I'm attempting to use Vlookup to find order numbers and the orders date of completion. However the reports that I am using are formatted differently so the order numbers are not exact. One spreadsheet lists the internal order number and the other lists the external order number. IE 123456 8119(123456001) Is it possible to specify a string of numbers within a cell using vlookup? Or should I look at another function?
View 5 Repliesget the name of the File in a Vlookup VBA using wildcard characters. I have to do a VLOOKUP from a specific file which is stored in the same folder as the file in which I need to get this VLOOKUP done, however the name can change anytime keep a word common only for this specific file...
Ex:
I have a File called "Mapping as on 8th May" from where i need to lookup some information for my file and I intend to do this using VLOOKUP in VBA in a Module but since the name can change to anything such as"Mapping as on 16th May" I cant use it in the VBA code, so is there a way around this where If I have this file stored in the same folder then I keep the word "Mapping" specific and unique for all other files in the same folder that the search can pull this file name to be further used in my lookup..
how to use the wildcards in VLOOKUP lookup range for the file name as the columns are going to remain the same...
In one spot I have a formula that is pulling the last two characters of a cell (right,xx,2).
It results in a number. I am trying to that number in a vlookup
(=VLOOKUP(C2,data!$C$1:$D$6,2,FALSE))
But it appears not to recongize the number (c2), because I am getting #N/A for a result, even though the number is on my vlookup range.
I have a VLOOKUP formula that works when searching some cells but not others when both cases should work.
Q: Does VLOOKUP have a certain maximum amount of characters it can search? If a cell contains more than this amount of characters will VLOOKUP not work?
This is what seems to be happening on my spreadsheet. The VLOOKUPS that refer to the cells with more than the average amount of characters seem to fail. The same happens with INDEX.
I have a sheet with Names in it. I need to look those names up and find which org they belong to. The problem is the the names have many characters after them, and many names belong to a few orgs, with a the rest belonging to many orgs. (See below)
I have been trying to get a Vlookup to work, but since it can't go left, it won't look up the orgs that don't own at least three names. And I can't get the search to work on the names.
Names:
WSGHG1-8410YFH
WSSMXG-8401B8T
NBSMXG-0310V6R
NBXG-0310V6V
[code]....
I have a table as below (you can also refer to the attachment) and need to do the vlookup with EE Code if the left 2 characters of "EE Code" = 91 to 95.
EE Codedeptif left 2 characters of EE code= 91 to 95, vlookup dept code
921600012345678
vlookup arraryA12345623456700
39914123 test785637039914123
38214125 test915580057889056
40964197 test932660038214125
77014155 test913580039914123
345699940964197
945800077014155
953790300123432
915800012345678
045699957889056
585637039914123
Is there an Excel formula to remove the spacebar + characters in red, as shown below? I need to be left with only the last name, first name and the semicolon.
Mouse, Mickey ;
Microsoft Outlook has changed the way that email addresses from the global addressbook copy and paste (from version 2003 to version 2010).
I'm trying to use conditional formatting to highlight cells in a column that have less than 8 characters.
I know the LAN function, but I don't know how to make it work for the conditional formatting.
So we have people's names in a table. First name in one column and last name in another column. We have a 3rd column where we can use 8 characters to do a combination of First 5 of Last Name + first 3 of first name. However, if someone's last name is only 3 or 4 characters, we'd then want to take more from the first name to fill out the 8 characters.
So:
Charles Johnson -> Johnscha
John Smith -> Smithjoh
Willian Wu -> Wuwillia
What's the best way to do that without creating some crazy formula with tons of if/thens?
I have a Vlookup which I want to modify so that it can become dynamic as the table array part of the vlookup will change.
So the basic vlookup is as follows:
=VLOOKUP($R$3,ATTRIBUTION_FACTSET!$M$60:$P$73,2,0)
but the data I am looking for wont always be in the range M60:P73.
So I tried to make it dynamic by doing the following:
=VLOOKUP($R$3,INDIRECT("ATTRIBUTION_FACTSET"&"!M"&U1&":P"&V1),2,FALSE)
The idea being that U1 and V1 would be numbers that can change so in this case U1 would equal 60 and V1 would equal 73
This vlookup is giving me #N/A and no matter how I modify it I cannot get it to work.
I have a sheet using VLookup to find EMail and Web addresses. I can get the address to show up but not as an active URL address. Is it possible to have the address "active" so I can click on it and activate the EMail or Web Site?
View 5 Replies View RelatedI'm trying to do a Vlookup on a file that gets automatically downloaded to the computer from a website. The data is in lots of different data sets, like so:
Loans to countries
Mar
Apr
May
Jun
Loans to banks
Mar
Apr
May
Jun
Every month a new row of data gets added to each table, meaning the start and end cells of the array also shift each time.
I'm currently trying to vlookup the same data from 2 different sheets. Here is the code i've tried.
View 4 Replies View RelatedI’m trying to develop a workbook which holds monthly data on loan information. It tracks the interest and balance on the loan. I want the first page to have a table displaying the interest payments for every individual tab. When I was brainstorming the idea, I was considering a sort of Vlookup function to find the tab the account is on and then a further function, possibly another vlookup which connects the month to that month’s interest payment. Can anyone help me figure this out?
