Show UserForm From Another
Jan 10, 2008I'm trying to show a form from inside another form. Example: form1 has a command button and when clicked, I want it to show form2. But I always get a run-time error '32': type mismatch.
View 5 RepliesI'm trying to show a form from inside another form. Example: form1 has a command button and when clicked, I want it to show form2. But I always get a run-time error '32': type mismatch.
View 5 RepliesPrivate Sub UserForm_QueryClose(Cancel As Integer, CloseMode As Integer)
If CloseMode = vbFormControlMenu Then
Application.ScreenUpdating = True
Unload Me
RestrictedOptions.Show
Else
Cancel = True
End If
End Sub
Trying to use above code to unload active userform and show new userform when red X (close) selected by operator. With the code as is, the Unload Me leaves the form on the screen and displays the RestrictedOptions form. If i remove the Restrictedoptions.Show, the Unload Me does remove the original form.
how do i show a userform in Excel in the spreadsheet environment? I used to "run macro" but unable to run userform code "private sub".
View 2 Replies View Relatedhaving trouble with the details of actually making these features work for me. I figured out how to create a UserForm with a ListBox and 2 buttons, but I don't know how to proceed from here.
1. Populate the ListBox in the UserForm with a list of names from the sheet "Totals_Dropdowns", cells K2:K11
2. Make the UserForm pop up and enter the user's selection into cell C40 of the "Regenerate Request"
I know these are very basic operations, and I'm pretty sure I can figure out the rest of my problems once I can get past the above.
I have a userform button that when clicked loads another userform.
I am getting a Runtime Error 13: Type mismatch on the line in bold in the code below
Private Sub cmdAdd_Click()
Me.txtAdd.Value = Me.VarNo.Value
VariationsForm.Show
Unload Me
End Sub
I do not get an error on the "Edit" button code which is similar so why is the above not working.
Private Sub CmdEdit_Click()
Me.txtEdit.Value = Me.VarNo.Value
VariationsForm.Show
Unload Me
End Sub
I want to use the following to launch a userform I created.
Sub showuserform()
Dim ans As Boolean
ans = msgbox("do you want to show the userform?", vbYesno)
If ans = vbYes Then
userform.show
End If
End Sub
The trouble is that if I click yes, nothing happens.
I want to UserForm.Show and minimize Excel at the same time then restore Excel when the Form is closed.
View 4 Replies View RelatedI have worksheet with cell A1 always change simultaneously (input from other source), in cell A2 I put formula, so value in A2 always change depending value in cell A1. The problem is I want to show that value A2 in userform VBA. I tray using textbox (in property textbox control source I set to A2) but not working because Cell A2 change from formula to static value.
View 10 Replies View RelatedI have a userform that is working perfectly, but when I try to make it an add-in I can't even get it to load. When loading the userform as an add-in I get the error "Run error nr. '9'.: The Index is out of the interval" (freely translated from Swedish to English). The code I'm using to load the userform is
View 3 Replies View RelatedI have a userform with multiple tabs. I have buttons on the excel sheet that correspond with the tabs. How do I get the buttons to open up their respective tabs in the userform?
For example: Button 1 opens Userform-Tab1; Button 2 opens Userform-Tab2; Button 3 opens Userform-Tab3; etc.
Right now they all open the userform, but open the first tab.
I have created a user form where I have two Dates fields. Date Leave (three comboxes, CmbDay, CmbMonth and CmbYear) and then I have written the following code
Private Sub Label4_Click()
If CmbDay.ListIndex -1 And CmbMonth.ListIndex -1 And CmbYear.ListIndex -1 Then
If IsDate(CmbDay & " " & CmbMonth & " " & CmbYear) Then
MsgBox "You selected " & Format(CmbDay & " " & CmbMonth & " " & CmbYear, "dd/mm/yyyy"), , "Date selected"
[Code]....
I have got the code from there.
But I want the show the same date field in another field as Date Join. I have changed the names of Combo Boxes but it is not working.
I want to show the same combo boxes in another field. How do I do that?
I have a user form with several command buttons.
Is there a way to show that excel is calcutaing when one of the command buttons is pressed?
The button starts a series of calculation that take a while to complete.
It would appear to other users of my spreadsheet that excel or the user form is not functioning correctly.
It would be neat if there is a way to show a % complete bar. but a simple graphic or text will also work.
I'm trying to display a graph I've created in a worksheet, in a userform. But it won't work ..
Private Sub UserForm_Initialize()
Sheets("graphraw1").Select
image1 = ActiveChart.ChartArea.Select
End Sub
In a worksheet if, in any cell a number is entered to show a UserForm.
Example: If anything greater than 11 is entered show UserForm5
If anything less than 11 is entered show UserForm6
Also, If you can help with this below I dont know how to implement it.
If in any row if two cells = "Loss" show UserForm7 The word LOSS This is input thru a work sheet calculation.
If in any row if the cells contain the most WINS in that row. show UserForm8
I want to temporarily display a userform (maybe for 4seconds) when my spreadsheet loads.
I cannot grasp the ontime function, and from what I can tell most messages posted on here relate to using it for intervals, or to be used at a set time in the day. (I have looked at the Helpsheet for the Ontime function, but struggle to apply what is being said to my situation)
I bet you're getting sick of the "X" questions, and I have done an exhaustive search but the search filter kills searching for (X) or 'X' or "X" .. but nothing I did find is what I am looking to do. I have any # of userforms that when you click the "X" in the top right side, it will hide the userform... once.. Is there a fix to the code below to make it do it every time its clicked?
