Formula Not Capturing Data When Copied Down
Nov 4, 2006I am trying to copy a formula down a row. All I am getting is the exact same answer from the 1st cell instead of the new data.
View 9 Replies
ADVERTISEMENT
An IF Or SUM Formula- The Rows Showing Data/values To Be Copied
Jan 17, 2007I want cell B4 on sheet 3, to show the value of cell B4 on sheet one ... only if there is a value in B4 on sheet one then i want the rest of row 4 to be copied to sheet 3 also.
HOWEVER if the value in cell B4 sheet 1 is BLANK/EMPTY then i want the full row to be over looked and the next row to be checked (B5 all the way to B30)
Once B4-30 on Sheet 1 has been checked and only the rows showing a data/value have been copied to sheet 3, i then want the same process to start again on sheet 2 - Again only the rows showing data/values to be copied.
Capturing The First Change In A Formula
Feb 16, 2006I have a spreadsheet that monitors the opening time of some stocks. In the
morning before trading starts it looks like this:
StockTIME
QQQQ-O2/15/06
AAPL-O2/15/06
GOOG-O2/15/06
CSCO-O2/15/06
SPY-A2/15/06
When trading starts, the TIME value records the time of the last trade, thus
the first time will represent the time of the first trade - I am trying to
capture this time value. The problem is that if another trade occurs, the
TIME value updates to the time of that last trade. The TIME value is fed by a
DDE link from a data source.
Is there a way to capture the "first" change in the TIME value ?
Capturing Data From Userform To Worksheet?
Aug 30, 2012I have a macro that is starting to get pretty intensive and beyond my knowledge base. Currently is takes the needed data from sheet(1) and copies it to a newly created "Sheet2" in a specific format. Once the macro is done formatting "Sheet2", it shows both userforms for the next part of this macro.
One userform (UserForm1) is for inputting barcode data into rows on "Sheet2" (this is where I am running into problems). I cannot get the userform to capture the captions to the needed cells in "Sheet2".
The other userform (UserForm2) is for a visual representation of the error check. This will check for differences in Sheet2's column data. If a row's data in Sheet2 doesn't duplicate as expected it will flag RED and an image to show in the associated frame in UseForm2.
UserForm1:
Plate ID (PlateIDLabel goes to "PCR Plate ID" header column in Sheet2)
Plate Location (PlateLocationLabel goes to "PCRLocation" header column in Sheet2)
Currently the userform is coded to recognize prefixes for correct input into label textboxes.
Attached it the workbook with macro/userforms.
VB:
Option Explicit
Private Sub CommandButton1_Click()
Sheets.Add.Name = "Sheet2"
ActiveSheet.Move _
[Code]....
Capturing Lowest Value Recorded In Data That Changes?
Jan 3, 2012I run a golf handicapping system that utilises excel quite heavily to record a LOT data over the course of a season. In essence we have in excess of 50 players who play once or twice a week and I record their Stableford scores (dont worry that's a golfing phrase but it is basically how they performed that day) and adjust their golf handicap accordingly - all in XL.
So - a player may start the season with handicap of 20 but over the season this will vary up and down as each score is recorded. A player may well play in excess of 50 rounds in a season.
I currently record the player's starting handicap in one column and in the next column appears the freshly calculated new handicap after a new score has been entered. The column containing the new handicap overwrites the old handicap value each time it is recalculated.
All I want to do is to create a 3rd column that records the lowest handicap value attained during the season. So for each player I guess it should take the newly calculated handicap and decide if it is lowest it has 'seen' in that column and if it is record it.
Capturing Data From Userforms Created At Run Time
Apr 24, 2007I found a useful thread Creating UserForm Controls via Code. how to create dynamically scalable UserForms at run time. I'm now stuck on the obvious Part 2 that isn't included...How does one capture the values in the text fields without knowing the names of those fields. My initial thought is to use a For loop to read the values into an array, like so...
Dim ReadArray (TextFieldCount)
For k = 1 To TextFieldCount
ReadArray(k) = ?????????
