how can i sort a text column by the last words after the "-" automatically. For example, this is a text column:
1. 12634 - Sweetare Dr. - Garden Grove
2. 15234 - Hotflame Dr. - Irvine
3. 16612 - Arigato - Japan
4. 22634 - Saigon - Garden Grove
I need to sort the column by the word(s) after the '-' sign.
Is there any way to remove the first part of a string of text in a cell and save the second part?
The first part of the text string is a team code that has a variable number of numbers, capital letters and sometimes spaces. The second part of the text string is a variable number of words in a team name that all start with a capital letter and have lower case letters. Every line has a different team code and team name.
The original spreadsheet also has a column with just team code. Is there a way of using this column to "subtract" the team code from the text string to just leave the team name?
I'm trying to run a script from a CAD software which exports property values into an Excel spreadsheet. I need to then sort the spreadsheet by part numbers (which are located in column G) but my script is not working correctly. My data range is A1:G50.
Const xlCenter = -4108
Const xlAscending = 1
Const xlYes = 1
Const xlSortOnValues = 0
[Code] ............
I have data with two types of records: those with "orders" in teh comments field and those with something else in that field. I'm able to sort on comments so "orders" records appear at the bottom, and insert two blank rows, separating the two datasets. Now I have to be able to set the range of the top portion. I worked on the problem, and used some of the code in the response to my post. I need to store two cell addresses.
To determine the range, I find the first blank column, then move one cell to the left, then I need to store that column's letter. AFter I find the first row with "orders" in the comments, I need to insert two blank rows and move back up to the row above that containing data (this much I've done), then store that cell's row's address. I need to use the column and row I record as the range to select for the sort. So, I basically need to things:
1. How to store the active cell's column and row
2. How to stop recording, type in code, then resume recording.
i have a list of part numbers that all have prefixes and i need to sort them into regular part number order and can't seem to figure out why i'm having such a hard time. the order i need them is this example. i need after part number 1-1 to be 1-2 followed by 1-3 etc. not 1-10 followed by 1-100. i hope i'm explaining this correctly.
View 9 Replies View RelatedI want to know how to display part of a cells text value, inside another cell.
Suppose in cell A1 i have "20-Jun-14"
How would I get cell B2 to display just "Jun"?
I try to write the function that gets some "ref" and returns appropriate item.
For example: if I give to function "C3", it returns "AAA"
if I give to function "R18", it returns "BBB" (cause it between R15 to R26)
if I give to function "R9", it returns "BBB" also.
I have a column of data with letters in each cell, no numerical, only alpha. Now, some of those cells contain the letters "adj sub" as part of the text string in each cell. "Adj sub" is always at the beginning of the text string. As an example, a cell will look like this - "adj sub mhm". I want to delete rows whose cell description does not contain "adj sub" as part of the text in the cell.
View 5 Replies View RelatedStructure:
I have a worksheet with the cells in one of the columns having html tags inside of each cell.
The tags vary by location within the cell and there are anywhere from 0-10 tags per cell.
Column A is the text string. Inside these cells are the tags. The tags are of form
<A href="/mortgagecenter/article_alias">
The
<A href="/mortgagecenter/
and
">
parts are true for every instance of this string....
....article_alias is a variable per each string. I have columns B and C which are the aricle_alias names and article_ID's, respectively.
What I am trying to do:
From the [quote]<A href="/mortgagecenter/article_alias">[quote]
I would need to replace the
article_alias
portion with
ArticleID&"-"&article_alias
I'm trying to create an Excel function that allows me to choose a row from a table based on text found within entered data. For example, say I have a table called "categories" that looks like this:
Categories
cat
dog
mouse
Now in a different section of the workbook, I want to be able to enter an arbitrary number of sentences, one per row, that look something like:
"It's raining cats."
"The mouse is hiding."....................
I have been working on this worksheet part of which is attached herewith. I would like excel to automatically enter Updated/Inserted in column B against Individuals' names as per the instructions given in column A. For example: As per instruction in A9, B13:B16 should show Updated. I have tried to use the nested if function, but it does not work as I want it to. Also as I am not used to macros or VBA codes, could this problem be solved with formulas?
View 2 Replies View RelatedIn column A i will be entering Jobs in the format : 'Customer1 Job4', 'Customer 5 Job 4'. In column B i would liek to identify the jobs automatically, so a formula that goes something like : IF(colum A contains "Job 2", "Job 2",If (Column A contains "Job 3","Job 3","")). There are only about 6 jobs but there could be many customers.
View 4 Replies View RelatedI am trying to create my household budget in Excel, but there is a sub-category.
