Excel 2010 :: Copying 3 Rows Of Formula And Using Autofill To Only Add 1 Each Time When Copied Down?
Sep 2, 2013
I am using Windows 7, with Excel 2010.
I have one Worksheet Short Course - PB's Which contains all swimmer information and searches through all previous swims and reports back the swimmers current Personal best times (PB)
I am creating a work sheet to calculate percentage increases over a set date period. I have managed the calculations but can not get the autofill to function as I was hoping.
In my short course sheet 1 Row = a Swimmer and there details
In my new sheet, I have 3 rows for the same swimmer
Row 1= Swimmer and PB's before a set date
Row 2 = Swimmer and PB's After set date and upto Todays date
Row 3 = Percentage calculation of difference between the two rows to enable track performance increase
I have all of this working and in place and want to copy the formula's down now to cover all swimmers in the club.
When I copy the 3 lines down, Autofill adds 3 to the row reference for the first line and I just want it to add 1.
ROW3) =IF('Short Course - PB''S'!A3="","",'Short Course - PB''S'!A3)
ROW4) =A3
ROW5) = A3
[Code].....
View 4 Replies
ADVERTISEMENT
Mar 27, 2012
I need something that will take data from columns in one Spreadsheet and put in difference cells in a row. I know this could be done with recording a macro but the number of column will never be constant.
Below I attached examples of the Spreadsheet
Financials SpreadSheet
Need to have the data in column B to F put their respective cells in row in the
Master Spreadsheet
So we would have 5 rows.
Excel 2010ABCDEFGH5Job Number17542000250030003500Total6Date Booked01-Mar-1215-Mar-1215-Mar-1223-Mar-1223-Mar-127SalespersonJames ThorntonHoward StandenHoward StandenIan BullimoreSylvia Walton8AdvertiserNestleTalkTalkLloyds BankSkodaHonda9ProductNature ValleyBroadbandMortgageApril
[Code]....
View 6 Replies
View Related
Jul 18, 2013
We keep spreadsheets that have several columns of data, one being "comments" which contains quite a bit of text. I needed to copy some rows off the one workbook into another. Everything copied fine except it cut off part of the comments when I pasted to the new workbook.
View 2 Replies
View Related
Mar 15, 2013
I am trying to insert a blank row into a table (created using the table function in Excel 2010) without the copying the formulas. Every time I insert a row the the formula is copied.
View 3 Replies
View Related
Jan 23, 2013
Excel 2010
I have this code in a macro, the range will change as more data is added. so that I dont have to keep changing the range. How can I have this code autofill from the activecell to the last cell that has data in column M.
Selection.AutoFill Destination:=ActiveCell.Range("A1:A50000")
ActiveCell.Range("A1:A50000").Select
View 7 Replies
View Related
Feb 19, 2014
I have been struggling to find where my code is throwing up an error 1004 on the last line of the below code. I have a number of tables which will update automatically from Pivot tables on another sheet.
So the first part of the code is adding in the new column and then I want to autofill the date into the headers of the column which I thought the below would do, but I just don't understand why I keep getting the error. My data is dynamic as it will grow month by month which is why I am using R1C1 referencing.
Sheets("PNN Table").Cells(9, 16384).Select
ActiveCell.End(xlToLeft).Select
ActiveCell.Offset(0, -2).Select
Selection.AutoFill Destination:=Range(Selection, Selection.Offset(0, 1))
View 3 Replies
View Related
Mar 7, 2014
I'm using Excel 2010 and I wrote the code below to autofill a range that feeds a chart on the worksheet "Dashboard." Essentially, the user selects criteria on the Dashboard and clicks the "Submit" button, which causes an advanced filter to copy the data that matches the criteria into the range Sheets("HiddenSheet").Range("A2:H"). I need the code below to autofill the formulas in I3:Q3 in I:Q until the last row in A:H, but I keep getting a "Type Mismatch" error on the bolded line below.
One note - Columns K:Q contain formulas that feed off of Column C and into Column J - that's why the autofill range is different than the chart SetSourceData range.
Sub TimelineControl()
Dim Timeline As Chart
Dim ws As Worksheet
Dim rngforTimeline As Range
Dim LastAxis As Integer
Dim LastA As Long
[code].....
View 3 Replies
View Related
Aug 28, 2012
I work with a team of users that are continually publishing reports in Word that contain charts and graphs copy and pasted from Excel into Word 2010.
