absolute so I took it out and then attemped to copie it to other sheets. The idea was that the formula would then read: ='2'!C194+C193 on sheet 2, and ='3'!C194+C193 on sheet 3 and so on. The formula is in the exact same location on each sheet, C194. But this won't work. I am at this time doing each formula one at a time. I have many workbooks that will use the same style of copy and paste; about 15 workbooks each with 31 sheets.
It would help if someone could explain how to save time. I do know how to use the Ctrl to select different cells and how to use Ctrl+Page UP/Down to change tabs. I just have to get the formula correct.
I have a formula that basically copies a cell into another workbook if 'other' is entered into the column to the right. i,e cell A1 has 'other' B1 has '100', the figure in B1 is placed into another workbook cell. The results are only shown if a month is selected from a drop down on the 1st workbook with the meta data.
What I want to do is to add a command to the formula below so that it will recognise that after the first item is entered it will look for the next data item and not just repeat the first….
{=IF($L$92:$L$580="","",INDEX($L$92:$L$580,MATCH(1,(TEXT($C$92:$C$580,"mmmm yyyy")=TEXT($E$5,"mmmm yyyy"))*($L$92:$L$580<>""),0)))}
In the attached worksheet is an example of what I want (table 2) and what I'm currently getting (table1)…
I am trying to write a macro that will allow me to copy the text of a cell, and then insert text around that previously copied string. I am having a problem adding the copied text into my formula. Here is my code below:
Sub Bid()
'
Selection.Copy
ActiveCell.Value = "inventory levels are " & ActiveCell.PasteSpecial(xlPasteValues) & " and oversold by"
ActiveCell.Offset(1, 0).Select
End Sub
I am looking for a formula that reads down when drug to the right.
I am trying to copy a formula down a row. All I am getting is the exact same answer from the 1st cell instead of the new data.
View 9 Replies View RelatedSuppose I have 100 worksheets in a workbook ( named 1,2 3 ........100) in a collecteve sheet ( I have a coulmn of 100 same formulas refering to the same cell in all the 100 worksheets)
for example :
'1'!$a$1
'2'!$a$1
if I drag the first formula Fill Down With Fill Handle then, the sheet name will be the same all the way down(1) , which is not correct , so I have to go bach and modify them manually , which is very boring and mistakes could easily happen
I have written a macro that copies a row to a new sheet and adds a formula to that copied row.
View 8 Replies View RelatedI have a worksheet. In sheet3 The value of column L2 is the value of column M2 in sheet . Everytime I copy the new sheet, I have to re type the formula for this new sheet. Is there a way to give formual such that when I copy new worksheet the formula will come automatically as it always has to link from the M2 column of the previous sheet?
View 9 Replies View RelatedMy goal is to sum up the total sales and total forecasted sales of each cost center. I compiled a formula that is supposed to do this just as I want it to. Simple enough. However, for some odd reason the formula returns either the totals of ALL cost centers or just a zero instead of the correct result. The weird part is that when I check the formula by pressing the "insert formula" button it suggests that the formula actually should produce the desired result.
View 5 Replies View RelatedMy worksheet "Ledger" has a column of 1-31 days, with row headings of MC/Visa, Amex, Disc & Cash. I also have sheets "1-31" within the same workbook that contain the data I need under each heading. I can get the data for "Amex" in sheet "1" to appear in the first cell underneath "Amex" in the sheet "ledger" by typing the formula ='1'!$B$29.....
View 6 Replies View RelatedI need to create forumulas for fed,state,medicare,and fica taxes. It has to be an absolute forumula where i use percents. One would be i have my gross pay in column e5, my fed taxes which is 18% in f5, but the 18% is above that in F4.
View 3 Replies View RelatedAs you would normally use indirect formulas so the cell references don't change. Which that is what I want in the end, but I need to copy them to an indefinite number of cells first and would like to not do it by hand. I have found some solutions to similar questions/problems but cannot figure out how to make them work for me. So, what I am looking to do is this... (I have also attached the spreadsheet for reference)
I have gotten the information in columns A through F on the first sheet to update as rows are added, moved, deleted on the second sheet using Indirect range. Also, I could do this for Column I (Copmleted Proj. Avg. Terminations) but I would have to do it manually (as I began doing in I3, I4 & I5) but that would be time consuming. So I am hoping there is a way I can copy the formula down the cells are updated for the initial copy but then don't update if the referenced cells are moved or deleted.
