Private Sub CommandButton1_Click()
Call ShockwaveFlash1.SetVariable("testVar", "Message B")
'This sets the _ value of the variable in the Flash Project.
End Sub
Private Sub ShockwaveFlash1_FSCommand(ByVal command As String, ByVal args As String)
Text1.Text = args
'this catches the action sent by Flash, and uses it in the TextBox.
End Sub
Private Sub UserForm_Activate()
Call ShockwaveFlash1.LoadMovie(0, CurDir + "/vbSample.swf")
'This loads the movie that was made into level 0 of the project.
End Sub
(I got from this link http://www.kirupa.com/developer/mx/flashvb.htm) As you can see I have adapted it to work in Excel 2007. Now - when i first run it - the flash file loads and shows in the userform. The only nag being that the .swf file doesnt pass the text into the textbox on the userform. But once i exit the Excel workbook and reload it - the .swf file doesnt show up at all no matter what i do.
On sheet4 is a list of dates and I named that range as UPDATES2013. Each cell in that range is a hyperlink. Sheet1 cell I3 is a data validation list with the named range UPDATES2013 as the list. When a selection from Cell I3 is made I can get it to follow they hyperlink with the code I have. The problem I am having is if there is no file found, then I would like my Userform1 to show. I have tried several different things with the code, but every time I think Im going to get it to work....it doesn't. It either wont show the Userform at all, or it shows it even if the file is found. I am currently putting the code to run the macro on the worksheet module using the worksheet_change event.
One last thing...I also have hyperlinks throughout Sheet1 that will lead to the same files as in the named range UPDATES2013 from sheet4. I need the same thing to happen if they click one of these hyperlinks instead of using the data validation list in Cell I3. Is there a way to make one code that will show Useform1 if a hyperlink is selected and the file cannot be located (whether it be by the individual cells on sheet1...or the data validation list in Cell I3)?Here is the code I am using right now.
VB: Private Sub Worksheet_Change(ByVal Target As Range) DoFollow2013 ActiveCell End Sub [code]....
I have an excel 2003 template containing a userform that is displayed using the workbook_open event.
The userform causes excel to crash with file/path error 75. i have tried many suggestions given on ozgrid and several other forums with no joy.
When the userform crashes, the debugger stops on DataFormNew.show.
I have added stop commands in the initialise procedure to see what is going on and it appears that my userform has disappeared!
to upload the excel template and any other information required to get this sorted. its size is 765 KB which exceeds the size limit to attach to the post.
here is the workbook_open macro:
Private Sub Workbook_Open() 'On Error GoTo MyError 'Call UnProtectAll
'Dim frm As UserForm 'For Each frm In UserForms ' Unload frm 'Next
I have a range named "start" and I have a form named "fMenu". I have used this same code in other spreadsheets to have the userform automatically become visible when the spreadsheet is opened and it works in other workbooks. Apparently I have been struck with the stupid stick this morning. I have a hotkey of "M" and when I use control M the form shows up and the macros invoked by each button on the form are working properly.
Sub open_menu() Application.Goto "start" fMain.Show End Sub
Private Sub UserForm_QueryClose(Cancel As Integer, CloseMode As Integer) If CloseMode = vbFormControlMenu Then Application.ScreenUpdating = True Unload Me RestrictedOptions.Show Else Cancel = True End If End Sub
Trying to use above code to unload active userform and show new userform when red X (close) selected by operator. With the code as is, the Unload Me leaves the form on the screen and displays the RestrictedOptions form. If i remove the Restrictedoptions.Show, the Unload Me does remove the original form.
having trouble with the details of actually making these features work for me. I figured out how to create a UserForm with a ListBox and 2 buttons, but I don't know how to proceed from here.
1. Populate the ListBox in the UserForm with a list of names from the sheet "Totals_Dropdowns", cells K2:K11
2. Make the UserForm pop up and enter the user's selection into cell C40 of the "Regenerate Request"
I know these are very basic operations, and I'm pretty sure I can figure out the rest of my problems once I can get past the above.
I have a userform button that when clicked loads another userform. I am getting a Runtime Error 13: Type mismatch on the line in bold in the code below
Private Sub cmdAdd_Click() Me.txtAdd.Value = Me.VarNo.Value VariationsForm.Show Unload Me End Sub
I do not get an error on the "Edit" button code which is similar so why is the above not working.
Private Sub CmdEdit_Click() Me.txtEdit.Value = Me.VarNo.Value VariationsForm.Show Unload Me End Sub
I'm trying to show a form from inside another form. Example: form1 has a command button and when clicked, I want it to show form2. But I always get a run-time error '32': type mismatch.
when I am trying to open them. they are not opening. When opening excel with flash game, there is big black square box. When opening power point with flash game, it is giving error "Some controls on this presentation can't be activated. They might mot be registered on this computer"
Flash objects on by browser when surfing site are working perfectly fine. i have also re-installed fresh flash from adobe site, but no success.
