I have a list of Insurance payers - 20 or so. They are listed in a Pivot Table on sheet2 with rate data and such. On sheet1 I have a listbox with the Payers listed and can be multi selected by the user. I wish to have the user select some payers in the listbox, goto sheet2 and view the Pivot Table only containing those Payers selected from the listbox.
View 4 RepliesI want to write a VBA code, so I can apply dates criterias to my pivot table. Say, I have 1-Dec-2007 in "C2" and 10-Dec-2007 in "C3". Now I want my pivot table to show me the dates between those two dates and the data that goes along with it. I have written this code, but it keep debugging:
Sub FilterDates()
Application. ScreenUpdating = False
Sheets("PnL").Select
Sheets("PnL").PivotTables("PivotTable3").PivotFields("Date") _
.PivotItems("01/01/1950").Visible = True 'to always have 1 populated
I have looked at the below Hide/Show Pivot Table Field Items help web pages:
Hide/Show Pivot Table Field Items
Hide Pivot Table Fields Pivot Items by Criteria
I am trying to use the above, but with dates in the following format in each cell:
YYYYMM
200612
200701
200702
200703
200704
200705
200706
etc, etc
The below code is working for >200702 and removes all years/months prior to this entered value. Unfortunately the code does not work when a user enters <200706, instead the code goes through to the “NonValidCriteria” prompt.
Sub HideByCriteriaYYYYMM()
'Declare variables
'SEE: [url]
'SEE: [url]
Dim pt As PivotTable, pi As PivotItem
Dim lMonth As Long
Dim strCri As String, strCri1 As String, strCri2 As String
Dim bHide As Boolean
Dim xlCalc As XlCalculation
Does any one know how I can resolve the calculation error that shows up in a pivot table when you select "show data as a running total in" option and you end up with a very small difference error.
In other words if I add 12.96 + 2.04 + (-15) and you get 1.455E-11 instead of zero. When these calculation errors show up in normal spreadsheet calculations outside of pivot table you can always use the ROUND function to correct these arbitrary calculation errors.
I'm looking for a recommendion for handling this in a pivot table where I have a couple of hundred columns of data that are using the "running total in" option.
On a worksheet, I created:
- a list of data
- a pivottable based on these data
When moving this worksheet this worksheet to another workbook, the pivot table can't refresh anymore. This throws an error message "Reference is not valid". To work around this problem I need to adapt the datasource. The same occurs if the list and the pivot table are on separate sheet, with the added strange behaviour that, when data an PT are split, it is not possible to move both sheet together.
This would not be a big issue if my problem had to be solved manually. The real problem is that I need to move the sheets from a C# program.
I am trying to form a macro in VBA that will basically uncheck the "Show All" function of the Pivot Table filter user interface, and then select only the one PivotItem that I want. In context, I have about 50+ different project numbers, each with a different worksheet and its corresponding pivot table. Here is what I have so far:
Dim pvtitem
With ActiveSheet.PivotTables("PivotTable1").PivotFields("Project #")
For Each pvtitem In .PivotItems
pvtitem.Visible = False
Next
End With
With ActiveSheet.PivotTables("PivotTable1").PivotFields("Project #")
.PivotItems("525064").Visible = True
End With
When I try to run it, it gives me the error: "Unable to set the Visible property of the PivotItem class". It looks like the error occurs in the loop part of the macro.
Is there a way to have a Pivot Table show only the Top 10 items based on dollar amount. Data covers a month of daily activity (+/- 250 rows), but i only want the Top 10 items based on Dollar amount. Is this possible?
I know filters can do top 10 but it doesn't consolidate similar items.
attached is a spreadsheet 6 people in my area use daily(ive copied and pasted the sheet in question to a new worksheet, as the file was too big). Ive been trying for about 3 days now to make a pivot table to summarise this data.
View 6 Replies View RelatedIn my Pivot table I have 3 fields in the "header - section" of each row
There is also the possibilty in the Page section to choose between subjects (eg physics, chemistry, biology etc) When all rows are displayed there are 68 in total
When I choose Physics there are about 30 customers that have a value in 1 of the rows. Excel shows 30 rows, but I would like all 68 row to be shown, because these are the values that are important to me. I have tried a lot of settings in the pivot table but can't find the correct 1.
What happens a lot is the the rows are "multiplied", meaning that the 1st row header has every combination of the 2nd and 3rd and so one. Which setting is needed to get what I want?
In the attached file (xlsx) under 'Database' Tab poeple have indicated their preferences (multiple choices) for different food items "specialties". The specialties are grouped under broader buckets called "groups". The specialties are bucketed into groups in a way that people end up more than once in each specialties and groups due to their muliple selections. When we create a pivot by specialties (Pivot Specialties tab), each person appears only once for each specialty...it's great. But, when we create a "group" pivot (each group has multiple specialties), now, people appear more than once for each group. Is there a way, each person can show up only once under each group so the group count does not appear to be misleading?
View 3 Replies View RelatedI am building a Pivot table and I need to show ONLY the Grand totals at the end of the table. In the example below I want to show only Total volume Stage movement at the end and not the subtotals in the columns.
Column Labels
Pipeline
Best Case
Commit
Closed
[Code]...
I am trying to to create a macro that will complete a Pivot Table, then use the Show All pages function. The data has the same number of columns each time, but the rows will differ each and everytime. The content of the column which houses the data which eventually will be a page can differ as well. I continue to get an errro and below is highlighted when debug is selected.
ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _
"Table1", Version:=xlPivotTableVersion12).CreatePivotTable TableDestination _
:="Sheet4!R3C1", TableName:="PivotTable2", DefaultVersion:= _
xlPivotTableVersion12
This is a very repititive pivot that is done many times during a month. I have tried just using the data as is then the pivot, and converting the data into a table, doesn't matter still get the error.