I need a formula which will calculate the following:
Under the "Daily living" section, I have typed the names of the sub-categories, eg: ,
Groceries
General Household
Cleaning
Education/Lessons
Cash
I want it to find all totals next to the word "groceries" in the main part of the spreadsheet, where I type in my credit card statements according to date.
In other words, I want it to add up all my entries/totals next to the word 'groceries' and show the total up at the top of the document, in the "amount" column so I can see the monthly category totals at a glance.
My file is included with alot of cell in the following format:
aaaa. bbbbbbb (ccccccc)
I want to copy the first part (aaaa) into column A and to copy the second part (bbbbbbb) in column B. Both part can vary in length: in this case their length were 4 and 7 but basically they can have any length. How can i do this. See also the attached file.
I am not sure if a vlookup can do the following.
I have a spreadsheet in excel with lots of rows. In column A I have some descriptions such as:
British Pound
Danish Krone
Japanese Yen
I have created another spreadsheet 2 columns that would have something like:
column A/columnB
British/Yes
Danish/No
Japananese/Yes
This 2nd spreadsheet can grow and have more lines.
In column Z of the 1st spreadsheet, I want a formula to look at the second spreadsheet and if any word in the column A of the 1st spreadsheet matches the word in column A of the second spreadsheet, I want it to the value in column B of the second spreadsheet.
I am trying to do a vlookup and am having soem issues. I have data like this in the cell i am using as the reference: "60030 - COLUMBUS, OH". The first column of the range I am searching would have "60030" in it. What i need to know is how do I get the vlookup to just reference the first 5 digits in the reference cell? As you can see by the formula below, I set the logical value to true hoping that it would find the closest value, but it did not work. =VLOOKUP(A7,sdoalign,3,TRUE)
View 2 Replies View RelatedPlease help me get VLOOKUP to match only part of the text. I have the following situation:
In "sheet1":
___A________________B______C
1__USER3 (12346ar)___0______411 PCS
2__USER2 (45676ad)___0______313 PCS
3__USER5 (456ff)______0______112 PCS
4__USER8 (1246ew)____0______515 PCS
In "sheet2":
___A_________B________C______D
1__USER8____0_________0______=VLOOKUP(A1,'SHEET1'!$A:$C,3,0)*5
In "sheet2" , D1 I'll get #N/A if I do not type the complete name ( USER8 (1246ew) ). Is there a way to ignore this part " (1246ew)" and match only the name of the user?
Also when matching "515 PCS" can it automatically remove the " PCS" part so I can use only the number to make calculations?
I am trying to delete part of a text string for a range of cells. The code I have so far deletes the first set of letters but is looking in every cell in the range.
Ideally I would like it to only look in the cells of col B where there is data then only delete the first 10 letters if the cell begins with "Service ID"
Sub DeleteServiceID()
Dim c As Range
For Each c In Range("B1:B1000")
c.Value = Right(c.Value, 10)
Next c
End Sub
I have a column of cells with similar to the following text.
First Marine Avenue 18 1303 11 1
There will always be a final 4 groups of text numbers, each with a space
between, but each having different number of numbers (this particular
sequence has 2,4,2,1 - but others may be different, but always 4 groups)
The true text ( a series of Road names are potentiaaly all different, having
a sequence of words that may be up to 5 words long before the numbers start)
I need to extract the 4 groups of numbers into seperate cells, leaving the
Road name text in a singe cell. I would then have a table of 5 columns, the
first the Road text, and the next 4 columns being the group of numbers, which
I would then format as numbers.
I belong to a fantasy cycling league and after every race, I copy the race results to award each rider their points for the day. The site I visit most frequently lists the riders results in this format:
1. Alberto Contador (Spa) Team Sax Bank Tinkoff 4:05:00
2. Lance Armstrong (USA) Team Livestrong etc... 4:06:00
I usually copy the results to my spreadsheet then calculate each riders points.
The'results end up looking like this in Excel:
1. Alberto Contador (Spa) Team Sax Bank Tinkoff 4:05:00
2. Lance Armstrong (USA) Team Livestrong 4:06:00
So, the data ends up in 3 cells. The position in one cell, the rider and their nationality and their team in another, and the time of arrival in another cell
Is there a way in Excel where I can get rid of or delete all the data after a rider's name?
I usually end up pasting the rider information to Word, then replacing the (***) with a tab symbol, then pasting back to Excel and get rid of the data that's after the name by deleting the cells to which that data was transferred.
Is there an easier way to do this in Excel, or a macro I can create?...
Is it possible to lookup if at least 8 characters of a text string is found in another text string?
