I'm trying to check and prompt a message box if there is a empty cells found in the pivot table.
If Activesheet.PivotTables("PivotTable1").NullString = "" Then
MsgBox "No Match Data Found"
End If
I have try out the code caption above but not the result as I want.
In my Pivot table I have 3 fields in the "header - section" of each row
There is also the possibilty in the Page section to choose between subjects (eg physics, chemistry, biology etc) When all rows are displayed there are 68 in total
When I choose Physics there are about 30 customers that have a value in 1 of the rows. Excel shows 30 rows, but I would like all 68 row to be shown, because these are the values that are important to me. I have tried a lot of settings in the pivot table but can't find the correct 1.
What happens a lot is the the rows are "multiplied", meaning that the 1st row header has every combination of the 2nd and 3rd and so one. Which setting is needed to get what I want?
Hi, I desperately need help with a pivot-table and can't find anyone else who's ever had this problem...I have a very large healthcare data table which for simplicity I will describe as follows. In essence the first two columns respectively are (A) location and (B) month. Let's say the third column (C) is the number of cases of the disease kidpox treated in each health centre during that month. The fourth column (D) is the total number of cases of everything treated during that month in each clinic. The fifth column (E) is the proportion of cases of this disease over all consultations for each health centre and month, and the formula in E2 is .....
View 9 Replies View RelatedI am trying to to a vlookup on a pivot table and keep getting an error message (The error states that The formula you have entered contains a error) and excel will highlight the 0 in my formula. The formula is
=IF(ISERR(VLOOKUP(G17,'Curr Month'!$G:$H,2,FALSE)=TRUE,0,VLOOKUP(G17,'Curr Month'!$G:$H,2,FALSE)
I am writing regarding the Pivot table creation with data which contains empty rows.
Recently, I work on a project with a data which contains empty rows. I will attach the file for sample to see what sort of data contains my sheet.
As you can see the data is divided according to some criteria, and it is constantly updated by users. sometimes a new criteria is added at the end of the sheet, that is why I need to create a pivot table, to be able to just changing Source, to update the table and manipulate table in order to get desired results, but I can't remove these empty rows rom the data as far as some unexperienced users have to fill the information and it is more comfortable to have the data separated from each other for them.
However, when creating the Pivot table on this type of data, the pivot table will include the blanks Row Labels there.
I am using a Pivot Table to sort, combine, and sum data. After this is complete I want to copy the pivot table and paste it (values only) to another worksheet and use the data again. The problem is the pivot table does not fill in all the blanks and leaves empty rows. The there a way to force the pivot table to fill in the labels?
View 6 Replies View RelatedI am trying to form a macro in VBA that will basically uncheck the "Show All" function of the Pivot Table filter user interface, and then select only the one PivotItem that I want. In context, I have about 50+ different project numbers, each with a different worksheet and its corresponding pivot table. Here is what I have so far:
Dim pvtitem
With ActiveSheet.PivotTables("PivotTable1").PivotFields("Project #")
For Each pvtitem In .PivotItems
pvtitem.Visible = False
Next
End With
With ActiveSheet.PivotTables("PivotTable1").PivotFields("Project #")
.PivotItems("525064").Visible = True
End With
When I try to run it, it gives me the error: "Unable to set the Visible property of the PivotItem class". It looks like the error occurs in the loop part of the macro.
Is there a way to have a Pivot Table show only the Top 10 items based on dollar amount. Data covers a month of daily activity (+/- 250 rows), but i only want the Top 10 items based on Dollar amount. Is this possible?
I know filters can do top 10 but it doesn't consolidate similar items.
I have a list of Insurance payers - 20 or so. They are listed in a Pivot Table on sheet2 with rate data and such. On sheet1 I have a listbox with the Payers listed and can be multi selected by the user. I wish to have the user select some payers in the listbox, goto sheet2 and view the Pivot Table only containing those Payers selected from the listbox.
View 4 Replies View RelatedI am having an issue with my macro code. Basically I am trying to filter a pivot table by selected criteria. The code seems to be correctly filtering the pivot table but the table appears with no data in it unless I manually refresh the table. This defeats the purpose of automating with a macro. I have attempted a "work around" of just refreshing the pivot table after the filtering is complete but that was unsuccessful. Here is the macro code:
Sub BigReportMacro()
Dim pt As PivotTable
Dim pi As PivotItem
Dim pf As PivotField
Dim E
Sheets("Pivots").Visible = True
Sheets("Pivots").Select
'Refreshing all the Pivot Tables
[Code] .....
I have data on 400 rows. Each row has a maximum of 10 cells with data, but many have empty cells with no data. I would like to sort each row to show values of cells in sequence and eliminate empty cells. I can use the sort row function but its a long process for 400 individual rows. Is there an easier way?
View 1 Replies View RelatedIn the attached file (xlsx) under 'Database' Tab poeple have indicated their preferences (multiple choices) for different food items "specialties". The specialties are grouped under broader buckets called "groups". The specialties are bucketed into groups in a way that people end up more than once in each specialties and groups due to their muliple selections. When we create a pivot by specialties (Pivot Specialties tab), each person appears only once for each specialty...it's great. But, when we create a "group" pivot (each group has multiple specialties), now, people appear more than once for each group. Is there a way, each person can show up only once under each group so the group count does not appear to be misleading?
View 3 Replies View RelatedI am building a Pivot table and I need to show ONLY the Grand totals at the end of the table. In the example below I want to show only Total volume Stage movement at the end and not the subtotals in the columns.
Column Labels
Pipeline
Best Case
Commit
Closed
[Code]...