I would like to be able to filter my pivot table to shows the rows with no data ?
I can make "no value" appear in the pivot table in 2 ways - either by using column field as well as row fields or by using the "show items with no data" option in value field settings but I cant get filter to show only the "no value" rows
Sum of rev
Column Labels
Row Labels
[Code].....
When you double click on a number in a pivot table data area you get a new sheet with that information showing the detail, is there anyway to "trap" this action?
I want to run a macro on the detail data but can't see a way to do it automatically, have tried, BeforeDoubleClick, PivotTableUpdate, NewSheet events but all have there draw backs if you are doing something other than showing the detail for the pivot table. Of course I can just run the macro after the sheet is made but it would be nice to do it on its own.
I want to make a calculation in a pivot table where a percent difference is calculated by year.
The % difference from calculation does not show an increase from the previous year as 100% but a DIV/0 error. Can i make a custom formula that will use the year base field.
I have recorded the below macro to select a pivot table field (on demand) and show the information on anthother sheet tab.
Obviously if the order of the fields change then the macro is buggered, any ideas so it only selects the on demand field and shows that info.
Sub Macro1() ....
Can I do something so my pivot table shows Manager name in all appropriate cells (eg. agomes is A3:A4 and bschaefe in cells B5:B13)? ........
View 9 Replies View RelatedDoes anyone know a setting to display pivot tables as a % of sub total automatically within the Pivot Table Settings? I have recreated a formula on the cells H:K of what I am looking for. see Attached.
View 2 Replies View RelatedIm using the following VBA code, but the on error resume does nothing, excel throws out the error 1004 "Unable to get the pivotfields property of the pivottable class" (i know why the error is caused and how to fix it but my error trapping wont work). Is there some option which i have turned off which prevents me from trapping errors?
Dim ws As Worksheet
Set ws = Excel.Sheets("Sheet1")
On Error Goto err:
If ws. Range("IV1").Value = "dog" Then
ws.PivotTables("PivotTable1").PivotFields("Price Euros").Orientation = xlHidden
Else
ws.PivotTables("PivotTable1").PivotFields("Price Dollars").Orientation = xlHidden
End If
err:
msgbox "invalid"
I have weekly budget report (for the entire year) that I put in a Pivot Table with approx 20 different row labels. The actual revenue numbers come only once a month (several different reports make up the actual revenue numbers). I need to put the actual numbers on the same row as the budget numbers and I can't figure it out.
For example, for the first three months of the year, I have the pivot table showing everything perfectly. In February, I get January's actual revenue numbers that now "replace" the budget numbers for January. If this was a regular table, I could easily overwrite these numbers, but with the pivot table, I can't get these two fields to line up. For now, I have the Actual Revenue numbers on the Rows above the Budget numbers for their respective months/quarters.
Is it possible to just show numbers greater than an amount in a pivot table?
View 3 Replies View RelatedThe size of this pivot table depends on how many different customers are in the data tab.
What I want is a macro that will show the details as if you were to double click on the grandtotal, but the grandtotal in column c is never in the same row and I am having difficulty coming up with a macro to do this.
There are some other functions it is performing as well so I just need to add this to the existing macro code.
I have a pivottable that has a calculated field returning a percentage of two other feilds. I have pivotcharted the result and now want to include a median of the calculated feild results on the same chart.
I want to use a pivot chart as it'll accomodate changes to the data range and different page fields.
using xl2007
Have a simple Pivot table that i have grouped in 14 day buckets.
Currently, the date range looks like this:
1/21/2013 - 2/3/2013
However, I want the range to show the 'last' date only.
Is there a simple way to do this? I just can not see it in the format cells menu...
I have created a Pivot Table to sumarize the monthly sales data.
Is it possible to select just one month and show the YTD sales?
e.g. We are in September, I select August the Pivot Table should show the August sales column and YTD (Jan to August) sales column.
I'm trying to check and prompt a message box if there is a empty cells found in the pivot table.
If Activesheet.PivotTables("PivotTable1").NullString = "" Then
MsgBox "No Match Data Found"
End If
I have try out the code caption above but not the result as I want.
I'm just stuck on a final thing......I would like the pivot table to collapse based on the outcome of a formula. For instance I've got a project that has A, B, C, D as component parts, these parts all have a percentage work completed. If let's say A is a 100% complete I would like to automatically collapse A, so it will just show the summary for A. Obviously this can be done by hand, but since there is quite a lot of data I would like to automate the proces.
View 8 Replies View RelatedI work at a trading firm and use pivot tables to report on the success of traders on a daily basis. I add daily trading data to a raw data table that powers a set of reports. In one report I want to view MTD stats for a filtered group of 10 traders. The issue is that if I add a set of daily data that includes a new trader name, it will automatically be pre-checked and added to this report (and this happens daily). The only solution I came up with is to add another column in the raw data table that would allow me to group these traders and then use a page filter to include only them. This will work but I'd rather avoid adding columns to an already unruly data table (and would like flexibility to periodically define and track an arbitrary set of traders).
View 4 Replies View Relatedi have a database of the kind:
Model Version Color Store
1 a zz HH
2 b xx QQ
3 c yy OO
4 d ww PP
I need to obtain in the y axis the model, and in the x axis the store.
The data per each model and store should be: the version and color.
I'm using Pivot table to do that, but i'm only able to obtain the "count" (or sum or other formula) but I'm not able to obtain the content of the cell.
Example:
Store HH PP
Model
1 Version a d
Color zz ww
2 Version b c
Color xx yy
One of the best tools that Pivot Tables let's me use is the ability to create new tabs very easy. Anything field placed in the Report Filter is doable. My question is, is there a similar feature available in the regular data worksheet?
View 1 Replies View Related