Private Sub UserForm_QueryClose(Cancel As Integer, CloseMode As Integer)
If CloseMode <> 1 Then Cancel = 1
UserForm15.Hide
UserForm11.Show
If CloseMode = 1 Then Cancel = 1
UserForm15.Hide
UserForm11.Show
End Sub
Like I said, I don't want to disable it, I tried that off of one of the posts I found and thats just plain annoying, I just want it to hide the one userform and show the other. This will do it once and then you can click it all you want and it wont do anything.. see the annoying trait above.. this lasts until you exit the program.. so the X button can be hit repeatedly though out the day. The userform 15 is visible, userform 11 isn't shown, IE not behind userform 15.
Can the userform be coded so that it loads somewhere other than where it appears. I know that the user can move it after it loads but it would look better moved on its own prior to it being used. I have coded ThisWorkbook which loads on a double click:
Private Sub Workbook_SheetBeforeDoubleClick(ByVal Sh As Object, ByVal Target As Range, Cancel As Boolean)
UserForm1.Show
End Sub
I need the userform to display over to the right and up a bit
I've got a sheet with 5 UserForms (1..5). Whenever I hide one with a command button there is always a piece of code securing that the basic UserForm1 will be shown in the end. But this is only so when the UserForms get hidden with the use of the command buttons. When the user simply closes the UserForms by usign the x sign he ends up with the active sheet and no UserForms present. How can I secure that closing the last active UserForm with the x sign will cause the basic UserForm1 to show up.
View 2 Replies View Relatedhow to creat a userform with a button (1) to show anouther userform with a button (2). you click the button on 1 and it shows 2. then when you click the button on 2 and it shows 1. I'm having a problem with the second part.
View 5 Replies View RelatedI've created a userform on one computer which launchs when I open the excel workbook. The userform contains comboboxs and a picture. But when i saved it on another computer and tried to open it and it errors. (Run-Time error 9). (Still works fine on the computer that created it). All references are to this workbook only. Userform is contained within the Forms folder of this workbook(not personal.xls) and the userform name is PDM_SPLASH1. Also, if i go into VBA I can see the form, but it wont launch when i try to play in manually. (Run-Time error 9)
Private Sub Workbook_Open()
Worksheets("Launch Page").Select
Worksheets("Instructions").Visible = False
Worksheets("SelectDB2").Visible = False
Worksheets("REPALIGNMENT").Visible = False
Worksheets("PDM").Visible = False
Worksheets("TABLES").Visible = False
Worksheets("DISPENSING").Visible = False
Worksheets("DISPENSED").Visible = False
Worksheets("OpportunityAnalysis").Visible = False
Worksheets("ENGINE1").Visible = False
Worksheets("POTENTIALCONTRACTLOSS").Visible = False
PDM_SPLASH1.Show
End Sub
I have aworkbook with Employee details data sheet. And, I have built two userforms to search and view the employee’s full details. I don’t know how to link the rowsource for combobox and textbox.
I have attached the excel file of what I'm trying to accomplish.
Book2.xlsm
This is the code I received for showing a userform upon open...but it's not working.
View 10 Replies View RelatedI am working on sheets("TO")
I want to popup a userform when i want to show the records
Show records condition
if Q3 is greater than > 0
Ive created a userform that I want to have input data into specific cells in my worksheet. I have the userform created, and some of the other VB stuff written, but it is far from being functional. I have come across the first of what to is to be many problems (Im pretty rusty at VB).
I have a button on my spreadsheet that is supposed to show the userform using this macro
[Code] .....
When I click the button, it breaks at "Form1.Show" giving me "Run-time error 424 : Object Required".
I need a macro that will show a userform if the value of any of three possible chekbox's is true. However if more than 1 checkbox is true I still only need the userform to be shown once. I think a goto command would work, or if I could simply say If-then-End Sub.
View 7 Replies View RelatedI have a sheet that inserts data into the next blank row. the offset 4 value is a date. Can i have it so when i click the date on this sheet it shows the userform.
what i cant get is how to do it since i dont know what row the date will be in.
My excel file triggers excel to crash after clicking the only button on my worksheet. The button displays a userform.
However; this does not always happen. It actually drives me crazy as I don't find the solution to my problem. My company were I work upgraded my Excel 2003 SP2 to Excel 2003 SP3 which seemed to help but now the same problem returned...
I found a temporarily workaround though; when saving the file first (right after I opened it) it doesn�t crash when showing the userform. Very strange (to me).
Here is my file: ....
I have a userform that shows while a macro is running. The userform just informs the user that the macro is still in progress. However, I can get the userform to show and the macro to run, but the label on the userform won't appear. Here is the code I have:
Code:
Private Sub Userform_Activate()
Application.ScreenUpdating = False
Sheets("Data").Select
[Code].....
I am trying to make a Progress bar with a statment using a Userform with a label saying Please wait. I call the form using UserForm1.Show vbModeless.The form shows and functions as needed but the label with the caption please wait is not visible. how to get the label to show?
View 1 Replies View RelatedCan a hyperlink (in a worksheet cell) be used to open/show a userform?
View 9 Replies View Related