Next k
If it were a simple read from a text field I'd use something like:
Set ReadField = TextBox1.Value
Capturing Data: Capture Fleet No & Model From Book 1
Oct 22, 2009find the attached file. Book 2 there is 4 columns ie,reg no,fleet no,product & model and on book 1 there is fleet no,reg no and model and what i need is to capture fleet no & model from Book 1.
View 2 Replies View RelatedData From The Data Sheet Is Copied Over To The Report Sheet With Formula
Apr 11, 2007The data from the Data sheet is copied over to the Report sheet with formula.
Basically, what I need to do is If statement:
-when there is no any data in csv file (so the Data sheet will be empty);
-the range (A7:N1000) to be hidden (on the Report Sheet)
-the Report sheet to be saved
and also...
I would like to ask, how to select from the Data sheet, the rows with Data only. I copy them over with formula instead of macro- but would like to hide all the empty rows on the report.
Option Explicit
Sub Update_Report()
'
' Macro1
Dim extract1 As String
Dim dReport As String
Dim rSheet As String
Dim dSheet As String
extract1 = "LeadSheetAll_0001.csv"
dReport = "Appointments.xls"
rSheet = "Report"
dSheet = "Data1"
Application.ScreenUpdating = False
Application.DisplayAlerts = False
How To Copy Row To Last Row And Paste Copied Rows Directly Below Copied Contents
Oct 20, 2013with a macro. I am looking to copy row 2 to the last row and past the copied rows directly below the copied contents.
View 9 Replies View RelatedShow Copied Formula
Sep 7, 2007I have a problem in copy formulas form one cell to another, my formulas are writen in one workbook in this way... '=Dog+Cat.
The problem is that I did a looking table code (vlookup) and when it shows the formula I have #¿Name?.
I would like to knw if there is a way to fix this using the vlookup or I'll be obligated to use special Copypaste
Relative Formula Copied Across Worksheets
Dec 8, 2008It's been a long time since I have worked with Excell, it use to be the " $ " that made things absolute or relative.
I have this formula:
='1'!C194+C193 on sheet 1 named "1" without the " ". I need to copy it across 31 sheets. I thought that it was the " ! ", without the " ", that makes the address absolute so I took it out and then attemped to copie it to other sheets. The idea was that the formula would then read: ='2'!C194+C193 on sheet 2, and ='3'!C194+C193 on sheet 3 and so on. The formula is in the exact same location on each sheet, C194. But this won't work. I am at this time doing each formula one at a time. I have many workbooks that will use the same style of copy and paste; about 15 workbooks each with 31 sheets.
It would help if someone could explain how to save time. I do know how to use the Ctrl to select different cells and how to use Ctrl+Page UP/Down to change tabs. I just have to get the formula correct.
Formula Change To Allow A List To Be Copied.
Jan 9, 2009I have a formula that basically copies a cell into another workbook if 'other' is entered into the column to the right. i,e cell A1 has 'other' B1 has '100', the figure in B1 is placed into another workbook cell. The results are only shown if a month is selected from a drop down on the 1st workbook with the meta data.
What I want to do is to add a command to the formula below so that it will recognise that after the first item is entered it will look for the next data item and not just repeat the first….
{=IF($L$92:$L$580="","",INDEX($L$92:$L$580,MATCH(1,(TEXT($C$92:$C$580,"mmmm yyyy")=TEXT($E$5,"mmmm yyyy"))*($L$92:$L$580<>""),0)))}
In the attached worksheet is an example of what I want (table 2) and what I'm currently getting (table1)…
Inserting Copied Text Into A Formula Using VBA
Jul 31, 2012I am trying to write a macro that will allow me to copy the text of a cell, and then insert text around that previously copied string. I am having a problem adding the copied text into my formula. Here is my code below:
Sub Bid()
'
Selection.Copy
ActiveCell.Value = "inventory levels are " & ActiveCell.PasteSpecial(xlPasteValues) & " and oversold by"
ActiveCell.Offset(1, 0).Select
End Sub
Formula Down Rows When Copied Across Columns
Aug 24, 2006I am looking for a formula that reads down when drug to the right.