We have a custom script that leverages a PDF engine to automatically convert .doc files to .PDF files that we distribute electronically to our clients. This all works great, but only if all my users select 'paste special' and Enhanced Metafile Format when adding their excel charts into our reports. Most of these people aren't tech savvy, and I'm havin ga hell of a time getting them to follow this workflow and am hoping there's a way in Office 2010 to select the default paste from excel into word when the content is a chart.
It seems like the default paste from excel is an embedded chart/graph that you can then further manipulate each component of the chart in Word; the default doesnt' paste an actual image. I am assuming the pdf renderer is using a lower resolution .PNG version of the image and when these are scaled for print and or pdf, they look like crap.
Is htere anyway I can automatically change the default paste format for the chart from excel into word to be an EMF/EMV (enhanced metafile?) Either thorugh the registry or some other saveable setting?
View 1 Replies
View Related
Jan 23, 2014
In earlier versions if I used the double clicked the autofill handle it would only fill down to the next adjacent cell containing data. Now it fills down to the bottom of all the data regardless of whether there is a blank cell or not e.g
X X X Z
X X X Z
X X X Z
X X
X X X
Now this happens
X X X Z
X X X Z
X X X Z
X X ...Z
X X X Z
How can I stop this as I need to enter different data in the next section?
View 1 Replies
View Related
Jun 27, 2014
I am working with a very large spreadsheet 10k references... I need to add sequential numbers in a column to identify the references but I need to use he filter in the author column due to the way my referencing software exports the data...
When I try to use the pull down autofill it just keeps repeating the last or second last number of the cell - the autofil box that usually appears has disappeared.
Im using excel 2010
View 2 Replies
View Related
Oct 20, 2013
with a macro. I am looking to copy row 2 to the last row and past the copied rows directly below the copied contents.
View 9 Replies
View Related
Aug 24, 2006
I am looking for a formula that reads down when drug to the right.
View 9 Replies
View Related
Jul 31, 2014
The macro I'm writing (Excel 2010) is a loop that inserts a column based on a variable location, enters in a formula in the first cell, enters another formula in cell 2, then should fill that second formula to the last row, then keep going until the loop ends. There is always a chance that there will be blank cells to the left and right so I didn't use xldown. I've tried writing in multiple ways, but I keep getting the error.
Code:
Sub colfrmadd()
Range("A1").CurrentRegion.Select
colcnt2 = Selection.Columns.Count
[Code]....
View 1 Replies
View Related
Jan 17, 2007
I want cell B4 on sheet 3, to show the value of cell B4 on sheet one ... only if there is a value in B4 on sheet one then i want the rest of row 4 to be copied to sheet 3 also.
HOWEVER if the value in cell B4 sheet 1 is BLANK/EMPTY then i want the full row to be over looked and the next row to be checked (B5 all the way to B30)
Once B4-30 on Sheet 1 has been checked and only the rows showing a data/value have been copied to sheet 3, i then want the same process to start again on sheet 2 - Again only the rows showing data/values to be copied.
View 9 Replies
View Related
Mar 8, 2013
I'm trying to autofill "vertically" in a spreadsheet using a formula which loads value from a different sheet.
Lets say I have cell (A1 for example) ='2013'!A39
Now I want to fill A2-A30 in a way that the formula updates to ='2013'!B39, ='2013'!C39, ='2013'!D39...and so on
I've tried using ='2013'!A$39, but this only copies the formula as it is. When I try to autofill cell A2-A30, the formula still is ='2013!A$39
Is this possible to do?
View 1 Replies
View Related
May 3, 2013
I am looking for a macros VBA where a user insert or update a data the date and time should be insert in column I and save the workbook.
Note: If the column I already have the date and time inserted before then it should give message record already have date and time.
I am using office 2010.
View 9 Replies
View Related
Aug 27, 2012
I have problems copying data (from notepad, values are in scientific notation) into Excel 2010 worksheet. This problem only occurs with one of my laptops. I also tried this on my partner's laptop and no problem at all.
My new laptop (which I would like to use in the lab) has Windows 7 professional installed on it. I bought my laptop in Austria/Germany, so I changed the language from German to English. I then installed Microsoft Office 2010 on my laptop (which I am also using on my main laptop- without any issues). I have changed my default language to English UK.