The attached spreadsheet is obviously simplified, there are well over 30 tabs. But I would like it to, ideally, search the account number column, search the workbook for that account number, and then when on that page use the month at the top of the first page and retrieve the interest payment and put it back in the cell. It’d also be great if the formula can be transferred between workbooks. I’m not sure if that makes sense; basically if I were to copy that worksheet into the next months book, I would like that the formula read those tabs instead of becoming obsolete due to references from the first workbook.
I have data in a pivottable which I want to compare with another table. The lastcolumn+1 of the pivottable needs to get data from another table. I have this for an example:
View 5 Replies View RelatedI have a spreadsheet (Need Data.xls) that needs to be filled out with a couple columns of data.
This data lays within 338 spreadsheets which have many items and may only have 2, or 3, or 50 that belong on my Need Data.xls spreadsheet.
I have a tab in Need Data.xls named "DIR" which has a list of 336 excel files that need to vlookup'd into.(not a separate file) They're all setup with this format:
I am receiving a run-time error with following code. The error message is "unable to get the VLookup property of the WorksheetFunction class". I only receive the message when the lookup value is not found in the table.
I thought adding the "False" command at the end would return an "N/A" but it didn't. Is there anything I can add to avoid this error?
I have a string of names that run together without spaces or commas between each name.
"Danny TrejoJean Claude van DammeVincent SchiavelliGabrielle FitzpatrickDavid 'Shark' FralickPat Morita" for example.
Is there a way to add a comma and space when an upper case letter is immediately followed by a lower case letter?
How can I make combobox have only first 18 characters from a cell to appear, Have tried max lengh to 18 but still on the output it shows the full string... or an alternative how can i fix sheet column to 18 characters input ????
View 2 Replies View RelatedOk so my formula simply wants to substitute a really long string of text with a blank cell. Problem is that the really long string of text goes over the 255 char limit for a formula.
How can I go about solving this problem. I think you could name the string of text as a variable such as "long text" and then use the substitute formula as such:
=SUBSTITUTE(A1,"long text", "")
Something like that? I don't know if it would work or the steps to name the variable.
I'm trying to make a chart viewer on the first sheet of my spreadsheet and am using this website as a guideline, [URL] However instead of the 3 charts in the example, I have 12 which makes my formula for defining a name substantially longer.
By moving my charts to the same sheet and getting rid of the INDIRECT formulas, I shortened my formula to 291 characters which is too long as the limit is 255.
=IF($G$9="Sodium",$N$34,IF($G$9="Manganese",$N$35,IF($G$9="Iron",$N$36,IF($G$9="Nitrate Nitrite",$N$37,IF($G$9="Nitrite",$N$38,IF($G$9="Nitrate",$N$39,IF($G$9="PH",$N$40,
IF($G$9="Conductivity",$N$41,IF($G$9="Turbidity",$N$42,IF($G$9="Fluoride",$N$43,IF($G$9="Selenium",$N$44,$N$45)))))))))))
Is there any way to make my formula shorter? Or to reference a cell where I place the formula?
When I try to enter 18 numeric characters in a single cell, the last three characters are converted to zeros. I can find no format that would allow me to see all 18 entered characters. Is there a way of doing this?
View 2 Replies View RelatedI've searched Excel's Help but still unsure how to do this. I hope excel experts here can lend me a hand...
I have literally thousands of words in a single columns column which looks like this:
absah
absen
absenan
absensi
abses
absis
absolusi
absolut
absolutisme
...
...
...
etc
My question is what formula if i'd have to enter to add three spaces between characters and five characters at every end of the word so it should look like this?:
a b s a h .
a b s e n .
a b s e n a n .
....
....
etc
Note i have entered a full stop at the end of the example above to make the five spaces visible in this demonstration (I dont need the period character inserted at all).
I have a table that have a test or character and value (number) like
A 5
B 6
C 3
And another table that has a set of characters that I want to sum the value of the characters like
A B C 14
So that the result of summing the characters will be in the next cell.
I use excel for keeping a database of all the movies I have seen.
My problem is in regard to the value of characters. I sort my movies by default alphabetically and am wondering if there is any way to exclude the word 'The' from the sort. Traditionally when movies are sorted alphabetically, that word does not count, but obviously my problem is that excel is indeed including it.
There is also another problem regarding the value of characters. When I rate movies less than a '6' I would like to write it as "<6". The problem is that excel actually reads the "<" symbol as being of greater value than numbers and will put any movie rated "<6" at the top of the row when I sort largest to smallest. Is there any way to change the value of the "<" symbol so that my movies rated "<6" will be sorted below all my other rated movies?
I have a code that acts a little like pivot tables where it copies a few columns from the workbook into a different sheet.
The thing about the new sheet is that under column G i only need the first 6 characters and not the 3 words that follow it.
I was able to get the code use only the first 6 characters but it extends to the entire sheet!
How to limit this to only column G as opposed to the entire sheet?
I need to remove/trim in column B the last three characters in each cell so that I am only left with the first 12 characters.
View 3 Replies View RelatedI have a column that has all the digits in the phone number. What I would like to do is remove the first 8 characters example 111-222-3333. I want to remove all the ones dash twos and dash. Can someone help me please ?
View 7 Replies View RelatedI have a coumn starting from A2 onwards that holds data with various characters, all that i require is the 1st 9 characters (These are always numbers).
View 6 Replies View Relatedcell A1 contains:
001001 28 EA 12 CATALOG #: 9358171
I would like to get all the characters in between the word EA and CATALOG and put them in B1 and so on....