Is there any way I can Vlookup for just part of a text stiring in a cell.
I am trying to vlook if a part number contains the letters “HFR” if it does I want
It to refer to the comment I have made in the second column of my vlook table against HFR.
Is it possible to lookup if at least 8 characters of a text string is found in another text string?
View 9 Replies View RelatedI am trying to reference a Name of a place from an order number. To illustrate, University Park, IL can have an order # of 6598641373. The only thing is, all I need to reference is the first four digits, 6598. The other worksheet does not have city and state names, they only have the order #s.
View 10 Replies View RelatedIs there any way to remove the first part of a string of text in a cell and save the second part?
The first part of the text string is a team code that has a variable number of numbers, capital letters and sometimes spaces. The second part of the text string is a variable number of words in a team name that all start with a capital letter and have lower case letters. Every line has a different team code and team name.
The original spreadsheet also has a column with just team code. Is there a way of using this column to "subtract" the team code from the text string to just leave the team name?
My sheet contains values like these:
A/5
A/3
B/4
What I want to do is sum all the values after the / for a particalur value before the /:
A 8
B 4
I already tried VLOOKUP, but this function wants you to point to a certain cell to return instead of a just a part of the cell. It should return 5 for the first row to be able to perform a sum for every value of A.
How can I perform such a calculation without having to copy the values to separate cells? Can I contain all of this in one function?
Im sure this cant be done because it defies the logic of the LOOKUP function but I know there are some clever people on here so i thought id ask!!
I have 2 workbooks containing similar data from 2 different sources; the one common data item in both is a clients address but have the age old problem of data quality, which needs sorting eventually but i need a quick fix!
In workbook one for example the address will be recorded as RUSKIN RD
In workbook two the address will be recorded as RUSKIN ROAD
A simple look up wont work obviously as the 2 values dont match, then i thought of using the LEFT function but again this goes against the logic of the VLOOKUP.
I'm trying to use this formula to lookup the value in the array that matches, however, the first 4 numbers aren't known (thus why I'm doing the lookup) =VLOOKUP("*"&C2, 'KLIF Data'!A:C,1,0)
The * is being interpreted as a character, is there a way to perform the Vlookup function using a wildcard? Or just ignoring the first 4 characters of the cells in the array would work.
If I have a store number (say 1234) and I am trying to search for something which contains 1234 (i.e. the whole string of ABCD1234, ABCD1235, ABCD1236 etc) is it possible to do this in one VLOOKUP formula?
One way of doing it would be to VLOOKUP("ABCD"&"1234",....) but I would rather do it the other way around, to prevent the formula from not working.
I have been using an IF,ISNA,VLOOKUP formula as follows which I am sure you are all familiar with :
=IF(ISNA(VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0)),"",VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0))
This formula works correctly, displaying the lookup value for K7. My query is between the"" I can place text to display when K7 is blank and this works correctly too. However I would like to place a formula in here. The formula is VLOOKUP(I7,Orig!A7:B35,COLUMNS(B7:B35)+1,0 i.e. the lookup value is now I7 and not K7 when K7 is blank.
I have tried the following and variations based on what I know but they return errors.
=IF(ISNA(VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0)),(""& VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0),VLOOKUP(K7,Orig!A7:B35,COLUMNS(B7:B35)+1,0))
Any better way of using I7 as the lookup value when K7 is blank.
I have a column of data with letters in each cell, no numerical, only alpha. Now, some of those cells contain the letters "adj sub" as part of the text string in each cell. "Adj sub" is always at the beginning of the text string. As an example, a cell will look like this - "adj sub mhm". I want to delete rows whose cell description does not contain "adj sub" as part of the text in the cell.
View 5 Replies View RelatedI am trying to delete part of a text string for a range of cells. The code I have so far deletes the first set of letters but is looking in every cell in the range.
Ideally I would like it to only look in the cells of col B where there is data then only delete the first 10 letters if the cell begins with "Service ID"
Sub DeleteServiceID()
Dim c As Range
For Each c In Range("B1:B1000")
c.Value = Right(c.Value, 10)
Next c
End Sub
I belong to a fantasy cycling league and after every race, I copy the race results to award each rider their points for the day. The site I visit most frequently lists the riders results in this format:
1. Alberto Contador (Spa) Team Sax Bank Tinkoff 4:05:00
2. Lance Armstrong (USA) Team Livestrong etc... 4:06:00
I usually copy the results to my spreadsheet then calculate each riders points.
The'results end up looking like this in Excel:
1. Alberto Contador (Spa) Team Sax Bank Tinkoff 4:05:00
2. Lance Armstrong (USA) Team Livestrong 4:06:00
So, the data ends up in 3 cells. The position in one cell, the rider and their nationality and their team in another, and the time of arrival in another cell
Is there a way in Excel where I can get rid of or delete all the data after a rider's name?
