I'm trying to display a graph I've created in a worksheet, in a userform. But it won't work ..
Private Sub UserForm_Initialize()
Sheets("graphraw1").Select
image1 = ActiveChart.ChartArea.Select
End Sub
How can I add missing values to the axis in a pivot chart line chart? I have a numerical X-axis with values such as 0,1,5,8,14, etc. I have another set of Y values that correspond to the X values. If this was an XY-scatter plot I'd be able to plot X vs. Y and connect the dots for "gaps" in the X values. Since it's a pivot chart I cannot use an XY-scatter plot, I can only use a line chart. The line chart doesn't give me the ability to add the "missing" values, so it gives the impression that my data is more closely packed than it is. The data source is external to my spreadsheet, so I cannot add the values before creating the pivot table/chart.
View 1 Replies View Related I have created a pie chart showing top 10 best selling categories. However, on this pie chart, I want %age of overall sales to be shown.
At the moment say I put in the following
Catalogue 1 100
Catalogue 2 98
Catalogue 3 92
Catalogue 4 85
Catalogue 5 84
Catalogue 6 75
[Code]....
I add Data Labels and select the percentages. This shows at Cat 1 having 12.5% of the sales (100 of 800 sales), Cat 2 having 12.25%, and so on..... However, what you don't see is the following data:
Catalogue 11 60
Catalogue 12 58
Catalogue 13 57
Catalogue 14 57
Catalogue 15 56
So based on 1,088 sales, Cat 1 at 100 is actually only 9.19% of TOTAL sales.
I understand what is happening, the chart is giving the percentage based on the data inputted into the chart.
I did consider adding an 11th category to the chart, which was the total of Catalogues 11-15. Whilst this does give a more accurate percentage figure (as now all sales have been inputted), it makes the chart look ****
Is there a way of either adding the 11th category, and then "hiding" it, so that the chart doesn't display it, but uses it's value to calculate Catalogues 1-10s percentage?
BTW: The reason I ask is that I could be dealing with anywhere from 30 to over 100 catalogues. So it's not ideal showing the others in 1 chart.
Private Sub UserForm_QueryClose(Cancel As Integer, CloseMode As Integer)
If CloseMode = vbFormControlMenu Then
Application.ScreenUpdating = True
Unload Me
RestrictedOptions.Show
Else
Cancel = True
End If
End Sub
Trying to use above code to unload active userform and show new userform when red X (close) selected by operator. With the code as is, the Unload Me leaves the form on the screen and displays the RestrictedOptions form. If i remove the Restrictedoptions.Show, the Unload Me does remove the original form.
how do i show a userform in Excel in the spreadsheet environment? I used to "run macro" but unable to run userform code "private sub".
View 2 Replies View Relatedhaving trouble with the details of actually making these features work for me. I figured out how to create a UserForm with a ListBox and 2 buttons, but I don't know how to proceed from here.
1. Populate the ListBox in the UserForm with a list of names from the sheet "Totals_Dropdowns", cells K2:K11
2. Make the UserForm pop up and enter the user's selection into cell C40 of the "Regenerate Request"
I know these are very basic operations, and I'm pretty sure I can figure out the rest of my problems once I can get past the above.
I have a userform button that when clicked loads another userform.
I am getting a Runtime Error 13: Type mismatch on the line in bold in the code below
Private Sub cmdAdd_Click()
Me.txtAdd.Value = Me.VarNo.Value
VariationsForm.Show
Unload Me
End Sub
I do not get an error on the "Edit" button code which is similar so why is the above not working.
Private Sub CmdEdit_Click()
Me.txtEdit.Value = Me.VarNo.Value
VariationsForm.Show
Unload Me
End Sub
I want to use the following to launch a userform I created.
Sub showuserform()
Dim ans As Boolean
ans = msgbox("do you want to show the userform?", vbYesno)
If ans = vbYes Then
userform.show
End If
End Sub
The trouble is that if I click yes, nothing happens.
Is it possible to show a table on a chart?
ie. Display a Range of Cells right on the chart?
I am trying to add the date my charts were created. I have the date the charts were created in a cell then I added a text box to each chart referencing the cell with the date. On some of the charts the date is showing. But on other charts on same sheet, the date only shows when selecting the chart area of the chart but disappears when selecting other charts or cells on the same sheet.
View 6 Replies View RelatedI'm creating an Excel chart, and I have some data that goes from 0-100. I want to show all of the data, but I'd like to have a different format when it goes above 90.
View 4 Replies View RelatedI have a spreadsheet where users can enter a time using the 24 hour clock - these times are random and can be anything within the 24 hour period.
I want to create a chart or graph that has a timeline of 24 hours, (in multiples of 1 hour starting at 07:00 and going right through to 06:00), and I need the times entered by the users to appear on the chart to give an overview of when these incidents are happening most.
I was thinking that the cluster or scatter chart might work but I can't figure it out. I don't actually need both X and Y Axis, just a timeline - is it possible?
Any way using a macro so that a chart will not show the "0" columns?