I have a an excel workbook that is distributed on a flash drive. Currently a Save As Macro copies "A1" as the file name and then opens a screen to allows the user to save that filename to a location that the user selects. What I would like to have happen is for a command button to start a macro that would automatically save the file back to the flash drive that the master workbook is located.
I created a macro, assigned to a menu button, that selects and prints a range on the active sheet. I created the macro with the recorder, then edited it to eliminate the excess. When I run the macro, though, it takes up to ten seconds to print the page and the screen flashes repeatedly while it's running. I also noticed that the length of the delay and the number of flashes seems to be related to the number of lines of code, because the delay was much longer and the flashing more excessive before editing.
Sub PrintContrReview_Click() ActiveSheet.PageSetup.PrintArea = "$Y$5:$Z$20" With ActiveSheet.PageSetup .LeftHeader = "&F" .RightHeader = "&A &D" .LeftMargin = Application.InchesToPoints(1.25) .Zoom = 95
End With ActiveWindow.SelectedSheets.PrintOut Copies:=1 End Sub
So what is the cause of the flash and the delay, and how do I eliminate them?
I have a command button that I want to appear to be flashing (by continually changing the button's font colour text) which a user can click at any time. I can (almost) do this now by using 'Application.Wait Now + TimeValue', but this doesn't allow the user to click the button until the code has finished running.
I would like the VBA code and use instruction, which will make any cell flash in a predetermined range of cells when certain conditions are met i.e. if cell value greater than 10 or less than 100 - usual condition formatting rules.
I have worksheet with cell A1 always change simultaneously (input from other source), in cell A2 I put formula, so value in A2 always change depending value in cell A1. The problem is I want to show that value A2 in userform VBA. I tray using textbox (in property textbox control source I set to A2) but not working because Cell A2 change from formula to static value.
I have a userform that is working perfectly, but when I try to make it an add-in I can't even get it to load. When loading the userform as an add-in I get the error "Run error nr. '9'.: The Index is out of the interval" (freely translated from Swedish to English). The code I'm using to load the userform is
I have a userform with multiple tabs. I have buttons on the excel sheet that correspond with the tabs. How do I get the buttons to open up their respective tabs in the userform?
For example: Button 1 opens Userform-Tab1; Button 2 opens Userform-Tab2; Button 3 opens Userform-Tab3; etc.
Right now they all open the userform, but open the first tab.
I have created a user form where I have two Dates fields. Date Leave (three comboxes, CmbDay, CmbMonth and CmbYear) and then I have written the following code
Private Sub Label4_Click() If CmbDay.ListIndex -1 And CmbMonth.ListIndex -1 And CmbYear.ListIndex -1 Then If IsDate(CmbDay & " " & CmbMonth & " " & CmbYear) Then MsgBox "You selected " & Format(CmbDay & " " & CmbMonth & " " & CmbYear, "dd/mm/yyyy"), , "Date selected"
[Code]....
I have got the code from there.
But I want the show the same date field in another field as Date Join. I have changed the names of Combo Boxes but it is not working.
I want to show the same combo boxes in another field. How do I do that?
I want to temporarily display a userform (maybe for 4seconds) when my spreadsheet loads.
I cannot grasp the ontime function, and from what I can tell most messages posted on here relate to using it for intervals, or to be used at a set time in the day. (I have looked at the Helpsheet for the Ontime function, but struggle to apply what is being said to my situation)
I bet you're getting sick of the "X" questions, and I have done an exhaustive search but the search filter kills searching for (X) or 'X' or "X" .. but nothing I did find is what I am looking to do. I have any # of userforms that when you click the "X" in the top right side, it will hide the userform... once.. Is there a fix to the code below to make it do it every time its clicked?
Private Sub UserForm_QueryClose(Cancel As Integer, CloseMode As Integer) If CloseMode <> 1 Then Cancel = 1 UserForm15.Hide UserForm11.Show If CloseMode = 1 Then Cancel = 1 UserForm15.Hide UserForm11.Show End Sub
Like I said, I don't want to disable it, I tried that off of one of the posts I found and thats just plain annoying, I just want it to hide the one userform and show the other. This will do it once and then you can click it all you want and it wont do anything.. see the annoying trait above.. this lasts until you exit the program.. so the X button can be hit repeatedly though out the day. The userform 15 is visible, userform 11 isn't shown, IE not behind userform 15.
Can the userform be coded so that it loads somewhere other than where it appears. I know that the user can move it after it loads but it would look better moved on its own prior to it being used. I have coded ThisWorkbook which loads on a double click:
Private Sub Workbook_SheetBeforeDoubleClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean) UserForm1.Show End Sub
I need the userform to display over to the right and up a bit