The issue is as follows: Here is a small sample of the data from notepad
3.33343e-03 1.51357e-03 0.00000e+00 0.00000e+00 4.96507e-01 3.84643e-03 6.24332e+00 1.81305e+03
I select & copy the data from the notepad (also tried notepad++) and paste it into the Excel 2010 worksheet. This is what I get in Excel:
3.33E+02 1.51E+02 0.00E+00 0.00E+00 4.97E+04 3.85E+02 6.24E+05 1.81E+08
When I use another spreadsheet package (MagicPlot Student version), there are no problems. I have also installed Notepad++ and experience the same issue. So somehow Excel is increasing the value by 5 orders of magnitude. When I copy the values from another Excel sheet into a new Excel sheet, there are no problems. I have re-installed the Microsoft Office suite several times and the problem is still there. I can't re-install Windows 7 as I don't have the installation discs.
View 1 Replies
View Related
Mar 19, 2014
MS Office Professional Plus 2010
Excel 2010, 32bit
When making a copy of a sheet within the same workbook, I receive several messages "A formula or sheet you want to move or copy contains the name . . ."
How do I identify and remove these names?
How do I prevent new ones from being generated in the future?
View 4 Replies
View Related
May 21, 2014
I used the button in Excel 2010 to record a macro that allows me to format a workbook font and stuff because i do that many times a day for several workbooks. However I want to be able to just push a button and have all open workbooks run the macro I recorded.
I am able to make a button- thats easy, but how do I get it to run for ANY workbook? My problem is that apparently it only runs the workbook that is named a certain way. should i post the code here?
View 1 Replies
View Related
Jul 3, 2009
I have an xls with over 500 rows of data, every day I have to update the contents of some of the cells, Cell A contains the date and is auto filled already to the end of 2009, Cell B shows me the number of days since I began the sheet and is also auto filled already to the end of 2009, Cell C & Cell D I have to manually enter data
Cell E contains this formula =D527-D526
Cell F =C527/B526
Cell G = =IF(C527=0,0,C527-C526)
Cell H resorts to manual entry.
My question is "why do these columns with formulas, (E,F & G) not automatically carry the formula to the next row?" I'm sure that they once did. Is it a setting that I can't find?
This is excel 2007.
View 6 Replies
View Related
Dec 26, 2011
I have extracted a lot of data (from a webpage), onto Sheet 1 of my Excel 2010. The results I have obtained of this data I have extracted might occupy cells A1 to F1.
I want to keep doing this over and over, copying and pasting data from a webpage onto Sheet 1, then obtaining various results and adding those results under cells A1 to F1, which would of course be A2 to F2.
Is there any way these results can be transferred to say Sheet2, but of course occupying a new line each time so that at the end of the day, I have a list of results.
Of course I could just copy and paste them to say Sheet2, under each other, just wondering if there was some tricky way.
View 3 Replies
View Related
Dec 9, 2013
I am trying to auto fill this formula down a column but it doesn't keep the C4,D4,E4...ETC to stay constant
I manually did these two correct ones
=SUM(C5*C4+D5*D4+E5*E4+F5*F4+G5*G4+H5*H4+I5*I4+J5*J4+K5*K4+L5*L4+M5*M4+N5*N4
+O5*O4+P5*P4+Q5*Q4+R5*R4+S5*S4+T5*T4+U5*U4+V5*V4+W5*W4+X5*X4+Y5*Y4+Z5*Z4+AA5*AA4)
=SUM(C6*C4+D6*D4+E6*E4+F6*F4+G6*G4+H6*H4+I6*I4+J6*J4+K6*K4+L6*L4+M6*M4+N6*N4
+O6*O4+P6*P4+Q6*Q4+R6*R4+S6*S4+T6*T4+U6*U4+V6*V4+W6*W4+X6*X4+Y6*Y4+Z6*Z4+AA6*AA4)
when I drag it down it incorrectly looks like this:
=SUM(C7*C6+D7*D6+E7*E6+F7*F6+G7*G6+H7*H6+I7*I6+J7*J6+K7*K6+L7*L6+M7*M6+N7*N6
+O7*O6+P7*P6+Q7*Q6+R7*R6+S7*S6+T7*T6+U7*U6+V7*V6+W7*W6+X7*X6+Y7*Y6+Z7*Z6+AA7*AA6)
I want C6,D6,E6 to be C4,D4,E4 ETC
View 3 Replies
View Related
Dec 1, 2011
I have two workbooks I am using. Essentially I am copying values out of one workbook, opening a second workbook, manipulating data and pasting it. Everything is working great but one issue! The first workbook has named ranges in it that I don't want in the second workbook (just values). I don't want them because when I try this operation the second time it asks if I want to use the same name or choose a different name. For some reason it is still copying over all the named ranges (all 343 of them!). Is there a way to not allow it to do that or simply just delete the names before I close the second workbook?