I usually end up pasting the rider information to Word, then replacing the (***) with a tab symbol, then pasting back to Excel and get rid of the data that's after the name by deleting the cells to which that data was transferred.
Is there an easier way to do this in Excel, or a macro I can create?...
CREATE TABLES LIKE BELOW?Column 1 Column 2
8 6CSS130 + 2CSS200g x10hanger 200 GM
250ml B2G1 Towel in bagx24 0607 250 ML
18 g-Mint 18 GM
100g 100 GM
150GM 150 GM
i have a data as above, i wanna to extract the 250ml from the column 1, only 250ml (basically i want to extract the size code like 150g, 100gm from the data above).
I am looking for a formula to delete information from the middle of a text string. I have ~ 1,000 lines of data. Each text string is composed of the same way. The data I am looking for is two parts of the string (1) all the text up to and including the first “%” character (2) the last six characters.
Raw Data
CARDINAL HEALTH 5.5%13CARDINAL 5.513 CARDINAL HLTH 5.5 061513
UST BILL 0%09US TREAS BILL 0%09 UST BILL 0.0 092409
WORLD SAVINGS 4.125%09WORLD 4.125%09 WORLD SVGS 4.125 121509
JP MORGAN 5.375%12JP 5.375%12 JPMORGAN CHS5.375 100112
Desired Result
CARDINAL HEALTH 5.5% 061513
UST BILL 0% 092409
WORLD SAVINGS 4.125% 121509
JP MORGAN 5.375% 100112
I have to sort list of thousands name (3000 names) and remove duplicates. My problem is majority of the names have their title (i.e) Prof. Dr. Ir. Sir. etc typed in, so I need to copy the title in different cell and have their name only. Here's what I expect:
Current List ----> Column A -->Column B
Drs. H. A. Andrew Boston, MRE. ----> Drs. H. --> Andrew Boston, MRE
Drs. H. Andrew Smith ----> Drs. H. --> Andrew Smith
H. Abd. Mohammed Junus ----> H. --> Abd. Mohammed Junus
Prof. DR. Jane Doe, MD ----> Prof. D --> Jane Doe, MD
Prof. DR. Ir. H. Randy Wong, MBA --->Prof. DR. Ir. H. -> Randy Wong, MBA
Dra. H. A. Karen Patel ----> Dra. H. --> Karen Patel
Drs. H. A. M. Kangkong ----> Drs. H. A. --> M. Kangkong
Prof. Drs. H. A. Kareem Saleh, Ph.D -> Prof. Drs. H. A. ->Kareem Saleh, Ph.D
Dra. Hj. Nina Schorder ----> Dra. Hj. --> Nina Schorder
Ir. Abdul Jabbar ----> Ir. --> Abdul Jabbar
I am trying to do a vlookup and am having soem issues. I have data like this in the cell i am using as the reference: "60030 - COLUMBUS, OH". The first column of the range I am searching would have "60030" in it. What i need to know is how do I get the vlookup to just reference the first 5 digits in the reference cell? As you can see by the formula below, I set the logical value to true hoping that it would find the closest value, but it did not work. =VLOOKUP(A7,sdoalign,3,TRUE)
View 2 Replies View RelatedPlease help me get VLOOKUP to match only part of the text. I have the following situation:
In "sheet1":
___A________________B______C
1__USER3 (12346ar)___0______411 PCS
2__USER2 (45676ad)___0______313 PCS
3__USER5 (456ff)______0______112 PCS
4__USER8 (1246ew)____0______515 PCS
In "sheet2":
___A_________B________C______D
1__USER8____0_________0______=VLOOKUP(A1,'SHEET1'!$A:$C,3,0)*5
In "sheet2" , D1 I'll get #N/A if I do not type the complete name ( USER8 (1246ew) ). Is there a way to ignore this part " (1246ew)" and match only the name of the user?
Also when matching "515 PCS" can it automatically remove the " PCS" part so I can use only the number to make calculations?
I have a worksheet with following values:
A
B
C
1
Shorts
75
[Code]...
Also I have a Userform with 2 ComboBoxes named "ComboBox1" and "ComboBox2". Values in ComboBox1 is "Pull my pants", "Eat my shorts", "Socks for everyone".
What I would like to do is to search though column A and look for any of these textstrings in my selection in ComboBox1 and return the value from column B in column C.
Example: "Pull my pants" is selected in ComboBox1 then the value "pants" should be found in column A and value in column B (25) should be entered in cell C2.
I am fairly new to VBA and have spend hours searching Google and found some formulas like InStr and VLookup. My problem is that I am not sure if these statements will do the job and how to combine them.
I am wanting to look for a string of text within the "lookup_value" that matches the text that's in the "table_array".
View 9 Replies View RelatedI do have a price list for my inventory for each product code (only letters)
E.g. productA 100
productB 200
When I'm writing in the order list, I'm writing in a single cell product code + size e.g. productA 5, productB 7
I need to get the corresponding price for each cell.