View 9 Replies View RelatedIs there any way I can Vlookup for just part of a text stiring in a cell.
I am trying to vlook if a part number contains the letters “HFR” if it does I want
It to refer to the comment I have made in the second column of my vlook table against HFR.
I have a simple sentence in cells C3, D3 and E3. The sentence in C3 is:
Find Airfare to Chicago, Airline Tickets to Chicago, and More | XXXXXXXXX®
D3 contains: XXXXXXXXX highlights outstanding airfares to Chicago from quality airlines and agencies. E3 contains my list of keywords: Chicago Flights, Cheap Flights to Chicago, Cheap Chicago airline tickets, chicago flight, chicago airfare, chicago airline ticket, chicago airline tickets
The XXXXXXXXX in the C&D cells is the client name which I had to blank out in order to post here. I wasn't sure if you guys would need to know exactly how many characters there are in each cell. In column B3 is the name of the city, in this case the city is Chicago. I have 8000 destinations so I need a formula that will take the city (or any information) in the B column and replace that in the C, D and E columns in the appropriate place. I've attached a small, representative file to demonstrate.
I would like to use some vba code to search range T3 to U500
and search for the word "all out" which will appear within the text of some cells - in the format :-
64 all out(36 overs)
and replace it to
64 all out(50 overs)
the two digit total at the beginning of the line can be 1-3 digits and the number of overs can only be 1 or 2.
Is there a formula where it will find all that reads 07-06 and be able to change it to 08-06? Below are samples of formulas where I am looking to change 07-06 to 08-06 without having to go into each cell and manually changing 07-06 to 08-06:
= SUM(IF('07-06 data'!$C$2:$C$103="CAM",IF('07-06 data'!$I$2:$I$103="INCOMING - NEW",1,0)))
=SUM(IF('07-06 data'!$C$2:$C$103="MSP",IF('07-06 data'!$I$2:$I$103="INCOMING - NEW",1,0)))
=SUM(IF(('07-06 data'!$C$2:$C$103="CAM")*('07-06 data'!$I$2:$I$103="INCOMING - NEW"),'07-06 data'!$J$2:$J$103))
I am creating a sheet with the cell information coming from different cells. I want to bold and/or underline a part of the cell to add clarity.
For e.g.
Cell A1 = "Trans X" (Name of the transaction);
Cell B1 = "System Y" (System where the transaction exists)
Cell C1 = "Type Z" (Type of transaction)
I want to create a cell which has
Newsheet.Cell (x,y) =
"Name: Trans X
System: System Y
Type: Type Z"
I created the String by reading and concatenating the values, but I am not sure how to add the formatting to a part of the string.
I am trying to reference text and another document. The text I want is " stock option expense negatively impacted 1Q:07 by:" and the number i want it to bring back is currently in the model as a percentage. However I would like to bring it back in basis points which would be the percentage times 10,000. So if its in the model as 0.4%, I'd like to bring it back as 40 bps. Here is the formula I am using that is insufficient.
="Stock option expense negatively impacted 1Q:07 by: " & TEXT([FOSL2.xls]QTR!$BK$34,"0") & " bps."
I want to put text after firsr 15 chars to new row.
View 5 Replies View RelatedConsider the following:
Cell A1 has this text in it:
WT*495*001559369~G3**D1234567**XX**20070626*1740****DHLC*20070807~B4G*RX*1~C32*UDD**UAD~ITQ*05*3****20030711*12~N1*FF*LALALA*25*00802109480~N3*12A46 KRESSASLE
Is it possible to somehow filter, search, find, etc, and basically clean cell A1 so that in the end it has just G3**D1234567?
I made a search macro, but the problem is there is so much text that it takes 2 seconds per cell to do a find. There are 6 columns with 65000 rows. I assume if I clean up each cell and do a "xlWhole" instead of "xlPart" in the find code, it will be much faster.
A1 = WT*495*001559369~G3**D1234567**XX**20070626*1740****DHLC*20070807~B4G*RX*1~C32*UDD**UAD~ITQ*05*3****20030711*12~N1*FF*LALALA*25*00802109480~N3*12A46 KRESSASLE
Result:
A1 = G3**D1234567
Possible?
Note that all rows do have a "~G3**" before the actual number I am doing a search for.
CREATE TABLES LIKE BELOW?Column 1 Column 2
8 6CSS130 + 2CSS200g x10hanger 200 GM
250ml B2G1 Towel in bagx24 0607 250 ML
18 g-Mint 18 GM
100g 100 GM
150GM 150 GM
i have a data as above, i wanna to extract the 250ml from the column 1, only 250ml (basically i want to extract the size code like 150g, 100gm from the data above).