View 6 Replies View RelatedI have a pivot table/chart that I need to show the sums as top 20 (or any other number) and All others. How can I do this.
I have an example file here: [URL] ...........
I have a chart with event timestamps (2008-06-09 14:48:15.973) and two event types (A and B) with about 12000 events in total. I want to show a chart (probably line chart) that plots the frequency of events on a time axis (e.g. very many event A last night, not so many today, etc). I figure two time series with A and B independently so user can compare visually. But I dont know how to efficiently convert the events into a counter/frequency of events variable/column.
Ive looked into DSUM, DCOUNT & FREQUENCY functions to make a new column that shows how many events have happened in the previous 10 minutes without success. DCOUNT/DSUM problem: some of the criteria fields are computed by formula (date column minus ten minutes).
I have a chart that feeds from dynamic ranges which contain whole rows of null enteries displayed as #N/A. The charts do not plot these enteries (as it shouldn't) however it does display the category label even if it too is #N/A. Is it possible to remove the category label if all data for that row is null. ie the label is also removed from the chart.
View 2 Replies View RelatedI have a chart with multiple series which I am hoping to show/hide based upon a particular value attached to each series. I was therefore wondering if it was possible to extend the Series object class so that I could have something along the lines of a "Series.specialvalue" property which I could assign and then check to decide whether to show or hide the series?
View 1 Replies View RelatedI have 10 graphs with more than 20 legend entries. However, each graph only needs 3-4 elements out of the 20 legend entries in the graph. Is there any way to force Excel to only show those legend entries that have a value? (without deleting them manually)
View 12 Replies View RelatedAttached is an excel file of my issue. I want to stretch the graph so it shows at least 3-4 months. at the moment is only shows 1 month.
Timeline format - Copy.xlsx
Split from How To Set Up A Spreadsheet The Right Way
Taking onboard what you suggested I have "rethought" the layout and it is now in a single table format. What had stopped me doing this previously was the fact that I was not able to show 7 days a week for 48 weeks in columns. However thanks to the transpose function all the data is now more user friendly (See Attached Workbook)
You mention the data should be quite easy to manipulate from here, any ideas as I am struggling with the concept of how to display the data in a time series. I assume that it will involve some form of lookup function referenced to the table of times, but thats as far as i can get.
Attached is a simple chart and I would like Users to be able to tick a checkbox to show/don't show 'available' series. In the example If the User clicks for Group 1, then only Customer A's data is shown. If Only Checked Group B, then Customer B and C are displayed. If both boxes are checked, then all three Customer's figures will show. (Hopefully depending on what's ticked, the chart's scale would adjust accordingly)
View 3 Replies View RelatedI created 5 charts and instead of having them spread everywhere in the worksheet, I would like them to be "reduced" to some kind of a link contained in a cell (at the botom of the data of each chart). Then, I would like the chart to appear only if I put the mouse on this cell.
View 4 Replies View RelatedI'm trying to show a form from inside another form. Example: form1 has a command button and when clicked, I want it to show form2. But I always get a run-time error '32': type mismatch.
View 5 Replies View RelatedI have created a line chart that plots weight of a person, but want to show on the plot area what a certain range of weight represent, Ive attached images to show this concept.
View 4 Replies View RelatedI have got a lot of data to put in a chart that updates every 5 minutes with new data - i have a chart that Line chart that shows this.
It shows the cost of something every 5 minutes.
I have put this in a chart using offset but obviously i want to show the cost over the course of the day - because this updates every 5 minutes, the axis at the bottom (which has the time of the data) is massive and doesn't look good.
Is there a way to show the axis at an hourly interval but keep all the data in the chart?
I have a spreadsheet where I track income (positive) and expense (negative) items and compare budget to actual amounts. I want to create a simple bar graph comparing budgeted amounts to actual amounts for each item.
However, when I do this, I see all of my income items above the line (pointing up) and all of the expense items below the line (pointing downward).
Is there an option I can select to just use absolute values for the items so they all appear above the line?
I want to UserForm.Show and minimize Excel at the same time then restore Excel when the Form is closed.
View 4 Replies View RelatedI have worksheet with cell A1 always change simultaneously (input from other source), in cell A2 I put formula, so value in A2 always change depending value in cell A1. The problem is I want to show that value A2 in userform VBA. I tray using textbox (in property textbox control source I set to A2) but not working because Cell A2 change from formula to static value.
View 10 Replies View RelatedI have a userform that is working perfectly, but when I try to make it an add-in I can't even get it to load. When loading the userform as an add-in I get the error "Run error nr. '9'.: The Index is out of the interval" (freely translated from Swedish to English). The code I'm using to load the userform is
View 3 Replies View RelatedI have a userform with multiple tabs. I have buttons on the excel sheet that correspond with the tabs. How do I get the buttons to open up their respective tabs in the userform?
For example: Button 1 opens Userform-Tab1; Button 2 opens Userform-Tab2; Button 3 opens Userform-Tab3; etc.
Right now they all open the userform, but open the first tab.