I need to to highlight keywords within a block of text (string). I don't need to necessarily return a value with the VLOOKUP. I just need to compare keyword list in Column B to the Text in Cell A1. If the word from the list appears in the text, I need it to be highlighted for every instance.
EXAMPLE
Text String (A1)
Welcome to Jake's Car Accessories website. We have all of your car accessory needs including car covers, truck covers, custom car grills and other car accessories.
Keyword List (Column B)
car accessory
car covers
truck covers
car accessories
I think VLOOKUP only works on lists.
I have searched other postings but can’t seem to find the answer.
I was wondering if anyone had a solution on how to string multiple Vlookup results as a text string so that if I Vlookup “Pear” it will return “Red, Blue, Green” in adjacent cell
i.e
A B
1 Fruit Colour
2 Pear Red
3 Orange Purple
4 Apple Green
5 Banana Yellow
6 Pear Blue
7 Pear Green
8 Banana Black
9 Orange Green
10 Apple Black
Is Vlookup the right function to go with here?
I have a Vlookup which I want to modify so that it can become dynamic as the table array part of the vlookup will change.
So the basic vlookup is as follows:
=VLOOKUP($R$3,ATTRIBUTION_FACTSET!$M$60:$P$73,2,0)
but the data I am looking for wont always be in the range M60:P73.
So I tried to make it dynamic by doing the following:
=VLOOKUP($R$3,INDIRECT("ATTRIBUTION_FACTSET"&"!M"&U1&":P"&V1),2,FALSE)
The idea being that U1 and V1 would be numbers that can change so in this case U1 would equal 60 and V1 would equal 73
This vlookup is giving me #N/A and no matter how I modify it I cannot get it to work.
formula that will pull out the number preceding the * 60 in the text below? In this particular case I would be looking to get 5 as the result. That number could be any number but in the example below it happens to be a 5.
Channel Tune Duration in Seconds} (ID) >= (5 * 60))
I have a list of data that populates B2:B2900
This data is often prefixed by a 'reference code' that I wish to be removed.
Now rater than perform this manually aprox 3000 times is there a formula or some VB code that will complete this for me....
eg
The list of data is shown like:
SC7547-05 - Payne, Freda
SC8706-08 - Rungren, Todd
SC8714-05 - Travis, Randy
SC7517-03 - Beach Boys, The
Love Song
Now You're Gone
SC7512-01 - Horton, Johnny
SC8721-15 - Journey
So I wish for the SC7547-05 - to be removed from the first example to just leave Payne, Freda and continue this throughout the list
However if the data is found not to include this code (as in the 5th/6th examples above) leave it alone
So if the code of formula is run for the above the outcome would be....
Payne, Freda
Rungren, Todd
Travis, Randy
Beach Boys, The
Love Song
Now You're Gone
Horton, Johnny
Journey
TX_jhfft_DATA.05-32_65 TGIF
I need to take out the number in the middle, from the period to the space. The number varies in length so just using the mid function doesn't work. Does anyone know how to modify the mid function to return all chars between the period and the space or is there some other function that may work?
I have a conditional formula which gives a value based on what the User specifies.
Example of formula is:
=IF($B$1=0,"CONTACT PERSON - OPTIONAL",IF($B$1=5,"CONTACT PERSON (FINANCE ONLY) - MANDATORY",""))
If the result of the string is " CONTACT PERSON (FINANCE ONLY) - MANDATORY " then
- word MANDATORY (not the whole string) should be in RED
- words (FINANCE ONLY) should be in BLUE
- remaining string should be left in BLANK
Not intending to use VBA. Is this possible?
I am currently working on creating a dialogue which will allow the user to input a range of worksheets to use for a pivot table.
I want the user to be able to input a variable into the dialogue. For example, I want the input "n-5 - n-1" to mean the 6th from last to the 2nd from last sheets. I am trying to find n - ([0-9]+)? and replace it with Worksheets.Count - $1. In other words, if there are 10 sheets, I want to transform "n-5 - n-1" into "5 - 9".
Here is the code I have so far:
[Code] ....
This has been working for strings like "n" or "n-4" but not "4 - n-3" or "n-5 - n-1".
Here is the code I use afterwards to interpret the string once the n's have been replaced:
[Code] ....
I'm new to Regex and VBA in general.
Find part of string and delete. I have the following type of string:
View 4 Replies View RelatedHow do I copy the numeric part(11 Digits) of a cell
EG. A1 = "GL CREDIT DDA07 60291627599 ZFT"
I Require "60291627599" in A2
Descr
ANSWER
GL CREDIT 62180577391@DDA ZFT
62180577391
GL CREDIT 62300192854 62300192854 DDA06 ZFT
62300192854
GL CREDIT ACC REC 62273991367 ZFT
62273991367
The numeric 11 digit number is not always in the same position in the cell.