Change Sheet Name In Formula When Copied Down
Jan 2, 2007Suppose I have 100 worksheets in a workbook ( named 1,2 3 ........100) in a collecteve sheet ( I have a coulmn of 100 same formulas refering to the same cell in all the 100 worksheets)
for example :
'1'!$a$1
'2'!$a$1
if I drag the first formula Fill Down With Fill Handle then, the sheet name will be the same all the way down(1) , which is not correct , so I have to go bach and modify them manually , which is very boring and mistakes could easily happen
Copies A Row To A New Sheet And Adds A Formula To That Copied Row
May 25, 2009I have written a macro that copies a row to a new sheet and adds a formula to that copied row.
View 8 Replies View RelatedLink/copy Value/formula To New Copied Worksheet
Jul 3, 2007I have a worksheet. In sheet3 The value of column L2 is the value of column M2 in sheet . Everytime I copy the new sheet, I have to re type the formula for this new sheet. Is there a way to give formual such that when I copy new worksheet the formula will come automatically as it always has to link from the M2 column of the previous sheet?
View 9 Replies View RelatedFormula Returns Incorrect Results When Copied
Aug 4, 2006My goal is to sum up the total sales and total forecasted sales of each cost center. I compiled a formula that is supposed to do this just as I want it to. Simple enough. However, for some odd reason the formula returns either the totals of ALL cost centers or just a zero instead of the correct result. The weird part is that when I check the formula by pressing the "insert formula" button it suggests that the formula actually should produce the desired result.
View 5 Replies View RelatedFormula To Reference Different Worksheets When Copied/Dragged
Sep 21, 2006My worksheet "Ledger" has a column of 1-31 days, with row headings of MC/Visa, Amex, Disc & Cash. I also have sheets "1-31" within the same workbook that contain the data I need under each heading. I can get the data for "Amex" in sheet "1" to appear in the first cell underneath "Amex" in the sheet "ledger" by typing the formula ='1'!$B$29.....
View 6 Replies View RelatedCopied Formula Show In Cell Not Results
Oct 24, 2006I have copy 65'000 formula text cells from a software and paste it to excel. But, the formula in cell is not activated. In order to activate the cell formula, I have to click on each individu cell and press enter to active it. But i got
65'000 rows of the similar cells. So, what is the quick way to all the text formula at the same time.
Fix Cell In Formula So It Wont Change When Copied
Dec 3, 2007I need to create forumulas for fed,state,medicare,and fica taxes. It has to be an absolute forumula where i use percents. One would be i have my gross pay in column e5, my fed taxes which is 18% in f5, but the 18% is above that in F4.
View 3 Replies View RelatedCopy Data From A List Then Paste Into Another Workbook And Save As One Of Data Copied
Jun 15, 2014I am trying to create a macro to copy a set of datas in a row , paste into another workbook (specific sheet),then save it as one of the datas that was copied over.
Workbook1
Ticket#
Description
Name
12345
Test 1
David
32145
Test 2
Steve
Workbook2 - sheet (ABC)
Copy row 2 from Workbook1, paste to row 1 in Workbook2 sheet(ABC)12345
Test 1
David
Saveas Workbook2 - ABC - "12345" - Ticket #
Copy row 3 from Workbook1, paste to row 1 in Workbook2 sheet(ABC)
And so on. I will have a set of data to trasfer to Workbook2, each row different workbook.
Getting Indirect Formula To Update Cells References When Copied?