Win 7 64, Office 2010
Sub CopytoDB()
Application.ScreenUpdating = False
Worksheets("Setup").Select
Range("A2:A766").Select
Selection.Copy
Workbooks.Open Filename:="D:Server MirrorDatabaseSetup Database.xlsm"
Worksheets("Database").Select
Columns("E:E").Select
Selection.Insert Shift:=xlToRight, CopyOrigin:=xlFormatFromLeftOrAbove
[code].....
View 1 Replies
View Related
May 2, 2012
I have a workbook containing two worksheets of staff training records.
The first work sheet contains a list of names and the dates they completed various training courses. I have used some simple date based formulas and conditional formatting to colour-code their name depending on whether their earliest retraining due date has passed, is coming up in the next few weeks, or is a long way off. The data is set out alphabetically, one person per row of data.
The second sheet contains the same list of names, but each person's data is split across two consecutive rows. The cells in column A which contain the staff names are merged in pairs so that the name heads both rows of data.
I want the colour coding of the merged name cells in sheet 2 to automatically copy the colour coding applied to the single name cell in sheet 1, but don't know how.
I'm using excel 2010.
View 3 Replies
View Related
Oct 30, 2013
I am using a Pivot Table to search for keywords in a subject line and it will display results if that keyword appears in the Pivot Table.
What I want to be able to do is copy 30 cells of that Pivot Table at a time into a new Workbook. All that I want to copy is Column A(Case Number) and Column B(Subject Line) of the Pivot Table.
Example:
Total Pivot Table data is 1000
I search for "Crashing", this will display 100 records
I want to grab the first 30 records and copy them into a new workbook
I want to grab the next 30 records and copy them into a new workbook
I want to grab the next 30 records and copy them into a new workbook
I want to grab the remaining 10 records and copy them into a new workbook
View 9 Replies
View Related
Jan 10, 2009
Here is my table which is just a test sample of the larger table, but in the end, it is column 1 I want to base the new ws on.
Before Macro
AY *AB1UnitCount2533210431 LGR SQ10584631 LGR SQ7726 Excel tables to the web >> Excel Jeanie HTML 4
The code below works fine through the first instance of the match and adds a new ws based on the name, but when it gets to the second match the macro tries to add the ws all over again and I get a run time error 1004 which states you can not add a ws and name it the same as one that already exist. I only have one sheet in my wb titled "AY". How can I also have the two column headers transfer to the new ws?
Public Sub CopyUnit()
Dim N As String
Dim i As Long
Dim ws As Worksheet
Set ws = Sheets("AY")
N = Worksheets("PAS Codes").Range("L14").Value
For i = Range("A65334").End(xlUp).Row To 1 Step -1
With ws
If Cells(i, 1).Value = N Then
.Rows(i).Copy
Sheets.Add.Name = N
Rows("1:1").Select
ActiveSheet.Paste
End If
End With
Next i
Application.CutCopyMode = False
End Sub
After Macro
31 LGR SQ *AB1UnitCount231 LGR SQ7331 LGR SQ10 Excel tables to the web >> Excel Jeanie HTML 4
View 9 Replies
View Related
Apr 2, 2014
Im trying to copy multiple workbooks and just save it into only one worksheet. I have 2000 diffrent workbooks with the diffrent amount of rows, The ammount of cells is the same and it dosent change.
im working on a excel 2010
This is what i got for the moment..
Sub LoopThroughDirectory()
Dim MyFile As String[code].....
View 1 Replies
View Related
Sep 25, 2012
How do I delete filtered rows without deleting the hidden rows in excel 2010?
View 8 Replies
View Related
Jun 16, 2014
calculate the number of full rows in one data base located on one sheet X to determine how many rows the macro needs to extend on sheet B (sheet B is made only of formulas for data interpretation in sheet A.
View 14 Replies
View Related
Jan 9, 2014
I have imports with several values listed as :00. I am unable to adjust the import or export to make these values 0:00 as they should for calculating. How can I convert the :00 values to 0:00? Its literally just like I need to add a 0 zero in front of the colon ":". This is the case with anything imported that is less than 1:00 minute. I have :55 that should be 0:55 and so on. I have tried re-formatting for different time values, tried various formulas that were listed in the forums.
View 4 Replies
View Related