I want cell B4 on sheet 3, to show the value of cell B4 on sheet one ... only if there is a value in B4 on sheet one then i want the rest of row 4 to be copied to sheet 3 also.
HOWEVER if the value in cell B4 sheet 1 is BLANK/EMPTY then i want the full row to be over looked and the next row to be checked (B5 all the way to B30)
Once B4-30 on Sheet 1 has been checked and only the rows showing a data/value have been copied to sheet 3, i then want the same process to start again on sheet 2 - Again only the rows showing data/values to be copied.
I am using Windows 7, with Excel 2010.
I have one Worksheet Short Course - PB's Which contains all swimmer information and searches through all previous swims and reports back the swimmers current Personal best times (PB)
I am creating a work sheet to calculate percentage increases over a set date period. I have managed the calculations but can not get the autofill to function as I was hoping.
In my short course sheet 1 Row = a Swimmer and there details
In my new sheet, I have 3 rows for the same swimmer
Row 1= Swimmer and PB's before a set date
Row 2 = Swimmer and PB's After set date and upto Todays date
Row 3 = Percentage calculation of difference between the two rows to enable track performance increase
I have all of this working and in place and want to copy the formula's down now to cover all swimmers in the club.
When I copy the 3 lines down, Autofill adds 3 to the row reference for the first line and I just want it to add 1.
ROW3) =IF('Short Course - PB''S'!A3="","",'Short Course - PB''S'!A3)
ROW4) =A3
ROW5) = A3
[Code].....
I'm trying to perform a copy & paste operation by hand which to me should be easy in theory. I have a worksheet whose formulas have been corrupted. I have a backup of this sheet- I'd like to copy the backup sheet into the workbook. The problem is that the formulas, which reference other worksheets within the workbook, are copied over as links to the backup workbook instead of the new workbook they are being copied too. This seems simple, but how do I copy the worksheet and the references without having to go through all of the references by hand to only apply to the local book.
View 4 Replies View RelatedHave you ever copy a row with formula in locked cells & insert it in a protected worksheet?
View 1 Replies View Relateddoes such a formula exist? I regularly Change a formula in cell C1. To Show my working I would like to have The formula from C1 written next to it as an equation.
Example: B1 | C1
=Text"updated from formula in C1 automatically" | =x+y*A2
Summarised, is there a formula to Display the formula written in another cell?
I have used excel to create a set of timesheeets and a total page, on the total page there is a column that will show you any varience on your hours each month (I.e if you have worked overtime or under your hours)
I have used the formula =(worked+hours+sick)-(weekly hours*week in month)
This works fine the only problem is in shows a minus number until the hours for that month have been entered so I cant create a total column, is they any way to get these numbers to show 0 until the times are entered?
I need a formula to show the numbers as they are when they are below 30, but when they go above 30 I need it to display 30 every time. I have attched a file.
View 3 Replies View RelatedI'm trying this code but its not showing the formula in cell Z1, what am i doing wrong here ??
View 2 Replies View RelatedI'm working through a huge file and trying to compact it down and make it more workable. I've already managed to get it down to what i need but i now need to add a few things so others can work it more easily also.
One of the ideas i had was the following, but for the life of me i dont know where to start.
The spreadsheet will be updated on a daily basis and at the end of each week we will need to submit any changes we've made to the marketing team.
However the change tracker thats built into excel isn't really what i want.
What i though was i should set up an IF formula that would return a True value if any data in that row was changed.
Then i could set up a macro to copy those rows only to a new sheet to be sent to the marketing team, this way the structure of the spreadsheet would be kept to make it easier for them.
show a formula as text in another cell
View 5 Replies View RelatedI'm having trouble with the attached example. An earlier member solved the odd-even problem, but I'd only like it to calculate if there is data in columns B to G.
View 7 Replies View Relatedif the cells in column E AND column F are blank, then column G will be blank also (I dont want 0 showing), if not show me the difference between col F and col G.
I put in the following:-
=IF((E2="")AND(F2=""),"",E2-F2)
However, Excel informs me this is wrong and corrected it as
=IF((E2="")*AND(F2=""),"",E2-F2)
I guess my question is why do I need to put in "*" for this to work?
Is there are a formula that will result in showing the users name in a selected cell?
I have attached here an excel sheet with some data. I need to show the minus value in D5 as a plus sign, is there any conditional formula to work this out??
View 4 Replies View RelatedExcel. Let's say this how a column looks like:
a
b
b
c
d
Is there a formula to get this outcome:
a 1
b 2
c 1
d 1
If not, is there a way to create a list of words that are in a column?