Mar 18, 2014As you would normally use indirect formulas so the cell references don't change. Which that is what I want in the end, but I need to copy them to an indefinite number of cells first and would like to not do it by hand. I have found some solutions to similar questions/problems but cannot figure out how to make them work for me. So, what I am looking to do is this... (I have also attached the spreadsheet for reference)
I have gotten the information in columns A through F on the first sheet to update as rows are added, moved, deleted on the second sheet using Indirect range. Also, I could do this for Column I (Copmleted Proj. Avg. Terminations) but I would have to do it manually (as I began doing in I3, I4 & I5) but that would be time consuming. So I am hoping there is a way I can copy the formula down the cells are updated for the initial copy but then don't update if the referenced cells are moved or deleted.
Nested IF (data To Be Copied From Jan To Dec )
Aug 2, 2009find the attached sheet. I want advice for the VBA Code I used in this sheet. I am simply using nested if. advice me any other solution for the same as I want data to be copied from Jan to Dec ? I am beginer in VBA coding.
View 3 Replies View RelatedKeep Formatting Of Copied Data
Mar 2, 2007I'm attempting to copy some data from one spreadsheet to to a workbook in another spreadsheet. However, when I do my copy, I lose all of the formating of the intial data. Does anyone know if there a way that I can keep the the format of the original to the new spreadsheet?
View 5 Replies View RelatedExcel 2010 :: Copying 3 Rows Of Formula And Using Autofill To Only Add 1 Each Time When Copied Down?
Sep 2, 2013I am using Windows 7, with Excel 2010.
I have one Worksheet Short Course - PB's Which contains all swimmer information and searches through all previous swims and reports back the swimmers current Personal best times (PB)
I am creating a work sheet to calculate percentage increases over a set date period. I have managed the calculations but can not get the autofill to function as I was hoping.
In my short course sheet 1 Row = a Swimmer and there details
In my new sheet, I have 3 rows for the same swimmer
Row 1= Swimmer and PB's before a set date
Row 2 = Swimmer and PB's After set date and upto Todays date
Row 3 = Percentage calculation of difference between the two rows to enable track performance increase
I have all of this working and in place and want to copy the formula's down now to cover all swimmers in the club.
When I copy the 3 lines down, Autofill adds 3 to the row reference for the first line and I just want it to add 1.
ROW3) =IF('Short Course - PB''S'!A3="","",'Short Course - PB''S'!A3)
ROW4) =A3
ROW5) = A3
[Code].....
Formula Copy & Paste: Reference Other Worksheets Within The Workbook, Are Copied Over As Links
Apr 28, 2007I'm trying to perform a copy & paste operation by hand which to me should be easy in theory. I have a worksheet whose formulas have been corrupted. I have a backup of this sheet- I'd like to copy the backup sheet into the workbook. The problem is that the formulas, which reference other worksheets within the workbook, are copied over as links to the backup workbook instead of the new workbook they are being copied too. This seems simple, but how do I copy the worksheet and the references without having to go through all of the references by hand to only apply to the local book.
View 4 Replies View RelatedFinding If The Copied Data Is A Duplicate?
Feb 4, 2014I use this code below to copy information from various sheets on to one sheet,
PHP Code:Â
Private Sub CommandButton1_Click()
Application.ScreenUpdating = False
Dim copySheet As Worksheet
Dim pasteSheet As Worksheet
Dim xrow As Integer, xcol As Integer
[code]....
i use a command button to run the macro, but i would like something added that if someone else pressed the button and ran it again that it would check to see if it had duplicated the previous line and if it did it would delete it leaving just the one record for that week.
Auto Filter With Copied Data
Feb 25, 2014I am trying to write a macro that will:
A: copy data in cell A1 from Sheet1
B: Add an auto filter in sheet2 column A = to what was copied in Cell A1 from sheet 1.
Dde Data Copied From Sheet1 To Sheet2
Aug 28, 2009I am enlcosing a file that I partially acquired (the macro portion) and I am trying to add to that.
The workbook has a dde link in sheet 1, the macro will write the data to sheet2 at set times. I am creating a report of the data in sheet 2 in sheet3. at this point it is very rudimentary. I need some assistance to clean up the macro and the post of the dat in sheet2. I have created a detailed (probably over detailed) explanantion in sheet 1 in a text box.