I am trying to to create a macro that will complete a Pivot Table, then use the Show All pages function. The data has the same number of columns each time, but the rows will differ each and everytime. The content of the column which houses the data which eventually will be a page can differ as well. I continue to get an errro and below is highlighted when debug is selected.
ActiveWorkbook.PivotCaches.Create(SourceType:=xlDatabase, SourceData:= _
"Table1", Version:=xlPivotTableVersion12).CreatePivotTable TableDestination _
:="Sheet4!R3C1", TableName:="PivotTable2", DefaultVersion:= _
xlPivotTableVersion12
This is a very repititive pivot that is done many times during a month. I have tried just using the data as is then the pivot, and converting the data into a table, doesn't matter still get the error.
I would like to be able to filter my pivot table to shows the rows with no data ?
I can make "no value" appear in the pivot table in 2 ways - either by using column field as well as row fields or by using the "show items with no data" option in value field settings but I cant get filter to show only the "no value" rows
Sum of rev
Column Labels
Row Labels
[Code].....
When you double click on a number in a pivot table data area you get a new sheet with that information showing the detail, is there anyway to "trap" this action?
I want to run a macro on the detail data but can't see a way to do it automatically, have tried, BeforeDoubleClick, PivotTableUpdate, NewSheet events but all have there draw backs if you are doing something other than showing the detail for the pivot table. Of course I can just run the macro after the sheet is made but it would be nice to do it on its own.
I want to make a calculation in a pivot table where a percent difference is calculated by year.
The % difference from calculation does not show an increase from the previous year as 100% but a DIV/0 error. Can i make a custom formula that will use the year base field.
I have recorded the below macro to select a pivot table field (on demand) and show the information on anthother sheet tab.
Obviously if the order of the fields change then the macro is buggered, any ideas so it only selects the on demand field and shows that info.
Sub Macro1() ....
Can I do something so my pivot table shows Manager name in all appropriate cells (eg. agomes is A3:A4 and bschaefe in cells B5:B13)? ........
View 9 Replies View RelatedDoes anyone know a setting to display pivot tables as a % of sub total automatically within the Pivot Table Settings? I have recreated a formula on the cells H:K of what I am looking for. see Attached.
View 2 Replies View RelatedIm using the following VBA code, but the on error resume does nothing, excel throws out the error 1004 "Unable to get the pivotfields property of the pivottable class" (i know why the error is caused and how to fix it but my error trapping wont work). Is there some option which i have turned off which prevents me from trapping errors?
Dim ws As Worksheet
Set ws = Excel.Sheets("Sheet1")
On Error Goto err:
If ws. Range("IV1").Value = "dog" Then
ws.PivotTables("PivotTable1").PivotFields("Price Euros").Orientation = xlHidden
Else
ws.PivotTables("PivotTable1").PivotFields("Price Dollars").Orientation = xlHidden
End If
err:
msgbox "invalid"
I have weekly budget report (for the entire year) that I put in a Pivot Table with approx 20 different row labels. The actual revenue numbers come only once a month (several different reports make up the actual revenue numbers). I need to put the actual numbers on the same row as the budget numbers and I can't figure it out.
For example, for the first three months of the year, I have the pivot table showing everything perfectly. In February, I get January's actual revenue numbers that now "replace" the budget numbers for January. If this was a regular table, I could easily overwrite these numbers, but with the pivot table, I can't get these two fields to line up. For now, I have the Actual Revenue numbers on the Rows above the Budget numbers for their respective months/quarters.
I'm looking to put a formula in the last column (Card Valid/Invalid (N3:N8)).
I want this formula to say IF Project Name OR Start date OR Due Date or Type OR Author OR VS are empty then I want the last column to say Invalid else if all of these columns are filled in then give valid. Also if a completed date or no. of review loops are filled in but not both then give Invalid but if both are filled in then as well as all the rest of the info give Valid.
Project Name - Valid/Invalid is B2-N2
I need a macro where user choose a value from validation, automatically lock the other cells and should show an error message.
Here is what I am looking for. User will choose Yes or no from cell H15 validation. If user choose "NO" from the validation then all other cells has to be locked in the workbook automatically except Cell H15 and a msg box needs to appear stating: "Select Yes from the validation".
Is it possible to just show numbers greater than an amount in a pivot table?
View 3 Replies View RelatedThe size of this pivot table depends on how many different customers are in the data tab.
What I want is a macro that will show the details as if you were to double click on the grandtotal, but the grandtotal in column c is never in the same row and I am having difficulty coming up with a macro to do this.
There are some other functions it is performing as well so I just need to add this to the existing macro code.
I have a pivottable that has a calculated field returning a percentage of two other feilds. I have pivotcharted the result and now want to include a median of the calculated feild results on the same chart.
I want to use a pivot chart as it'll accomodate changes to the data range and different page fields.
using xl2007
Have a simple Pivot table that i have grouped in 14 day buckets.
Currently, the date range looks like this:
1/21/2013 - 2/3/2013
However, I want the range to show the 'last' date only.
Is there a simple way to do this? I just can not see it in the format cells menu...
I have created a Pivot Table to sumarize the monthly sales data.
Is it possible to select just one month and show the YTD sales?
e.g. We are in September, I select August the Pivot Table should show the August sales column and YTD (Jan to August) sales column.
I'm just stuck on a final thing......I would like the pivot table to collapse based on the outcome of a formula. For instance I've got a project that has A, B, C, D as component parts, these parts all have a percentage work completed. If let's say A is a 100% complete I would like to automatically collapse A, so it will just show the summary for A. Obviously this can be done by hand, but since there is quite a lot of data I would like to automate the proces.
View 8 Replies View Related